Products - (25001 Products)
D24UDWLNR4 Boring Bar
Item #: FJ112000W5W
Brand: Sumitomo
Model #: 2000W5W
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 1-1/2″ |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 12″ |
| Rake Angle | 14 Degrees |
Deburring Wheel: 5" Dia, 1/4" Face Width, 1/2" Hole, Aluminum Oxide
Item #: 59627299
Brand: Rex Cut Abrasives
Model #: 190117Product Specifications
Wheel Diameter (Inch)
5
Face Width (Inch)
1/4
Center Hole Size (Inch)
1/2
Abrasive Material
Aluminum Oxide
Grade
Medium
Wheel Type
Type 1
Attachment Type
Arbor Hole
Maximum Rpm
10850.000
Tooling Compatibility
Bench Grinder; Bench Grinders
Density Grade
Hard
UNSPSC Code
31191600
Wheel Diameter (Inch)
5
Face Width (Inch)
1/4
Center Hole Size (Inch)
1/2
Abrasive Material
Aluminum Oxide
Grade
Medium
Wheel Type
Type 1
Attachment Type
Arbor Hole
Maximum Rpm
10850.000
Tooling Compatibility
Bench Grinder; Bench Grinders
Density Grade
Hard
UNSPSC Code
31191600
MSC Part #
59627299
Mfr Part #
190117
Country of Origin Country of Origin is subject to change
UNITED STATES
E04H-SWLOL1.2 BAR
Item #: MB0362024679
Brand: Mitsubishi Materials USA
Model #: 62024679
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Cutting Direction (HAND) | Left Hand |
| Functional Length (LF) | 4″ |
| Frontal Edge Angle | 95 Degrees |
| Shank Height (H) | 0.235″ |
| Rake Angle Radial (GAMF) | 17 Degrees |
| Functional Width (WF) | 0.156″ |
| Series/List # | E-SWLO_C_INCH |
| Minimum Bore Diameter (DMIN) | 0.313″ |
| Measurement Type | Inch |
E04H-SWLOR1.2 HOLDER
Item #: MB0362024686
Brand: Mitsubishi Materials USA
Model #: 62024686
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 4″ |
| Frontal Edge Angle | 95 Degrees |
| Shank Height (H) | 0.235″ |
| Rake Angle Radial (GAMF) | 17 Degrees |
| Functional Width (WF) | 0.156″ |
| Series/List # | E-SWLO_C_INCH |
| Minimum Bore Diameter (DMIN) | 0.313″ |
| Measurement Type | Inch |
E05K-SCLCL2 BAR
Item #: MB0362024693
Brand: Mitsubishi Materials USA
Model #: 62024693
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 0.313″ |
| Cutting Direction (HAND) | Left Hand |
| Functional Length (LF) | 5″ |
| Frontal Edge Angle | 95 Degrees |
| Shank Height (H) | 0.295″ |
| Rake Angle Radial (GAMF) | 15 Degrees |
| Functional Width (WF) | 0.219″ |
| Series/List # | E-SCLC_C_INCH |
| Minimum Bore Diameter (DMIN) | 0.385″ |
| Measurement Type | Inch |
E05K-SCLCR2 BAR
Item #: MB0362024709
Brand: Mitsubishi Materials USA
Model #: 62024709
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 0.313″ |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 5″ |
| Frontal Edge Angle | 95 Degrees |
| Shank Height (H) | 0.295″ |
| Rake Angle Radial (GAMF) | 15 Degrees |
| Functional Width (WF) | 0.219″ |
| Series/List # | E-SCLC_C_INCH |
| Minimum Bore Diameter (DMIN) | 0.385″ |
| Measurement Type | Inch |
E05K-STUPL1.5 BAR
Item #: MB0362024716
Brand: Mitsubishi Materials USA
Model #: 62024716
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 0.313″ |
| Cutting Direction (HAND) | Left Hand |
| Functional Length (LF) | 5″ |
| Frontal Edge Angle | 93 Degrees |
| Shank Height (H) | 0.295″ |
| Rake Angle Radial (GAMF) | 10 Degrees |
| Functional Width (WF) | 0.196″ |
| Series/List # | E-STUP_C_INCH |
| Minimum Bore Diameter (DMIN) | 0.402″ |
| Measurement Type | Inch |
E05K-STUPR1.5 BAR
Item #: MB0362024723
Brand: Mitsubishi Materials USA
Model #: 62024723
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 0.313″ |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 5″ |
| Frontal Edge Angle | 93 Degrees |
| Shank Height (H) | 0.295″ |
| Rake Angle Radial (GAMF) | 10 Degrees |
| Functional Width (WF) | 0.196″ |
| Series/List # | E-STUP_C_INCH |
| Minimum Bore Diameter (DMIN) | 0.402″ |
| Measurement Type | Inch |
E05K-SWLOL2 BAR
Item #: MB0362024730
Brand: Mitsubishi Materials USA
Model #: 62024730
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 0.313″ |
| Cutting Direction (HAND) | Left Hand |
| Functional Length (LF) | 5″ |
| Frontal Edge Angle | 95 Degrees |
| Shank Height (H) | 0.295″ |
| Rake Angle Radial (GAMF) | 15 Degrees |
| Functional Width (WF) | 0.203″ |
| Series/List # | E-SWLO_C_INCH |
| Minimum Bore Diameter (DMIN) | 0.406″ |
| Measurement Type | Inch |
E05K-SWLOR2 BAR
Item #: MB0362024747
Brand: Mitsubishi Materials USA
Model #: 62024747
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 0.313″ |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 5″ |
