4" Wide, 12" Long

Item #: 32957920
Brand: Value Collection
Model #: DA.625X02.25X12

Product Specifications

Thickness (Inch) 5/8

Material 4140 Steel

Width (Inch) 2-1/4

Thickness Tolerance +.015"/+.035"

Length (Inch) 12

Hardness 260-321 Brinell

Material Specification 4140PH

Application Shafts; Arbors; Gears; Fixture Bases; Inexpensive Tooling; Short Run Stamping Dies; Rods; Studs; Spindles; Axles; Machine Parts

Finish Coating DCF

Length Ft. 1.000

UNSPSC Code 30263600

$ 74.52

Corner Chamfer End Mill: 4.00 mm Dia, 10.50 mm LOC, 3 Flute, 0.10 mm Chamfer Width, Solid Carbide

Item #: 05874219
Brand: WNT
Model #: 5361104200

Product Specifications

Mill Diameter (mm) 4.00

Number Of Flutes 3

Length of Cut (mm) 10.50

Single Or Double End Single

End Mill Material Solid Carbide

Coating/Finish Bright/Uncoated

Centercutting No

Flute Direction Right Hand

Variable Index No

Variable Helix Yes

Cutting Direction Right Hand

Chamfer Width (mm) 0.10

Overall Length (mm) 62.00

Coolant Through No

Chipbreaker No

Chamfer Angle 45.000

Length Type Long

Flute Type Variable

Extended Reach No

Shank Type Straight-Cylindrical

Shank Diameter (mm) 6.00

Neck Diameter (mm) 3.800

UNSPSC Code 23241614

Series 53611

$ 32.77

Micro Drill Bit: 2.50 mm Dia, (0.0984"), 139 deg, Solid Carbide

Item #: 67189175
Brand: Kennametal
Model #: 7071080

Product Specifications

Drill Bit Size (mm) 2.50

Drill Bit Size (Decimal Inch) 0.0984

Tool Material Solid Carbide

Flute Length (mm) 133.00

Coating/Finish TiAlCrN; TiSiN; TiAlCrSiN

Coolant Through Yes

Drill Point Angle 139

Cutting Direction Right Hand

Maximum Drilling Depth (mm) 60.40

Number Of Flutes 2

Series Kendrill

Overall Length (mm) 176.00

Flute Type Spiral

Shank Type Straight-Cylindrical

Shank Diameter (mm) 4.00

Shank Length (mm) 40.00

Flute By Diameter Ratio 2xD

UNSPSC Code 23241600

Drill Bit Size (mm) 2.50

Drill Bit Size (Decimal Inch) 0.0984

Tool Material Solid Carbide

Flute Length (mm) 133.00

Coating/Finish TiAlCrN; TiSiN; TiAlCrSiN

Coolant Through Yes

Drill Point Angle 139

Cutting Direction Right Hand

Maximum Drilling Depth (mm) 60.40

Number Of Flutes 2

Series Kendrill

Overall Length (mm) 176.00

Flute Type Spiral

Shank Type Straight-Cylindrical

Shank Diameter (mm) 4.00

Shank Length (mm) 40.00

Flute By Diameter Ratio 2xD

UNSPSC Code 23241600

MSC Part # 67189175

Mfr Part # 7071080

Country of Origin Country of Origin is subject to change Japan

$ 483.77

WALTER Surface Technologies - 5" 60 Grit Aluminum Oxide Cutoff Wheel - 3/64" Thick, 7/8" Arbor, 12,200 Max RPM, Use with Angle Grinders

Item #: 77331163
Brand: WALTER Surface Technologies
Model #: 11U052
Exact Tooling IR#: 04

Features and Benefits

Aluminum oxide is the most commonly used abrasive. Best-suited for general purpose deburring and blending, it is tough, economical and fracture-resistant. Commonly used on ferrous alloys, high-tensile materials, and wood.

