Products - (25001 Products)
3QP-TPGW32.52 BXA40
Item #: TG306853450
Brand: Tungaloy
Model #: 6853450
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Tool Type | Turn Ultra hard Inserts |
| Application | | Inserts | |
| Fixing Hole Diameter (D1) | 0.173″ |
| Insert Style | TPGW |
| Min D.O.C. | 0.002″ |
| Corner Radius (RE) | 0.031″ |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Insert Size | 32.52 |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Cutting Edge Length (L) | 0.65″ |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Insert Thickness (S) | 0.156″ |
| Clearance Angle Major (AN) | 11 Degrees |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Cutting Direction (HAND) | Neutral |
| Cutting Edge Material | PCBN |
| Chip Breaker Type | FT-CBN |
| Coating | TiAlN |
| Measurement Type | Inch |
| Grade | BXA40 |
| Body Material | Carbide |
3QP-TPGW331 BXA30
Item #: TG306853456
Brand: Tungaloy
Model #: 6853456
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Tool Type | Turn Ultra hard Inserts |
| Application | | Inserts | |
| Fixing Hole Diameter (D1) | 0.173″ |
| Insert Style | TPGW |
| Min D.O.C. | 0.002″ |
| Corner Radius (RE) | 0.016″ |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Insert Size | 331 |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Cutting Edge Length (L) | 0.65″ |
| Max. Turning Feed (ft(max)) | 0.0079 ″/rev |
| Insert Thickness (S) | 0.187″ |
| Clearance Angle Major (AN) | 11 Degrees |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Cutting Direction (HAND) | Neutral |
| Cutting Edge Material | PCBN |
| Chip Breaker Type | FT-CBN |
| Coating | TiAlN |
| Measurement Type | Inch |
| Grade | BXA30 |
| Body Material | Carbide |
3QP-TPGW331 BXA40
Item #: TG306853451
Brand: Tungaloy
Model #: 6853451
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Tool Type | Turn Ultra hard Inserts |
| Application | | Inserts | |
| Fixing Hole Diameter (D1) | 0.173″ |
| Insert Style | TPGW |
| Min D.O.C. | 0.002″ |
| Corner Radius (RE) | 0.016″ |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Insert Size | 331 |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Cutting Edge Length (L) | 0.65″ |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Insert Thickness (S) | 0.187″ |
| Clearance Angle Major (AN) | 11 Degrees |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Cutting Direction (HAND) | Neutral |
| Cutting Edge Material | PCBN |
| Chip Breaker Type | FT-CBN |
| Coating | TiAlN |
| Measurement Type | Inch |
| Grade | BXA40 |
| Body Material | Carbide |
3QP-TPGW332 BXA30
Item #: TG306853457
Brand: Tungaloy
Model #: 6853457
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Tool Type | Turn Ultra hard Inserts |
| Application | | Inserts | |
| Fixing Hole Diameter (D1) | 0.173″ |
| Insert Style | TPGW |
| Min D.O.C. | 0.002″ |
| Corner Radius (RE) | 0.031″ |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Insert Size | 332 |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Cutting Edge Length (L) | 0.65″ |
| Max. Turning Feed (ft(max)) | 0.0079 ″/rev |
| Insert Thickness (S) | 0.187″ |
| Clearance Angle Major (AN) | 11 Degrees |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Cutting Direction (HAND) | Neutral |
| Cutting Edge Material | PCBN |
| Chip Breaker Type | FT-CBN |
| Coating | TiAlN |
| Measurement Type | Inch |
| Grade | BXA30 |
| Body Material | Carbide |
3QP-TPGW332 BXA40
Item #: TG306853477
Brand: Tungaloy
Model #: 6853477
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Tool Type | Turn Ultra hard Inserts |
| Application | | Inserts | |
| Fixing Hole Diameter (D1) | 0.173″ |
| Insert Style | TPGW |
| Min D.O.C. | 0.002″ |
| Corner Radius (RE) | 0.031″ |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Insert Size | 332 |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Cutting Edge Length (L) | 0.65″ |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Insert Thickness (S) | 0.187″ |
| Clearance Angle Major (AN) | 11 Degrees |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Cutting Direction (HAND) | Neutral |
| Cutting Edge Material | PCBN |
| Chip Breaker Type | FT-CBN |
| Coating | TiAlN |
| Measurement Type | Inch |
| Grade | BXA40 |
| Body Material | Carbide |
3QP-TPGW631 BXA30
Item #: TG306853504
Brand: Tungaloy
Model #: 6853504
Product Specifications
Applicable Material
| Hard Materials |
Fixing Hole Diameter (D1)
0.091″
Application
| Inserts |
Min D.O.C.
