Email: sales@exacttooling.com
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

Products - (25001 Products)

Made in USA - 7/16" Diam, 1" LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3" OAL, 7/16" Shank Diam, Use on Cast Iron, Stainless, Steel, Titanium - Exact Tooling

Made in USA - 7/16" Diam, 1" LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3" OAL, 7/16" Shank Diam, Use on Cast Iron, Stainless, Steel, Titanium


Item #: 51943819
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Plain (No End), also known as Safe End router bits, are used for edge routing and applications when no floor finish cuts are required.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Product Specifications
Cutting Diameter (Inch) 7/16
Cutting Diameter (Decimal Inch) 0.4375
End Type Plain (No End)
Length of Cut (Decimal Inch) 1.0000
Length of Cut (Inch) 1
Shank Diameter (Inch) 7/16
Overall Length (Inch) 3
Material Solid Carbide
Finish/Coating TiN
Material Application Cast Iron; Stainless; Steel; Titanium
Cutting Direction Right Hand

$ 60.18
Made in USA - 7/16" Diam, 1" LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3" OAL, 7/16" Shank Diam, Use on Cast Iron, Stainless, Steel, Titanium - Exact Tooling

Made in USA - 7/16" Diam, 1" LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3" OAL, 7/16" Shank Diam, Use on Cast Iron, Stainless, Steel, Titanium


Item #: 51943918
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Plain (No End), also known as Safe End router bits, are used for edge routing and applications when no floor finish cuts are required.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.
Product Specifications
Cutting Diameter (Inch) 7/16
Cutting Diameter (Decimal Inch) 0.4375
End Type Plain (No End)
Length of Cut (Decimal Inch) 1.0000
Length of Cut (Inch) 1
Shank Diameter (Inch) 7/16
Overall Length (Inch) 3
Material Solid Carbide
Finish/Coating ZrN
Material Application Cast Iron; Stainless; Steel; Titanium
Cutting Direction Right Hand

$ 60.18
Made in USA - 8mm Diam, 22mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL - Exact Tooling

Made in USA - 8mm Diam, 22mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL


Item #: 51921708
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Plain (No End), also known as Safe End router bits, are used for edge routing and applications when no floor finish cuts are required.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Plain (No End)
Length of Cut (mm) 22.00
Length of Cut (Decimal Inch) 0.8661
Shank Diameter (mm) 8.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating Uncoated
Cutting Direction Right Hand

$ 29.11
Made in USA - 8mm Diam, 22mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL - Exact Tooling

Made in USA - 8mm Diam, 22mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL


Item #: 51921567
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Plain (No End), also known as Safe End router bits, are used for edge routing and applications when no floor finish cuts are required.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Plain (No End)
Length of Cut (mm) 22.00
Length of Cut (Decimal Inch) 0.8661
Shank Diameter (mm) 8.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating ZrN
Cutting Direction Right Hand

$ 42.29
Made in USA - 8mm Diam, 22mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL - Exact Tooling

Made in USA - 8mm Diam, 22mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL


Item #: 51921724
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Plain (No End), also known as Safe End router bits, are used for edge routing and applications when no floor finish cuts are required.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Plain (No End)
Length of Cut (mm) 22.00
Length of Cut (Decimal Inch) 0.8661
Shank Diameter (mm) 8.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating Uncoated
Cutting Direction Right Hand

$ 32.11
Made in USA - 8mm Diam, 22mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL - Exact Tooling

Made in USA - 8mm Diam, 22mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL


Item #: 51997658
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Plain (No End), also known as Safe End router bits, are used for edge routing and applications when no floor finish cuts are required.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Plain (No End)
Length of Cut (mm) 22.00
Length of Cut (Decimal Inch) 0.8661
Shank Diameter (mm) 8.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating AlTiN
Cutting Direction Right Hand

$ 42.29
Made in USA - 8mm Diam, 22mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL - Exact Tooling

Made in USA - 8mm Diam, 22mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL


Item #: 51921716
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Plain (No End), also known as Safe End router bits, are used for edge routing and applications when no floor finish cuts are required.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Plain (No End)
Length of Cut (mm) 22.00
Length of Cut (Decimal Inch) 0.8661
Shank Diameter (mm) 8.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating ZrN
Cutting Direction Right Hand

$ 39.32
Made in USA - 8mm Diam, 22mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL - Exact Tooling

Made in USA - 8mm Diam, 22mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL


Item #: 51997567
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Plain (No End), also known as Safe End router bits, are used for edge routing and applications when no floor finish cuts are required.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Plain (No End)
Length of Cut (mm) 22.00
Length of Cut (Decimal Inch) 0.8661
Shank Diameter (mm) 8.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating AlTiN
Cutting Direction Right Hand

$ 39.32
Made in USA - 8mm Diam, 25mm LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 8mm Diam, 25mm LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass


Item #: 51938165
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Burr
Length of Cut (mm) 25.00
Length of Cut (Decimal Inch) 0.9843
Shank Diameter (mm) 8.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating AlTiN
Material Application Fiberglass
Cutting Direction Right Hand

$ 63.33
Made in USA - 8mm Diam, 25mm LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 8mm Diam, 25mm LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass


Item #: 51990414
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Burr
Length of Cut (mm) 25.00
Length of Cut (Decimal Inch) 0.9843
Shank Diameter (mm) 8.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating ZrN
Material Application Fiberglass
Cutting Direction Right Hand

$ 63.33
Made in USA - 8mm Diam, 25mm LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 8mm Diam, 25mm LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass


Item #: 51990448
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Burr
Length of Cut (mm) 25.00
Length of Cut (Decimal Inch) 0.9843
Shank Diameter (mm) 8.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating Uncoated
Material Application Fiberglass
Cutting Direction Right Hand

$ 53.18
Made in USA - 8mm Diam, 25mm LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 8mm Diam, 25mm LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass


Item #: 51938272
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Drill Point
Length of Cut (mm) 25.00
Length of Cut (Decimal Inch) 0.9843
Shank Diameter (mm) 8.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating AlTiN
Material Application Fiberglass
Cutting Direction Right Hand

$ 63.33
Made in USA - 8mm Diam, 25mm LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 8mm Diam, 25mm LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass


Item #: 51990398
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Drill Point
Length of Cut (mm) 25.00
Length of Cut (Decimal Inch) 0.9843
Shank Diameter (mm) 8.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating ZrN
Material Application Fiberglass
Cutting Direction Right Hand

$ 63.33
Made in USA - 8mm Diam, 25mm LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 8mm Diam, 25mm LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass


Item #: 51938249
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Drill Point
Length of Cut (mm) 25.00
Length of Cut (Decimal Inch) 0.9843
Shank Diameter (mm) 8.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating Uncoated
Material Application Fiberglass
Cutting Direction Right Hand

$ 53.18
Made in USA - 8mm Diam, 25mm LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 8mm Diam, 25mm LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass


Item #: 51938256
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

End Mill router bits are used for bottom cutting and are designed to produce a smooth surface with a square corner
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type End Mill
Length of Cut (mm) 25.00
Length of Cut (Decimal Inch) 0.9843
Shank Diameter (mm) 8.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating ZrN
Material Application Fiberglass
Cutting Direction Right Hand

$ 63.33
Made in USA - 8mm Diam, 25mm LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 8mm Diam, 25mm LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass


Item #: 51938447
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

End Mill router bits are used for bottom cutting and are designed to produce a smooth surface with a square corner
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type End Mill
Length of Cut (mm) 25.00
Length of Cut (Decimal Inch) 0.9843
Shank Diameter (mm) 8.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating AlTiN
Material Application Fiberglass
Cutting Direction Right Hand

$ 63.33
Made in USA - 8mm Diam, 25mm LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 8mm Diam, 25mm LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass


Item #: 51938215
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

End Mill router bits are used for bottom cutting and are designed to produce a smooth surface with a square corner
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type End Mill
Length of Cut (mm) 25.00
Length of Cut (Decimal Inch) 0.9843
Shank Diameter (mm) 8.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating Uncoated
Material Application Fiberglass
Cutting Direction Right Hand

$ 53.18
Made in USA - 8mm Diam, 25mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 8mm Diam, 25mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass


Item #: 51990430
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Plain (No End), also known as Safe End router bits, are used for edge routing and applications when no floor finish cuts are required.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Plain (No End)
Length of Cut (mm) 25.00
Length of Cut (Decimal Inch) 0.9843
Shank Diameter (mm) 8.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating Uncoated
Material Application Fiberglass
Cutting Direction Right Hand

$ 48.23
Made in USA - 8mm Diam, 25mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 8mm Diam, 25mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass


Item #: 51938140
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Plain (No End), also known as Safe End router bits, are used for edge routing and applications when no floor finish cuts are required.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Plain (No End)
Length of Cut (mm) 25.00
Length of Cut (Decimal Inch) 0.9843
Shank Diameter (mm) 8.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating ZrN
Material Application Fiberglass
Cutting Direction Right Hand

$ 58.44
Made in USA - 8mm Diam, 25mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass - Exact Tooling

Made in USA - 8mm Diam, 25mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass


Item #: 51938132
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Plain (No End), also known as Safe End router bits, are used for edge routing and applications when no floor finish cuts are required.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Cutting Diameter (mm) 8.00
Cutting Diameter (Decimal Inch) 0.3150
End Type Plain (No End)
Length of Cut (mm) 25.00
Length of Cut (Decimal Inch) 0.9843
Shank Diameter (mm) 8.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating AlTiN
Material Application Fiberglass
Cutting Direction Right Hand

$ 58.44