Product Specifications
Tool Compatibility	Angle Grinders
Wheel Diameter (Inch)	5
Hole Size (Inch)	7/8
Wheel Thickness (Inch)	3/64
Abrasive Material	Aluminum Oxide
Maximum RPM	12200
Grade	Medium
Grit	60

Product Specifications

Tool Compatibility Angle Grinders

Wheel Diameter (Inch) 5

Hole Size (Inch) 7/8

Wheel Thickness (Inch) 3/64

Abrasive Material Aluminum Oxide

Maximum RPM 12200

Grade Medium

Grit 60

$ 7.67

Turning Insert: CCMT21.51CM T515, Carbide

Item #: 20848511
Brand: Tungaloy
Model #: 6747826

Product Specifications

ANSI Insert Code CCMT21.51

ISO Insert Code CCMT060204

Relief Angle 7

Insert Style CCMT

Corner Radius (Inch) 1/64

Corner Radius (Decimal Inch) 0.0157

Included Angle 80

Manufacturer Grade T515

Coating/Finish TiCN; Al2O3

Wiper Edge No

Insert Hand Neutral

Insert Thickness (Inch) 3/32

Insert Thickness (Decimal Inch) 0.0938

Series CCMT-CM

Inscribed Circle (Decimal Inch) 0.2500

Inscribed Circle (Inch) 1/4

Insert Material Carbide

Insert Shape C - Diamond (Rhombic) 80-Deg

Chip Breaker Operation Finishing

Grade Characteristics Cast Iron (K) - High Wear-Resistance to Moderate Wear-Resistance and Toughness

Side Clearance Positive

Number Of Cutting Edges 2

Insert Shape Code C

Hole Diameter (Decimal Inch) 0.1100

Maximum Depth of Cut (Decimal Inch) 0.0787

Insert Holding Method Screw

Width (Inch) 1/4

Clearance Code C

Tolerance Code M

Coating Process CVD

Length Range (Decimal Inch) 0.0000 - 0.3000

Rake Positive

Insert Length (Decimal Inch) 0.2560

Primary Workpiece Material Cast Iron

Primary Workpiece Material Code K

Iso Code CCMT060204-CM T515

Standards ISO; ANSI

Manufacturers Catalog Number 6747826

Material Grade K20; K10

Proprietary Coating Designation Multilayer Coating

Coating Classification CVD

Chip Breaker CM

Rake Angle 10

Cutting Edge Style Honed; Chamfered

Industry Standard Number CCMT 21.51 CM

Width (Decimal Inch - 4 Decimals) 0.2500

Multi-Use Tool Yes

Full Radius No

Multi-Use Application Facing; Turning; Boring

ANSI Size Code 21.51

ISO Size Code 060204

UNSPSC Code 23242105

Insert Size Code 21.51

$ 12.23

12" Dia, 60 Grit, Zirconia Alumina

Item #: 51468239
Brand: ARC Abrasives
Model #: 30513-01

Product Specifications

Disc Diameter 12

Grit 60

Abrasive Material Zirconia Alumina

Backing Material Cloth

Product Type Disc

Vacuum Holes Included No

Number Of Vacuum Holes 0

Grade Coarse

Maximum Rpm 8000.000

Backing Weight X

Number Of Discs 25

Disc Color Green

Material Application Exotic Alloys; Non-Ferrous; Aluminum; Stainless Steel; Mild Steel

Machine Compatibility Orbital Sanders; Right Angle Die Grinders; Stationary Grinder

Flexible No

UNSPSC Code 31191506

$ 9.27

Norton - 16" 24 Grit Aluminum Oxide Cutoff Wheel - 5/32" Thick, 1" Arbor, 3,820 Max RPM, Use with Chop Saws

Item #: 41694639
Brand: Norton
Model #: 66243485919
Exact Tooling IR#: 04

Features and Benefits

Aluminum oxide is the most commonly used abrasive. Best-suited for general purpose deburring and blending, it is tough, economical and fracture-resistant. Commonly used on ferrous alloys, high-tensile materials, and wood.