0.002″
Insert Style
TPGW
Depth of Cut Maximum (APMX)
0.0197″
Corner Radius (RE)
0.016″
Min. Turning Feed (ft(min))
0.0012 ″/rev
Cutting Edge Length (L)
0.323″
Max. Turning Feed (ft(max))
0.0079 ″/rev
Insert Thickness (S)
0.094″
Clearance Angle Major (AN)
11 Degrees
Inscribed Circle Diameter (IC)
0.187″
Cutting Direction (HAND)
Neutral
Cutting Edge Material
PCBN
Chip Breaker Type
FT
Coating
TiAlN
Measurement Type
Inch
Grade
BXA30
Body Material
Carbide
Tool Type
Turn Ultra hard Inserts
Family Description
Positive 11deg relief ang., M/G class, triangular CBN insert
Remarks
The last letter of designation means as below. F: Sharp edge L: Edge preparation for reducing flank wear LF: Edge preparation for reducing burrs LC: Edge preparation for reducing crater wear H: Edge preparation for reducing fracture W, WL, WJ, WG: Wiper
Country of Origin
Japan
www.P65Warnings.ca.gov
3QP-TPGW631 BXA30
Item #: TG306853504
Brand: Tungaloy
Model #: 6853504
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Tool Type | Turn Ultra hard Inserts |
| Application | | Inserts | |
| Fixing Hole Diameter (D1) | 0.091″ |
| Insert Style | TPGW |
| Min D.O.C. | 0.002″ |
| Corner Radius (RE) | 0.016″ |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Insert Size | 631 |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Cutting Edge Length (L) | 0.323″ |
| Max. Turning Feed (ft(max)) | 0.0079 ″/rev |
| Insert Thickness (S) | 0.094″ |
| Clearance Angle Major (AN) | 11 Degrees |
| Inscribed Circle Diameter (IC) | 0.187″ |
| Cutting Direction (HAND) | Neutral |
| Cutting Edge Material | PCBN |
| Chip Breaker Type | FT-CBN |
| Coating | TiAlN |
| Measurement Type | Inch |
| Grade | BXA30 |
| Body Material | Carbide |
3QP-TPGW631 BXA40
Item #: TG306853439
Brand: Tungaloy
Model #: 6853439
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Tool Type | Turn Ultra hard Inserts |
| Application | | Inserts | |
| Fixing Hole Diameter (D1) | 0.091″ |
| Insert Style | TPGW |
| Min D.O.C. | 0.002″ |
| Corner Radius (RE) | 0.016″ |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Insert Size | 631 |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Cutting Edge Length (L) | 0.323″ |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Insert Thickness (S) | 0.094″ |
| Clearance Angle Major (AN) | 11 Degrees |
| Inscribed Circle Diameter (IC) | 0.187″ |
| Cutting Direction (HAND) | Neutral |
| Cutting Edge Material | PCBN |
| Chip Breaker Type | FT-CBN |
| Coating | TiAlN |
| Measurement Type | Inch |
| Grade | BXA40 |
| Body Material | Carbide |
3QP-TPGW730.5 BXA30
Item #: TG306853505
Brand: Tungaloy
Model #: 6853505
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Tool Type | Turn Ultra hard Inserts |
| Application | | Inserts | |
