Email: sales@exacttooling.com
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

Products - (25001 Products)

Kennametal - 1/4" Diam, 1-1/2" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 4" OAL, 1/4" Shank Diam, Use on Composites, Fiberglass - Exact Tooling

Kennametal - 1/4" Diam, 1-1/2" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 4" OAL, 1/4" Shank Diam, Use on Composites, Fiberglass


Item #: 46880548
Brand: Kennametal
Model #: 4137460
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 6.35
Cutting Diameter (Inch) 1/4
Cutting Diameter (Decimal Inch) 0.2500
End Type Burr
Length of Cut (Decimal Inch) 1.5000
Length of Cut (Inch) 1-1/2
Shank Diameter (mm) 6.35
Shank Diameter (Inch) 1/4
Overall Length (Inch) 4
Material Solid Carbide
Finish/Coating Diamond
Material Application Composites; Fiberglass
Cutting Direction Right Hand
Shank Length (Decimal Inch) 2.3340

$ 287.89
Kennametal - 1/4" Diam, 3/4" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-1/2" OAL, 1/4" Shank Diam, Use on Composites, Fiberglass - Exact Tooling

Kennametal - 1/4" Diam, 3/4" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-1/2" OAL, 1/4" Shank Diam, Use on Composites, Fiberglass


Item #: 46880365
Brand: Kennametal
Model #: 4137493
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 6.35
Cutting Diameter (Inch) 1/4
Cutting Diameter (Decimal Inch) 0.2500
End Type Burr
Length of Cut (Decimal Inch) 0.7500
Length of Cut (Inch) 3/4
Shank Diameter (mm) 6.35
Shank Diameter (Inch) 1/4
Overall Length (Inch) 2-1/2
Material Solid Carbide
Finish/Coating Uncoated
Material Application Composites; Fiberglass
Cutting Direction Right Hand
Shank Length (Decimal Inch) 1.5840

$ 22.85
Kennametal - 1/4" Diam, 3/4" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-1/2" OAL, 1/4" Shank Diam, Use on Composites, Fiberglass - Exact Tooling

Kennametal - 1/4" Diam, 3/4" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-1/2" OAL, 1/4" Shank Diam, Use on Composites, Fiberglass


Item #: 46880555
Brand: Kennametal
Model #: 4137459
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 6.35
Cutting Diameter (Inch) 1/4
Cutting Diameter (Decimal Inch) 0.2500
End Type Burr
Length of Cut (Decimal Inch) 0.7500
Length of Cut (Inch) 3/4
Shank Diameter (mm) 6.35
Shank Diameter (Inch) 1/4
Overall Length (Inch) 2-1/2
Material Solid Carbide
Finish/Coating Diamond
Material Application Composites; Fiberglass
Cutting Direction Right Hand
Shank Length (Decimal Inch) 1.5840

$ 186.87
Kennametal - 10mm Cutting Diam x 18.01mm Length of Cut, 4 Flute, Compression Spiral Router Bit - Diamond Coated, Right Hand Cut, Solid Carbide, 83mm OAL x 10mm Shank Diam, Double Edge, 25° Helix Angle - Exact Tooling

Kennametal - 10mm Cutting Diam x 18.01mm Length of Cut, 4 Flute, Compression Spiral Router Bit - Diamond Coated, Right Hand Cut, Solid Carbide, 83mm OAL x 10mm Shank Diam, Double Edge, 25° Helix Angle


Item #: 58458811
Brand: Kennametal
Model #: 4137281
Exact Tooling IR#: 04

Features and Benefits

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 10.00
Cutting Diameter (Decimal Inch) 0.3937
Number of Flutes 4
Flute Type Compression
Cutting Direction Right Hand
Material Application Composites; Fiberglass
Material Solid Carbide
Length of Cut (mm) 18.01
Length of Cut (Decimal Inch) 0.7090
Shank Diameter (mm) 10.00
Shank Diameter (Decimal Inch) 0.3937
Overall Length (mm) 83.00
Router Style Double Edge
Finish/Coating Diamond
Piloted No
Helix Angle 25.00
Shank Length (Decimal Inch) 2.3209
Cutting Diameter Tolerance (Decimal Inch) +0.000/-0.003

$ 461.09
Kennametal - 10mm Cutting Diam x 18mm Length of Cut, 6 Flute, Downcut Spiral Router Bit - Diamond Coated, Left Hand Cut, Solid Carbide, 83mm OAL x 10mm Shank Diam, Double Edge, 25° Helix Angle - Exact Tooling

