Products - (25001 Products)
DCGT32.52CB KP300
Item #: IC035402912
Brand: Ingersoll
Model #: 5402912
| Product Specifications | |
|---|---|
| Insert Style | DCGT |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Corner Radius (RE) | 0.031″ |
| Grade | KP300 |
| Insert Size | 32.52 |
| Fixing Hole Diameter (D1) | 0.173″ |
| Cutting Edge Length (L) | 0.173″ |
| Measurement Type | Inch |
| Insert Thickness (S) | 0.156″ |
| Body Material | Carbide |
DCGT32.52FL K10
Item #: IC065513041
Brand: Ingersoll
Model #: 5513041
| Product Specifications | |
|---|---|
| Insert Style | DCGT |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Corner Radius (RE) | 0.031″ |
| Grade | K10 |
| Insert Size | 32.52 |
| Fixing Hole Diameter (D1) | 0.173″ |
| Cutting Edge Length (L) | 0.425″ |
| Measurement Type | Inch |
| Insert Thickness (S) | 0.156″ |
| Body Material | Carbide |
DCGT32.52L-T1500A Turning Insert
Item #: FJ0110JT709
Brand: Sumitomo
Model #: 10JT709
| Product Specifications | |
|---|---|
| Applicable Material | Cast Iron|Stainless Steel|Exotic Alloys|Hardened Steel|Steel|Non-Ferrous Material |
| Grade | T1500A |
| Insert Style | DCGT |
| Tool Type | Turning Insert |
| Corner Radius (RE) | 0.031″ |
| Fixing Hole Diameter (D1) | 0.173″ |
| Insert Size | 32.52 |
| Clearance Angle Major (AN) | 7 Degrees |
| Insert Thickness (S) | 0.016″ |
| Number of Cutting Edges | 4 |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | W|None |
| Cutting Edge Material | Cermet |
| Shape | 55° Diamond |
DCGT32.52MEFM-T1500A Turning Insert
Item #: FJ0110JTANA
Brand: Sumitomo
Model #: 10JTANA
| Product Specifications | |
|---|---|
| Applicable Material | Cast Iron|Stainless Steel|Exotic Alloys|Hardened Steel|Steel|Non-Ferrous Material |
| Grade | T1500A |
| Insert Style | DCGT |
| Tool Type | Turning Insert |
| Corner Radius (RE) | 0.031″ |
| Fixing Hole Diameter (D1) | 0.173″ |
| Insert Size | 32.52 |
| Clearance Angle Major (AN) | 7 Degrees |
| Insert Thickness (S) | 0.016″ |
| Number of Cutting Edges | 4 |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | EFM |
| Cutting Edge Material | Cermet |
| Shape | 55° Diamond |
DCGT32.52MEFM-T1500Z Turning Insert
Item #: FJ01104AANA
Brand: Sumitomo
Model #: 104AANA
| Product Specifications | |
|---|---|
| Applicable Material | Cast Iron|Stainless Steel|Exotic Alloys|Hardened Steel|Steel|Non-Ferrous Material |
| Grade | T1500Z |
| Insert Style | DCGT |
| Tool Type | Turning Insert |
| Corner Radius (RE) | 0.031″ |
| Fixing Hole Diameter (D1) | 0.173″ |
| Insert Size | 32.52 |
| Clearance Angle Major (AN) | 7 Degrees |
| Insert Thickness (S) | 0.016″ |
| Number of Cutting Edges | 4 |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | EFM |
| Cutting Edge Material | Cermet |
| Shape | 55° Diamond |
DCGT32.52MESI-AC510U Turning Insert
Item #: FJ011NHV014
Brand: Sumitomo
Model #: 1NHV014
| Product Specifications | |
|---|---|
| Applicable Material | Cast Iron|Stainless Steel|Exotic Alloys|Hardened Steel|Steel|Non-Ferrous Material |
| Grade | AC510U |
