BES 2023 $10+ Products - (25001 Products)
MS4ECD0500L45S06 CARBIDE ENDMILL
Item #: MB03331571
Brand: Mitsubishi Materials USA
Model #: 331571
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5 mm |
| End Shape | Square |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Body Half Taper Angle (BHTA) | 15 Degrees |
| Depth of Cut Maximum (APMX) | 5 mm |
| Peripheral Effective Cutting Edge Count (ZEFP) | 4 |
| Overall Length (OAL) | 45 mm |
| Length Group | Extra Short |
| Coating | MS |
| Measurement Type | Metric |
| Flute Count (NOF) | 4 |
| Series/List # | MS4EC |
| Flute Helix Angle (FHA) | 30 Degrees |
$ 52.88
5/32″ Dia. × 3/16″ Shank × 5/16″ DOC × 2″ OAL, Carbide TiAlN, Spiral , 4 Flute, CW Helix, Round, Ballnose End Mill
Item #: BA10B69309
Brand: Bassett
Model #: B69309
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/32″ |
| Length Group | Regular |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| End Shape | Ball Nose |
| Depth of Cut Maximum (APMX) | 5/16″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 2″ |
| Decimal Equivalent | 0.1562″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlTiN |
| Series/List # | MSE-4B-TA |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | CW |
| Center Cutting | Yes |
| Shank Type | Round |
| Single / Double End | Single End |
| Tool Type | End Mill |
$ 47.03
MS2XLD1/16N0375 CARBIDE ENDMILL
Item #: MB03317235
Brand: Mitsubishi Materials USA
Model #: 317235
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Usable Length (LU) | 3/8″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Neck Diameter (DN) | 0.0601″ |
| Depth of Cut Maximum (APMX) | 1/16″ |
| Body Half Taper Angle (BHTA) | 12 Degrees |
| Overall Length (OAL) | 2″ |
| Peripheral Effective Cutting Edge Count (ZEFP) | 2 |
| Coating | MS |
| Length Group | Long - Necked |
| Flute Count (NOF) | 2 |
| Decimal Equivalent | 0.0625″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Measurement Type | Inch |
| End Shape | Square |
| Series/List # | MS2XL_INCH |
$ 52.73
MS2XLD1/16N0750 CARBIDE ENDMILL
Item #: MB03317251
Brand: Mitsubishi Materials USA
Model #: 317251
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Usable Length (LU) | 3/4″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Neck Diameter (DN) | 0.0601″ |
| Depth of Cut Maximum (APMX) | 1/16″ |
| Body Half Taper Angle (BHTA) | 12 Degrees |
| Overall Length (OAL) | 2″ |
| Peripheral Effective Cutting Edge Count (ZEFP) | 2 |
| Coating | MS |
| Length Group | Long - Necked |
| Flute Count (NOF) | 2 |
| Decimal Equivalent | 0.0625″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Measurement Type | Inch |
| End Shape | Square |
| Series/List # | MS2XL_INCH |
$ 52.73
13/32″ × 3/8″ × 13/16″ × 2-11/16″ RHS / RHC HSS HSS Single End 2-Flute Center Cutting End Mill - Bright
Item #: CE60C33742
Brand: Cleveland Twist Drill
Model #: C33742
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 13/32″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 13/16″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 2-11/16″ |
| Decimal Equivalent | 0.4062″ |
| Cutting Edge Material | HSS |
| Measurement Type | Inch |
| Coating | Bright |
| Series/List # | HG-2 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Weldon |
| Single / Double End | Single End |
| End Shape | Square |
$ 46.99
11/32″ × 3/8″ × 1-1/2″ × 3-1/4″ RHS / RHC HSS HSS Single End Mulit Flute Center Cutting Finishing End Mill - Bright
Item #: CE60C33374
Brand: Cleveland Twist Drill
Model #: C33374
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 11/32″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 3-1/4″ |
| Decimal Equivalent | 0.3438″ |
| Cutting Edge Material | HSS |
| Measurement Type | Inch |
| Coating | Bright |
| Series/List # | HG-4C |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Weldon |
| Single / Double End | Single End |
| End Shape | Square |
$ 46.92
MS2XLD0050N040 CARBIDE ENDMILL
Item #: MB03288796