Product Specifications
Tool Compatibility	Chop Saws
Wheel Diameter (Inch)	16
Hole Size (Inch)	1
Wheel Thickness (Inch)	5/32
Abrasive Material	Aluminum Oxide
Maximum RPM	3820
Grade	Extra Coarse
Grit	24
Reinforced	Reinforced
Bond Type	Resinoid
Wheel Hardness	T
Wheel Color	Black
Wheel Type Number	Type 01/41
Type	16" Cutting Wheel

Product Specifications

Tool Compatibility Chop Saws

Wheel Diameter (Inch) 16

Hole Size (Inch) 1

Wheel Thickness (Inch) 5/32

Abrasive Material Aluminum Oxide

Maximum RPM 3820

Grade Extra Coarse

Grit 24

Reinforced Reinforced

Bond Type Resinoid

Wheel Hardness T

Wheel Color Black

Wheel Type Number Type 01/41

Type 16" Cutting Wheel

$ 58.00

Hand Rivet Cutters; Rivet Capacity (Inch): 3/32 to 1/4; Material: Steel

Item #: 65300832
Brand: ATI Tools
Model #: ATI501S

Product Specifications

Rivet Capacity (Inch) 3/32 to 1/4

Material Steel

Series ATI501

Rivet Capacity (Inch) 3/32 to 1/4

Material Steel

Series ATI501

MSC Part # 65300832

Mfr Part # ATI501S

$ 590.38

Tru-Maxx - 3" 36 Grit Aluminum Oxide Cutoff Wheel - 1/16" Thick, 1/4" Arbor, Use with Die Grinders

Item #: 35129857
Brand: Tru-Maxx
Exact Tooling IR#: 04

Features and Benefits

Aluminum oxide is the most commonly used abrasive. Best-suited for general purpose deburring and blending, it is tough, economical and fracture-resistant. Commonly used on ferrous alloys, high-tensile materials, and wood.

Product Specifications
Tool Compatibility	Die Grinders
Wheel Diameter (Inch)	3
Hole Size (Inch)	1/4
Hole Size (mm)	6
Wheel Thickness (Decimal Inch)	0.0625
Abrasive Material	Aluminum Oxide
Grade	Coarse
Grit	36
Reinforced	Reinforced
Bond Type	Resinoid
Wheel Hardness Rating	P