| Fixing Hole Diameter (D1) | 0.098″ |
| Insert Style | TPGW |
| Min D.O.C. | 0.002″ |
| Corner Radius (RE) | 0.008″ |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Insert Size | 730.5 |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Cutting Edge Length (L) | 0.378″ |
| Max. Turning Feed (ft(max)) | 0.0079 ″/rev |
| Insert Thickness (S) | 0.094″ |
| Clearance Angle Major (AN) | 11 Degrees |
| Inscribed Circle Diameter (IC) | 0.219″ |
| Cutting Direction (HAND) | Neutral |
| Cutting Edge Material | PCBN |
| Chip Breaker Type | FT-CBN |
| Coating | TiAlN |
| Measurement Type | Inch |
| Grade | BXA30 |
| Body Material | Carbide |
3QP-TPGW730.5 BXA40
Item #: TG306853440
Brand: Tungaloy
Model #: 6853440
Product Specifications
Applicable Material
| Hard Materials |
Fixing Hole Diameter (D1)
0.098″
Application
| Inserts |
Min D.O.C.
0.002″
Insert Style
TPGW
Depth of Cut Maximum (APMX)
0.0197″
Corner Radius (RE)
0.008″
Min. Turning Feed (ft(min))
0.0012 ″/rev
Cutting Edge Length (L)
0.378″
Max. Turning Feed (ft(max))
0.0098 ″/rev
Insert Thickness (S)
0.094″
Clearance Angle Major (AN)
11 Degrees
Inscribed Circle Diameter (IC)
0.219″
Cutting Direction (HAND)
Neutral
Cutting Edge Material
PCBN
Chip Breaker Type
FT
Coating
TiAlN
Measurement Type
Inch
Grade
BXA40
Body Material
Carbide
Tool Type
Turn Ultra hard Inserts
Family Description
Positive 11deg relief ang., M/G class, triangular CBN insert
Remarks
The last letter of designation means as below. F: Sharp edge L: Edge preparation for reducing flank wear LF: Edge preparation for reducing burrs LC: Edge preparation for reducing crater wear H: Edge preparation for reducing fracture W, WL, WJ, WG: Wiper
Country of Origin
Japan
www.P65Warnings.ca.gov
3QP-TPGW730.5 BXA40
Item #: TG306853440
Brand: Tungaloy
Model #: 6853440
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Tool Type | Turn Ultra hard Inserts |
| Application | | Inserts | |
| Fixing Hole Diameter (D1) | 0.098″ |
| Insert Style | TPGW |
| Min D.O.C. | 0.002″ |
| Corner Radius (RE) | 0.008″ |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Insert Size | 730.5 |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Cutting Edge Length (L) | 0.378″ |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Insert Thickness (S) | 0.094″ |
| Clearance Angle Major (AN) | 11 Degrees |
| Inscribed Circle Diameter (IC) | 0.219″ |
| Cutting Direction (HAND) | Neutral |
| Cutting Edge Material | PCBN |
| Chip Breaker Type | FT-CBN |
| Coating | TiAlN |
| Measurement Type | Inch |
| Grade | BXA40 |
| Body Material | Carbide |
3QP-TPGW731 BXA30
Item #: TG306853506
Brand: Tungaloy
Model #: 6853506
Product Specifications
Applicable Material
| Hard Materials |
Fixing Hole Diameter (D1)
0.098″
Application
| Inserts |
Min D.O.C.