Kennametal - 10mm Cutting Diam x 18mm Length of Cut, 6 Flute, Downcut Spiral Router Bit - Diamond Coated, Left Hand Cut, Solid Carbide, 83mm OAL x 10mm Shank Diam, Double Edge, 25° Helix Angle


Item #: 58458670
Brand: Kennametal
Model #: 4137737
Exact Tooling IR#: 04

Features and Benefits

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 10.00
Cutting Diameter (Decimal Inch) 0.3937
Number of Flutes 6
Flute Type Downcut
Cutting Direction Left Hand
Material Application Composites; Fiberglass
Material Solid Carbide
Length of Cut (mm) 18.00
Length of Cut (Decimal Inch) 0.7087
Shank Diameter (mm) 10.00
Shank Diameter (Decimal Inch) 0.3937
Overall Length (mm) 83.00
Router Style Double Edge
Finish/Coating Diamond
Piloted No
Helix Angle 25.00
Shank Length (Decimal Inch) 2.3299
Cutting Diameter Tolerance (Decimal Inch) +0.000/-0.003

$ 394.07
Kennametal - 10mm Cutting Diam x 35.99mm Length of Cut, 4 Flute, Compression Spiral Router Bit - Diamond Coated, Right Hand Cut, Solid Carbide, 100mm OAL x 10mm Shank Diam, Double Edge, 25° Helix Angle - Exact Tooling

Kennametal - 10mm Cutting Diam x 35.99mm Length of Cut, 4 Flute, Compression Spiral Router Bit - Diamond Coated, Right Hand Cut, Solid Carbide, 100mm OAL x 10mm Shank Diam, Double Edge, 25° Helix Angle


Item #: 58458803
Brand: Kennametal
Model #: 4137282
Exact Tooling IR#: 04

Features and Benefits

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 10.00
Cutting Diameter (Decimal Inch) 0.3937
Number of Flutes 4
Flute Type Compression
Cutting Direction Right Hand
Material Application Composites; Fiberglass
Material Solid Carbide
Length of Cut (mm) 35.99
Length of Cut (Decimal Inch) 1.4170
Shank Diameter (mm) 10.00
Shank Diameter (Decimal Inch) 0.3937
Overall Length (mm) 100.00
Router Style Double Edge
Finish/Coating Diamond
Piloted No
Helix Angle 25.00
Shank Length (Decimal Inch) 2.2819
Cutting Diameter Tolerance (Decimal Inch) +0.000/-0.003

$ 671.16
Kennametal - 10mm Cutting Diam x 36mm Length of Cut, 6 Flute, Downcut Spiral Router Bit - Diamond Coated, Left Hand Cut, Solid Carbide, 100mm OAL x 10mm Shank Diam, Double Edge, 25° Helix Angle - Exact Tooling

Kennametal - 10mm Cutting Diam x 36mm Length of Cut, 6 Flute, Downcut Spiral Router Bit - Diamond Coated, Left Hand Cut, Solid Carbide, 100mm OAL x 10mm Shank Diam, Double Edge, 25° Helix Angle


Item #: 58458662
Brand: Kennametal
Model #: 4137738
Exact Tooling IR#: 04

Features and Benefits

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 10.00
Cutting Diameter (Decimal Inch) 0.3937
Number of Flutes 6
Flute Type Downcut
Cutting Direction Left Hand
Material Application Composites; Fiberglass
Material Solid Carbide
Length of Cut (mm) 36.00
Length of Cut (Decimal Inch) 1.4173
Shank Diameter (mm) 10.00
Shank Diameter (Decimal Inch) 0.3937
Overall Length (mm) 100.00
Router Style Double Edge
Finish/Coating Diamond
Piloted No
Helix Angle 25.00
Shank Length (Decimal Inch) 2.2909
Cutting Diameter Tolerance (Decimal Inch) +0.000/-0.003

$ 590.16
Kennametal - 10mm Diam, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3-15/16" OAL, Use on Composites, Fiberglass - Exact Tooling

Kennametal - 10mm Diam, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3-15/16" OAL, Use on Composites, Fiberglass


