Products - (25001 Products)
5.5 mm Bore Diameter × 1 1/2″ Hone Length × 8″ Overall Length, 800 Grit, Silicon Carbide - Standard Duty Flex-Hone
Item #: MJ73BC55M800
Brand: Brush Research
Model #: BC55M800
| Product Specifications | |
|---|---|
| Type | Standard Duty Flex-Hone |
| Hone Length | 1 1/2″ |
| Abrasive Material | Silicon Carbide |
| Overall Length | 8″ |
| Grit | 800 |
| Specification | Ferrous Materials |
| Bore Diameter | 5.5 mm |
$ 40.50
5.5 mm Dia. × 6 mm Shank × 48 mm Usable Length × 94 mm OAL, 8xD, 140 Degree, AlTiN, 2 Flute, Coolant Through, HP Patriot Solid Carbide Drill
Item #: AV41928000585
Brand: Keo
Model #: 928-000-585
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 5.5 mm |
| Functional Length (LF) | 56 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 5.5 mm |
| Measurement Type | Metric |
| Length Group | 8xD |
| Usable Length (LU) | 48 mm |
| Coating | TiAlN |
| Overall Length (OAL) | 94 mm |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Flute Count (NOF) | 2 |
| Coolant Supply Property (CSP) | Coolant Thru |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 140 Degrees |
$ 146.45
5.5mm ST FL RHC REAMER
Item #: MW20500004005.5
Brand: Monster Tool Company
Model #: 500-004005.5
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5.5 mm |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 25 mm |
| Measurement Type | Metric |
| Cutting Edge Length (L) | 25 mm |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 5.5 mm |
| Decimal Equivalent | 0.2165″ |
| Flute Count (NOF) | 4 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 76 mm |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Neck Length (LN) | 3/4″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
$ 29.02
5.6 mm Dia. × 6 mm Shank × 20 mm Usable Length × 66 mm OAL, 3xD, 140 Degree, AlTiN, 2 Flute, Coolant Through, HP Patriot Solid Carbide Drill
Item #: AV41928000111
Brand: Keo
Model #: 928-000-111
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 5.6 mm |
| Functional Length (LF) | 28 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 5.6 mm |
| Measurement Type | Metric |
| Length Group | 3xD |
| Usable Length (LU) | 20 mm |
| Coating | TiAlN |
| Overall Length (OAL) | 66 mm |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Flute Count (NOF) | 2 |
| Coolant Supply Property (CSP) | Coolant Thru |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 140 Degrees |
$ 115.40
5.6mm ST FL RHC REAMER
Item #: MW20500004005.6
Brand: Monster Tool Company
Model #: 500-004005.6
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5.6 mm |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 25 mm |
| Measurement Type | Metric |
| Cutting Edge Length (L) | 25 mm |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 5.6 mm |
| Decimal Equivalent | 0.2205″ |
| Flute Count (NOF) | 4 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 76 mm |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Neck Length (LN) | 3/4″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
$ 45.58
5.81 mm Dia. × 0.236″ Shank Dia. × 3.98″ OAL, 6 Flute, Carbide Reamer
Item #: FB5088860005810
Brand: duMont
Model #: 88860005810
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5.81 mm |
| Overall Length (OAL) | 3.98″ |
| Usable Length (LU) | 2.795″ |
| Grade | K15 |
| Cutting Edge Length (L) | 1.102″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 0.236″ |
| Tool Type | Reamer |
| Flute Count (NOF) | 6 |
$ 88.61
5.82 mm Dia. × 0.236″ Shank Dia. × 3.98″ OAL, 6 Flute, Carbide Reamer
Item #: FB5088860005820
Brand: duMont
Model #: 88860005820