Product Specifications

Tool Compatibility Die Grinders

Wheel Diameter (Inch) 3

Hole Size (Inch) 1/4

Hole Size (mm) 6

Wheel Thickness (Decimal Inch) 0.0625

Abrasive Material Aluminum Oxide

Grade Coarse

Grit 36

Reinforced Reinforced

Bond Type Resinoid

Wheel Hardness Rating P

$ 6.28

Deburring Wheel: 4-1/2" Dia, 1/8" Face Width, 7/8" Hole, Aluminum Oxide

Item #: 59628958
Brand: Rex Cut Abrasives
Model #: 245034

Product Specifications

Wheel Diameter (Inch) 4-1/2

Face Width (Inch) 1/8

Center Hole Size (Inch) 7/8

Abrasive Material Aluminum Oxide

Grade Medium

Wheel Type Type 27

Attachment Type Arbor Hole

Maximum Rpm 13300.000

Tooling Compatibility Right Angle Grinders

Density Grade Hard

UNSPSC Code 31191600

Wheel Diameter (Inch) 4-1/2

Face Width (Inch) 1/8

Center Hole Size (Inch) 7/8

Abrasive Material Aluminum Oxide

Grade Medium

Wheel Type Type 27

Attachment Type Arbor Hole

Maximum Rpm 13300.000

Tooling Compatibility Right Angle Grinders

Density Grade Hard

UNSPSC Code 31191600

MSC Part # 59628958

Mfr Part # 245034

Country of Origin Country of Origin is subject to change UNITED STATES

$ 23.95

Endless, Type 5 Web Sling: 14' Long, 2" Wide, 6400 lb Vertical Capacity, Nylon

Item #: 41185737
Brand: Liftex
Model #: EN192X14ND

Product Specifications

Sling Type Endless, Type 5

Sling Material Nylon

Sling Length (Feet) 14

Sling Width (Inch) 2

Number of Legs 1

Leg Length (Inch) 14

Vertical Capacity (Lb.) 6400

Choker Capacity (Lbs) 5000

Basket Capacity (Lbs) 12800

Number Of Plies 1

Color Yellow

$ 42.22

Sait - 3" 24 Grit Aluminum Oxide Cutoff Wheel - 1/8" Thick, 3/8" Arbor, 20,372 Max RPM, Use with Die Grinders

Item #: 40641318
Brand: Sait
Model #: 23060
Exact Tooling IR#: 04

Features and Benefits

Aluminum oxide is the most commonly used abrasive. Best-suited for general purpose deburring and blending, it is tough, economical and fracture-resistant. Commonly used on ferrous alloys, high-tensile materials, and wood.

Product Specifications
Tool Compatibility	Die Grinders
Wheel Diameter (Inch)	3
Hole Size (Inch)	3/8
Wheel Thickness (Inch)	1/8
Abrasive Material	Aluminum Oxide
Maximum RPM	20372
Grade	Very Coarse
Grit	24
Reinforced	Reinforced
Bond Type	Resinoid
Wheel Hardness	R
Wheel Hardness Rating	Hard

Product Specifications

Tool Compatibility Die Grinders

Wheel Diameter (Inch) 3

Hole Size (Inch) 3/8

Wheel Thickness (Inch) 1/8

Abrasive Material Aluminum Oxide

Maximum RPM 20372

Grade Very Coarse

Grit 24

Reinforced Reinforced

Bond Type Resinoid

Wheel Hardness R

Wheel Hardness Rating Hard

$ 6.04

Norton - 16" Ceramic Cutoff Wheel - 5/32" Thick, 1" Arbor

Item #: 69424273
Brand: Norton
Model #: 61463619480
Exact Tooling IR#: 04

Features and Benefits

Cooler cutting and more durable than natural aluminum-based products, ceramic provides a sharp, high purity grain. Commonly used for precision grinding of steels, hard alloys and exotic materials.

Product Specifications
Wheel Diameter (Inch)	16
Hole Size (Inch)	1
Wheel Thickness (Inch)	5/32
Abrasive Material	Ceramic
Reinforced	Reinforced

Product Specifications

Wheel Diameter (Inch) 16

Hole Size (Inch) 1

Wheel Thickness (Inch) 5/32

Abrasive Material Ceramic

Reinforced Reinforced

$ 344.64

Norton - 13-3/4" Aluminum Oxide Cutoff Wheel - 0.098" Thick, 1-1/4" Arbor, 2,770 Max RPM, Use with Stationary Tools

Item #: 42064550
Brand: Norton
Model #: 66253322156
Exact Tooling IR#: 04

Features and Benefits

Aluminum oxide is the most commonly used abrasive. Best-suited for general purpose deburring and blending, it is tough, economical and fracture-resistant. Commonly used on ferrous alloys, high-tensile materials, and wood.

Product Specifications
Tool Compatibility	Stationary Tools
Wheel Diameter (Inch)	13-3/4
Hole Size (Inch)	1-1/4
Wheel Thickness (Decimal Inch)	0.0980
Abrasive Material	Aluminum Oxide
Maximum RPM	2770
Reinforced	Nonreinforced
Bond Type	Resinoid
Application	Hard Steels