Item #: 46880480
Brand: Kennametal
Model #: 4137478
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 10.00
Cutting Diameter (Decimal Inch) 0.3937
End Type Burr
Length of Cut (Decimal Inch) 1.4170
Shank Diameter (mm) 10.00
Overall Length (Inch) 3-15/16
Material Solid Carbide
Finish/Coating Diamond
Material Application Composites; Fiberglass
Cutting Direction Right Hand
Shank Length (Decimal Inch) 2.3120

$ 588.75
Kennametal - 10mm Diam, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 83mm OAL, Use on Composites, Fiberglass - Exact Tooling

Kennametal - 10mm Diam, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 83mm OAL, Use on Composites, Fiberglass


Item #: 46880498
Brand: Kennametal
Model #: 4137477
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 10.00
Cutting Diameter (Decimal Inch) 0.3937
End Type Burr
Length of Cut (Decimal Inch) 0.7090
Shank Diameter (mm) 10.00
Overall Length (mm) 83.00
Material Solid Carbide
Finish/Coating Diamond
Material Application Composites; Fiberglass
Cutting Direction Right Hand
Shank Length (Decimal Inch) 2.3520

$ 390.87
Kennametal - 12mm Diam, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3-15/16" OAL, Use on Composites, Fiberglass - Exact Tooling

Kennametal - 12mm Diam, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3-15/16" OAL, Use on Composites, Fiberglass


Item #: 46880464
Brand: Kennametal
Model #: 4137480
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 12.00
Cutting Diameter (Decimal Inch) 0.4724
End Type Burr
Length of Cut (Decimal Inch) 1.4170
Shank Diameter (mm) 12.00
Overall Length (Inch) 3-15/16
Material Solid Carbide
Finish/Coating Diamond
Material Application Composites; Fiberglass
Cutting Direction Right Hand
Shank Length (Decimal Inch) 2.2940

$ 655.08
Kennametal - 3/8" Cutting Diam x 1-1/2" Length of Cut, 4 Flute, Compression Spiral Router Bit - Diamond Coated, Right Hand Cut, Solid Carbide, 4" OAL x 3/8" Shank Diam, Double Edge, 25° Helix Angle - Exact Tooling

Kennametal - 3/8" Cutting Diam x 1-1/2" Length of Cut, 4 Flute, Compression Spiral Router Bit - Diamond Coated, Right Hand Cut, Solid Carbide, 4" OAL x 3/8" Shank Diam, Double Edge, 25° Helix Angle


Item #: 58458761
Brand: Kennametal
Model #: 4137449
Exact Tooling IR#: 04

Features and Benefits

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 9.53
Cutting Diameter (Inch) 3/8
Cutting Diameter (Decimal Inch) 0.3750
Number of Flutes 4
Flute Type Compression
Cutting Direction Right Hand
Material Application Composites; Fiberglass
Material Solid Carbide
Length of Cut (mm) 38.10
Length of Cut (Decimal Inch) 1.5000
Length of Cut (Inch) 1-1/2
Shank Diameter (mm) 9.53
Shank Diameter (Inch) 3/8
Shank Diameter (Decimal Inch) 0.3750
Overall Length (mm) 101.60
Overall Length (Inch) 4
Router Style Double Edge
Finish/Coating Diamond
Piloted No
Helix Angle 25.00
Shank Length (Decimal Inch) 2.2670
Cutting Diameter Tolerance (Decimal Inch) +0.000/-0.003

$ 509.30
Kennametal - 3/8" Cutting Diam x 1-1/2" Length of Cut, 6 Flute, Downcut Spiral Router Bit - Diamond Coated, Left Hand Cut, Solid Carbide, 4" OAL x 3/8" Shank Diam, Double Edge, 25° Helix Angle - Exact Tooling

Kennametal - 3/8" Cutting Diam x 1-1/2" Length of Cut, 6 Flute, Downcut Spiral Router Bit - Diamond Coated, Left Hand Cut, Solid Carbide, 4" OAL x 3/8" Shank Diam, Double Edge, 25° Helix Angle


Item #: 58458712
Brand: Kennametal
Model #: 4137722
Exact Tooling IR#: 04

Features and Benefits

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 9.53
Cutting Diameter (Inch) 3/8
Cutting Diameter (Decimal Inch) 0.3750
Number of Flutes 6
Flute Type Downcut
Cutting Direction Left Hand
Material Application Composites; Fiberglass
Material Solid Carbide
Length of Cut (mm) 38.10
Length of Cut (Decimal Inch) 1.5000
Length of Cut (Inch) 1-1/2
Shank Diameter (mm) 9.53
Shank Diameter (Inch) 3/8
Shank Diameter (Decimal Inch) 0.3750
Overall Length (mm) 101.60
Overall Length (Inch) 4
Router Style Double Edge
Finish/Coating Diamond
Piloted No
Helix Angle 25.00
Shank Length (Decimal Inch) 2.2760
Cutting Diameter Tolerance (Decimal Inch) +0.000/-0.003

