Products - (25001 Products)
CM75 CLAMPING FINGER CM75
Item #: WK221067614
Brand: Widia
Model #: 1067614
| Product Specifications | |
|---|---|
| N/A | |
Collet Chuck: 2.20 to 26.00 mm Capacity, ER Collet, 100.00 mm Shank Dia
Item #: 09489253
Brand: Techniks
Model #: 16289-195-CProduct Specifications
Collet System
ER
Collet Series
ER40
Taper Size
BT50
Projection (mm)
195.00
Through Coolant
Yes
Minimum Collet Capacity (mm)
2.20
Maximum Collet Capacity (mm)
26.00
Overall Length (mm)
236.8
Nose Diameter (Mm) ( - 2 Decimals)
63
Shank Diameter (mm)
100.00
Type
BT50
UNSPSC Code
27112808
Combination Wrench: 25.00 mm Head Size, 15 deg Offset
Item #: 03491735
Brand: EGA Master
Model #: 70189Product Specifications
Size (mm)
25.00
Finish
Plain
Head Type
Combination
Handle Type
Straight
Material
Beryllium Copper
Overall Length (mm)
270.00
Non-sparking
Yes
Tether Style
Not Tether Capable
Ratcheting
No
Reversing
No
Head Offset Angle
15
Opening Angle
15
Head Diameter (Decimal Inch)
1.4173
Standards
BAM Certified
Warranty
No Warranty
Number Of Points
12
UNSPSC Code
27111713
Coolant Hose Nozzles; Coolant Hose Nozzle Type: Nozzle; Nozzle Style: Flare; Nozzle Diameter (Fractional Inch): 1; Acid-resistant: No
Item #: 08869448
Brand: Cedarberg
Model #: 8525-251Product Specifications
Coolant Hose Nozzle Type
Nozzle
Nozzle Style
Flare
Nozzle Diameter (Fractional Inch)
1
Acid-resistant
No
Number Of Pieces
25
Color
Dark Gray
Hose Inside Diameter (Inch)
1/4
Thread Standard
Non-Threaded
For Use With
Snap-Loc System
Body Material
Delrin
Overall Length (Decimal Inch)
1.0000
UNSPSC Code
23271700
Corner Chamfer End Mill: 11.00 mm Dia, 31.00 mm LOC, 2 Flute, 0.10 mm Chamfer Width, Solid Carbide
Item #: 04843694
Brand: WNT
Model #: 5363111300Product Specifications
Mill Diameter (mm)
11.00
Number Of Flutes
2
Length of Cut (mm)
31.00
Single Or Double End
Single
End Mill Material
Solid Carbide
Coating/Finish
PCD
Centercutting
No
Flute Direction
Right Hand
Variable Index
No
Variable Helix
Yes
Cutting Direction
Right Hand
Chamfer Width (mm)
0.10
Overall Length (mm)
109.00
Coolant Through
No
Chipbreaker
No
Chamfer Angle
45.000
Length Type
Medium
Flute Type
Variable
Extended Reach
No
Shank Type
Straight-Cylindrical
Shank Diameter (mm)
12.00
Neck Diameter (mm)
10.600
UNSPSC Code
23241614
Series
53631
Corner Chamfer End Mill: 14.00 mm Dia, 18.00 mm LOC, 6 Flute, 0.06 mm Chamfer Width, Solid Carbide
Item #: 08857930
Brand: WNT
Model #: 5201114000Product Specifications
Mill Diameter (mm)
14.00
Number Of Flutes
6
Length of Cut (mm)
18.00
Single Or Double End
Single
End Mill Material
Solid Carbide
Coating/Finish
Bright/Uncoated
Centercutting
No
Flute Direction
Right Hand
Variable Index
No
Variable Helix
No
Cutting Direction
Right Hand
Chamfer Width (mm)
0.06
Overall Length (mm)
70.00
Coolant Through
No
Chipbreaker
No
Chamfer Angle
45.000
Length Type
Short
Flute Type
Spiral
Extended Reach
No
Shank Type
Weldon Flat
Shank Diameter (mm)
14.00
Neck Diameter (mm)
13.800
UNSPSC Code
23241614
Series
52011
Coating Classification
Uncoated
Corner Radius End Mill: 1" Dia, 1-1/2" LOC, 0.25 mm Radius, 3 Flute, Solid Carbide
Item #: 65102204
Brand: Cleveland
Model #: C61701Product Specifications
Mill Diameter (Inch)
1
Mill Diameter (Decimal Inch)
1.0000
Mill Diameter (mm)
25.40
Number Of Flutes
3
Length of Cut (mm)
38.10
Length of Cut (Inch)
1-1/2
Single Or Double End
Single
End Mill Material
Solid Carbide
Chipbreaker
No
Coating/Finish
Bright/Uncoated
Overall Length (Inch)
4
Centercutting
Yes
Flute Direction
Right Hand
