Email: sales@exacttooling.com
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

Products - (25001 Products)

M.A. Ford - 5mm Diam, Plain End, Solid Carbide Diamond Pattern Router Bit - 51mm OAL - Exact Tooling

M.A. Ford - 5mm Diam, Plain End, Solid Carbide Diamond Pattern Router Bit - 51mm OAL


Item #: 50888155
Brand: M.A. Ford
Model #: 23019680
Exact Tooling IR#: 04

Features and Benefits

Plain (No End), also known as Safe End router bits, are used for edge routing and applications when no floor finish cuts are required.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 5.00
Cutting Diameter (Decimal Inch) 0.1968
End Type Plain (No End)
Length of Cut (Decimal Inch) 0.6290
Shank Diameter (mm) 5.00
Overall Length (mm) 51.00
Material Solid Carbide
Finish/Coating Uncoated

$ 22.25
M.A. Ford - 6mm Diam, Burr End, Solid Carbide Diamond Pattern Router Bit - 51mm OAL - Exact Tooling

M.A. Ford - 6mm Diam, Burr End, Solid Carbide Diamond Pattern Router Bit - 51mm OAL


Item #: 50888510
Brand: M.A. Ford
Model #: 23123620B
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 6.00
Cutting Diameter (Decimal Inch) 0.2362
End Type Burr
Length of Cut (Decimal Inch) 0.7480
Shank Diameter (mm) 6.00
Overall Length (mm) 51.00
Material Solid Carbide
Finish/Coating Uncoated

$ 30.00
M.A. Ford - 6mm Diam, Drill Point End, Solid Carbide Diamond Pattern Router Bit - 51mm OAL - Exact Tooling

M.A. Ford - 6mm Diam, Drill Point End, Solid Carbide Diamond Pattern Router Bit - 51mm OAL


Item #: 50888502
Brand: M.A. Ford
Model #: 23123620D
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 6.00
Cutting Diameter (Decimal Inch) 0.2362
End Type Drill Point
Length of Cut (Decimal Inch) 0.7480
Shank Diameter (mm) 6.00
Overall Length (mm) 51.00
Material Solid Carbide
Finish/Coating Uncoated

$ 28.80
M.A. Ford - 6mm Diam, End Mill End, Solid Carbide Diamond Pattern Router Bit - 51mm OAL - Exact Tooling

M.A. Ford - 6mm Diam, End Mill End, Solid Carbide Diamond Pattern Router Bit - 51mm OAL


Item #: 50888528
Brand: M.A. Ford
Model #: 23123620
Exact Tooling IR#: 04

Features and Benefits

End Mill router bits are used for bottom cutting and are designed to produce a smooth surface with a square corner
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 6.00
Cutting Diameter (Decimal Inch) 0.2362
End Type End Mill
Length of Cut (Decimal Inch) 0.7480
Shank Diameter (mm) 6.00
Overall Length (mm) 51.00
Material Solid Carbide
Finish/Coating Uncoated

$ 28.80
M.A. Ford - 6mm Diam, Fishtail Point End, Solid Carbide Diamond Pattern Router Bit - 51mm OAL - Exact Tooling

M.A. Ford - 6mm Diam, Fishtail Point End, Solid Carbide Diamond Pattern Router Bit - 51mm OAL


Item #: 50888494
Brand: M.A. Ford
Model #: 23123620F
Exact Tooling IR#: 04

Features and Benefits

Fishtail ends are designed with a double flute (or reverse V-shaped ends) and produce a flat surface at the bottom of the workpiece. Ideal for fine detail work and on thin materials.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 6.00
Cutting Diameter (Decimal Inch) 0.2362
End Type Fishtail Point
Length of Cut (Decimal Inch) 0.7480
Shank Diameter (mm) 6.00
Overall Length (mm) 51.00
Material Solid Carbide
Finish/Coating Uncoated

$ 28.80
M.A. Ford - 6mm Diam, Plain End, Solid Carbide Diamond Pattern Router Bit - 51mm OAL - Exact Tooling

M.A. Ford - 6mm Diam, Plain End, Solid Carbide Diamond Pattern Router Bit - 51mm OAL


Item #: 50889153
Brand: M.A. Ford
Model #: 23023620
Exact Tooling IR#: 04

Features and Benefits

Plain (No End), also known as Safe End router bits, are used for edge routing and applications when no floor finish cuts are required.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 6.00
Cutting Diameter (Decimal Inch) 0.2362
End Type Plain (No End)
Length of Cut (Decimal Inch) 0.7480
Shank Diameter (mm) 6.00
Overall Length (mm) 51.00
Material Solid Carbide
Finish/Coating Uncoated