$ 444.47
Kennametal - 3/8" Cutting Diam x 3/4" Length of Cut, 6 Flute, Downcut Spiral Router Bit - Diamond Coated, Left Hand Cut, Solid Carbide, 3-1/4" OAL x 3/8" Shank Diam, Double Edge, 25° Helix Angle - Exact Tooling

Kennametal - 3/8" Cutting Diam x 3/4" Length of Cut, 6 Flute, Downcut Spiral Router Bit - Diamond Coated, Left Hand Cut, Solid Carbide, 3-1/4" OAL x 3/8" Shank Diam, Double Edge, 25° Helix Angle


Item #: 58458720
Brand: Kennametal
Model #: 4137721
Exact Tooling IR#: 04

Features and Benefits

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 9.53
Cutting Diameter (Inch) 3/8
Cutting Diameter (Decimal Inch) 0.3750
Number of Flutes 6
Flute Type Downcut
Cutting Direction Left Hand
Material Application Composites; Fiberglass
Material Solid Carbide
Length of Cut (mm) 19.05
Length of Cut (Decimal Inch) 0.7500
Length of Cut (Inch) 3/4
Shank Diameter (mm) 9.53
Shank Diameter (Inch) 3/8
Shank Diameter (Decimal Inch) 0.3750
Overall Length (mm) 82.55
Overall Length (Inch) 3-1/4
Router Style Double Edge
Finish/Coating Diamond
Piloted No
Helix Angle 25.00
Shank Length (Decimal Inch) 2.2760
Cutting Diameter Tolerance (Decimal Inch) +0.000/-0.003

$ 312.15
Kennametal - 3/8" Diam, 1-1/2" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 4" OAL, 3/8" Shank Diam, Use on Composites, Fiberglass - Exact Tooling

Kennametal - 3/8" Diam, 1-1/2" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 4" OAL, 3/8" Shank Diam, Use on Composites, Fiberglass


Item #: 46880530
Brand: Kennametal
Model #: 4137462
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 9.53
Cutting Diameter (Inch) 3/8
Cutting Diameter (Decimal Inch) 0.3750
End Type Burr
Length of Cut (Decimal Inch) 1.5000
Length of Cut (Inch) 1-1/2
Shank Diameter (mm) 9.53
Shank Diameter (Inch) 3/8
Overall Length (Inch) 4
Material Solid Carbide
Finish/Coating Diamond
Material Application Composites; Fiberglass
Cutting Direction Right Hand
Shank Length (Decimal Inch) 2.2970

$ 444.67
Kennametal - 3/8" Diam, 3/4" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3-1/4" OAL, 3/8" Shank Diam, Use on Composites, Fiberglass - Exact Tooling

Kennametal - 3/8" Diam, 3/4" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3-1/4" OAL, 3/8" Shank Diam, Use on Composites, Fiberglass


Item #: 58453689
Brand: Kennametal
Model #: 4137461
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 9.53
Cutting Diameter (Inch) 3/8
Cutting Diameter (Decimal Inch) 0.3750
End Type Burr
Length of Cut (Decimal Inch) 0.7500
Length of Cut (Inch) 3/4
Shank Diameter (mm) 9.53
Shank Diameter (Inch) 3/8
Overall Length (Inch) 3-1/4
Material Solid Carbide
Finish/Coating Diamond
Material Application Composites; Fiberglass
Cutting Direction Right Hand
Shank Length (Decimal Inch) 2.2970

$ 309.70
Kennametal - 6mm Cutting Diam x 18mm Length of Cut, 6 Flute, Downcut Spiral Router Bit - Diamond Coated, Left Hand Cut, Solid Carbide, 63mm OAL x 6mm Shank Diam, Double Edge, 25° Helix Angle - Exact Tooling

Kennametal - 6mm Cutting Diam x 18mm Length of Cut, 6 Flute, Downcut Spiral Router Bit - Diamond Coated, Left Hand Cut, Solid Carbide, 63mm OAL x 6mm Shank Diam, Double Edge, 25° Helix Angle