Product Specifications

Tool Compatibility Stationary Tools

Wheel Diameter (Inch) 13-3/4

Hole Size (Inch) 1-1/4

Wheel Thickness (Decimal Inch) 0.0980

Abrasive Material Aluminum Oxide

Maximum RPM 2770

Reinforced Nonreinforced

Bond Type Resinoid

Application Hard Steels

$ 60.12

Grooving Tool: Interior, Left Hand

Item #: 37030020
Brand: Internal Tool
Model #: 123-1015

Product Specifications

Grooving Tool Type Retaining Ring

Cutting Direction Left Hand

Minimum Hole Diameter (Decimal Inch) 0.2500

Groove Width (Decimal Inch) 0.0640

Shank Diameter (Inch) 1/4

Overall Length (Decimal Inch) 2.0000

Full Radius Yes

Maximum Hole Depth (Decimal Inch) 0.2500

Projection (Decimal Inch) 0.2500

Material Solid Carbide

Interior/Exterior Interior

Undercut Yes

Maximum Hole Depth (Inch) 1/4

Shank Length (Decimal Inch) 2.2500

Overall Length (Inch) 2-1/2

Tool Bit Adjusting Screw No

Manufacturer's Part Number 123-1015

UNSPSC Code 23241600

$ 37.97

Smoke & Carbon Monoxide (CO) Alarms; Alarm Type: Smoke; Sensor Type: Ionization; Mount Type: Wall, Ceiling; Interconnectable: Interconnectable; Power Source: Wire-In with Battery Backup; Battery Chemistry: Carbon Zinc; Battery Size: 9V; Batteries Included

Item #: 42002873
Brand: First Alert
Model #: 1046844

Product Specifications

Alarm Type Smoke

Sensor Type Ionization

Mount Type Wall; Ceiling

Interconnectable Interconnectable

Power Source Wire-In with Battery Backup

Battery Chemistry Carbon Zinc

Battery Size 9V

Batteries Included Yes

Maximum Interconnected Units 12

Overall Diameter 11.650

Maximum Decibel Rating 85.0 dB

Overall Length 11.65 in

Current Type AC; DC

Overall Width 12 in

Warranty Length 10

Maximum Operating Temperature 100 F

Features Interconnect Hardwire Smoke Alarm with Battery Backup. Direct wire-in with 9V battery backup. Hardwired with battery backup for protection during power outages. Perfect mount for easy installation. Mounting bracket keeps the alarm secure over a wide rotation range for ideal alignment. Latching alarm indicator, visually identifies unit that initiated alarm or low battery. Interconnects with most First Alert and BRK hardwired alarms. When one alarm sounds, all compatible alarms sound (up to 12 smoke alarms and 6 other alarms). Test/Silence Button, temporarily silence or test the alarm with one-touch easy access button. Dust cover, keeps the alarm clean during construction.

Standards UL 217

Number Of Batteries 1

UNSPSC Code 46191501

$ 22.97

Camel Grinding Wheels - 20" 24 Grit Aluminum Oxide Cutoff Wheel - 3/16" Thick, 1" Arbor, 3,100 Max RPM

Item #: 63870273
Brand: Camel Grinding Wheels
Model #: 70109
Exact Tooling IR#: 04

Features and Benefits

Aluminum oxide is the most commonly used abrasive. Best-suited for general purpose deburring and blending, it is tough, economical and fracture-resistant. Commonly used on ferrous alloys, high-tensile materials, and wood.

Product Specifications
Wheel Diameter (Inch)	20
Hole Size (Inch)	1
Wheel Thickness (Inch)	3/16
Abrasive Material	Aluminum Oxide
Maximum RPM	3100
Grade	Coarse
Grit	24
Reinforced	Nonreinforced
Bond Type	Resinoid
Wheel Hardness	R
Wheel Color	Black
Wheel Type Number	Type 1

Product Specifications

Wheel Diameter (Inch) 20

Hole Size (Inch) 1

Wheel Thickness (Inch) 3/16

Abrasive Material Aluminum Oxide

Maximum RPM 3100

Grade Coarse

Grit 24

Reinforced Nonreinforced

Bond Type Resinoid

Wheel Hardness R

Wheel Color Black

Wheel Type Number Type 1

$ 45.04

Everett - 22" Aluminum Oxide Cutoff Wheel - 3/16" Thick, 1" Arbor, Use with Gas Powered Saws

Item #: 09936618
Brand: Everett
Model #: 2069FG 22 DRY
Exact Tooling IR#: 04

Features and Benefits

Aluminum oxide is the most commonly used abrasive. Best-suited for general purpose deburring and blending, it is tough, economical and fracture-resistant. Commonly used on ferrous alloys, high-tensile materials, and wood.

