Products - (25001 Products)
#33 Dia. × 0.1575″ Shank × 0.9843″ Usable Length × 2.5984″ OAL, 8xD, 140 Degree, AlTiN, 2 Flute, Coolant Through, HP Patriot Solid Carbide Drill
Item #: AV41928000532
Brand: Keo
Model #: 928-000-532
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | #33 |
| Shank Length (LS) | 1.1024″ |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #33 |
| Shank Type | Round |
| Length Group | 8xD |
| Measurement Type | Wire Gauge |
| Coating | TiAlN |
| Usable Length (LU) | 0.9843″ |
| Connection Diameter Machine Side (DCONMS) | 0.1575″ |
| Overall Length (OAL) | 2.5984″ |
| Coolant Supply Property (CSP) | Coolant Thru |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 140 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 1.1811″ |
| Single / Double End | Single End |
$ 141.16
#34 (.1110″) Circuit Board Drill
Item #: AV41925000126
Brand: Keo
Model #: 925-000-126
| Product Specifications | |
|---|---|
| Angle | 130 Degrees |
| Flute Count (NOF) | 2 |
| Coolant Supply Property (CSP) | External |
| Overall Length (OAL) | 1-1/2″ |
| Cutting Edge Material | Carbide |
| Shank Type | Straight |
| Flute Length | 0.4″ |
| Tool Diameter | #34 |
| Usable Length (LU) | 0.4″ |
$ 9.53
#88 (.0095″) Circuit Board Drill
Item #: AV41925000012
Brand: Keo
Model #: 925-000-012
| Product Specifications | |
|---|---|
| Angle | 118 Degrees |
| Flute Count (NOF) | 2 |
| Coolant Supply Property (CSP) | External |
| Overall Length (OAL) | 1-1/2″ |
| Cutting Edge Material | Carbide |
| Shank Type | Straight |
| Flute Length | 0.22″ |
| Tool Diameter | #88 |
| Usable Length (LU) | 0.22″ |
$ 22.28
#89 (.0091″) Circuit Board Drill
Item #: AV41925000011
Brand: Keo
Model #: 925-000-011
| Product Specifications | |
|---|---|
| Angle | 118 Degrees |
| Flute Count (NOF) | 2 |
| Coolant Supply Property (CSP) | External |
| Overall Length (OAL) | 1-1/2″ |
| Cutting Edge Material | Carbide |
| Shank Type | Straight |
| Flute Length | 0.22″ |
| Tool Diameter | #89 |
| Usable Length (LU) | 0.22″ |
$ 22.28
0.031″ × 0.01″ × 0.010R 2-Flute Carbide Corner Rounding Endmill, AlTiN
Item #: KE11932000315
Brand: Keo
Model #: 932-000-315
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.01″ |
| Coating | AlTiN |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Flute Count (NOF) | 2 |
| Overall Length (OAL) | 1-1/2″ |
| Shank Type | Round |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) | 0.01″ |
$ 43.37
0.1718″ Cutting Dia. × 3/16″ Shank Size × 5/8″ LOC × 2″ OAL, 3 Flute, Carbide, AlTiN, Square End Mill
Item #: GE90836411C3
Brand: Harvey Tool
Model #: 836411-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.1718″ |
| End Shape | Square |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Usable Length (LU) | 5/8″ |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Length Group | 3D |
| Overall Length (OAL) | 2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | AlTiN |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Size (SS) | 3/16″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
$ 23.35
0.1875″ Dia. × 0.1875″ Shank × 0.75″ DOC × 2.5″ OAL, ZPLUS, 2 Flute, Ballnose End Mill
Item #: HS1081320
Brand: Helical Solutions
