Products - (25001 Products)
0.562″ Diameter × 5″ OAL, Stainless Steel, 83 Series Tube Brush
Item #: MJ7483S562
Brand: Brush Research
Model #: 83S562
| Product Specifications | |
|---|---|
| Type | 83 Series Tube Brush |
| Bristle Diameter | 0.006″ |
| Diameter | 0.562″ |
| Bore Diameter | 0.562″ |
| Stem Diameter | 0.190″ |
| Maximum RPM | 2,000 |
| Abrasive Material | Stainless Steel |
| Series | 83 Series Tube Brush |
| Overall Length | 5″ |
| Brush Diameter | 0.562″ |
$ 7.51
0.5937″ Steel Ball Tip on 4-48 Stem - Gage Ball Tips for Caliper Jaws
Item #: NB75Z6952
Brand: Procheck
Model #: NB75Z6952
| Product Specifications | |
|---|---|
| Type | Gage Ball Tip |
| Ball Material | Steel |
| For Use With | Caliper Jaw |
| Stem Size | 4-48 |
| Ball Diameter | 0.5937″ |
| Thread Size | #4-48 |
$ 14.20
0.5MM QUICK-SET TEST IND COMPLETE
Item #: MT80513-414-10T
Brand: Mitutoyo
Model #: 513-414-10T
| Product Specifications |
|---|
$ 245.75
0.5″ (1/2) Shank DIA × 60° Included Angle × 3″ (3) Overall Length × 0.08″ Tip DIA Carbide Tipped Off Chamfer Mill, 2 Flutes, AlTiN Coated
Item #: TA15TC87669
Brand: Titan USA
Model #: TC87669
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Point Angle (SIG) | 60 Degrees |
| Decimal Equivalent | 0.5″ |
| Cutting Edge Material | Carbide |
| Usable Length (LU) | 0.364″ |
| Coating | AlTiN |
| Flute Count (NOF) | 2 |
| End Shape | Flat |
| Depth of Cut Maximum (APMX) | 0.364″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 3″ |
| Measurement Type | Inch |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
$ 75.67
0.5″ Dia. × 0.5″ Shank × 0.625″ DOC × 4″ OAL, UN, 3 Flute, Ballnose End Mill
Item #: HS1047240
Brand: Helical Solutions
Model #: 47240
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Neck Diameter (DN) | 0.475″ |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Neck Length (LN) | 1.625″ |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Length Group | 1D |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.5″ |
| Coating | UN |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 1.75″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
$ 99.20
0.5″ Dia. × 0.5″ Shank × 0.625″ DOC × 6″ OAL, APLUS, 4 Flute, Ballnose End Mill
Item #: HS1057242
Brand: Helical Solutions
Model #: 57242
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Neck Diameter (DN) | 0.475″ |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Neck Length (LN) | 2.75″ |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Length Group | 1D |
| Overall Length (OAL) | 6″ |
| Decimal Equivalent | 0.5″ |
| Coating | APLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Shank Length (LS) | 2.625″ |
| Applicable Material | | Steel | |
$ 183.15
0.5″ Dia. × 0.5″ Shank × 0.625″ DOC × 6″ OAL, UN, 2 Flute, Ballnose End Mill
Item #: HS1018315
Brand: Helical Solutions
Model #: 18315
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Neck Diameter (DN) | 0.475″ |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Neck Length (LN) | 2.75″ |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Length Group | 1D |
| Overall Length (OAL) | 6″ |
| Decimal Equivalent | 0.5″ |
| Coating | UN |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Shank Length (LS) | 2.625″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
$ 106.72
0.5″ Dia. × 0.5″ Shank × 0.625″ DOC × 6″ OAL, UN, 3 Flute, Ballnose End Mill
Item #: HS1047270
Brand: Helical Solutions
Model #: 47270
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Neck Diameter (DN) | 0.475″ |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Neck Length (LN) | 3.625″ |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Length Group | 1D |
| Overall Length (OAL) | 6″ |
| Decimal Equivalent | 0.5″ |
| Coating | UN |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 1.75″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
$ 123.06
0.5″ Dia. × 0.5″ Shank × 0.625″ DOC × 6″ OAL, ZPLUS, 2 Flute, Ballnose End Mill
Item #: HS1018317
Brand: Helical Solutions
Model #: 18317
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Neck Diameter (DN) | 0.475″ |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Neck Length (LN) | 2.75″ |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Length Group | 1D |
| Overall Length (OAL) | 6″ |
| Decimal Equivalent | 0.5″ |
| Coating | ZPLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Shank Length (LS) | 2.625″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
$ 125.33
0.5″ Dia. × 0.5″ Shank × 0.625″ DOC × 6″ OAL, ZPLUS, 3 Flute, Ballnose End Mill
Item #: HS1047271
Brand: Helical Solutions
Model #: 47271
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Neck Diameter (DN) | 0.475″ |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Neck Length (LN) | 3.625″ |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Length Group | 1D |