Brand: Mitsubishi Materials USA
Model #: 288796
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.5 mm |
| Usable Length (LU) | 4 mm |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| Neck Diameter (DN) | 0.46 mm |
| Depth of Cut Maximum (APMX) | 0.7 mm |
| Body Half Taper Angle (BHTA) | 12 Degrees |
| Overall Length (OAL) | 45 mm |
| Peripheral Effective Cutting Edge Count (ZEFP) | 2 |
| Coating | MS |
| Length Group | Long - Necked |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | MS2XL |
| End Shape | Center Cutting |
$ 52.57
MS2XLD0050N060 CARBIDE ENDMILL
Item #: MB03288809
Brand: Mitsubishi Materials USA
Model #: 288809
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.5 mm |
| Usable Length (LU) | 6 mm |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| Neck Diameter (DN) | 0.46 mm |
| Depth of Cut Maximum (APMX) | 0.7 mm |
| Body Half Taper Angle (BHTA) | 12 Degrees |
| Overall Length (OAL) | 45 mm |
| Peripheral Effective Cutting Edge Count (ZEFP) | 2 |
| Coating | MS |
| Length Group | Long - Necked |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | MS2XL |
| End Shape | Center Cutting |
$ 52.57
1/8″ Dia. × 1/8″ Shank × 3/4″ DOC × 2-1/4″ OAL, Carbide TiCN, Spiral , 2 Flute, CW Helix, Round, Ballnose End Mill
Item #: BA10B01360
Brand: Bassett
Model #: B01360
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Length Group | Long |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| End Shape | Ball Nose |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 2-1/4″ |
| Decimal Equivalent | 0.125″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TiCN |
| Series/List # | MSE-2B-TC |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | CW |
| Center Cutting | Yes |
| Shank Type | Round |
| Single / Double End | Single End |
| Tool Type | End Mill |
$ 46.78
MP2SBR0250
Item #: MB0310482339
Brand: Mitsubishi Materials USA
Model #: 10482339
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5 mm |
| Corner Radius (RE) | 2.5 mm |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Body Half Taper Angle (BHTA) | 15 Degrees |
| Depth of Cut Maximum (APMX) | 7.5 mm |
| Length Group | Short |
| Overall Length (OAL) | 80 mm |
| End Shape | Ball Nose |
| Coating | MS+ |
| Measurement Type | Metric |
| Flute Count (NOF) | 2 |
| Series/List # | MP2SB |
| Flute Helix Angle (FHA) | 30 Degrees |
$ 52.33
MP2XLBR0150N120
Item #: MB03831470
Brand: Mitsubishi Materials USA
Model #: 831470
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3 mm |
| Corner Radius (RE) | 1.5 mm |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Neck Diameter (DN) | 2.9 mm |
| Depth of Cut Maximum (APMX) | 2.3 mm |
| Body Half Taper Angle (BHTA) | 12 Degrees |
| Overall Length (OAL) | 60 mm |
| Length Group | Long - Necked |
| Coating | MS+ |
| End Shape | Ball Nose |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | MP2XLB |
| Usable Length (LU) | 12 mm |
$ 52.21
15313 3/16X3/16X1/4X3 2FL
Item #: CR1015313
Brand: Melin Tool Co
Model #: 15313
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Usable Length (LU) | 1/4″ |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Corner Radius (RE) | 0.005″ |
| Depth of Cut Maximum (APMX) | 1-1/8″ |
| Tool Type | High Performance |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.1875″ |
| Cutting Edge Material | Carbide |
| Series/List # | AXMG45 |
| Flute Count (NOF) | 2 |
$ 47.61
H0545 0.070X1/8X0.500
Item #: CR10H0545
Brand: Melin Tool Co
Model #: H0545
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.07″ |
| Usable Length (LU) | 1/2″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| End Shape | Ball |
| Overall Length (OAL) | 2-1/2 |
| Style | Micro End Mills |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.07″ |
| Coating | DLC |
| Series/List # | EMG-MICRO |
| Flute Count (NOF) | 3 |
$ 47.54
RHB-.2501.00.100Z4125C3
Item #: IC079589361
Brand: Ingersoll
Model #: 9589361
