Products - (25001 Products)
#20 Dia. × 0.2362″ Shank × 1.1417″ Usable Length × 2.9134″ OAL, 5xD, 140 Degree, AlTiN, 2 Flute, Coolant Through, HP Patriot Solid Carbide Drill
Item #: AV41928000316
Brand: Keo
Model #: 928-000-316
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | #20 |
| Shank Length (LS) | 1.4173″ |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #20 |
| Shank Type | Round |
| Length Group | 5xD |
| Measurement Type | Wire Gauge |
| Coating | TiAlN |
| Usable Length (LU) | 1.1417″ |
| Connection Diameter Machine Side (DCONMS) | 0.2362″ |
| Overall Length (OAL) | 2.9134″ |
| Coolant Supply Property (CSP) | Coolant Thru |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 140 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 1.4173″ |
| Single / Double End | Single End |
$ 106.80
#39 (.0995″) Circuit Board Drill
Item #: AV41925000114
Brand: Keo
Model #: 925-000-114
| Product Specifications | |
|---|---|
| Angle | 130 Degrees |
| Flute Count (NOF) | 2 |
| Coolant Supply Property (CSP) | External |
| Overall Length (OAL) | 1-1/2″ |
| Cutting Edge Material | Carbide |
| Shank Type | Straight |
| Flute Length | 0.4″ |
| Tool Diameter | #39 |
| Usable Length (LU) | 0.4″ |
$ 9.53
#424-2 Squeeze Action Clamp Style; 200 lbs Holding Capacity - Toggle Clamp
Item #: MA504242
Brand: De-Sta-Co
Model #: 424-2
| Product Specifications | |
|---|---|
| Style | Squeeze Action Clamp |
| Includes | 431208-M Spindle |
| Type | Toggle Clamp |
| Jaw Depth | 1.08″ |
| Holding Capacity | 200 lbs |
| Overall Width | 0.66″ |
| Overall Height | 1.91″ |
| Spindle Size | M6 |
| Overall Length | 4.63″ |
| Maximum Clamping Thickness | .29″ |
| Spindle | .66″ |
| Toggle Lock Plus Lever | No |
| Thread Size | M6 |
$ 28.94
#80050 - M4 Thread Size Machine Uniforce Clamp with Locking Plate
Item #: SG7080050
Brand: Mitee-Bite
Model #: 80050
| Product Specifications | |
|---|---|
| Type | Uniforce Clamp |
| Holding Force | 1,640 lbs |
| Thread Size | M4 |
| Clamp Length | 15.7 mm |
| Overall Length | 15.7 mm |
| Outer Edge Screw | M2 |
| Overall Width | 28.6 mm |
| Style | Metric |
| Model No | 500 |
| Contact Depth | 6.3mm |
| Clamp Height | 12.7 mm |
| Machineable Stock | 4.6mm |
| Base Width | 10.67 mm |
| Centerline Distance | 4.6 mm |
$ 23.97
#80055 - M4 Thread Size Machine Uniforce Clamp without Locking Plate
Item #: SG7080055
Brand: Mitee-Bite
Model #: 80055
| Product Specifications | |
|---|---|
| Type | Uniforce Clamp |
| Holding Force | 1,640 lbs |
| Thread Size | M4 |
| Clamp Length | 15.7 mm |
| Overall Length | 15.7 mm |
| Outer Edge Screw | M2 |
| Overall Width | 28.6 mm |
| Style | Metric |
| Model No | 500 |
| Contact Depth | 6.3mm |
| Clamp Height | 12.7 mm |
| Machineable Stock | 4.6mm |
| Base Width | 10.67 mm |
| Centerline Distance | 4.6 mm |
$ 18.81
#80075 - M6 Thread Size Machine Uniforce Clamp with Locking Plate
Item #: SG7080075
Brand: Mitee-Bite
Model #: 80075
| Product Specifications | |
|---|---|
| Type | Uniforce Clamp |
| Holding Force | 4,930 lbs |
| Thread Size | M6 |
| Clamp Length | 23.9 mm |
| Overall Length | 23.9 mm |
| Outer Edge Screw | M4 |
| Overall Width | 38.1 mm |
| Style | Metric |
| Model No | 750 |
| Contact Depth | 9.4mm |
| Clamp Height | 19.1 mm |
| Machineable Stock | 6.6mm |
| Base Width | 16.05 mm |
| Centerline Distance | 6.6 mm |
$ 25.34
