BES 2023 $10+ Products - (25001 Products)
1.0000″ (1″) Cutter Diameter × 0.1560″ (5/32″) Width Carbide Square Large Diameter Standard Keyseat Cutter, 12 Flutes, AlTiN Coated
Item #: GE9055955C3
Brand: Harvey Tool
Model #: 55955-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Cutting Width (CW) | 5/32″ |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 3-5/32″ |
| Coating | AlTiN |
$ 163.25
1.0000″ (1″) Cutter Diameter × 0.1870″ (3/16″) Width Carbide Square Large Diameter Standard Keyseat Cutter, 12 Flutes, AlTiN Coated
Item #: GE9055960C3
Brand: Harvey Tool
Model #: 55960-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Cutting Width (CW) | 3/16″ |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 3-3/16″ |
| Coating | AlTiN |
$ 163.25
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.2917NC
Item #: 29735800
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.2917NC
Product Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+.00002/-.00000
Blank Number Wire Size
#1
Inner Diameter (Decimal Inch)
0.2917
Calibrated
Yes
Traceability Certification Included
NIST
Go/No Go
No Go
Standards
B47.1 Gage Standards; ASME B89.1.6
$ 368.16
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.2904NC
Item #: 29735206
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.2904NC
Product Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+.00002/-.00000
Blank Number Wire Size
#1
Inner Diameter (Decimal Inch)
0.2904
Calibrated
Yes
Traceability Certification Included
NIST
Go/No Go
No Go
Standards
B47.1 Gage Standards; ASME B89.1.6
$ 368.16
IMX12CH6V0500A45 EP7020 SOLID EM
Item #: MB0310528181
Brand: Mitsubishi Materials USA
Model #: 10528181
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Head Length (LH) | 0.789″ |
| Connection Diameter Machine Side (DCONMS) | 0.488″ |
| Peripheral Effective Cutting Edge Count (ZEFP) | 6 |
| Depth of Cut Maximum (APMX) | 0.19″ |
| Decimal Equivalent | 0.5″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| End Shape | Chamfer |
| Series/List # | iMX_CH6V_INCH |
| Applicable Material | Steel | Stainless Steel | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials |
| Tool Cutting Edge Angle (KAPR) | 45 Degrees |
| Grade | EP7020 |
$ 170.84
13/16″ × 5/8″ × 1-1/2″ × 4″ RHS / RHC HSS HSS Single End 2-Flute Center Cutting Keyway Tolerance Finishing End Mill - TiN
Item #: CE60C38949
Brand: Cleveland Twist Drill
Model #: C38949
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 13/16″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 4″ |
| Style | Keyway |
| Cutting Edge Material | HSS |
| Decimal Equivalent | 0.8125″ |
| Coating | TiN |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Series/List # | HG-2K-TN |
| Shank Type | Weldon |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Square |
| Single / Double End | Single End |
$ 146.56
5/8″ × 5/8″ × 1-5/8″ × 3-3/4″ RHS / RHC HSS-E (PM) Powder Metal High Helix Finishing End Mill-3F SE CC - TiCN
Item #: CE60C40083
Brand: Cleveland Twist Drill
Model #: C40083
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 3-3/4″ |
| Decimal Equivalent | 0.625″ |
| Cutting Edge Material | HSSPM |
| Measurement Type | Inch |
| Coating | TiCN |
| Series/List # | PM-539R-TC |
| Flute Count (NOF) | 3 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Weldon |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Trade Name | PM-Plus |
$ 152.96
3/4″ × 3/4″ × 1-5/8″ × 3-7/8″ RHS / RHC HSS-E (PM) Powder Metal Finishing End Mill-4F SE CC - Bright
Item #: CE60C42516
Brand: Cleveland Twist Drill
Model #: C42516
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 3-7/8″ |
| Decimal Equivalent | 0.75″ |
| Cutting Edge Material | HSSPM |
| Measurement Type | Inch |
