Products - (25001 Products)
0.550″ Bore Diameter × 1 5/8″ Hone Length × 10″ Overall Length, 400 Grit, Silicon Carbide - 28 Gauge Flex-Hone for Firearm Forcing Cones
Item #: MJ7312241
Brand: Brush Research
Model #: 12241
| Product Specifications | |
|---|---|
| Type | 28 Gauge |
| Hone Length | 1 5/8″ |
| Abrasive Material | Silicon Carbide |
| Overall Length | 10″ |
| Grit | 400 |
| Specification | Firearm Forcing Cones |
| Bore Diameter | 0.550″ |
$ 65.76
1-1/2″ × 0.035″ × 1/16″ Small Diameter Cut-Off Wheel Type 01-Straight 60 Grit
Item #: MH60010027764
Brand: Norton Abrasives
Model #: 66243427764
| Product Specifications | |
|---|---|
| Diameter | 1-1/2″ |
| Maximum RPM | 40,745 |
| Thickness | 0.035″ |
| Bond Type | Resin |
| Arbor Hole | 1/16″ |
| Hardness | O |
| Reinforced | Reinforced |
| Specification | A60-OBNA2 |
| Grit | 60 |
| Type | Small Diameter Cut-Off Wheel |
| Wheel Type | Type 1 |
| Hole Size | 1/16″ |
| Abrasive Material | Aluminum Oxide |
$ 7.57
1-1/2″ × 0.035″ × 1/4″ Small Diameter Cut-Off Wheel Type 01-Straight 60 Grit Aluminum Oxide
Item #: MH600127875
Brand: Norton Abrasives
Model #: 66243427875
| Product Specifications | |
|---|---|
| Diameter | 1-1/2″ |
| Maximum RPM | 40,745 |
| Thickness | 0.035″ |
| Bond Type | Resin |
| Arbor Hole | 1/4″ |
| Hardness | O |
| Reinforced | Reinforced |
| Specification | A60-OBNA2 |
| Grit | 60 |
| Type | Small Diameter Cut-Off Wheel |
| Wheel Type | Type 1 |
| Hole Size | 1/4″ |
| Abrasive Material | Aluminum Oxide |
$ 7.82
1-1/2″ × 0.035″ × 1/8″ Small Diameter Cut-Off Wheel Type 01-Straight 60 Grit Aluminum Oxide
Item #: MH60010027831
Brand: Norton Abrasives
Model #: 66243427831
| Product Specifications | |
|---|---|
| Diameter | 1-1/2″ |
| Maximum RPM | 40,745 |
| Thickness | 0.035″ |
| Bond Type | Resin |
| Arbor Hole | 1/8″ |
| Hardness | O |
| Reinforced | Reinforced |
| Specification | A60-OBNA2 |
| Grit | 60 |
| Type | Small Diameter Cut-Off Wheel |
| Wheel Type | Type 1 |
| Hole Size | 1/8″ |
| Abrasive Material | Aluminum Oxide |
$ 7.57
1/16″ Cutting Dia. × 1/4″ Shank Size × 0.05″ LOC × 2-1/2″ OAL, 2 Flute, Carbide, AlTiN Nano, 0.01″ Corner Radius End Mill
Item #: GE90782962C6
Brand: Harvey Tool
Model #: 782962-C6
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Application | | Finishing | |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Corner Radius (RE) | 0.01″ |
| Depth of Cut Maximum (APMX) | 0.05″ |
| Neck Diameter (DN) | 0.06″ |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | 7D |
| Cutting Edge Material | Carbide |
| Flute Type | Spiral |
| Coating | AlTiN Nano |
| Body Material | Carbide |
| Flute Count (NOF) | 2 |
| Decimal Equivalent | 0.062″ |
| Flute Helix Angle (FHA) | 20 Degrees |
| Measurement Type | Inch |
| Shank Type | Round |
| Shank Size (SS) | 1/4″ |
| End Shape | Corner Radius |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.01″ |
| Usable Length (LU) | 7/16″ |
| Cutting Direction (HAND) | Right Hand |
| Applicable Material | | Hard Materials | |
| Single / Double End | Single End |
$ 79.54
1/16″ Cutting Dia. × 1/4″ Shank Size × 0.05″ LOC × 2-1/2″ OAL, 4 Flute, Carbide, AlTiN Nano, 0.01″ Corner Radius End Mill
Item #: GE90782562C6
Brand: Harvey Tool
Model #: 782562-C6
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Application | | Finishing | |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Corner Radius (RE) | 0.01″ |
| Depth of Cut Maximum (APMX) | 0.05″ |
| Neck Diameter (DN) | 0.06″ |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | 6D |
| Cutting Edge Material | Carbide |
| Flute Type | Spiral |
| Coating | AlTiN Nano |
| Body Material | Carbide |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.062″ |
| Flute Helix Angle (FHA) | 20 Degrees |
| Measurement Type | Inch |
| Shank Type | Round |
| Shank Size (SS) | 1/4″ |
