Abrasives, Files & Deburring Tools > Coated Abrasives (ET03) - (21776 Products)
Abrasives, Files & Deburring Tools > Coated Abrasives (ET03)
Brand: Rocky Mountain Twist / Part #: 953HS24SS
Item #: 95973319
Brand: Rocky Mountain Twist
Model #: 953HS24SS
Product Specifications
Type
Short
Drill Bit Size (Decimal Inch)
0.1520
Drill Bit Size (Wire)
#24
Drill Point Angle
135
Shank Type
Threaded
Tool Material
High Speed Steel
Point Type
Split
Overall Length (Decimal Inch)
1.2500
Cutting Direction
Right Hand
Flute Type
Spiral
Flute Length (Inch)
9/16
Series
P3
Maximum Drilling Depth (Decimal Inch)
0.5625
Shank Thread Size
1/4-28
Standards
NAS 965 Type B
Coolant Through
No
Flute By Diameter Ratio
4xD
Drill Bit Finish/Coating
Oxide
$ 5.45
Brand: Craftsman / Part #: CMMT15841
Item #: 23169857
Brand: Craftsman
Model #: CMMT15841
Product Specifications
Drive Size
3/8 in
Type
Impact Socket
Style
Impact Socket
Material
Steel
Finish
Black Oxide
Size (Mm - 4 Decimals)
12.00
Number Of Points
6
$ 4.39
25 mm Cutting Dia. × 25 mm Shank Dia. × 27 mm LOC × 182 mm OAL, 2 Flute, Carbide, Uncoated, Corner Radius, AX
Item #: FR1015575770
Brand: Fraisa USA Inc
Model #: 15575770
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 25 mm |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 25 mm |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 27 mm |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Overall Length (OAL) | 182 mm |
| Tool Type | Corner Radius |
| Cutting Edge Material | Carbide |
| Series/List # | AX |
| Coating | Uncoated |
| Corner Radius (RE) / Chamfer Width (CHW) | 1 mm |
$ 715.02
5 mm Cutting Dia. × 6 mm Shank Dia. × 6 mm LOC × 57 mm OAL, 4 Flute, Carbide, Duro-Si, Square Endmill, NX
Item #: FR10H8502260
Brand: Fraisa USA Inc
Model #: H8502260
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5 mm |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 6 mm |
| Applicable Material | | Steel | Stainless Steel | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Overall Length (OAL) | 57 mm |
| Tool Type | Square Endmill |
| Cutting Edge Material | Carbide |
| Series/List # | NX |
| Coating | Duro-Si |
$ 110.94
6 mm Cutting Dia. × 6 mm Shank Dia. × 21 mm LOC × 63 mm OAL, 4 Flute, Carbide, Duro-Si, Corner Radius, HX-RNVS
Item #: FR10H8617300
Brand: Fraisa USA Inc
Model #: H8617300
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 21 mm |
| Applicable Material | | Steel | Hard Materials | |
| Overall Length (OAL) | 63 mm |
| Tool Type | Corner Radius |
| Cutting Edge Material | Carbide |
| Series/List # | HX-RNVS |
| Coating | Duro-Si |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.5 mm |
$ 126.54
1/64″ Cutting Dia. × 1/8″ Shank Size × 0.023″ LOC × 1-1/2″ OAL, 4 Flute, Carbide, AlTiN Nano, Square End Mill
Item #: GE90841615C6
Brand: Harvey Tool
Model #: 841615-C6
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/64″ |
| Usable Length (LU) | 0.023″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Applicable Material | | Super-Alloys / Titanium | |
| Depth of Cut Maximum (APMX) | 0.023″ |
| Length Group | 1.5D |
| Overall Length (OAL) | 1-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | AlTiN Nano |
| Decimal Equivalent | 0.015″ |
| Flute Count (NOF) | 4 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 34 Degrees |
| Shank Size (SS) | 1/8″ |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Square |
| Single / Double End | Single End |
$ 52.62
0.035″ Cutting Dia. × 1/8″ Shank Size × 0.053″ LOC × 1-1/2″ OAL, 4 Flute, Carbide, AlTiN Nano, Square End Mill
Item #: GE90841635C6
Brand: Harvey Tool
Model #: 841635-C6
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.035″ |