Item #: 58458696
Brand: Kennametal
Model #: 4137735
Exact Tooling IR#: 04

Features and Benefits

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 6.00
Cutting Diameter (Decimal Inch) 0.2362
Number of Flutes 6
Flute Type Downcut
Cutting Direction Left Hand
Material Application Composites; Fiberglass
Material Solid Carbide
Length of Cut (mm) 18.00
Length of Cut (Decimal Inch) 0.7087
Shank Diameter (mm) 6.00
Shank Diameter (Decimal Inch) 0.2362
Overall Length (mm) 63.00
Router Style Double Edge
Finish/Coating Diamond
Piloted No
Helix Angle 25.00
Shank Length (Decimal Inch) 1.5929
Cutting Diameter Tolerance (Decimal Inch) +0.000/-0.003

$ 219.41
Kennametal - 6mm Cutting Diam x 36mm Length of Cut, 6 Flute, Downcut Spiral Router Bit - Diamond Coated, Left Hand Cut, Solid Carbide, 100mm OAL x 6mm Shank Diam, Double Edge, 25° Helix Angle - Exact Tooling

Kennametal - 6mm Cutting Diam x 36mm Length of Cut, 6 Flute, Downcut Spiral Router Bit - Diamond Coated, Left Hand Cut, Solid Carbide, 100mm OAL x 6mm Shank Diam, Double Edge, 25° Helix Angle


Item #: 58458688
Brand: Kennametal
Model #: 4137736
Exact Tooling IR#: 04

Features and Benefits

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 6.00
Cutting Diameter (Decimal Inch) 0.2362
Number of Flutes 6
Flute Type Downcut
Cutting Direction Left Hand
Material Application Composites; Fiberglass
Material Solid Carbide
Length of Cut (mm) 36.00
Length of Cut (Decimal Inch) 1.4173
Shank Diameter (mm) 6.00
Shank Diameter (Decimal Inch) 0.2362
Overall Length (mm) 100.00
Router Style Double Edge
Finish/Coating Diamond
Piloted No
Helix Angle 25.00
Shank Length (Decimal Inch) 2.3421
Cutting Diameter Tolerance (Decimal Inch) +0.000/-0.003

$ 310.88
Kennametal - 6mm Diam, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3-15/16" OAL, Use on Composites, Fiberglass - Exact Tooling

Kennametal - 6mm Diam, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3-15/16" OAL, Use on Composites, Fiberglass


Item #: 58453697
Brand: Kennametal
Model #: 4137476
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 6.00
Cutting Diameter (Decimal Inch) 0.2362
End Type Burr
Length of Cut (Decimal Inch) 1.4170
Shank Diameter (mm) 6.00
Overall Length (Inch) 3-15/16
Material Solid Carbide
Finish/Coating Diamond
Material Application Composites; Fiberglass
Cutting Direction Right Hand
Shank Length (Decimal Inch) 2.3590

$ 319.67
Kennametal - 6mm Diam, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Composites, Fiberglass - Exact Tooling

Kennametal - 6mm Diam, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Composites, Fiberglass


Item #: 46880506
Brand: Kennametal
Model #: 4137475
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 6.00
Cutting Diameter (Decimal Inch) 0.2362
End Type Burr
Length of Cut (Decimal Inch) 0.7090
Shank Diameter (mm) 6.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating Diamond
Material Application Composites; Fiberglass
Cutting Direction Right Hand
Shank Length (Decimal Inch) 1.6110

$ 222.44
Komet - 10mm Diam, 10mm Shank Diam, 10mm Length of Cut, 2 Flute Straight Router Bit - 72mm Overall Length, Right Hand Cut, Diamond (PCD) - Exact Tooling

Komet - 10mm Diam, 10mm Shank Diam, 10mm Length of Cut, 2 Flute Straight Router Bit - 72mm Overall Length, Right Hand Cut, Diamond (PCD)


Item #: 66171679
Brand: Komet
Model #: 38390000001000
Exact Tooling IR#: 04

Product Specifications
Cutting Diameter (mm) 10.00
Cutting Diameter (Decimal Inch) 0.3937
Number of Flutes 2
Length of Cut (mm) 10.00
Length of Cut (Decimal Inch) 0.3937
Material Diamond (PCD)
Shank Diameter (mm) 10.00
Cutting Direction Right Hand
Overall Length (mm) 72.00
Piloted No
Flute Type Straight

$ 547.60