| End Shape | Corner Radius |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.01″ |
| Usable Length (LU) | 3/8″ |
| Cutting Direction (HAND) | Right Hand |
| Applicable Material | | Hard Materials | |
| Single / Double End | Single End |
$ 79.74
1/16″ Cutting Dia. × 1/4″ Shank Size × 0.05″ LOC × 2-1/2″ OAL, 4 Flute, Carbide, AlTiN Nano, 0.01″ Corner Radius End Mill
Item #: GE90783762C6
Brand: Harvey Tool
Model #: 783762-C6
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Application | | Finishing | |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Corner Radius (RE) | 0.01″ |
| Depth of Cut Maximum (APMX) | 0.05″ |
| Neck Diameter (DN) | 0.06″ |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | 4D |
| Cutting Edge Material | Carbide |
| Flute Type | Spiral |
| Coating | AlTiN Nano |
| Body Material | Carbide |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.062″ |
| Flute Helix Angle (FHA) | 20 Degrees |
| Measurement Type | Inch |
| Shank Type | Round |
| Shank Size (SS) | 1/4″ |
| End Shape | Corner Radius |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.01″ |
| Usable Length (LU) | 1/4″ |
| Cutting Direction (HAND) | Right Hand |
| Applicable Material | | Hard Materials | |
| Single / Double End | Single End |
$ 74.84
1/2-13 GSF Style Thread Mill
Item #: ER4517029
Brand: EMUGE-FRANKEN
Model #: GF342101.5013
| Product Specifications | |
|---|---|
| Thread Size | 1/2″ |
| Coolant Supply Property (CSP) | Coolant Thru |
| Threads per Inch (TPI) | 13 |
| Shank Type | HB |
| Thread Diameter Size (TDZ) | 1/2″ |
| Coating | Bright |
| Thread Standard | | UNC | |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 14 mm |
| Usable Length (LU) | 32.3 mm |
| Overall Length (OAL) | 96 mm |
| Series/List # | A403324 |
| Flute Count (NOF) | 4 |
$ 696.48
1/2X5/8X2-1/2 6FL 0.030CR
Item #: HS1059927
Brand: Helical Solutions
Model #: 59927
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Stainless Steel | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Corner Radius (RE) | 0.03″ |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Length Group | 1D |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.5″ |
| Coating | TPLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 6 |
| Shank Length (LS) | 1.875″ |
$ 99.40
1/2X5/8X2-1/2 6FL 0.030CR A
Item #: HS1059320
Brand: Helical Solutions
Model #: 59320
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Corner Radius (RE) | 0.03″ |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Length Group | 1D |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.5″ |
| Coating | APLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 6 |
| Shank Length (LS) | 1.875″ |
$ 86.33
1/2X5/8X2-1/2 6FL 0.060CR
Item #: HS1059931
Brand: Helical Solutions
Model #: 59931
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Stainless Steel | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Corner Radius (RE) | 0.06″ |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Length Group | 1D |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.5″ |
| Coating | TPLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 6 |
| Shank Length (LS) | 1.875″ |
$ 100.78
1/2″ Cutting Dia. × 1/2″ Shank Size × 1-1/2″ LOC × 3″ OAL, 4 Flute, Carbide, AlTiN, 0.005″ Corner Chamfer End Mill
Item #: GE90805232C3
Brand: Harvey Tool
Model #: 805232-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Usable Length (LU) | 1-1/2″ |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Corner Chamfer Width (CHW) | 0.005″ |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Length Group | 3D |
| Overall Length (OAL) | 3″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | AlTiN |
| Decimal Equivalent | 0.5″ |
| Flute Count (NOF) | 4 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 30 Degrees |
| Shank Size (SS) | 1/2″ |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Corner Chamfer |