| Insert Style | DCGT |
| Tool Type | Turning Insert |
| Corner Radius (RE) | 0.031″ |
| Fixing Hole Diameter (D1) | 0.173″ |
| Insert Size | 32.52 |
| Clearance Angle Major (AN) | 7 Degrees |
| Insert Thickness (S) | 0.016″ |
| Number of Cutting Edges | 4 |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | ESI |
| Cutting Edge Material | Carbide |
| Shape | 55° Diamond |
DCGT32.52MESI-AC520U Turning Insert
Item #: FJ011NHW014
Brand: Sumitomo
Model #: 1NHW014
Product Specifications
Applicable Material
Cast Iron|Exotic Alloys|Stainless Steel|Hardened Steel|Steel|Non-Ferrous Material
Grade
AC520U
Insert Style
DCGT
Tool Type
Turning Insert
Corner Radius (RE)
0.031″
Fixing Hole Diameter (D1)
0.173″
Insert Size
32.52
Clearance Angle Major (AN)
7 Degrees
Insert Thickness (S)
0.016″
Number of Cutting Edges
4
Inscribed Circle Diameter (IC)
3/8″
Chip Breaker Type
ESI
Cutting Edge Material
Carbide
Shape
55° Diamond
Country of Origin
JAPAN
Package Weight
0.12
DCGT32.52MESI-AC520U Turning Insert
Item #: FJ011NHW014
Brand: Sumitomo
Model #: 1NHW014
| Product Specifications | |
|---|---|
| Applicable Material | Cast Iron|Exotic Alloys|Stainless Steel|Hardened Steel|Steel|Non-Ferrous Material |
| Grade | AC520U |
| Insert Style | DCGT |
| Tool Type | Turning Insert |
| Corner Radius (RE) | 0.031″ |
| Fixing Hole Diameter (D1) | 0.173″ |
| Insert Size | 32.52 |
| Clearance Angle Major (AN) | 7 Degrees |
| Insert Thickness (S) | 0.016″ |
| Number of Cutting Edges | 4 |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | ESI |
| Cutting Edge Material | Carbide |
| Shape | 55° Diamond |
DCGT32.52MESI-AC530U Turning Insert
Item #: FJ011NHM014
Brand: Sumitomo
Model #: 1NHM014
Product Specifications
Applicable Material
Cast Iron|Stainless Steel|Exotic Alloys|Hardened Steel|Steel|Non-Ferrous Material
Grade
AC530U
Insert Style
DCGT
Tool Type
Turning Insert
Corner Radius (RE)
0.031″
Fixing Hole Diameter (D1)
0.173″
Insert Size
32.52
Clearance Angle Major (AN)
7 Degrees
Insert Thickness (S)
0.016″
Number of Cutting Edges
4
Inscribed Circle Diameter (IC)
3/8″
Chip Breaker Type
ESI
Cutting Edge Material
Carbide
Shape
55° Diamond
Country of Origin
JAPAN
Package Weight
0.12
DCGT32.52MESI-AC530U Turning Insert
Item #: FJ011NHM014
Brand: Sumitomo
Model #: 1NHM014
| Product Specifications | |
|---|---|
| Applicable Material | Cast Iron|Stainless Steel|Exotic Alloys|Hardened Steel|Steel|Non-Ferrous Material |
| Grade | AC530U |
| Insert Style | DCGT |
| Tool Type | Turning Insert |
| Corner Radius (RE) | 0.031″ |
| Fixing Hole Diameter (D1) | 0.173″ |
| Insert Size | 32.52 |
| Clearance Angle Major (AN) | 7 Degrees |
| Insert Thickness (S) | 0.016″ |
| Number of Cutting Edges | 4 |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | ESI |
| Cutting Edge Material | Carbide |
| Shape | 55° Diamond |
DCGT32.52MESI-AC6030M Turning Insert
Item #: FJ011N6C014
Brand: Sumitomo
Model #: 1N6C014
| Product Specifications | |
|---|---|
| Applicable Material | Cast Iron|Stainless Steel|Exotic Alloys|Hardened Steel|Steel|Non-Ferrous Material |
