Products - (25001 Products)
450-475MM 0.01MM OUTSIDE MICROMETER
Item #: MT80103-155
Brand: Mitutoyo
Model #: 103-155
Product Specifications
Type
Mechanical
Model No
103-155
Minimum Measurement
450 mm
Measuring Range
450 mm-475 mm
Maximum Measurement
475 mm
Country of Origin
JP
Package Weight
2.0000
475-500MM 0.01MM INSIDE MICROMETER
Item #: MT80133-160
Brand: Mitutoyo
Model #: 133-160
Product Specifications
Type
Mechanical
Model No
133-160
Minimum Measurement
475 mm
Measuring Range
475 mm-500 mm
Maximum Measurement
500 mm
Micrometer Type
Inside
Country of Origin
JP
Package Weight
2.0000
475-500MM 0.01MM OUTSIDE MICROMETER
Item #: MT80103-156
Brand: Mitutoyo
Model #: 103-156
| Product Specifications | |
|---|---|
| Type | Mechanical |
| Model No | 103-156 |
| Minimum Measurement | 475 mm |
| Measuring Range | 475 mm-500 mm |
| Maximum Measurement | 500 mm |
48-52″ OUTSIDE MICROMETER
Item #: MT80105-430
Brand: Mitutoyo
Model #: 105-430
| Product Specifications | |
|---|---|
| Type | Mechanical |
| Thimble Type | Ratchet |
| Minimum Measurement | 48″ |
| Model No | 105-430 |
| Maximum Measurement | 52″ |
| Measuring Range | 48-52″ |
| Graduation | 0.001″ |
4PC 0-100MM 0.01MM DIG OD MIC SET
Item #: MT80193-902
Brand: Mitutoyo
Model #: 193-902
| Product Specifications | |
|---|---|
| Type | Mechanical |
| Model No | 193-902 |
| Minimum Measurement | 0 mm |
| Measuring Range | 0 mm-100 mm |
| Maximum Measurement | 100 mm |
4PC 0-100MM DIG OUTSIDE MIC SET
Item #: MT80193-916
Brand: Mitutoyo
Model #: 193-916
| Product Specifications | |
|---|---|
| Type | Mechanical |
| Model No | 193-916 |
| Minimum Measurement | 0 mm |
| Measuring Range | 0 mm-100 mm |
| Maximum Measurement | 100 mm |
5-100MM SPERICAL FACE MICROMETER
Item #: MT80115-218
Brand: Mitutoyo
Model #: 115-218
| Product Specifications | |
|---|---|
| Type | Mechanical |
| Model No | 115-218 |
| Minimum Measurement | 5 mm |
| Measuring Range | 5 mm-100 mm |
| Maximum Measurement | 100 mm |
5-25MM V-ANVIL MICROMETER
Item #: MT80114-121
Brand: Mitutoyo
Model #: 114-121
| Product Specifications | |
|---|---|
| Type | Mechanical |
| Model No | 114-121 |
| Minimum Measurement | 5 mm |
| Measuring Range | 5 mm-25 mm |
| Maximum Measurement | 25 mm |
5-25MM V-ANVIL MICROMETER
Item #: MT80114-165
Brand: Mitutoyo
Model #: 114-165
| Product Specifications | |
|---|---|
| Type | Mechanical |
| Model No | 114-165 |
| Minimum Measurement | 5 mm |
| Measuring Range | 5 mm-25 mm |
| Maximum Measurement | 25 mm |
5-30MM 0.001MM INSIDE CALIPER MIC
Item #: MT80345-250-30
Brand: Mitutoyo
Model #: 345-250-30
| Product Specifications | |
|---|---|
| Type | Digimatic |
| Model No | 345-250-30 |
| Minimum Measurement | 5 mm |
| Measuring Range | 5 mm-30 mm |
| Maximum Measurement | 30 mm |
| Micrometer Type | Inside |
| Graduation | 0.001 mm |
5-6″ .0001/0.001MM MM MIC
Item #: MT80293-351-30
Brand: Mitutoyo
Model #: 293-351-30
| Product Specifications | |
|---|---|
| Type | Digimatic |
| Thimble Type | Ratchet |
| Minimum Measurement | 5″ |
| Finish/Coating | Enamel |
| Maximum Measurement | 6″ |
| Model No | 293-351-30 |
| Graduation | 0.0001″ |
| Measuring Range | 5″-6″ |
| Accuracy | ± 0.0001″ |
5-6″ INSIDE MICROMETER
Item #: MT80133-226
Brand: Mitutoyo