0.002″
Insert Style
TPGW
Depth of Cut Maximum (APMX)
0.0197″
Corner Radius (RE)
0.016″
Min. Turning Feed (ft(min))
0.0012 ″/rev
Cutting Edge Length (L)
0.378″
Max. Turning Feed (ft(max))
0.0079 ″/rev
Insert Thickness (S)
0.094″
Clearance Angle Major (AN)
11 Degrees
Inscribed Circle Diameter (IC)
0.219″
Cutting Direction (HAND)
Neutral
Cutting Edge Material
PCBN
Chip Breaker Type
FT
Coating
TiAlN
Measurement Type
Inch
Grade
BXA30
Body Material
Carbide
Tool Type
Turn Ultra hard Inserts
Family Description
Positive 11deg relief ang., M/G class, triangular CBN insert
Remarks
The last letter of designation means as below. F: Sharp edge L: Edge preparation for reducing flank wear LF: Edge preparation for reducing burrs LC: Edge preparation for reducing crater wear H: Edge preparation for reducing fracture W, WL, WJ, WG: Wiper
Country of Origin
Japan
www.P65Warnings.ca.gov
3QP-TPGW731 BXA30
Item #: TG306853506
Brand: Tungaloy
Model #: 6853506
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Tool Type | Turn Ultra hard Inserts |
| Application | | Inserts | |
| Fixing Hole Diameter (D1) | 0.098″ |
| Insert Style | TPGW |
| Min D.O.C. | 0.002″ |
| Corner Radius (RE) | 0.016″ |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Insert Size | 731 |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Cutting Edge Length (L) | 0.378″ |
| Max. Turning Feed (ft(max)) | 0.0079 ″/rev |
| Insert Thickness (S) | 0.094″ |
| Clearance Angle Major (AN) | 11 Degrees |
| Inscribed Circle Diameter (IC) | 0.219″ |
| Cutting Direction (HAND) | Neutral |
| Cutting Edge Material | PCBN |
| Chip Breaker Type | FT-CBN |
| Coating | TiAlN |
| Measurement Type | Inch |
| Grade | BXA30 |
| Body Material | Carbide |
3QP-TPGW731 BXA40
Item #: TG306853441
Brand: Tungaloy
Model #: 6853441
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Tool Type | Turn Ultra hard Inserts |
| Application | | Inserts | |
| Fixing Hole Diameter (D1) | 0.098″ |
| Insert Style | TPGW |
| Min D.O.C. | 0.002″ |
| Corner Radius (RE) | 0.016″ |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Insert Size | 731 |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Cutting Edge Length (L) | 0.378″ |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Insert Thickness (S) | 0.094″ |
| Clearance Angle Major (AN) | 11 Degrees |
| Inscribed Circle Diameter (IC) | 0.219″ |
| Cutting Direction (HAND) | Neutral |
| Cutting Edge Material | PCBN |
| Chip Breaker Type | FT-CBN |
| Coating | TiAlN |
| Measurement Type | Inch |
| Grade | BXA40 |
| Body Material | Carbide |
3QP-TPMW 32.51 BX950
Item #: TG306822418
Brand: Tungaloy
Model #: 6822418
| Product Specifications | |
|---|---|
| Applicable Material | Cast Iron |Hi Temp Alloys | |
| Tool Type | Turn Ultra hard Inserts |
| Application | | Boring Bars Round Shank | Boring Bars Square Shank | Cartridges | Digital Fine Boring Head | Posi,F style, 91deg Approach | Posi,U style, 95deg Approach | Top Borer Tools | |
| Fixing Hole Diameter (D1) | 0.173″ |
| Insert Style | TPMW |
| Min D.O.C. | 0.002″ |
| Corner Radius (RE) | 0.016″ |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Insert Size | 32.51 |
| Min. Turning Feed (ft(min)) | 0.002 ″/rev |
| Cutting Edge Length (L) | 0.65″ |
| Max. Turning Feed (ft(max)) | 0.0118 ″/rev |
| Insert Thickness (S) | 0.156″ |
| Clearance Angle Major (AN) | 11 Degrees |
| Inscribed Circle Diameter (IC) | 3/8″ |
| Cutting Direction (HAND) | Neutral |
| Cutting Edge Material | PCBN |
| Measurement Type | Inch |
| Grade | BX950 |
| Body Material | Carbide |