| Grade | AC6030M |
| Insert Style | DCGT |
| Tool Type | Turning Insert |
| Corner Radius (RE) | 0.031″ |
| Fixing Hole Diameter (D1) | 0.173″ |
| Insert Size | 32.52 |
| Clearance Angle Major (AN) | 7 Degrees |
| Insert Thickness (S) | 0.016″ |
| Number of Cutting Edges | 4 |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | ESI |
| Cutting Edge Material | Carbide |
| Shape | 55° Diamond |
DCGT32.52MESI-AC610M Turning Insert
Item #: FJ011NPV014
Brand: Sumitomo
Model #: 1NPV014
| Product Specifications | |
|---|---|
| Applicable Material | Stainless Steel|Cast Iron|Exotic Alloys|Hardened Steel|Steel|Non-Ferrous Material |
| Grade | AC610M |
| Insert Style | DCGT |
| Tool Type | Turning Insert |
| Corner Radius (RE) | 0.031″ |
| Fixing Hole Diameter (D1) | 0.173″ |
| Insert Size | 32.52 |
| Clearance Angle Major (AN) | 7 Degrees |
| Insert Thickness (S) | 0.016″ |
| Number of Cutting Edges | 4 |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | ESI |
| Cutting Edge Material | Carbide |
| Shape | 55° Diamond |
DCGT32.52MESI-T1500A Turning Insert
Item #: FJ011NJT014
Brand: Sumitomo
Model #: 1NJT014
Product Specifications
Applicable Material
Cast Iron|Exotic Alloys|Stainless Steel|Hardened Steel|Steel|Non-Ferrous Material
Grade
T1500A
Insert Style
DCGT
Tool Type
Turning Insert
Corner Radius (RE)
0.031″
Fixing Hole Diameter (D1)
0.173″
Insert Size
32.52
Clearance Angle Major (AN)
7 Degrees
Insert Thickness (S)
0.016″
Number of Cutting Edges
4
Inscribed Circle Diameter (IC)
3/8″
Chip Breaker Type
ESI
Cutting Edge Material
Cermet
Shape
55° Diamond
Country of Origin
JAPAN
Package Weight
0.1
DCGT32.52MESI-T1500A Turning Insert
Item #: FJ011NJT014
Brand: Sumitomo
Model #: 1NJT014
| Product Specifications | |
|---|---|
| Applicable Material | Cast Iron|Exotic Alloys|Stainless Steel|Hardened Steel|Steel|Non-Ferrous Material |
| Grade | T1500A |
| Insert Style | DCGT |
| Tool Type | Turning Insert |
| Corner Radius (RE) | 0.031″ |
| Fixing Hole Diameter (D1) | 0.173″ |
| Insert Size | 32.52 |
| Clearance Angle Major (AN) | 7 Degrees |
| Insert Thickness (S) | 0.016″ |
| Number of Cutting Edges | 4 |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | ESI |
| Cutting Edge Material | Cermet |
| Shape | 55° Diamond |
DCGT32.52MESI-T1500Z Turning Insert
Item #: FJ011N4A014
Brand: Sumitomo
Model #: 1N4A014
| Product Specifications | |
|---|---|
| Applicable Material | Cast Iron|Stainless Steel|Exotic Alloys|Hardened Steel|Steel|Non-Ferrous Material |
| Grade | T1500Z |
| Insert Style | DCGT |
| Tool Type | Turning Insert |
| Corner Radius (RE) | 0.031″ |
| Fixing Hole Diameter (D1) | 0.173″ |
| Insert Size | 32.52 |
| Clearance Angle Major (AN) | 7 Degrees |
| Insert Thickness (S) | 0.016″ |
| Number of Cutting Edges | 4 |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | ESI |
| Cutting Edge Material | Cermet |
| Shape | 55° Diamond |
DCGT32.52NAG H1, 0.031″ Corner Radius, 0.016″ Thick, 3/8″ Inscribed Circle, Uncoated, 55 Degree Diamond, Turning Insert
