Products - (25001 Products)
2QP-VBGW 222 BXA10
Item #: TG306792168
Brand: Tungaloy
Model #: 6792168
Product Specifications
Applicable Material
| Hard Materials |
Min D.O.C.
0.002″
Application
| Inserts |
Depth of Cut Maximum (APMX)
0.0197″
Corner Radius (RE)
0.031″
Min. Turning Feed (ft(min))
0.0012 ″/rev
Cutting Edge Length (L)
0.441″
Max. Turning Feed (ft(max))
0.0098 ″/rev
Insert Thickness (S)
1/8″
Clearance Angle Major (AN)
5 Degrees
Inscribed Circle Diameter (IC)
1/4″
Cutting Direction (HAND)
Neutral
Grade
BXA10
Chip Breaker Type
FT
Tool Type
Turn Ultra hard Inserts
Measurement Type
Inch
Fixing Hole Diameter (D1)
0.11″
Body Material
Carbide
Family Description
Positive 5deg relief ang., M/G class, 35deg rhombic CBN insert
Remarks
The last letter of designation means as below. F: Sharp edge L: Edge preparation for reducing flank wear LF: Edge preparation for reducing burrs LC: Edge preparation for reducing crater wear H: Edge preparation for reducing fracture W, WL, WJ, WG: Wiper
Country of Origin
Japan
www.P65Warnings.ca.gov
$ 92.29
2QP-VBGW 222 BXA10
Item #: TG306792168
Brand: Tungaloy
Model #: 6792168
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.11″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.031″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 222 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.441″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 1/8″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 1/4″ |
| Chip Breaker Type | FT-CBN |
| Grade | BXA10 |
| Measurement Type | Inch |
| Tool Type | Turn Ultra hard Inserts |
| Body Material | Carbide |
$ 101.43
2QP-VBGW 222-L BXA10
Item #: TG306792219
Brand: Tungaloy
Model #: 6792219
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.11″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.031″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 222 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.441″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 1/8″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 1/4″ |
| Chip Breaker Type | L-CBN |
| Grade | BXA10 |
| Measurement Type | Inch |
| Tool Type | Turn Ultra hard Inserts |
| Body Material | Carbide |
$ 101.43
2QP-VBGW 222-L BXA20
Item #: TG306790996
Brand: Tungaloy
Model #: 6790996
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.11″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.031″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 222 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.441″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 1/8″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 1/4″ |
| Chip Breaker Type | L-CBN |
| Cutting Edge Material | PCBN |
| Measurement Type | Inch |
| Grade | BXA20 |
| Body Material | Carbide |
| Tool Type | Turn Ultra hard Inserts |
$ 101.43
2QP-VBGW 222-LC BXA10
Item #: TG306792261
Brand: Tungaloy
Model #: 6792261
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.11″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.031″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 222 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.441″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 1/8″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 1/4″ |
| Chip Breaker Type | LC-CBN |
| Grade | BXA10 |
| Measurement Type | Inch |
| Tool Type | Turn Ultra hard Inserts |
| Body Material | Carbide |
$ 101.43
2QP-VBGW 222-LC BXA20
Item #: TG306791036
Brand: Tungaloy
Model #: 6791036
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.11″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.031″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 222 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.441″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 1/8″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 1/4″ |
| Chip Breaker Type | LC-CBN |
| Cutting Edge Material | PCBN |
| Measurement Type | Inch |
| Grade | BXA20 |
| Body Material | Carbide |
| Tool Type | Turn Ultra hard Inserts |
$ 101.43
2QP-VBGW 222-LF BXA10
Item #: TG306792240
Brand: Tungaloy
Model #: 6792240
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.11″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.031″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 222 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.441″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 1/8″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 1/4″ |
| Chip Breaker Type | LF-CBN |
| Grade | BXA10 |
| Measurement Type | Inch |
| Tool Type | Turn Ultra hard Inserts |
| Body Material | Carbide |
$ 101.43
2QP-VBGW 222-LF BXA20
Item #: TG306791010
Brand: Tungaloy
Model #: 6791010
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.11″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.031″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 222 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.441″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 1/8″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 1/4″ |
| Chip Breaker Type | LF-CBN |
| Cutting Edge Material | PCBN |
| Measurement Type | Inch |
| Grade | BXA20 |
| Body Material | Carbide |
| Tool Type | Turn Ultra hard Inserts |
$ 101.43
2QP-VBGW 330.5 BXA10
Item #: TG306792169
Brand: Tungaloy
Model #: 6792169
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.173″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.008″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 330.5 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.654″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 0.187″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | FT-CBN |
| Grade | BXA10 |
| Measurement Type | Inch |
| Tool Type | Turn Ultra hard Inserts |
| Body Material | Carbide |
$ 101.43
2QP-VBGW 330.5 BXA20
Item #: TG306791082
Brand: Tungaloy
Model #: 6791082
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.173″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.008″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 330.5 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.654″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 0.187″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | FT-CBN |