Model #: 81320
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Length Group | 4D |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Decimal Equivalent | 0.1875″ |
| Overall Length (OAL) | 2-1/2″ |
| Measurement Type | Inch |
| Coating | ZPLUS |
| Shank Length (LS) | 1.75″ |
| Flute Count (NOF) | 2 |
$ 40.39
0.1875″ Dia. × 0.1875″ Shank × 0.75″ DOC × 2.5″ OAL, ZPLUS, 3 Flute, Ballnose End Mill
Item #: HS1049061
Brand: Helical Solutions
Model #: 49061
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Length Group | 4D |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Decimal Equivalent | 0.1875″ |
| Overall Length (OAL) | 2-1/2″ |
| Measurement Type | Inch |
| Coating | ZPLUS |
| Shank Length (LS) | 1.75″ |
| Flute Count (NOF) | 3 |
$ 38.71
0.1875″ Dia. × 0.1875″ Shank × 1″ DOC × 2.5″ OAL, APLUS, 4 Flute, Ballnose End Mill
Item #: HS1081676
Brand: Helical Solutions
Model #: 81676
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Length Group | 5D |
| Depth of Cut Maximum (APMX) | 1″ |
| Decimal Equivalent | 0.1875″ |
| Overall Length (OAL) | 2-1/2″ |
| Measurement Type | Inch |
| Coating | APLUS |
| Shank Length (LS) | 1.5″ |
| Flute Count (NOF) | 4 |
$ 33.76
0.1875″ Dia. × 0.1875″ Shank × 1″ DOC × 3″ OAL, UN, 3 Flute, Ballnose End Mill
Item #: HS1049065
Brand: Helical Solutions
Model #: 49065
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Length Group | 5D |
| Depth of Cut Maximum (APMX) | 1″ |
| Decimal Equivalent | 0.1875″ |
| Overall Length (OAL) | 3″ |
| Measurement Type | Inch |
| Coating | UN |
| Shank Length (LS) | 2″ |
| Flute Count (NOF) | 3 |
$ 40.10
0.1875″ Dia. × 0.1875″ Shank × 1″ DOC × 3″ OAL, ZPLUS, 3 Flute, Ballnose End Mill
Item #: HS1049066
Brand: Helical Solutions
Model #: 49066
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Length Group | 5D |
| Depth of Cut Maximum (APMX) | 1″ |
| Decimal Equivalent | 0.1875″ |
| Overall Length (OAL) | 3″ |
| Measurement Type | Inch |
| Coating | ZPLUS |
| Shank Length (LS) | 2″ |
| Flute Count (NOF) | 3 |
$ 44.35
0.25″ Dia. × 0.25″ Shank × 0.375″ DOC × 2.5″ OAL, UN, 3 Flute, Ballnose End Mill
Item #: HS1047075
Brand: Helical Solutions
Model #: 47075
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Neck Diameter (DN) | 0.237″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Neck Length (LN) | 0.375″ |
| Depth of Cut Maximum (APMX) | 3/8″ |
| Length Group | 1.5D |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.25″ |
| Coating | UN |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 1.75″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
$ 41.48
0.437″ Diameter × 4 1/2″ OAL, Brass, 85 Series-For Closed Holes
Item #: MJ7485B437
Brand: Brush Research
Model #: 85B437
| Product Specifications | |
|---|---|
| Type | 85 Series-For Closed Holes |
| Bristle Diameter | 0.005″ |
| Diameter | 0.437″ |
| Bore Diameter | 0.437″ |
| Stem Diameter | 0.168″ |
| Maximum RPM | 2,000 |
| Abrasive Material | Brass |
| Series | 85 Series-For Closed Holes |
| Overall Length | 4 1/2″ |
| Brush Diameter | 0.437″ |
$ 7.06
0.5″ Dia. × 0.5″ Shank × 0.625″ DOC × 2.5″ OAL, APLUS, 3 Flute, Ballnose End Mill
Item #: HS1012317
Brand: Helical Solutions
Model #: 12317