$ 25.02
M.A. Ford - 8mm Diam, Burr End, Solid Carbide Diamond Pattern Router Bit - 64mm OAL - Exact Tooling

M.A. Ford - 8mm Diam, Burr End, Solid Carbide Diamond Pattern Router Bit - 64mm OAL


Item #: 50888353
Brand: M.A. Ford
Model #: 23131500B
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Burr
Length of Cut (Decimal Inch) 0.8660
Shank Diameter (mm) 8.00
Overall Length (mm) 64.00
Material Solid Carbide
Finish/Coating Uncoated

$ 61.41
M.A. Ford - 8mm Diam, Drill Point End, Solid Carbide Diamond Pattern Router Bit - 64mm OAL - Exact Tooling

M.A. Ford - 8mm Diam, Drill Point End, Solid Carbide Diamond Pattern Router Bit - 64mm OAL


Item #: 50888346
Brand: M.A. Ford
Model #: 23131500D
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Drill Point
Length of Cut (Decimal Inch) 0.8660
Shank Diameter (mm) 8.00
Overall Length (mm) 64.00
Material Solid Carbide
Finish/Coating Uncoated

$ 58.98
M.A. Ford - 8mm Diam, End Mill End, Solid Carbide Diamond Pattern Router Bit - 64mm OAL - Exact Tooling

M.A. Ford - 8mm Diam, End Mill End, Solid Carbide Diamond Pattern Router Bit - 64mm OAL


Item #: 50888379
Brand: M.A. Ford
Model #: 23131500
Exact Tooling IR#: 04

Features and Benefits

End Mill router bits are used for bottom cutting and are designed to produce a smooth surface with a square corner
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type End Mill
Length of Cut (Decimal Inch) 0.8660
Shank Diameter (mm) 8.00
Overall Length (mm) 64.00
Material Solid Carbide
Finish/Coating Uncoated

$ 58.98
M.A. Ford - 8mm Diam, Fishtail Point End, Solid Carbide Diamond Pattern Router Bit - 64mm OAL - Exact Tooling

M.A. Ford - 8mm Diam, Fishtail Point End, Solid Carbide Diamond Pattern Router Bit - 64mm OAL


Item #: 50888338
Brand: M.A. Ford
Model #: 23131500F
Exact Tooling IR#: 04

Features and Benefits

Fishtail ends are designed with a double flute (or reverse V-shaped ends) and produce a flat surface at the bottom of the workpiece. Ideal for fine detail work and on thin materials.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Fishtail Point
Length of Cut (Decimal Inch) 0.8660
Shank Diameter (mm) 8.00
Overall Length (mm) 64.00
Material Solid Carbide
Finish/Coating Uncoated

$ 58.98
M.A. Ford - 8mm Diam, Plain End, Solid Carbide Diamond Pattern Router Bit - 64mm OAL - Exact Tooling

M.A. Ford - 8mm Diam, Plain End, Solid Carbide Diamond Pattern Router Bit - 64mm OAL


Item #: 50889112
Brand: M.A. Ford
Model #: 23031500
Exact Tooling IR#: 04

Features and Benefits

Plain (No End), also known as Safe End router bits, are used for edge routing and applications when no floor finish cuts are required.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Plain (No End)
Length of Cut (Decimal Inch) 0.8660
Shank Diameter (mm) 8.00
Overall Length (mm) 64.00
Material Solid Carbide
Finish/Coating Uncoated

$ 51.22
Made in USA - 1.5mm Diam, 5mm LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 38mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 1.5mm Diam, 5mm LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 38mm OAL, Use on Fiberglass


Item #: 51948792
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 1.50
Cutting Diameter (Decimal Inch) 0.0591
End Type Burr
Length of Cut (mm) 5.00
Length of Cut (Decimal Inch) 0.1969
Shank Diameter (mm) 3.00
Overall Length (mm) 38.00
Material Solid Carbide
Finish/Coating Uncoated
Material Application Fiberglass
Cutting Direction Right Hand

$ 13.50
Made in USA - 1.5mm Diam, 5mm LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 38mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 1.5mm Diam, 5mm LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 38mm OAL, Use on Fiberglass


Item #: 51985174
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.
Product Specifications
Cutting Diameter (mm) 1.50
Cutting Diameter (Decimal Inch) 0.0591
End Type Burr
Length of Cut (mm) 5.00
Length of Cut (Decimal Inch) 0.1969
Shank Diameter (mm) 3.00
Overall Length (mm) 38.00
Material Solid Carbide
Finish/Coating ZrN
Material Application Fiberglass
Cutting Direction Right Hand