Product Specifications
Tool Compatibility	Gas Powered Saws
Wheel Diameter (Inch)	22
Hole Size (Inch)	1
Wheel Thickness (Inch)	3/16
Abrasive Material	Aluminum Oxide
Reinforced	Reinforced
Bond Type	Resinoid

Product Specifications

Tool Compatibility Gas Powered Saws

Wheel Diameter (Inch) 22

Hole Size (Inch) 1

Wheel Thickness (Inch) 3/16

Abrasive Material Aluminum Oxide

Reinforced Reinforced

Bond Type Resinoid

$ 94.53

Tru-Maxx - 12" 46 Grit Aluminum Oxide Cutoff Wheel - 3/32" Thick, 1" Arbor, 3,024 Max RPM, Use with Stationary Tools

Item #: 71178685
Brand: Tru-Maxx
Exact Tooling IR#: 04

Features and Benefits

Aluminum oxide is the most commonly used abrasive. Best-suited for general purpose deburring and blending, it is tough, economical and fracture-resistant. Commonly used on ferrous alloys, high-tensile materials, and wood.

Product Specifications
Tool Compatibility	Stationary Tools
Wheel Diameter (Inch)	12
Hole Size (Inch)	1
Wheel Thickness (Inch)	3/32
Abrasive Material	Aluminum Oxide
Maximum RPM	3024
Grade	Coarse
Grit	46
Reinforced	Nonreinforced
Wheel Hardness	Q
Specifications	A46-Q
Wheel Hardness Rating	Medium

Product Specifications

Tool Compatibility Stationary Tools

Wheel Diameter (Inch) 12

Hole Size (Inch) 1

Wheel Thickness (Inch) 3/32

Abrasive Material Aluminum Oxide

Maximum RPM 3024

Grade Coarse

Grit 46

Reinforced Nonreinforced

Wheel Hardness Q

Specifications A46-Q

Wheel Hardness Rating Medium

$ 34.82

Pleated & Panel Air Filters; GE432 MAXLULTR THERMALLY PROTECTED

Item #: 32162828
Brand: Made in USA
Model #: 78625

Product Specifications

UNSPSC Code 40161505

$ 55.72

Thickness (Inch)	5/8
Material	4140 Steel
Width (Inch)	2-1/4
Thickness Tolerance	+.015"/+.035"
Length (Inch)	12
Hardness	260-321 Brinell
Material Specification	4140PH
Application	Shafts; Arbors; Gears; Fixture Bases; Inexpensive Tooling; Short Run Stamping Dies; Rods; Studs; Spindles; Axles; Machine Parts
Finish Coating	DCF
Length Ft.	1.000
UNSPSC Code	30263600

Mill Diameter (mm)	4.00
Number Of Flutes	3
Length of Cut (mm)	10.50
Single Or Double End	Single
End Mill Material	Solid Carbide
Coating/Finish	Bright/Uncoated
Centercutting	No
Flute Direction	Right Hand
Variable Index	No
Variable Helix	Yes
Cutting Direction	Right Hand
Chamfer Width (mm)	0.10
Overall Length (mm)	62.00
Coolant Through	No
Chipbreaker	No
Chamfer Angle	45.000
Length Type	Long
Flute Type	Variable
Extended Reach	No
Shank Type	Straight-Cylindrical
Shank Diameter (mm)	6.00
Neck Diameter (mm)	3.800
UNSPSC Code	23241614
Series	53611