3QP-WNGA 431 BXA10
Item #: TG306792051
Brand: Tungaloy
Model #: 6792051
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.203″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | WNGA |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.016″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 431 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.343″ |
| Cutting Direction (HAND) | Neutral |
| Insert Thickness (S) | 0.187″ |
| Chip Breaker Type | FT-CBN |
| Inscribed Circle Diameter (IC) | 1/2″ |
| Measurement Type | Inch |
| Grade | BXA10 |
| Body Material | Carbide |
| Tool Type | Turn Negative Inserts |
3QP-WNGA 431 BXA20
Item #: TG306790883
Brand: Tungaloy
Model #: 6790883
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Tool Type | Turn Negative Inserts |
| Application | | Inserts | |
| Fixing Hole Diameter (D1) | 0.203″ |
| Insert Style | WNGA |
| Min D.O.C. | 0.002″ |
| Corner Radius (RE) | 0.016″ |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Insert Size | 431 |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Cutting Edge Length (L) | 0.343″ |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Insert Thickness (S) | 0.187″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 1/2″ |
| Chip Breaker Type | FT-CBN |
| Cutting Edge Material | PCBN |
| Measurement Type | Inch |
| Grade | BXA20 |
| Body Material | Carbide |
3QP-WNGA 432 BXA10
Item #: TG306786092
Brand: Tungaloy
Model #: 6786092
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.203″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | WNGA |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.031″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 432 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.343″ |
| Cutting Direction (HAND) | Neutral |
| Insert Thickness (S) | 0.187″ |
| Chip Breaker Type | FT-CBN |
| Inscribed Circle Diameter (IC) | 1/2″ |
| Measurement Type | Inch |
| Grade | BXA10 |
| Body Material | Carbide |
| Tool Type | Turn Negative Inserts |
3QP-WNGA 432-H BXA10
Item #: TG306792622
Brand: Tungaloy
Model #: 6792622
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Fixing Hole Diameter (D1) | 0.203″ |
| Application | | Inserts | |
| Min D.O.C. | 0.002″ |
| Insert Style | WNGA |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Corner Radius (RE) | 0.031″ |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Insert Size | 432 |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Cutting Edge Length (L) | 0.343″ |
| Cutting Direction (HAND) | Neutral |
| Insert Thickness (S) | 0.187″ |
| Chip Breaker Type | H-CBN |
| Inscribed Circle Diameter (IC) | 1/2″ |
| Measurement Type | Inch |
| Grade | BXA10 |
| Body Material | Carbide |
| Tool Type | Turn Negative Inserts |
3QP-WNGA 432-H BXA20
Item #: TG306760071
Brand: Tungaloy
Model #: 6760071
| Product Specifications | |
|---|---|
| Applicable Material | | Hard Materials | |
| Tool Type | Turn Negative Inserts |
| Application | | Inserts | |
| Fixing Hole Diameter (D1) | 0.203″ |
| Insert Style | WNGA |
| Min D.O.C. | 0.002″ |
| Corner Radius (RE) | 0.031″ |
| Depth of Cut Maximum (APMX) | 0.0197″ |
| Insert Size | 432 |
| Min. Turning Feed (ft(min)) | 0.0012 ″/rev |
| Cutting Edge Length (L) | 0.343″ |
| Max. Turning Feed (ft(max)) | 0.0098 ″/rev |
| Insert Thickness (S) | 0.187″ |
| Cutting Direction (HAND) | Neutral |
| Inscribed Circle Diameter (IC) | 1/2″ |
| Chip Breaker Type | H-CBN |
| Cutting Edge Material | PCBN |
| Measurement Type | Inch |
| Grade | BXA20 |
| Body Material | Carbide |