| Coating | Bright |
| Series/List # | PM-4 |
| Flute Count (NOF) | 6 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Weldon |
| Single / Double End | Single End |
| End Shape | Square |
| Trade Name | PM-Plus |
$ 146.66
VFMDRBD0800R030 HP END MILL
Item #: MB03905766
Brand: Mitsubishi Materials USA
Model #: 905766
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 8 mm |
| End Shape | Corner Radius |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Corner Radius (RE) | 0.3 mm |
| Depth of Cut Maximum (APMX) | 20 mm |
| Peripheral Effective Cutting Edge Count (ZEFP) | 6 |
| Overall Length (OAL) | 75 mm |
| Length Group | Medium |
| Coating | VF |
| Measurement Type | Metric |
| Flute Count (NOF) | 6 |
| Series/List # | VFMDRB |
| Flute Helix Angle (FHA) | 45 Degrees |
$ 170.97
VFMDRBD0800R100 HP END MILL
Item #: MB03905774
Brand: Mitsubishi Materials USA
Model #: 905774
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 8 mm |
| End Shape | Corner Radius |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Corner Radius (RE) | 1 mm |
| Depth of Cut Maximum (APMX) | 20 mm |
| Peripheral Effective Cutting Edge Count (ZEFP) | 6 |
| Overall Length (OAL) | 75 mm |
| Length Group | Medium |
| Coating | VF |
| Measurement Type | Metric |
| Flute Count (NOF) | 6 |
| Series/List # | VFMDRB |
| Flute Helix Angle (FHA) | 45 Degrees |
$ 170.97
9/16″ × 9/16″ × 1-1/4″ × 3-1/2″ RHS / RHC Solid Carbide 2-Flute Square End Single End General Purpose End Mill - Bright
Item #: BA10B52047
Brand: Bassett
Model #: B52047
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 9/16″ |
| Tool Type | End Mill |
| Connection Diameter Machine Side (DCONMS) | 9/16″ |
| Length Group | Regular |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 3-1/2″ |
| Decimal Equivalent | 0.5625″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Bright |
| Series/List # | MSE-2 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | CW |
| Single / Double End | Single End |
| Shank Type | Round |
| Center Cutting | Yes |
| End Shape | Corner Radius |
$ 152.17
13082 1/2X3/4X3-3/4
Item #: CR1013082
Brand: Melin Tool Co
Model #: 13082
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7/16″ |
| Usable Length (LU) | 1-3/8″ |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Corner Radius (RE) | 7/16″ |
| Overall Length (OAL) | 3-3/4″ |
| Tool Type | Single End |
| Cutting Edge Material | HSS |
| Series/List # | RC |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.4375″ |
$ 162.32
RE1-.500.8752.12Z6060W4
Item #: IC079591832
Brand: Ingersoll
Model #: 9591832
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Application | Helical Interpolation | Rampdown | Shouldering |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Ramping Angle Maximum (RMPX) | 1.5 Degrees |
| Depth of Cut Maximum (APMX) | 7/8″ |
| Body Material | Steel |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.5″ |
| Flute Count (NOF) | 6 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 38 Degrees |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.06″ |
| End Shape | Square |
| Tool Cutting Edge Angle (KAPR) | 90 Degrees |
| Usable Length (LU) | 2-1/8″ |
$ 158.05
3/8″ Dia. × 1/2″ Shank × 0.563″ DOC × 4″ OAL, Carbide Uncoated, 2 Flute, Ballnose End Mill
Item #: GE9018924
Brand: Harvey Tool
Model #: 18924
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Usable Length (LU) | 2″ |
| Depth of Cut Maximum (APMX) | 0.563″ |
| Neck Length (LN) | 9/16″ |
| Overall Length (OAL) | 4″ |
| End Shape | Ball Nose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.375″ |
| Coating | Uncoated |
| Measurement Type | Inch |
$ 164.48
RH1-.750.875.875Z4000W3
Item #: IC079591102
Brand: Ingersoll
Model #: 9591102