| Overall Length (OAL) | 6″ |
| Decimal Equivalent | 0.5″ |
| Coating | ZPLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 1.75″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
$ 154.44
0.5″ Dia. × 0.5″ Shank × 1.25″ DOC × 3″ OAL, APLUS, 3 Flute, Ballnose End Mill
Item #: HS1012347
Brand: Helical Solutions
Model #: 12347
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Length Group | 2.5D |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Decimal Equivalent | 0.5″ |
| Overall Length (OAL) | 3″ |
| Measurement Type | Inch |
| Coating | APLUS |
| Shank Length (LS) | 1.75″ |
| Flute Count (NOF) | 3 |
$ 83.56
0.5″ Dia. × 0.5″ Shank × 1.25″ DOC × 3″ OAL, APLUS, 4 Flute, Ballnose End Mill
Item #: HS1056527
Brand: Helical Solutions
Model #: 56527
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Length Group | 2.5D |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Decimal Equivalent | 0.5″ |
| Overall Length (OAL) | 3″ |
| Measurement Type | Inch |
| Coating | APLUS |
| Shank Length (LS) | 1.75″ |
| Flute Count (NOF) | 4 |
$ 91.77
0.5″ Dia. × 0.5″ Shank × 1.25″ DOC × 3″ OAL, APLUS, 6 Flute, Ballnose End Mill
Item #: HS1059448
Brand: Helical Solutions
Model #: 59448
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Length Group | 2.5D |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Decimal Equivalent | 0.5″ |
| Overall Length (OAL) | 3″ |
| Measurement Type | Inch |
| Coating | APLUS |
| Shank Length (LS) | 1.75″ |
| Flute Count (NOF) | 6 |
$ 99.59
0.5″ Dia. × 0.5″ Shank × 1.25″ DOC × 3″ OAL, TPLUS, 6 Flute, Ballnose End Mill
Item #: HS1081933
Brand: Helical Solutions
Model #: 81933
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Stainless Steel | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Length Group | 2.5D |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Decimal Equivalent | 0.5″ |
| Overall Length (OAL) | 3″ |
| Measurement Type | Inch |
| Coating | TPLUS |
| Shank Length (LS) | 1.75″ |
| Flute Count (NOF) | 6 |
$ 115.04
0.5″ Dia. × 0.5″ Shank × 1.25″ DOC × 3″ OAL, UN, 2 Flute, Ballnose End Mill
Item #: HS1017465
Brand: Helical Solutions
Model #: 17465
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Length Group | 2.5D |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Decimal Equivalent | 0.5″ |
| Overall Length (OAL) | 3″ |
| Measurement Type | Inch |
| Coating | UN |
| Shank Length (LS) | 1.75″ |
| Flute Count (NOF) | 2 |
$ 60.49
0.5″ Dia. × 0.5″ Shank × 1.25″ DOC × 3″ OAL, UN, 3 Flute, Ballnose End Mill
Item #: HS1049285
Brand: Helical Solutions
Model #: 49285
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Length Group | 2.5D |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Decimal Equivalent | 0.5″ |
| Overall Length (OAL) | 3″ |
| Measurement Type | Inch |
| Coating | UN |
| Shank Length (LS) | 1.75″ |
| Flute Count (NOF) | 3 |
$ 81.38
0.5″ Dia. × 0.5″ Shank × 1.25″ DOC × 3″ OAL, ZPLUS, 2 Flute, Ballnose End Mill
Item #: HS1017467
Brand: Helical Solutions
Model #: 17467
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Length Group | 2.5D |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Decimal Equivalent | 0.5″ |
| Overall Length (OAL) | 3″ |
| Measurement Type | Inch |
| Coating | ZPLUS |
| Shank Length (LS) | 1.75″ |
| Flute Count (NOF) | 2 |
$ 73.46
0.5″ Dia. × 0.5″ Shank × 1.25″ DOC × 3″ OAL, ZPLUS, 3 Flute, Ballnose End Mill
Item #: HS1049286
Brand: Helical Solutions
Model #: 49286
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Length Group | 2.5D |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Decimal Equivalent | 0.5″ |
| Overall Length (OAL) | 3″ |
| Measurement Type | Inch |
| Coating | ZPLUS |
| Shank Length (LS) | 1.75″ |
| Flute Count (NOF) | 3 |
$ 96.53
0.5″ Dia. × 0.5″ Shank × 1.625″ DOC × 4″ OAL, APLUS, 4 Flute, Ballnose End Mill
Item #: HS1056542
Brand: Helical Solutions
Model #: 56542
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Length Group | 3D |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Decimal Equivalent | 0.5″ |
| Overall Length (OAL) | 4″ |
| Measurement Type | Inch |
| Coating | APLUS |
| Shank Length (LS) | 2.375″ |
| Flute Count (NOF) | 4 |
$ 109.59
0.5″ Dia. × 0.5″ Shank × 1.625″ DOC × 4″ OAL, APLUS, 6 Flute, Ballnose End Mill
Item #: HS1059449
Brand: Helical Solutions
Model #: 59449
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Length Group | 3D |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Decimal Equivalent | 0.5″ |
| Overall Length (OAL) | 4″ |
| Measurement Type | Inch |
| Coating | APLUS |
| Shank Length (LS) | 2.375″ |
| Flute Count (NOF) | 6 |
$ 122.17