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Usable Length (LU) | 1″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Application | | Helical Interpolation | Rampdown | Shouldering | Slotting | |
| Depth of Cut Maximum (APMX) | 1″ |
| Corner Radius (RE) | 1/8″ |
| Overall Length (OAL) | 3″ |
| Body Material | Steel |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.25″ |
| Flute Helix Angle (FHA) | 38 Degrees |
| Measurement Type | Inch |
$ 48.54
End Mills for Plastics - 2 Flute - 0.0312″ (1/32″) Cutter Diameter × 0.0470″ (3/64″) Length of Cut Carbide Square Downcut End Mill for Plastic, 2 Flutes
Item #: GE90966231
Brand: Harvey Tool
Model #: 966231
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/32″ |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 3/64″ |
| Applicable Material | Other Non-Metallic Materials |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | 1.5D |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.03125″ |
| Coating | Uncoated |
| Measurement Type | Inch |
$ 49.66
End Mills for Plastics - Single Flute - 0.0937″ (3/32″) Cutter Diameter × 0.5000″ (1/2″) Length of Cut Carbide Square Upcut End Mill for Plastic, 1 Flute, Amorphous Diamond Coated
Item #: GE9052493C4
Brand: Harvey Tool
Model #: 52493-C4
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/32″ |
| Flute Count (NOF) | 1 |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Applicable Material | Other Non-Metallic Materials |
| Overall Length (OAL) | 2″ |
| Decimal Equivalent | 0.09375″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Amorphous Diamond |
$ 51.70
0.05″ Dia. × 1/8″ Shank × 0.3″ DOC × 2-1/2″ OAL, Carbide Uncoated, Long , 3 Flute, Ballnose End Mill
Item #: GE9013850
Brand: Harvey Tool
Model #: 13850
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.05″ |
| Usable Length (LU) | 0.6″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Length Group | Long Reach |
| Depth of Cut Maximum (APMX) | 0.3″ |
| End Shape | Ball Nose |
| Overall Length (OAL) | 2-1/2″ |
| Flute Type | Long |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.05″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
$ 49.66
0.07″ Dia. × 1/8″ Shank × 1/2″ DOC × 2-1/2″ OAL, Carbide Uncoated, Long , 3 Flute, Ballnose End Mill
Item #: GE9013870
Brand: Harvey Tool
Model #: 13870
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.07″ |
| Usable Length (LU) | 1″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Length Group | Long Reach |
| Depth of Cut Maximum (APMX) | 1/2″ |
| End Shape | Ball Nose |
| Overall Length (OAL) | 2-1/2″ |
| Flute Type | Long |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.07″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
$ 49.66
7/64″ Dia. × 1/8″ Shank × 0.327″ DOC × 1-1/2″ OAL, Carbide Uncoated, Standard , 2 Flute, Ballnose End Mill
Item #: GE90948602
Brand: Harvey Tool
Model #: 948602
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7/64″ |
| Usable Length (LU) | 0.57″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Length Group | 5D |
| Depth of Cut Maximum (APMX) | 0.327″ |
| End Shape | Ball Nose |
| Overall Length (OAL) | 1-1/2″ |
| Flute Type | Standard |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.109375″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
$ 49.25
Miniature End Mills - Long Reach, Stub Flute - 0.0620″ (1/16″) Cutter Diameter × 0.0100″ Radius × 0.0930″ (3/32″) Length of Cut × 0.6250″ (5/8″) Reach Carbide Corner Radius End Mill, 3 Flutes
Item #: GE90953762
Brand: Harvey Tool
Model #: 953762
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| End Shape | Corner Radius |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 5/8″ |
| Depth of Cut Maximum (APMX) | 3/32″ |
| Corner Radius (RE) | 0.01″ |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | 10D |
| Cutting Edge Material | Carbide |
| Flute Type | Stub |
| Coating | Uncoated |
| Decimal Equivalent | 0.0625″ |
| Flute Count (NOF) | 3 |
| Measurement Type | Inch |
$ 49.66