Abrasives, Files & Deburring Tools > Coated Abrasives (ET03) - (21776 Products)
Ballnose End Mill; 19/64″ Dia. × 13/16″ LOC × 5/16″ Shank Dia. × 2-1/2″ OAL, 3 FL, Carbide, Uncoated
Item #: TA15TC12919
Brand: Titan USA
Model #: TC12919
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 19/64″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Usable Length (LU) | 13/16″ |
| Depth of Cut Maximum (APMX) | 13/16″ |
| Corner Radius (RE) | 0.1484″ |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.2969″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Center Cutting | Yes |
2 1/2 in × 60 in Cloth 36 Alt Mfg # 27729
Item #: TM1027729
Brand: 3M
Model #: 00051115277290
| Product Specifications | |
|---|---|
| Width | 2 1/2″ |
| Backing Material | Polyester Cloth |
| Length | 60″ |
| Backing Weight | YF |
| Abrasive Material | Ceramic |
| Standard Pack | 50 |
| Grit | 36 |
Brand: Panduit / Part #: LCA8-10F-L
Item #: 30975205
Brand: Panduit
Model #: LCA8-10F-LProduct Specifications
Terminal Type
Right Angle
Insulation Type
Non-Insulated
Connection Type
Compression
Compatible Wire Size (AWG)
8
Stud Size (#)
10
Contact Material
Copper
Contact Plating
TiN
Thickness (Decimal Inch - 4 Decimals)
0.0800
Ring Width (Decimal Inch)
0.4100
Overall Length (Decimal Inch)
0.9000
K Dia. x 0.315″ Shank × 2.4016″ Usable Length × 4.3307″ OAL, 8xD, 140 Degree, AlTiN, 2 Flute, Coolant Through, HP Patriot Solid Carbide Drill
Item #: AV41928000617
Brand: Keo
Model #: 928-000-617
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | | K | |
| Shank Length (LS) | 1.4173″ |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | K |
| Shank Type | Round |
| Length Group | 8xD |
| Measurement Type | Letter |
| Coating | TiAlN |
| Usable Length (LU) | 2.4016″ |
| Connection Diameter Machine Side (DCONMS) | 0.315″ |
| Overall Length (OAL) | 4.3307″ |
| Coolant Supply Property (CSP) | Coolant Thru |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 140 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 2.8346″ |
| Single / Double End | Single End |
3M Cloth Belt 707E P100 JE-weight 1 in × 42 in Film-lok Single-flex
Item #: TM1018361
Brand: 3M
Model #: 00051125183611
| Product Specifications | |
|---|---|
| Width | 1″ |
| Backing Material | Rayon Cloth |
| Length | 42″ |
| Backing Weight | JE |
| Abrasive Material | Ceramic |
| Color | Orange |
| Grit | P100 |
| Standard Pack | 200 |
3M Cloth Belt 461F P60 YF-weight 3″ × 90″ Sine-lok Single-flex
Item #: TM1076902
Brand: 3M
Model #: 00051119769029
| Product Specifications | |
|---|---|
| Width | 3″ |
| Backing Material | Polyester Cloth |
| Length | 90″ |
| Backing Weight | YF |
| Abrasive Material | Silicon Carbide |
| Standard Pack | 50 |
| Grit | P60 |
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.7113M
Item #: 97292296
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.7113MProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00001/-0.00001
Blank Number Wire Size
#3
Inner Diameter (Decimal Inch)
0.7113
Calibrated
No
Traceability Certification Included
No
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
2″ × 72″-50 Grit - Aluminum Oxide - Resin Waterproof Cloth Belt
Item #: MM4254757
Brand: Carborundum
Model #: 05539554757
| Product Specifications | |
|---|---|
| Width | 2″ |
| Grit | P50 |
| Length | 72″ |
| Standard Pack | 5 |
| Abrasive Material | Aluminum Oxide |
1/8″ Cutting Dia. × 1/4″ Shank Dia. × 3/8″ LOC × 2-1/4″ OAL, 4 Flute, Carbide, Polychrom, Square Endmill, E-Cut
Item #: FR10P98311188
Brand: Fraisa USA Inc
Model #: P98311188
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| End Shape | Square |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | |
| Depth of Cut Maximum (APMX) | 3/8″ |
| Tool Type | Square Endmill |
| Overall Length (OAL) | 2-1/4″ |
| Decimal Equivalent | 0.125″ |
| Cutting Edge Material | Carbide |
| Series/List # | E-Cut |
| Coating | Polychrom |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.002″ |
| Flute Count (NOF) | 4 |
3M Cloth Belt 707E 80 JE-weight 1-1/4 in × 132 in Film-lok Single-flex
Item #: TM1067690
Brand: 3M
Model #: 00051111676905
| Product Specifications | |
|---|---|
| Width | 1 1/4″ |
| Backing Material | Rayon Cloth |
| Length | 132″ |
| Backing Weight | JE |
| Abrasive Material | Ceramic |
| Color | Orange |
| Grit | 80 |
| Standard Pack | 50 |
HEV-L-50625-R.120 APLUS COATED
Item #: HS1045354