| Cutting Edge Material | PCBN |
| Measurement Type | Inch |
| Grade | BXA20 |
| Body Material | Carbide |
| Tool Type | Turn Ultra hard Inserts |
$ 101.43
2QP-VBGW 330.5-H BXA20
Item #: TG306791103
Brand: Tungaloy
Model #: 6791103
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.173″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.008″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 330.5 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.654″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 0.187″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | H-CBN |
| Cutting Edge Material | PCBN |
| Measurement Type | Inch |
| Grade | BXA20 |
| Body Material | Carbide |
| Tool Type | Turn Ultra hard Inserts |
$ 101.43
2QP-VBGW 330.5-L BXA10
Item #: TG306792220
Brand: Tungaloy
Model #: 6792220
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.173″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.008″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 330.5 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.654″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 0.187″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | L-CBN |
| Grade | BXA10 |
| Measurement Type | Inch |
| Tool Type | Turn Ultra hard Inserts |
| Body Material | Carbide |
$ 101.43
2QP-VBGW 330.5-L BXA20
Item #: TG306791091
Brand: Tungaloy
Model #: 6791091
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.173″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.008″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 330.5 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.654″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 0.187″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | L-CBN |
| Cutting Edge Material | PCBN |
| Measurement Type | Inch |
| Grade | BXA20 |
| Body Material | Carbide |
| Tool Type | Turn Ultra hard Inserts |
$ 101.43
2QP-VBGW 330.5-LC BXA10
Item #: TG306792262
Brand: Tungaloy
Model #: 6792262
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.173″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.008″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 330.5 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.654″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 0.187″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | LC-CBN |
| Grade | BXA10 |
| Measurement Type | Inch |
| Tool Type | Turn Ultra hard Inserts |
| Body Material | Carbide |
$ 101.43
2QP-VBGW 330.5-LC BXA20
Item #: TG306791111
Brand: Tungaloy
Model #: 6791111
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.173″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.008″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 330.5 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.654″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 0.187″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | LC-CBN |
| Cutting Edge Material | PCBN |
| Measurement Type | Inch |
| Grade | BXA20 |
| Body Material | Carbide |
| Tool Type | Turn Ultra hard Inserts |
$ 101.43
2QP-VBGW 330.5-LF BXA10
Item #: TG306792241
Brand: Tungaloy
Model #: 6792241
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.173″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.008″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 330.5 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.654″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 0.187″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | LF-CBN |
| Grade | BXA10 |
| Measurement Type | Inch |
| Tool Type | Turn Ultra hard Inserts |
| Body Material | Carbide |
$ 101.43
2QP-VBGW 330.5-LF BXA20
Item #: TG306791098
Brand: Tungaloy
Model #: 6791098
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.173″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.008″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 330.5 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.654″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 0.187″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | LF-CBN |
| Cutting Edge Material | PCBN |
| Measurement Type | Inch |
| Grade | BXA20 |
| Body Material | Carbide |
| Tool Type | Turn Ultra hard Inserts |
$ 101.43
2QP-VBGW 331 BXA10
Item #: TG306786107
Brand: Tungaloy
Model #: 6786107
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.173″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.016″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 331 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.654″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 0.187″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | FT-CBN |
| Grade | BXA10 |
| Measurement Type | Inch |
| Tool Type | Turn Ultra hard Inserts |
| Body Material | Carbide |
$ 101.43
2QP-VBGW 331-H BXA20
Item #: TG306791021
Brand: Tungaloy
Model #: 6791021
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.173″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.016″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 331 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.654″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 0.187″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | H-CBN |
| Cutting Edge Material | PCBN |
| Measurement Type | Inch |
| Grade | BXA20 |
| Body Material | Carbide |
| Tool Type | Turn Ultra hard Inserts |
$ 101.43
2QP-VBGW 331-L BXA10
Item #: TG306792221
Brand: Tungaloy
Model #: 6792221
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.173″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | VBGW |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.016″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 331 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.654″ |
| Clearance Angle Major (AN) | 5 Degrees |
| Insert Thickness (S) | 0.187″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Chip Breaker Type | L-CBN |
| Grade | BXA10 |
| Measurement Type | Inch |
| Tool Type | Turn Ultra hard Inserts |
| Body Material | Carbide |
$ 101.43