Drill Bit Size (mm)	2.50
Drill Bit Size (Decimal Inch)	0.0984
Tool Material	Solid Carbide
Flute Length (mm)	133.00
Coating/Finish	TiAlCrN; TiSiN; TiAlCrSiN
Coolant Through	Yes
Drill Point Angle	139
Cutting Direction	Right Hand
Maximum Drilling Depth (mm)	60.40
Number Of Flutes	2
Series	Kendrill
Overall Length (mm)	176.00
Flute Type	Spiral
Shank Type	Straight-Cylindrical
Shank Diameter (mm)	4.00
Shank Length (mm)	40.00
Flute By Diameter Ratio	2xD
UNSPSC Code	23241600
Drill Bit Size (mm)	2.50
Drill Bit Size (Decimal Inch)	0.0984
Tool Material	Solid Carbide
Flute Length (mm)	133.00
Coating/Finish	TiAlCrN; TiSiN; TiAlCrSiN
Coolant Through	Yes
Drill Point Angle	139
Cutting Direction	Right Hand
Maximum Drilling Depth (mm)	60.40
Number Of Flutes	2
Series	Kendrill
Overall Length (mm)	176.00
Flute Type	Spiral
Shank Type	Straight-Cylindrical
Shank Diameter (mm)	4.00
Shank Length (mm)	40.00
Flute By Diameter Ratio	2xD
UNSPSC Code	23241600
MSC Part #	67189175
Mfr Part #	7071080
Country of Origin Country of Origin is subject to change	Japan

ANSI Insert Code	CCMT21.51
ISO Insert Code	CCMT060204
Relief Angle	7
Insert Style	CCMT
Corner Radius (Inch)	1/64
Corner Radius (Decimal Inch)	0.0157
Included Angle	80
Manufacturer Grade	T515
Coating/Finish	TiCN; Al2O3
Wiper Edge	No
Insert Hand	Neutral
Insert Thickness (Inch)	3/32
Insert Thickness (Decimal Inch)	0.0938
Series	CCMT-CM
Inscribed Circle (Decimal Inch)	0.2500
Inscribed Circle (Inch)	1/4
Insert Material	Carbide
Insert Shape	C - Diamond (Rhombic) 80-Deg
Chip Breaker Operation	Finishing
Grade Characteristics	Cast Iron (K) - High Wear-Resistance to Moderate Wear-Resistance and Toughness
Side Clearance	Positive
Number Of Cutting Edges	2
Insert Shape Code	C
Hole Diameter (Decimal Inch)	0.1100
Maximum Depth of Cut (Decimal Inch)	0.0787
Insert Holding Method	Screw
Width (Inch)	1/4
Clearance Code	C
Tolerance Code	M
Coating Process	CVD
Length Range (Decimal Inch)	0.0000 - 0.3000
Rake	Positive
Insert Length (Decimal Inch)	0.2560
Primary Workpiece Material	Cast Iron
Primary Workpiece Material Code	K
Iso Code	CCMT060204-CM T515
Standards	ISO; ANSI
Manufacturers Catalog Number	6747826
Material Grade	K20; K10
Proprietary Coating Designation	Multilayer Coating
Coating Classification	CVD
Chip Breaker	CM
Rake Angle	10
Cutting Edge Style	Honed; Chamfered
Industry Standard Number	CCMT 21.51 CM
Width (Decimal Inch - 4 Decimals)	0.2500
Multi-Use Tool	Yes
Full Radius	No
Multi-Use Application	Facing; Turning; Boring
ANSI Size Code	21.51
ISO Size Code	060204
UNSPSC Code	23242105
Insert Size Code	21.51