Brand: Helical Solutions
Model #: 45354
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Corner Radius (RE) | 0.12″ |
| Depth of Cut Maximum (APMX) | 2-1/2″ |
| Length Group | 4D |
| Overall Length (OAL) | 5″ |
| Decimal Equivalent | 0.625″ |
| Coating | APLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 5 |
| Shank Length (LS) | 2.5″ |
0.02″ Cutting Dia. × 0.06″ LCF × 1-1/2″ OAL × 1/8″ Connection Dia., 4 Flute, Carbide, Uncoated Solid Counterbore
Item #: GE9023320
Brand: Harvey Tool
Model #: 23320
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.02″ |
| Shank Type | Round |
| Length Chip Flute (LCF) | 0.06″ |
| Coating | Uncoated |
| Overall Length (OAL) | 1-1/2″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
Brand: Accupro / Part #: 14788664
Item #: 29767340
Brand: Accupro
Model #: 14788664Product Specifications
Mill Diameter (Inch)
1/2
Mill Diameter (Decimal Inch)
0.5000
Length of Cut (Inch)
3
End Mill Material
Solid Carbide
Coating/Finish
AlTiN+
Chipbreaker
No
Number Of Flutes
3
End Type
Single
Extended Reach
No
Undercutting
No
Shank Diameter (Inch)
1/2
Shank Diameter (Decimal Inch)
0.5000
Overall Length (Inch)
6
Overall Length (Decimal Inch)
6.0000
Maximum Helix Angle
42.00
Minimum Helix Angle
38.00
Flute Type
Medium
Shank Type
Cylindrical
Length Of Cut (Decimal Inch - 4 Decimals)
3.0000
3M Cubitron ll Cloth Belt 784F 120+ XF-weight 2″ × 72″ Film-lok Single-flex
Item #: TM1045569
Brand: 3M
Model #: 00076308455699
| Product Specifications | |
|---|---|
| Width | 2″ |
| Backing Material | Polyester Cloth |
| Length | 72″ |
| Backing Weight | YF |
| Abrasive Material | Precision Shaped Ceramic Grain |
| Standard Pack | 50 |
| Grit | 120 |
4 × 64″ P40 CLOTH BELT Alt Mfg # 23665
Item #: TM1023665
Brand: 3M
Model #: 00051125236652
| Product Specifications | |
|---|---|
| Width | 4″ |
| Grit | P400 |
| Length | 64″ |
| Standard Pack | 50 |
| Abrasive Material | Silicon Carbide |
Brand: Williams / Part #: JHWBCO12
Item #: 82321159
Brand: Williams
Model #: JHWBCO12Product Specifications
Drive Size
3/8 in
Wrench Size (Inch)
3/8
Material
Steel
Overall Length (Inch)
1-19/64
Head Thickness
33/64
Head Diameter (Inch)
7/8
System Of Measurement
Inch
Thread Mill; 1/2″ × 1/2″ Shank Dia. × 3″ OAL ; Carbide ; Amorphous Diamond
Item #: GE9041470C4
Brand: Harvey Tool
Model #: 41470-C4
| Product Specifications | |
|---|---|
| Thread Size | 1/2″ |
| Threads per Inch Maximum (TPIX) | 32 |
| Thread Standard | UN |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Flute Type | Spiral |
| Cutting Diameter (DC) | 0.388″ |
| Measurement Type | Inch |
| Functional Length (LF) | 1-1/4″ |
| Tool Type | Single Form |
| Overall Length (OAL) | 3″ |
| Cutting Direction (HAND) | | Left Hand | Right Hand | |
| Flute Count (NOF) | 4 |
| Body Material | Carbide |
| Shank Type | Round |
| Connection Code Machine Side (CCMS) | Cylindrical |
| Coating | Amorphous Diamond |
| Thread Form Type (THFT) | UN60 |
| Threads per Inch Minimum (TPIN) | 9 |
1/8″ Dia. × 0.022″ LOC × 1/8″ Shank Size × 1-1/2″ OAL, 90 Degrees, Carbide, Uncoated, Chamfer Cutters
Item #: GE90943415
Brand: Harvey Tool
Model #: 943415
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Coating | Uncoated |
| Decimal Equivalent | 0.125″ |
| Shank Type | Round |
| Usable Length (LU) | 0.022″ |
| End Shape | Back Chamfer |
| Flute Count (NOF) | 5 |
| Length Group | 3D |
| Flute Helix Angle (FHA) | 12 Degrees |
| Neck Length (LN) | 7/32″ |
| Depth of Cut Maximum (APMX) | 0.022″ |
| Measurement Type | Inch |
| Overall Length (OAL) | 1-1/2″ |
| Series/List # | Specialty Profiles |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Body Material | Carbide |
| Point Angle (SIG) | 90 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Cutting Edge Material | Carbide |
| Single / Double End | Single End |
3M Trizact Cloth Belt 337DC A300 X-weight 2″ × 72″ Film-lok No Flex
Item #: TM1033157
Brand: 3M
Model #: 00048011331577
| Product Specifications | |
|---|---|
| Width | 2″ |
| Backing Weight | X |
| Length | 72″ |
| Trade Name | Trizact |
| Abrasive Material | Aluminum Oxide |
| Standard Pack | 5 |
| Backing Material | Cloth |
Brand: YG-1 / Part #: D2GP187225
Item #: 70857883
Brand: YG-1
Model #: D2GP187225
Specifications
 | |
| MSC Part # | 70857883 |
| Mfr Part # | D2GP187225 |
| Country of OriginCountry of Origin is subject to change | South Korea |