| Single / Double End | Single End |
$ 95.54
1/4X1/2X2-1/2 6FL 0.060CR
Item #: HS1081903
Brand: Helical Solutions
Model #: 81903
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Applicable Material | | Stainless Steel | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Corner Radius (RE) | 0.06″ |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Length Group | 2D |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.25″ |
| Coating | TPLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 6 |
| Shank Length (LS) | 2″ |
$ 54.95
1/4X1/2X2-1/2 6FL EM
Item #: HS1559251
Brand: Helical Solutions
Model #: 59251
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Flute Count (NOF) | 6 |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Length Group | 2D |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Decimal Equivalent | 0.25″ |
| Overall Length (OAL) | 2-1/2″ |
| Measurement Type | Inch |
| Coating | APLUS |
| Shank Length (LS) | 2″ |
$ 32.67
1/8X1/4X1-1/2 3FL 0.010CR
Item #: HS1081581
Brand: Helical Solutions
Model #: 81581
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.01″ |
| Depth of Cut Maximum (APMX) | 1/4″ |
| Length Group | 2D |
| Overall Length (OAL) | 1-1/2″ |
| Decimal Equivalent | 0.125″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 1.25″ |
$ 18.41
1/8X1/4X1-1/2 3FL 0.015CR
Item #: HS1059002
Brand: Helical Solutions
Model #: 59002
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.015″ |
| Depth of Cut Maximum (APMX) | 1/4″ |
| Length Group | 2D |
| Overall Length (OAL) | 1-1/2″ |
| Decimal Equivalent | 0.125″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 1.25″ |
$ 16.63
1/8X1/4X1-1/2 3FL 0.020CR
Item #: HS1059004
Brand: Helical Solutions
Model #: 59004
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.02″ |
| Depth of Cut Maximum (APMX) | 1/4″ |
| Length Group | 2D |
| Overall Length (OAL) | 1-1/2″ |
| Decimal Equivalent | 0.125″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 1.25″ |
$ 16.63
1/8″ Cutting Dia. × 1/8″ Shank Size × 3/16″ LOC × 2-1/2″ OAL, 3 Flute, Carbide, Uncoated, Square End Mill
Item #: GE90814208
Brand: Harvey Tool
Model #: 814208
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Neck Diameter (DN) | 0.121″ |
| Depth of Cut Maximum (APMX) | 3/16″ |
| Length Group | 6D |
| Overall Length (OAL) | 2-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | Uncoated |
| Decimal Equivalent | 0.125″ |
| Flute Count (NOF) | 3 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 42 Degrees |
| Shank Size (SS) | 1/8″ |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Square |
| Single / Double End | Single End |
| Usable Length (LU) | 3/4″ |
$ 50.58
1/8″ Dia. × 0.117″ LOC × 1/8″ Shank Size × 1-1/2″ OAL, 40 Degrees, Carbide, Uncoated, Chamfer Cutters
Item #: GE90844608
Brand: Harvey Tool
Model #: 844608
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.125″ |
| Coating | Uncoated |
| Usable Length (LU) | 0.117″ |
| Shank Type | Round |
| Flute Count (NOF) | 3 |
| End Shape | Flat |
| Flute Helix Angle (FHA) | 40 Degrees |
| Measurement Type | Inch |
| Depth of Cut Maximum (APMX) | 0.117″ |
| Series/List # | Specialty Profiles |
| Overall Length (OAL) | 1-1/2″ |
| Body Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 40 Degrees |
| Single / Double End | Single End |
$ 26.21
10″ × 0.063″ × 1-1/4″ Metallurgical Cut-Off Wheel Type 01 Straight 90 Grit
Item #: MH601017830
Brand: Norton Abrasives
Model #: 66253117830
| Product Specifications | |
|---|---|
| Diameter | 254 mm |
| Maximum RPM | 4,585 |
| Thickness | 1.6 mm |
| Bond Type | Resin |
| Arbor Hole | 32 mm |
| Hardness | H |
| Reinforced | Non-Reinforced |
| Specification | 8L10A |
| Grit | 90 |
| For Use With | Soft Steels (Rc 20-30) |
| Wheel Type | Type 41 |
| Type | Metallurgical Cut-Off Wheel |
| Abrasive Material | Aluminum Oxide |
| Hole Size | 32 mm |
$ 37.53