#80080 - M6 Thread Size Machine Uniforce Clamp without Locking Plate
Item #: SG7080080
Brand: Mitee-Bite
Model #: 80080
| Product Specifications | |
|---|---|
| Type | Uniforce Clamp |
| Holding Force | 4,930 lbs |
| Thread Size | M6 |
| Clamp Length | 23.9 mm |
| Overall Length | 23.9 mm |
| Outer Edge Screw | M4 |
| Overall Width | 38.1 mm |
| Style | Metric |
| Model No | 750 |
| Contact Depth | 9.4mm |
| Clamp Height | 19.1 mm |
| Machineable Stock | 6.6mm |
| Base Width | 16.05 mm |
| Centerline Distance | 6.6 mm |
$ 19.52
* B6H Partial Stainless Hose C
Item #: LX5035125
Brand: Precision Brand
Model #: 35125
Product Specifications
Type
Hose Clamp
Maximum Opening
7/8″
Material
Part Stainless Steel
Standard Pack
10
Model No
35125
Minimum Diameter
3/8″
Hex Key Size
5/16″
Diameter
3/8″ - 7/8″
Country of Origin
USA
$ 2.72
.4733 ST FL RHC REAMER
Item #: MW205000004733
Brand: Monster Tool Company
Model #: 500-0004733
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.4733″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-3/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-3/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.4733″ |
| Decimal Equivalent | 0.4733″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
$ 151.27
.4913 ST FL RHC REAMER
Item #: MW205000004913
Brand: Monster Tool Company
Model #: 500-0004913
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.4913″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/2″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/2″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.4913″ |
| Decimal Equivalent | 0.4913″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 1″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
$ 151.27
.5001 ST FL RHC REAMER
Item #: MW205000005001
Brand: Monster Tool Company
Model #: 500-0005001
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.5001″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/2″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/2″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.5001″ |
| Decimal Equivalent | 0.5001″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 1″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
$ 151.27
.7765 Minus Class ZZ Pin Gage
Item #: JR507765M
Brand: Vermont Gage
Model #: 111477650
| Product Specifications | |
|---|---|
| Diameter | 0.7765 |
| Class | ZZ |
| Type | Minus |
| Tolerance | 0.0002 |
$ 9.43
0-3 CAP LIGHT DUTY C-CLAMP
Item #: SG75CM30
Brand: Bessey
Model #: CM30
| Product Specifications | |
|---|---|
| Clamp Type | Malleable Cast |
| Clamping Force | 800 lbs |
| Minimum Opening | 0″ |
| Spindle Diameter | 1/2″ |
| Maximum Opening | 3″ |
| Model No | CM30 |
| Throat Depth | 1 3/4″ |
| Weight | .90 lbs |
$ 7.30
0-4″ CAP STD DUTY L-CLAMP
Item #: JB509629304
Brand: Palmgren
Model #: 9629304
| Product Specifications | |
|---|---|
| Type | Regular Duty L Clamp |
| Spindle Diameter | 1/2″ |
| Throat Depth | 2 3/8″ |
| Total Capacity | 4 |
| Clamping Pressure | 600 lbs |
| Model No | 9629304 |
$ 30.59
0-6″ CAP STD DUTY L-CLAMP
Item #: JB509629306
Brand: Palmgren
Model #: 9629306
| Product Specifications | |
|---|---|
| Type | Regular Duty L Clamp |
| Spindle Diameter | 9/16″ |
| Throat Depth | 3 5/32″ |
| Total Capacity | 6 |
| Clamping Pressure | 700 lbs |
| Model No | 9629306 |
$ 35.69