Model #: 133-226
Product Specifications
Type
Mechanical
Model No
133-226
Minimum Measurement
0″
Measuring Range
0″-6″
Maximum Measurement
6″
Micrometer Type
Inside
Country of Origin
USA
Package Weight
.5480
5-6″ SCREW THREAD MICROMETER
Item #: MT80126-142
Brand: Mitutoyo
Model #: 126-142
| Product Specifications | |
|---|---|
| Type | Mechanical |
| Thimble Type | Ratchet |
| Minimum Measurement | 5″ |
| Finish/Coating | Enamel |
| Maximum Measurement | 6″ |
| Model No | 126-142 |
| Graduation | 0.001″ |
| Measuring Range | 5″-6″ |
| Accuracy | ± 0.00025″ |
5/16-4FL-SE-REG
Item #: MW21206001150
Brand: Monster Tool Company
Model #: 206-001150
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Application | | Slotting | Profiling | Rampdown | |
| Depth of Cut Maximum (APMX) | 13/16″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.3125″ |
| Coating | Bright |
| Series/List # | 206 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
5/16-4FL-SE-REG TiN
Item #: MW21206001151
Brand: Monster Tool Company
Model #: 206-001151
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Application | | Slotting | Profiling | Rampdown | |
| Depth of Cut Maximum (APMX) | 13/16″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.3125″ |
| Coating | TiN |
| Series/List # | 206 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
5/16″ Dia. × 1-1/8″ LOC × 5/16″ Shank Dia. × 3″ OAL, 4 Flute, Carbide, AlCrN, Corner Radius End Mill
Item #: KE11976000239
Brand: Keo
Model #: 976-000-239
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-1/8″ |
| Length Group | Long |
| Overall Length (OAL) | 3″ |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlCrN |
| Center Cutting | Yes |
| Flute Count (NOF) | 4 |
5/16″ Dia. × 1-1/8″ LOC × 5/16″ Shank Dia. × 3″ OAL, 4 Flute, Carbide, AlCrN, Corner Radius End Mill
Item #: KE11976000240
Brand: Keo
Model #: 976-000-240
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-1/8″ |
| Length Group | Long |
| Overall Length (OAL) | 3″ |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlCrN |
| Center Cutting | Yes |
| Flute Count (NOF) | 4 |
5/16″ Dia. × 1-1/8″ LOC × 5/16″ Shank Dia. × 3″ OAL, 5 Flute, Carbide, AlCrN, Corner Radius End Mill
Item #: KE11976000388
Brand: Keo
Model #: 976-000-388
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-1/8″ |
| Length Group | Long |
| Overall Length (OAL) | 3″ |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlCrN |
| Center Cutting | Yes |
| Flute Count (NOF) | 5 |
5/16″ Dia. × 1-1/8″ LOC × 5/16″ Shank Dia. × 3″ OAL, 5 Flute, Carbide, AlCrN, Corner Radius End Mill
Item #: KE11976000387
Brand: Keo
Model #: 976-000-387
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-1/8″ |
| Length Group | Long |
| Overall Length (OAL) | 3″ |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlCrN |
| Center Cutting | Yes |
| Flute Count (NOF) | 5 |
5/16″ Dia. × 1-1/8″ LOC × 5/16″ Shank Dia. × 3″ OAL, 5 Flute, Carbide, AlCrN, Square End Mill
Item #: KE11976000080
Brand: Keo
Model #: 976-000-080
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 1-1/8″ |
| Length Group | Long |
| Overall Length (OAL) | 3″ |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlCrN |
| Center Cutting | Yes |
| Flute Count (NOF) | 5 |