| Frontal Edge Angle | 95 Degrees |
| Shank Height (H) | 0.295″ |
| Rake Angle Radial (GAMF) | 15 Degrees |
| Functional Width (WF) | 0.203″ |
| Series/List # | E-SWLO_C_INCH |
| Minimum Bore Diameter (DMIN) | 0.406″ |
| Measurement Type | Inch |
E05KSCLPL18 WG BORING BAR
Item #: WK535092924
Brand: Widia
Model #: 5092924
Product Specifications
Overall Length (OAL)
4.95″
Cutting Direction (HAND)
Left Hand
Reduced Body Diameter Length (LDRED)
0.76″
Shank Type
Round
Master Insert Identification (MIID)
Diamond 80
Body Material
Carbide
Minimum Bore Diameter (DMIN)
0.415″
Country of Origin
DE
Package Weight
.1631
E05KSCLPL18 WG BORING BAR
Item #: WK535092924
Brand: Widia
Model #: 5092924
| Product Specifications | |
|---|---|
| Overall Length (OAL) | 4.95″ |
| Cutting Direction (HAND) | Left Hand |
| Reduced Body Diameter Length (LDRED) | 0.76″ |
| Shank Type | Round |
| Master Insert Identification (MIID) | Diamond 80 |
| Body Material | Carbide |
| Minimum Bore Diameter (DMIN) | 0.415″ |
E05KSTFPL18 WG BORING BAR
Item #: WK535093680
Brand: Widia
Model #: 5093680
| Product Specifications | |
|---|---|
| Overall Length (OAL) | 5″ |
| Cutting Direction (HAND) | Left Hand |
| Reduced Body Diameter Length (LDRED) | 0.81″ |
| Shank Type | Round |
| Master Insert Identification (MIID) | Triangle 60 |
| Body Material | Carbide |
| Minimum Bore Diameter (DMIN) | 0.415″ |
E05M-SWLOL1.2 BAR
Item #: MB0362024754
Brand: Mitsubishi Materials USA
Model #: 62024754
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 0.313″ |
| Cutting Direction (HAND) | Left Hand |
| Functional Length (LF) | 6″ |
| Frontal Edge Angle | 95 Degrees |
| Shank Height (H) | 0.295″ |
| Rake Angle Radial (GAMF) | 15 Degrees |
| Functional Width (WF) | 0.188″ |
| Series/List # | E-SWLO_C_INCH |
| Minimum Bore Diameter (DMIN) | 3/8″ |
| Measurement Type | Inch |
E05M-SWLOL1.5 BAR
Item #: MB0362024761
Brand: Mitsubishi Materials USA
Model #: 62024761
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 0.313″ |
| Cutting Direction (HAND) | Left Hand |
| Functional Length (LF) | 6″ |
| Frontal Edge Angle | 95 Degrees |
| Shank Height (H) | 0.295″ |
| Rake Angle Radial (GAMF) | 15 Degrees |
| Functional Width (WF) | 0.188″ |
| Series/List # | E-SWLO_C_INCH |
| Minimum Bore Diameter (DMIN) | 3/8″ |
| Measurement Type | Inch |
E05M-SWLOR1.2 BAR
Item #: MB0362024778
Brand: Mitsubishi Materials USA
Model #: 62024778
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 0.313″ |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 6″ |
| Frontal Edge Angle | 95 Degrees |
| Shank Height (H) | 0.295″ |
| Rake Angle Radial (GAMF) | 15 Degrees |
| Functional Width (WF) | 0.188″ |
| Series/List # | E-SWLO_C_INCH |
| Minimum Bore Diameter (DMIN) | 3/8″ |
| Measurement Type | Inch |
E05M-SWLOR1.5 BAR
Item #: MB0362024785
Brand: Mitsubishi Materials USA
Model #: 62024785
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 0.313″ |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 6″ |
| Frontal Edge Angle | 95 Degrees |
| Shank Height (H) | 0.295″ |
| Rake Angle Radial (GAMF) | 15 Degrees |
| Functional Width (WF) | 0.188″ |
| Series/List # | E-SWLO_C_INCH |
| Minimum Bore Diameter (DMIN) | 3/8″ |
| Measurement Type | Inch |
E05STFPL1.8 Boring Bar
Item #: FJ11U102018
Brand: Sumitomo
Model #: U102018
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Coolant Supply Property (CSP) | Coolant Thru |
| Overall Length (OAL) | 5″ |
| Frontal Edge Angle | 0 Degrees |
| Minimum Bore Diameter (DMIN) | 0.415″ |
| Tool Type | Fixed Head|Boring Bars-Coolant Thru |
| Cutting Direction (HAND) | Left Hand |
| Body Material | Carbide |
E05STFPR1.8 Boring Bar
Item #: FJ11U101806
Brand: Sumitomo
Model #: U101806
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Coolant Supply Property (CSP) | Coolant Thru |
| Overall Length (OAL) | 5″ |
| Frontal Edge Angle | 0 Degrees |
| Minimum Bore Diameter (DMIN) | 0.415″ |
| Tool Type | Fixed Head|Boring Bars-Coolant Thru |
| Cutting Direction (HAND) | Right Hand |
| Body Material | Carbide |
E06DSTFPR2A WG BORING BAR
Item #: WK535093689
Brand: Widia
Model #: 5093689
| Product Specifications | |
|---|---|
| Overall Length (OAL) | 5.879″ |
| Cutting Direction (HAND) | Right Hand |
| Reduced Body Diameter Length (LDRED) | 0.85″ |
| Shank Type | Round |
| Master Insert Identification (MIID) | Triangle 60 |
| Body Material | Carbide |
| Minimum Bore Diameter (DMIN) | 0.48″ |