Disc Diameter	12
Grit	60
Abrasive Material	Zirconia Alumina
Backing Material	Cloth
Product Type	Disc
Vacuum Holes Included	No
Number Of Vacuum Holes	0
Grade	Coarse
Maximum Rpm	8000.000
Backing Weight	X
Number Of Discs	25
Disc Color	Green
Material Application	Exotic Alloys; Non-Ferrous; Aluminum; Stainless Steel; Mild Steel
Machine Compatibility	Orbital Sanders; Right Angle Die Grinders; Stationary Grinder
Flexible	No
UNSPSC Code	31191506

Rivet Capacity (Inch)	3/32 to 1/4
Material	Steel
Series	ATI501
Rivet Capacity (Inch)	3/32 to 1/4
Material	Steel
Series	ATI501
MSC Part #	65300832
Mfr Part #	ATI501S

Wheel Diameter (Inch)	4-1/2
Face Width (Inch)	1/8
Center Hole Size (Inch)	7/8
Abrasive Material	Aluminum Oxide
Grade	Medium
Wheel Type	Type 27
Attachment Type	Arbor Hole
Maximum Rpm	13300.000
Tooling Compatibility	Right Angle Grinders
Density Grade	Hard
UNSPSC Code	31191600
Wheel Diameter (Inch)	4-1/2
Face Width (Inch)	1/8
Center Hole Size (Inch)	7/8
Abrasive Material	Aluminum Oxide
Grade	Medium
Wheel Type	Type 27
Attachment Type	Arbor Hole
Maximum Rpm	13300.000
Tooling Compatibility	Right Angle Grinders
Density Grade	Hard
UNSPSC Code	31191600
MSC Part #	59628958
Mfr Part #	245034
Country of Origin Country of Origin is subject to change	UNITED STATES

Sling Type	Endless, Type 5
Sling Material	Nylon
Sling Length (Feet)	14
Sling Width (Inch)	2
Number of Legs	1
Leg Length (Inch)	14
Vertical Capacity (Lb.)	6400
Choker Capacity (Lbs)	5000
Basket Capacity (Lbs)	12800
Number Of Plies	1
Color	Yellow

Grooving Tool Type	Retaining Ring
Cutting Direction	Left Hand
Minimum Hole Diameter (Decimal Inch)	0.2500
Groove Width (Decimal Inch)	0.0640
Shank Diameter (Inch)	1/4
Overall Length (Decimal Inch)	2.0000
Full Radius	Yes
Maximum Hole Depth (Decimal Inch)	0.2500
Projection (Decimal Inch)	0.2500
Material	Solid Carbide
Interior/Exterior	Interior
Undercut	Yes
Maximum Hole Depth (Inch)	1/4
Shank Length (Decimal Inch)	2.2500
Overall Length (Inch)	2-1/2
Tool Bit Adjusting Screw	No
Manufacturer's Part Number	123-1015
UNSPSC Code	23241600

Alarm Type	Smoke
Sensor Type	Ionization
Mount Type	Wall; Ceiling
Interconnectable	Interconnectable
Power Source	Wire-In with Battery Backup
Battery Chemistry	Carbon Zinc
Battery Size	9V
Batteries Included	Yes
Maximum Interconnected Units	12
Overall Diameter	11.650
Maximum Decibel Rating	85.0 dB
Overall Length	11.65 in
Current Type	AC; DC
Overall Width	12 in
Warranty Length	10
Maximum Operating Temperature	100 F
Features	Interconnect Hardwire Smoke Alarm with Battery Backup. Direct wire-in with 9V battery backup. Hardwired with battery backup for protection during power outages. Perfect mount for easy installation. Mounting bracket keeps the alarm secure over a wide rotation range for ideal alignment. Latching alarm indicator, visually identifies unit that initiated alarm or low battery. Interconnects with most First Alert and BRK hardwired alarms. When one alarm sounds, all compatible alarms sound (up to 12 smoke alarms and 6 other alarms). Test/Silence Button, temporarily silence or test the alarm with one-touch easy access button. Dust cover, keeps the alarm clean during construction.
Standards	UL 217
Number Of Batteries	1
UNSPSC Code	46191501