$ 16.16
Made in USA - 1.5mm Diam, 5mm LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 38mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 1.5mm Diam, 5mm LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 38mm OAL, Use on Fiberglass


Item #: 51948750
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Cutting Diameter (mm) 1.50
Cutting Diameter (Decimal Inch) 0.0591
End Type Burr
Length of Cut (mm) 5.00
Length of Cut (Decimal Inch) 0.1969
Shank Diameter (mm) 3.00
Overall Length (mm) 38.00
Material Solid Carbide
Finish/Coating AlTiN
Material Application Fiberglass
Cutting Direction Right Hand

$ 16.16
Made in USA - 1.5mm Diam, 5mm LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 38mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 1.5mm Diam, 5mm LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 38mm OAL, Use on Fiberglass


Item #: 51992667
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 1.50
Cutting Diameter (Decimal Inch) 0.0591
End Type Drill Point
Length of Cut (mm) 5.00
Length of Cut (Decimal Inch) 0.1969
Shank Diameter (mm) 3.00
Overall Length (mm) 38.00
Material Solid Carbide
Finish/Coating Uncoated
Material Application Fiberglass
Cutting Direction Right Hand

$ 13.50
Made in USA - 1.5mm Diam, 5mm LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 38mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 1.5mm Diam, 5mm LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 38mm OAL, Use on Fiberglass


Item #: 51932341
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Cutting Diameter (mm) 1.50
Cutting Diameter (Decimal Inch) 0.0591
End Type Drill Point
Length of Cut (mm) 5.00
Length of Cut (Decimal Inch) 0.1969
Shank Diameter (mm) 3.00
Overall Length (mm) 38.00
Material Solid Carbide
Finish/Coating AlTiN
Material Application Fiberglass
Cutting Direction Right Hand

$ 16.16
Made in USA - 1.5mm Diam, 5mm LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 38mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 1.5mm Diam, 5mm LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 38mm OAL, Use on Fiberglass


Item #: 51932234
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.
Product Specifications
Cutting Diameter (mm) 1.50
Cutting Diameter (Decimal Inch) 0.0591
End Type Drill Point
Length of Cut (mm) 5.00
Length of Cut (Decimal Inch) 0.1969
Shank Diameter (mm) 3.00
Overall Length (mm) 38.00
Material Solid Carbide
Finish/Coating ZrN
Material Application Fiberglass
Cutting Direction Right Hand

$ 16.16
Made in USA - 1.5mm Diam, 5mm LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 38mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 1.5mm Diam, 5mm LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 38mm OAL, Use on Fiberglass


Item #: 51948735
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

End Mill router bits are used for bottom cutting and are designed to produce a smooth surface with a square corner
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.
Product Specifications
Cutting Diameter (mm) 1.50
Cutting Diameter (Decimal Inch) 0.0591
End Type End Mill
Length of Cut (mm) 5.00
Length of Cut (Decimal Inch) 0.1969
Shank Diameter (mm) 3.00
Overall Length (mm) 38.00
Material Solid Carbide
Finish/Coating ZrN
Material Application Fiberglass
Cutting Direction Right Hand

$ 16.16
Made in USA - 1.5mm Diam, 5mm LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 38mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 1.5mm Diam, 5mm LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 38mm OAL, Use on Fiberglass


Item #: 51932275
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

End Mill router bits are used for bottom cutting and are designed to produce a smooth surface with a square corner
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Cutting Diameter (mm) 1.50
Cutting Diameter (Decimal Inch) 0.0591
End Type End Mill
Length of Cut (mm) 5.00
Length of Cut (Decimal Inch) 0.1969
Shank Diameter (mm) 3.00
Overall Length (mm) 38.00
Material Solid Carbide
Finish/Coating AlTiN
Material Application Fiberglass
Cutting Direction Right Hand

$ 16.16
Made in USA - 1.5mm Diam, 5mm LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 38mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 1.5mm Diam, 5mm LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 38mm OAL, Use on Fiberglass


Item #: 51932267
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

End Mill router bits are used for bottom cutting and are designed to produce a smooth surface with a square corner
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 1.50
Cutting Diameter (Decimal Inch) 0.0591
End Type End Mill
Length of Cut (mm) 5.00
Length of Cut (Decimal Inch) 0.1969
Shank Diameter (mm) 3.00
Overall Length (mm) 38.00
Material Solid Carbide
Finish/Coating Uncoated
Material Application Fiberglass
Cutting Direction Right Hand

$ 13.50