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5.82 mm |
| Overall Length (OAL) | 3.98″ |
| Usable Length (LU) | 2.795″ |
| Grade | K15 |
| Cutting Edge Length (L) | 1.102″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 0.236″ |
| Tool Type | Reamer |
| Flute Count (NOF) | 6 |
$ 88.61
5.83 mm Dia. × 0.236″ Shank Dia. × 3.98″ OAL, 6 Flute, Carbide Reamer
Item #: FB5088860005830
Brand: duMont
Model #: 88860005830
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5.83 mm |
| Overall Length (OAL) | 3.98″ |
| Usable Length (LU) | 2.795″ |
| Grade | K15 |
| Cutting Edge Length (L) | 1.102″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 0.236″ |
| Tool Type | Reamer |
| Flute Count (NOF) | 6 |
$ 88.61
5/16 Round Broach
Item #: FB5077731
Brand: duMont
Model #: 77731
| Product Specifications | |
|---|---|
| Tool Type | Broaches |
| Cutting Depth | 3/4″ |
| Shape | Round |
| Maximum Cut | 3/4″ |
| Size | 5/16″ |
| Minimum Cut | 5/16″ |
| Overall Length (OAL) | 5-7/8″ |
| Cutting Edge Material | HSS |
$ 327.68
5/16 HM 3D BALL XL TIALN 2FL
Item #: ER4519078
Brand: EMUGE-FRANKEN
Model #: 1960A.03125
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Application | | Finishing | |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Tool Type | Ball Nose / Tapered |
| Overall Length (OAL) | 4″ |
| End Shape | Ball Nose |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | TiAlN |
| Decimal Equivalent | 0.3125″ |
| Flute Count (NOF) | 2 |
| Measurement Type | Inch |
| Shank Type | HA |
| Series/List # | 1960A |
| Usable Length (LU) | 9/32″ |
$ 160.89
5/16X1X3 3FL 0.020CR Z
Item #: HS1059075
Brand: Helical Solutions
Model #: 59075
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Corner Radius (RE) | 0.02″ |
| Depth of Cut Maximum (APMX) | 1″ |
| Length Group | 3D |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.3125″ |
| Coating | ZPLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 2″ |
$ 48.81
5/16X1X3 3FL 0.030CR
Item #: HS1059077
Brand: Helical Solutions
Model #: 59077
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Corner Radius (RE) | 0.03″ |
| Depth of Cut Maximum (APMX) | 1″ |
| Length Group | 3D |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.3125″ |
| Coating | ZPLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 2″ |
$ 48.81
5/16″ Dia. × 0.315″ Shank × 1.1417″ Usable Length × 3.1102″ OAL, 3xD, 140 Degree, AlTiN, 2 Flute, Coolant Through, HP Patriot Solid Carbide Drill
Item #: AV41928000155
Brand: Keo
Model #: 928-000-155
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 5/16″ |
| Shank Length (LS) | 1.4173″ |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 5/16″ |
| Shank Type | Round |
| Decimal Equivalent | 0.3125″ |
| Measurement Type | Inch |
| Length Group | 3xD |
| Usable Length (LU) | 1.1417″ |
| Coating | TiAlN |
| Overall Length (OAL) | 3.1102″ |
| Connection Diameter Machine Side (DCONMS) | 0.315″ |
| Flute Count (NOF) | 2 |
| Coolant Supply Property (CSP) | Coolant Thru |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 140 Degrees |
| Single / Double End | Single End |
| Functional Length (LF) | 1.6142″ |
$ 135.03
5/16″ Dia. × 0.315″ Shank × 1.6929″ Usable Length × 3.5827″ OAL, 5xD, 140 Degree, AlTiN, 2 Flute, Coolant Through, HP Patriot Solid Carbide Drill
Item #: AV41928000393
Brand: Keo
Model #: 928-000-393
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 5/16″ |
| Shank Length (LS) | 1.4173″ |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 5/16″ |
| Shank Type | Round |
| Decimal Equivalent | 0.3125″ |
| Measurement Type | Inch |