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Application | Helical Interpolation | Rampdown | Shouldering | Slotting |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Ramping Angle Maximum (RMPX) | 3 Degrees |
| Depth of Cut Maximum (APMX) | 7/8″ |
| Body Material | Steel |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.75″ |
| Flute Helix Angle (FHA) | 38 Degrees |
| Measurement Type | Inch |
| End Shape | Square |
| Tool Cutting Edge Angle (KAPR) | 90 Degrees |
| Usable Length (LU) | 7/8″ |
$ 158.05
RE1-.500.8752.12Z6015W4
Item #: IC079591744
Brand: Ingersoll
Model #: 9591744
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Application | Helical Interpolation | Rampdown | Shouldering |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Ramping Angle Maximum (RMPX) | 1.5 Degrees |
| Depth of Cut Maximum (APMX) | 7/8″ |
| Body Material | Steel |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.5″ |
| Flute Count (NOF) | 6 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 38 Degrees |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.015″ |
| End Shape | Square |
| Tool Cutting Edge Angle (KAPR) | 90 Degrees |
| Usable Length (LU) | 2-1/8″ |
$ 158.05
RE1-.500.8752.12Z6090W4
Item #: IC079591869
Brand: Ingersoll
Model #: 9591869
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Application | Helical Interpolation | Rampdown | Shouldering |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Ramping Angle Maximum (RMPX) | 1.5 Degrees |
| Depth of Cut Maximum (APMX) | 7/8″ |
| Body Material | Steel |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.5″ |
| Flute Count (NOF) | 6 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 38 Degrees |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.09″ |
| End Shape | Square |
| Tool Cutting Edge Angle (KAPR) | 90 Degrees |
| Usable Length (LU) | 2-1/8″ |
$ 158.05
RE1-.500.8752.12Z6125W4
Item #: IC079591906
Brand: Ingersoll
Model #: 9591906
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Application | Helical Interpolation | Rampdown | Shouldering |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Ramping Angle Maximum (RMPX) | 1.5 Degrees |
| Depth of Cut Maximum (APMX) | 7/8″ |
| Body Material | Steel |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.5″ |
| Flute Count (NOF) | 6 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 38 Degrees |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.125″ |
| End Shape | Square |
| Tool Cutting Edge Angle (KAPR) | 90 Degrees |
| Usable Length (LU) | 2-1/8″ |
$ 158.05
RE1-.5002.502.50Z7000W5
Item #: IC079592095
Brand: Ingersoll
Model #: 9592095
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Usable Length (LU) | 2-1/2″ |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Application | Helical Interpolation | Rampdown | Shouldering |
| Depth of Cut Maximum (APMX) | 2-1/2″ |
| Ramping Angle Maximum (RMPX) | 1.5 Degrees |
| Overall Length (OAL) | 5″ |
| Body Material | Steel |
| Flute Count (NOF) | 7 |
| Decimal Equivalent | 0.5″ |
| Flute Helix Angle (FHA) | 40 Degrees |
| Measurement Type | Inch |
| End Shape | Square |
| Tool Cutting Edge Angle (KAPR) | 90 Degrees |
$ 158.05
REB-.5002.502.50Z6250C5
Item #: IC079590028
Brand: Ingersoll
Model #: 9590028
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Usable Length (LU) | 2-1/2″ |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Application | | Helical Interpolation | Rampdown | Shouldering | |
| Depth of Cut Maximum (APMX) | 2-1/2″ |
| Corner Radius (RE) | 1/4″ |
| Overall Length (OAL) | 5″ |
| Body Material | Steel |
| Flute Count (NOF) | 6 |
| Decimal Equivalent | 0.5″ |
| Flute Helix Angle (FHA) | 38 Degrees |
| Measurement Type | Inch |
$ 158.05