Corner Radius (Decimal Inch)
0.0100
Variable Index
No
Variable Helix
No
Cutting Direction
Right Hand
Corner Radius (mm)
0.25
Overall Length (mm)
101.60
Coolant Through
No
Overall Length (Decimal Inch)
4.0000
End Type
Corner Radius
Length Of Cut (Decimal Inch - 4 Decimals)
1.5000
Length Type
Regular
Flute Type
Spiral
Extended Reach
No
Shank Type
Straight-Cylindrical
Material Removal Type
Finishing
Shank Diameter (Decimal Inch)
1.0000
Shank Diameter (Inch)
1
Shank Diameter (mm)
25.40
Primary Workpiece Material
Non-Ferrous Metal
UNSPSC Code
27112803
Primary Workpiece Material Code
N
Secondary Workpiece Material
Cast Iron; Steel
Secondary Workpiece Material Code
P; K
Material Grade
Submicron
Series
CEM-SE-3
Mill Diameter (Inch)
1
Mill Diameter (Decimal Inch)
1.0000
Mill Diameter (mm)
25.40
Number Of Flutes
3
Length of Cut (mm)
38.10
Length of Cut (Inch)
1-1/2
Single Or Double End
Single
End Mill Material
Solid Carbide
Chipbreaker
No
Coating/Finish
Bright/Uncoated
Overall Length (Inch)
4
Centercutting
Yes
Flute Direction
Right Hand
Corner Radius (Decimal Inch)
0.0100
Variable Index
No
Variable Helix
No
Cutting Direction
Right Hand
Corner Radius (mm)
0.25
Overall Length (mm)
101.60
Coolant Through
No
Overall Length (Decimal Inch)
4.0000
End Type
Corner Radius
Length Of Cut (Decimal Inch - 4 Decimals)
1.5000
Length Type
Regular
Flute Type
Spiral
Extended Reach
No
Shank Type
Straight-Cylindrical
Material Removal Type
Finishing
Shank Diameter (Decimal Inch)
1.0000
Shank Diameter (Inch)
1
Shank Diameter (mm)
25.40
Primary Workpiece Material
Non-Ferrous Metal
UNSPSC Code
27112803
Primary Workpiece Material Code
N
Secondary Workpiece Material
Cast Iron; Steel
Secondary Workpiece Material Code
P; K
Material Grade
Submicron
Series
CEM-SE-3
MSC Part #
65102204
Mfr Part #
C61701
Country of Origin Country of Origin is subject to change
UNITED STATES
Corner Radius End Mill: 4.00 mm Dia, 11.00 mm LOC, 0.30 mm Radius, 4 Flute, Solid Carbide
Item #: 04359303
Brand: WNT
Model #: 5406304003Product Specifications
Mill Diameter (mm)
4.00
Number Of Flutes
4
Length of Cut (mm)
11.0000
Single Or Double End
Single
End Mill Material
Solid Carbide
Coating/Finish
Ti1000
Centercutting
No
Flute Direction
Right Hand
Variable Index
No
Variable Helix
No
Cutting Direction
Right Hand
Corner Radius (mm)
0.30
Overall Length (mm)
57.0000
Coolant Through
No
Chipbreaker
No
End Type
Corner Radius
Flute Type
Spiral
Extended Reach
No
Shank Type
Weldon Flat
Shank Diameter (mm)
6.0000
Neck Diameter (mm)
3.800
UNSPSC Code
27112803
Series
54063
Corner Radius End Mill: 5.00 mm Dia, 13.00 mm LOC, 0.50 mm Radius, 4 Flute, Solid Carbide
Item #: 04511648
Brand: WNT
Model #: 5405305005Product Specifications
Mill Diameter (mm)
5.00
Number Of Flutes
4
Length of Cut (mm)
13.0000
Single Or Double End
Single
End Mill Material
Solid Carbide
Coating/Finish
Ti1000
Centercutting
No
Flute Direction
Right Hand
Variable Index
No
Variable Helix
No
Cutting Direction
Right Hand
Corner Radius (mm)
0.50
Overall Length (mm)
57.0000
Coolant Through
No
Chipbreaker
No
End Type
Corner Radius
Flute Type
Spiral
Extended Reach
No
Shank Type
Weldon Flat
Shank Diameter (mm)
6.0000
Neck Diameter (mm)
4.800
UNSPSC Code
27112803
Series
54053
Corner Radius End Mill: 5.00 mm Dia, 8.00 mm LOC, 0.30 mm Radius, 2 Flute, Solid Carbide
Item #: 04574737
Brand: WNT
Model #: 54594051Product Specifications
Mill Diameter (mm)
5.00
Number Of Flutes
2
Length of Cut (mm)
8.0000
Single Or Double End
Single
End Mill Material
Solid Carbide
Coating/Finish