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Length Group | 1D |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Decimal Equivalent | 0.5″ |
| Overall Length (OAL) | 2-1/2″ |
| Measurement Type | Inch |
| Coating | APLUS |
| Shank Length (LS) | 1.875″ |
| Flute Count (NOF) | 3 |
$ 77.72
0.680″ Bore Diameter × 2 1/2″ Hone Length × 18″ Overall Length, 1000/1200 Grit, Levigated Alumina - .68 Cal Flex-Hone for Firearm Chambers
Item #: MJ7301199
Brand: Brush Research
Model #: 01199
| Product Specifications | |
|---|---|
| Type | .68 Cal |
| Hone Length | 2 1/2″ |
| Abrasive Material | Levigated Alumina |
| Overall Length | 18″ |
| Grit | 1000/1200 |
| Specification | Firearm Chambers |
| Bore Diameter | 0.680″ |
$ 58.94
0.680″ Bore Diameter × 2 1/2″ Hone Length × 18″ Overall Length, 800 Grit, Aluminum Oxide - .68 Cal Flex-Hone for Firearm Chambers
Item #: MJ7300461
Brand: Brush Research
Model #: 00461
| Product Specifications | |
|---|---|
| Type | .68 Cal |
| Hone Length | 2 1/2″ |
| Abrasive Material | Aluminum Oxide |
| Overall Length | 18″ |
| Grit | 800 |
| Specification | Firearm Chambers |
| Bore Diameter | 0.680″ |
$ 58.94
0.687″ Diameter × 120 Grit, 5″ OAL, Aluminum Oxide, 85 AY-Abrasive Nylon Brush
Item #: MJ7485AY687120A
Brand: Brush Research
Model #: 85AY687120AO
| Product Specifications | |
|---|---|
| Type | 85 AY-Abrasive Nylon Brush |
| Bristle Diameter | 0.040″ |
| Diameter | 0.687″ |
| Bore Diameter | 0.687″ |
| Stem Diameter | 0.220″ |
| Maximum RPM | 2,000 |
| Abrasive Material | Aluminum Oxide |
| Series | 85 AY-Abrasive Nylon Brush |
| Overall Length | 5″ |
| Brush Diameter | 0.756″ |
| Grit | 120 |
$ 10.74
0.687″ Diameter × 120 Grit, 5″ OAL, Silicon Carbide, 85 AY-Abrasive Nylon Brush
Item #: MJ7485AY687120S
Brand: Brush Research
Model #: 85AY687120SC
| Product Specifications | |
|---|---|
| Type | 85 AY-Abrasive Nylon Brush |
| Bristle Diameter | 0.040″ |
| Diameter | 0.687″ |
| Bore Diameter | 0.687″ |
| Stem Diameter | 0.220″ |
| Maximum RPM | 2,000 |
| Abrasive Material | Silicon Carbide |
| Series | 85 AY-Abrasive Nylon Brush |
| Overall Length | 5″ |
| Brush Diameter | 0.756″ |
| Grit | 120 |
$ 10.74
0.687″ Diameter × 180 Grit, 5″ OAL, Aluminum Oxide, 85 AY-Abrasive Nylon Brush
Item #: MJ7485AY687180A
Brand: Brush Research
Model #: 85AY687180AO
| Product Specifications | |
|---|---|
| Type | 85 AY-Abrasive Nylon Brush |
| Bristle Diameter | 0.035″ |
| Diameter | 0.687″ |
| Bore Diameter | 0.687″ |
| Stem Diameter | 0.220″ |
| Maximum RPM | 2,000 |
| Abrasive Material | Aluminum Oxide |
| Series | 85 AY-Abrasive Nylon Brush |
| Overall Length | 5″ |
| Brush Diameter | 0.756″ |
| Grit | 180 |
$ 10.74
0.687″ Diameter × 180 Grit, 5″ OAL, Silicon Carbide, 85 AY-Abrasive Nylon Brush
Item #: MJ7485AY687180S
Brand: Brush Research
Model #: 85AY687180SC
| Product Specifications | |
|---|---|
| Type | 85 AY-Abrasive Nylon Brush |
| Bristle Diameter | 0.035″ |
| Diameter | 0.687″ |
| Bore Diameter | 0.687″ |
| Stem Diameter | 0.220″ |
| Maximum RPM | 2,000 |
| Abrasive Material | Silicon Carbide |
| Series | 85 AY-Abrasive Nylon Brush |
| Overall Length | 5″ |
| Brush Diameter | 0.756″ |
| Grit | 180 |
$ 10.74