| Length Group | 5xD |
| Usable Length (LU) | 1.6929″ |
| Coating | TiAlN |
| Overall Length (OAL) | 3.5827″ |
| Connection Diameter Machine Side (DCONMS) | 0.315″ |
| Flute Count (NOF) | 2 |
| Coolant Supply Property (CSP) | Coolant Thru |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 140 Degrees |
| Single / Double End | Single End |
| Functional Length (LF) | 2.0866″ |
$ 175.41
5/16″ Dia. × 0.315″ Shank × 2.4016″ Usable Length × 4.3307″ OAL, 8xD, 140 Degree, AlTiN, 2 Flute, Coolant Through, HP Patriot Solid Carbide Drill
Item #: AV41928000631
Brand: Keo
Model #: 928-000-631
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 5/16″ |
| Shank Length (LS) | 1.4173″ |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 5/16″ |
| Shank Type | Round |
| Decimal Equivalent | 0.3125″ |
| Measurement Type | Inch |
| Length Group | 8xD |
| Usable Length (LU) | 2.4016″ |
| Coating | TiAlN |
| Overall Length (OAL) | 4.3307″ |
| Connection Diameter Machine Side (DCONMS) | 0.315″ |
| Flute Count (NOF) | 2 |
| Coolant Supply Property (CSP) | Coolant Thru |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 140 Degrees |
| Single / Double End | Single End |
| Functional Length (LF) | 2.8346″ |
$ 218.50
5/16″ Dia. × 1/2″ LOC × 5/16″ Shank Dia. × 2″ OAL, 4 Flute, Carbide, AlCrN, Corner Radius End Mill
Item #: KE11976000131
Brand: Keo
Model #: 976-000-131
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Length Group | Stub |
| Overall Length (OAL) | 2″ |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlCrN |
| Center Cutting | Yes |
| Flute Count (NOF) | 4 |
$ 44.49
5/16″ Dia. × 1/2″ LOC × 5/16″ Shank Dia. × 2″ OAL, 5 Flute, Carbide, AlCrN, Corner Radius End Mill
Item #: KE11976000279
Brand: Keo
Model #: 976-000-279
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Length Group | Stub |
| Overall Length (OAL) | 2″ |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlCrN |
| Center Cutting | Yes |
| Flute Count (NOF) | 5 |
$ 48.05
5/16″ × 0.045″ × 0.100R 2-Flute Carbide Corner Rounding Endmill
Item #: KE11932000872
Brand: Keo
Model #: 932-000-872
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.045″ |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Shank Type | Round |
| Overall Length (OAL) | 4″ |
| Corner Radius (RE) | 0.1″ |
| Cutting Edge Material | Carbide |
$ 116.09
5/32 CARB 3FL 150° PT DRILL
Item #: MW23453101562
Brand: Monster Tool Company
Model #: 453-101562
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 5/32″ |
| Functional Length (LF) | 1-3/8″ |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 5/32″ |
| Tool Type | Drill |
| Decimal Equivalent | 0.1563″ |
| Measurement Type | Inch |
| Length Group | Standard |
| Length Chip Flute (LCF) | 1-3/8″ |
| Coating | Bright |
| Overall Length (OAL) | 2-1/2″ |
| Application | | Drilling | |
| Flute Count (NOF) | 3 |
| Connection Diameter Machine Side (DCONMS) | 5/32″ |
| Cutting Direction (HAND) | Right Hand |
$ 20.65
5/32″ Cutting Dia. × 3/16″ Shank Size × 15/64″ LOC × 2″ OAL, 4 Flute, HSSCo, Ball Nose End Mill
Item #: KE11934000096
Brand: Keo
Model #: 934-000-096
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/32″ |
| Number of Teeth | 4 |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| End Shape | Ball Nose |
| Depth of Cut Maximum (APMX) | 15/64″ |
| Coolant Supply Property (CSP) | External |
| Overall Length (OAL) | 2″ |
| Decimal Equivalent | 0.1563″ |
| Cutting Edge Material | HSSCo |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Center Cutting | Yes |
| Corner Radius (RE) | 5/64″ |
| Single / Double End | Single End |
$ 42.09