Uncoated
Centercutting
No
Flute Direction
Right Hand
Variable Index
No
Variable Helix
Yes
Cutting Direction
Right Hand
Corner Radius (mm)
0.30
Overall Length (mm)
58.0000
Coolant Through
No
Chipbreaker
No
End Type
Corner Radius
Flute Type
Variable
Extended Reach
No
Shank Type
Straight-Cylindrical
Shank Diameter (mm)
6.0000
Neck Diameter (mm)
4.800
UNSPSC Code
27112803
Series
54594
Corner Radius End Mill: 6.00 mm Dia, 13.00 mm LOC, 0.50 mm Radius, 3 Flute, Solid Carbide
Item #: 04637021
Brand: WNT
Model #: 5371506105Product Specifications
Mill Diameter (mm)
6.00
Number Of Flutes
3
Length of Cut (mm)
13.0000
Single Or Double End
Single
End Mill Material
Solid Carbide
Coating/Finish
DLC
Centercutting
No
Flute Direction
Right Hand
Variable Index
No
Variable Helix
Yes
Cutting Direction
Right Hand
Corner Radius (mm)
0.50
Overall Length (mm)
58.0000
Coolant Through
No
Chipbreaker
No
End Type
Corner Radius
Flute Type
Variable
Extended Reach
No
Shank Type
Straight-Cylindrical
Shank Diameter (mm)
6.0000
Neck Diameter (mm)
5.700
UNSPSC Code
27112803
Series
53715
Corner Radius End Mill; 0.03″ Radius × 1/4″ Dia. × 1/2″ LOC × 1/4″ Shank Dia. × 2″ OAL, 4 Flutes, Carbide, AlTiN
Item #: TA15TC73920
Brand: Titan USA
Model #: TC73920
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Usable Length (LU) | 1/2″ |
| Overall Length (OAL) | 2″ |
| Decimal Equivalent | 0.25″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlTiN |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.03″ |
| Flute Count (NOF) | 4 |
| Center Cutting | Yes |
Corner Radius End Mill; 0.03″ Radius × 3/4″ Dia. × 1″ LOC × 3/4″ Shank Dia. × 3″ OAL, 4 Flutes, Carbide, Uncoated
Item #: TA15TC73876
Brand: Titan USA
Model #: TC73876
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1″ |
| Usable Length (LU) | 1″ |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.75″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Uncoated |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.03″ |
| Flute Count (NOF) | 4 |
| Center Cutting | Yes |
Corner Radius End Mill; 0.045″ Radius × 1/2″ Dia. × 1″ LOC × 1/2″ Shank Dia. × 4″ OAL, 4 Flutes, Carbide, Uncoated
Item #: TA15TC74335
Brand: Titan USA
Model #: TC74335
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1″ |
| Usable Length (LU) | 1″ |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.5″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Uncoated |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.045″ |
| Flute Count (NOF) | 4 |
| Center Cutting | Yes |
Corner Radius End Mill; 0.06″ Radius × 1/4″ Dia. × 1″ LOC × 1/4″ Shank Dia. × 4″ OAL, 4 Flutes, Carbide, Uncoated
Item #: TA15TC74316
Brand: Titan USA
Model #: TC74316
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1″ |
| Usable Length (LU) | 1″ |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.25″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Uncoated |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.06″ |
| Flute Count (NOF) | 4 |
| Center Cutting | Yes |
Corner Radius End Mill; 1/2″ Dia. × 1″ LOC × 1/2″ Shank Dia. × 3″ OAL ; 5 FL ; Carbide ; AlCr ; 0.06″ R
Item #: ER473902L050060
Brand: EMUGE-FRANKEN
Model #: 3902L.050060
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Flute Count (NOF) | 5 |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Shank Type | HA |
| Depth of Cut Maximum (APMX) | 1″ |
| End Shape | Corner Radius |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.5″ |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.06″ |
| Coating | AlCr |