0.437″ Diameter × 10″ OAL, Brass, 84 Series Tube Brush-For Thru Holes
Item #: MJ7484B437
Brand: Brush Research
Model #: 84B437
| Product Specifications | |
|---|---|
| Type | 84 Series Tube Brush-For Thru Holes |
| Bristle Diameter | 0.005″ |
| Diameter | 0.437″ |
| Bore Diameter | 0.437″ |
| Stem Diameter | 0.168″ |
| Series | 84 Series Tube Brush-For Thru Holes |
| Abrasive Material | Brass |
| Brush Diameter | 0.437″ |
| Overall Length | 10″ |
$ 7.17
0.625″ Dia. × 0.625″ Shank × 0.75″ DOC × 6″ OAL, UN, 3 Flute, Ballnose End Mill
Item #: HS1047330
Brand: Helical Solutions
Model #: 47330
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Neck Diameter (DN) | 0.593″ |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Neck Length (LN) | 2.625″ |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Length Group | 1D |
| Overall Length (OAL) | 6″ |
| Decimal Equivalent | 0.625″ |
| Coating | UN |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 2.625″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
$ 170.08
00418 .051 4FL SQ ENDMILL
Item #: DD9000418
Brand: KYOCERA SGS Precision Tools
Model #: 00418
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.051″ |
| Neck Diameter (DN) | 0.0479″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Tool Type | Solid Carbide Endmill |
| Depth of Cut Maximum (APMX) | 0.077″ |
| Length Group | 1.5D |
| Overall Length (OAL) | 1-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | Uncoated |
| Body Material | Carbide |
| Flute Count (NOF) | 4 |
| Series/List # | M4S |
| Flute Helix Angle (FHA) | 30 Degrees |
| Shank Size (SS) | 1/8″ |
| Shank Type | Round |
| Shank Length (LS) | 1.423″ |
| End Shape | Square |
| Cutting Direction (HAND) | Right Hand |
| Usable Length (LU) | 0.077″ |
| Single / Double End | Single End |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | Other Non-Metallic Materials | |
| Center Cutting | Yes |
$ 15.97
04043 .0080 3F SQ ENDMILL
Item #: DD9004043
Brand: KYOCERA SGS Precision Tools
Model #: 04043
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.008″ |
| Tool Type | Solid Carbide Endmill |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Length Group | 1.5D |
| Depth of Cut Maximum (APMX) | 0.012″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 1-1/2″ |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | Uncoated |
| Series/List # | M3S |
| Flute Count (NOF) | 3 |
| Shank Size (SS) | 1/8″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Shank Length (LS) | 1.488″ |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Square |
| Single / Double End | Single End |
| Usable Length (LU) | 0.012″ |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | Other Non-Metallic Materials | |
$ 49.65
1,000 lbs Capacity - J-Hook - Pull Action Latch - Pull Action Latch Toggle Clamps
Item #: SG6670040
Brand: Jergens
Model #: 70040
| Product Specifications | |
|---|---|
| Style | Pull Action Latch |
| Mounting Length | 1.12″ |
| Type | Pull Action Latch Toggle Clamps |
| Mounting Width | 2.37″ |
| Height Under Clamp Arm | 1.81″ |
| Overall Width | 3.35″ |
| Holding Capacity | 1,000 lbs |
| Base Length | 2.12″ |
| Overall Height | 2.65″ |
| Hook Diameter | 0.62″ |
| Overall Length | 13.21″ |
| Latch Distance | 2.75″-3.60″ |
| Bar Style | J-Hook |
| Range | 0.85″ |
| Mounting Diameter | 0.41″ |
| Toggle Lock Plus Lever | No |
$ 31.09