Item #: FJ011033364
Brand: Sumitomo
Model #: 1033364
| Product Specifications | |
|---|---|
| Applicable Material | Stainless Steel|Cast Iron|Exotic Alloys|Hardened Steel|Steel|Non-Ferrous Material |
| Grade | H1 |
| Insert Style | DCGT |
| Tool Type | Turning Insert |
| Corner Radius (RE) | 0.031″ |
| Fixing Hole Diameter (D1) | 0.173″ |
| Insert Size | 32.52 |
| Clearance Angle Major (AN) | 7 Degrees |
| Insert Thickness (S) | 0.016″ |
| Number of Cutting Edges | 4 |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | NAG |
| Cutting Edge Material | Carbide |
| Shape | 55° Diamond |
| Coating | Uncoated |
DCGT32.52R-T1200A Turning Insert
Item #: FJ0110CA708
Brand: Sumitomo
Model #: 10CA708
Product Specifications
Applicable Material
Exotic Alloys|Cast Iron|Hardened Steel|Non-Ferrous Material|Steel|Stainless Steel
Grade
T1200A
Insert Style
DCGT
Tool Type
Turning Insert
Corner Radius (RE)
0.031″
Fixing Hole Diameter (D1)
0.173″
Insert Size
32.52
Clearance Angle Major (AN)
7 Degrees
Insert Thickness (S)
0.016″
Number of Cutting Edges
4
Inscribed Circle Diameter (IC)
3/8″
Chip Breaker Type
W|None
Cutting Edge Material
Cermet
Shape
55° Diamond
Country of Origin
JAPAN
Package Weight
0.1
DCGT32.52R-T1500A Turning Insert
Item #: FJ0110JT708
Brand: Sumitomo
Model #: 10JT708
Product Specifications
Applicable Material
Cast Iron|Exotic Alloys|Stainless Steel|Hardened Steel|Steel|Non-Ferrous Material
Grade
T1500A
Insert Style
DCGT
Tool Type
Turning Insert
Corner Radius (RE)
0.031″
Fixing Hole Diameter (D1)
0.173″
Insert Size
32.52
Clearance Angle Major (AN)
7 Degrees
Insert Thickness (S)
0.016″
Number of Cutting Edges
4
Inscribed Circle Diameter (IC)
3/8″
Chip Breaker Type
W|None
Cutting Edge Material
Cermet
Shape
55° Diamond
Country of Origin
JAPAN
Package Weight
0.1
DCGT32.52R-T1500A Turning Insert
Item #: FJ0110JT708
Brand: Sumitomo
Model #: 10JT708
| Product Specifications | |
|---|---|
| Applicable Material | Cast Iron|Exotic Alloys|Stainless Steel|Hardened Steel|Steel|Non-Ferrous Material |
| Grade | T1500A |
| Insert Style | DCGT |
| Tool Type | Turning Insert |
| Corner Radius (RE) | 0.031″ |
| Fixing Hole Diameter (D1) | 0.173″ |
| Insert Size | 32.52 |
| Clearance Angle Major (AN) | 7 Degrees |
| Insert Thickness (S) | 0.016″ |
| Number of Cutting Edges | 4 |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | W|None |
| Cutting Edge Material | Cermet |
| Shape | 55° Diamond |
DCGT32.52SA TT5080
Item #: IC066132364
Brand: Ingersoll
Model #: 6132364
| Product Specifications | |
|---|---|
| Insert Style | DCGT |
| Fixing Hole Diameter (D1) | 0.173″ |
| Corner Radius (RE) | 0.031″ |
| Min D.O.C. | 0.008″ |
| Insert Size | 32.52 |
| Depth of Cut Maximum (APMX) | 1/8″ |
| Cutting Edge Length (L) | 0.425″ |
| Min. Turning Feed (ft(min)) | 0.003″ |
| Insert Thickness (S) | 0.156″ |
| Max. Turning Feed (ft(max)) | 0.001″ |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Measurement Type | Inch |
| Coating | TiAlN+AlTiN+TiAlN+TiN |
| Body Material | Carbide |
| Grade | TT5080 |