| Usable Length (LU) | 0.053″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Applicable Material | | Super-Alloys / Titanium | |
| Depth of Cut Maximum (APMX) | 0.053″ |
| Length Group | 1.5D |
| Overall Length (OAL) | 1-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | AlTiN Nano |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Shank Size (SS) | 1/8″ |
| Flute Helix Angle (FHA) | 34 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
| End Shape | Square |
$ 38.54
82456 3 FL 3/16 EM ZPLUS
Item #: HS1082456
Brand: Helical Solutions
Model #: 82456
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Flute Helix Angle (FHA) | 40 Degrees |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Depth of Cut Maximum (APMX) | 1-3/8″ |
| Corner Radius (RE) | 0.094″ |
| Overall Length (OAL) | 3″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.1875″ |
| Coating | ZPLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Center Cutting | Yes |
$ 44.85
0.093″ Dia. × 0.1395″ LOC × 1/8″ Shank Dia. × 3″ OAL, 3 Flute, Carbide, Square End Mill
Item #: KE11930003772
Brand: Keo
Model #: 930-003-772
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.093″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 0.1395″ |
| Length Group | Stub |
| Overall Length (OAL) | 3″ |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Center Cutting | Yes |
$ 48.55
3/64-4FL-DE-STUB BN TiN
Item #: MW21242001012
Brand: Monster Tool Company
Model #: 242-001012
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/64″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 3/32″ |
| Length Group | Stub |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.0469″ |
| Coating | TiN |
| Series/List # | 242 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Single / Double End | Double End |
$ 27.14
.019-4FL-SE-REG-BALL
Item #: MW21250340019
Brand: Monster Tool Company
Model #: 250-340019
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.019″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 0.057″ |
| Length Group | Regular |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.019″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Super-Alloys / Titanium | |
| Single / Double End | Single End |
$ 32.70
.019-4FL-SE-REG-BALL-AlTiN
Item #: MW21250340019B
Brand: Monster Tool Company
Model #: 250-340019B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.019″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 0.057″ |
| Length Group | Regular |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.019″ |
| Coating | TiAlN |
| Series/List # | 250 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Super-Alloys / Titanium | |
| Single / Double End | Single End |
$ 38.32
.033-4FL-SE-REG-BALL
Item #: MW21250340033
Brand: Monster Tool Company
Model #: 250-340033
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.033″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 0.099″ |
| Length Group | Regular |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.033″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Super-Alloys / Titanium | |
| Single / Double End | Single End |
$ 25.73
Square End Mill; 1/4″ Dia. × 1/2″ LOC × 3/8″ Shank Dia. × 2-5/16″ OAL, 2 Flutes, HSS M42, AlTiN
Item #: TA15TE82810
Brand: Titan USA
Model #: TE82810
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Shank Type | Weldon |
| Depth of Cut Maximum (APMX) | 1/2″ |
| End Shape | Square |
| Overall Length (OAL) | 2-5/16″ |
| Usable Length (LU) | 1/2″ |
| Cutting Edge Material | HSSCo |
| Decimal Equivalent | 0.25″ |
| Coating | AlTiN |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Center Cutting | Yes |
$ 32.13
10 mm Dia. × 30 mm LOC × 10 mm Shank Dia. × 72 mm OAL, Carbide, Zr, Ballnose End Mill
Item #: ER452737F010
Brand: EMUGE-FRANKEN
Model #: 2737F.010
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 10 mm |
| Coating | Zr |
| Connection Diameter Machine Side (DCONMS) | 10 mm |
| Shank Type | Round |
| Depth of Cut Maximum (APMX) | 30 mm |
| Applicable Material | | Other Non-Metallic Materials | |
| Overall Length (OAL) | 72 mm |
| Tool Type | Ballnose Endmill |
| Cutting Edge Material | Carbide |
$ 219.78
Chamfer End Mill; 16 mm Dia. × 32 mm LOC × 16 mm Shank Dia. × 92 mm OAL ; 3 FL ; Carbide ; Bright ; Series 2545
Item #: ER452545016
Brand: EMUGE-FRANKEN
Model #: 2545.016
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 16 mm |
| End Shape | Chamfer |
| Connection Diameter Machine Side (DCONMS) | 16 mm |
| Application | | Soft Materials Finishing | |
| Depth of Cut Maximum (APMX) | 32 mm |
| Coolant Supply Property (CSP) | External |
| Overall Length (OAL) | 92 mm |
| Decimal Equivalent | 0.6299″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Metric |
| Coating | Bright |
| Series/List # | 2545 |
| Flute Count (NOF) | 3 |
$ 336.78
Corner Radius End Mill; 10 mm Dia. × 22 mm LOC × 10 mm Shank Dia. × 72 mm OAL ; 3 FL ; Carbide ; Bright ; Series 2546
Item #: ER452546010015
Brand: EMUGE-FRANKEN
Model #: 2546.010015
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 10 mm |
| End Shape | Corner Radius |
| Connection Diameter Machine Side (DCONMS) | 10 mm |
| Application | | Soft Materials Finishing | |
| Depth of Cut Maximum (APMX) | 22 mm |
| Corner Radius (RE) | 1.5 mm |
| Overall Length (OAL) | 72 mm |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.3937″ |
| Coating | Bright |
| Measurement Type | Metric |
| Flute Count (NOF) | 3 |
| Series/List # | 2546 |
$ 157.72
Corner Radius End Mill; 10 mm Dia. × 22 mm LOC × 10 mm Shank Dia. × 72 mm OAL ; 4 FL ; Carbide ; AlTiN ; 0.5 mm R ; Series Jet-Cut
Item #: ER4519460
Brand: EMUGE-FRANKEN
Model #: 1987A.010
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 10 mm |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 10 mm |
| Shank Type | Weldon |
| Depth of Cut Maximum (APMX) | 22 mm |
| End Shape | Corner Radius |
| Overall Length (OAL) | 72 mm |
| Applicable Material | | Steel | Cast Iron | Hard Materials | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Carbide |
| Series/List # | Jet-Cut |
| Coating | AlTiN |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.5 mm |
$ 231.84
Corner Radius End Mill; 16 mm Dia. × 32 mm LOC × 16 mm Shank Dia. × 92 mm OAL ; 3 FL ; Carbide ; Bright ; Series 2546
Item #: ER452546016020
Brand: EMUGE-FRANKEN
Model #: 2546.016020
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 16 mm |
| End Shape | Corner Radius |
| Connection Diameter Machine Side (DCONMS) | 16 mm |
| Application | | Soft Materials Finishing | |
| Depth of Cut Maximum (APMX) | 32 mm |
| Corner Radius (RE) | 2 mm |
| Overall Length (OAL) | 92 mm |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.6299″ |
| Coating | Bright |
| Measurement Type | Metric |
| Flute Count (NOF) | 3 |
| Series/List # | 2546 |
$ 349.74
Corner Radius End Mill; 16 mm Dia. × 32 mm LOC × 16 mm Shank Dia. × 92 mm OAL ; 3 FL ; Carbide ; Bright ; Series 2546
Item #: ER452546016030
Brand: EMUGE-FRANKEN
Model #: 2546.016030
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 16 mm |
| End Shape | Corner Radius |
| Connection Diameter Machine Side (DCONMS) | 16 mm |
| Application | | Soft Materials Finishing | |
| Depth of Cut Maximum (APMX) | 32 mm |
| Corner Radius (RE) | 3 mm |
| Overall Length (OAL) | 92 mm |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.6299″ |
| Coating | Bright |
| Measurement Type | Metric |
| Flute Count (NOF) | 3 |
| Series/List # | 2546 |
$ 356.13