BES 2023 $10+ Products - (25001 Products)
Miniature End Mills - Tapered Rib Cutters - 0.0600″ Cutter Diameter 0.6000″ Length of Cut 7 per side Carbide Tapered Ball End Mill, 3 Flutes
Item #: GE9034460
Brand: Harvey Tool
Model #: 34460
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.06″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Depth of Cut Maximum (APMX) | 0.6″ |
| Coating | Uncoated |
| Flute Count (NOF) | 3 |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 4″ |
| End Shape | Ball Nose |
| Flute Helix Angle (FHA) | 14 Degrees |
| Measurement Type | Inch |
H45AL-C-RN-A-30375-R.020
Item #: HS1082756
Brand: Helical Solutions
Model #: 82756
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Shank Type | Cylindrical |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Corner Radius (RE) | .02″ |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Neck Diameter (DN) | .356″ |
| Overall Length (OAL) | 4″ |
| Neck Length (LN) | 1.125″ |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.375″ |
| Flute Count (NOF) | 3 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 45 Degrees |
| Center Cutting | Yes |
SC FIN 3FL 1/4X1/4X1.3/4X4
Item #: WK402863610
Brand: Widia
Model #: 2863610
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Flute Count (NOF) | 3 |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Flute Helix Angle (FHA) | CW|37 Degrees |
| Depth of Cut Maximum (APMX) | 1-3/4″ |
| Shank Type | Round |
| Overall Length (OAL) | 4″ |
| Usable Length (LU) | 1-3/4″ |
| Cutting Edge Material | Carbide |
| Grade | UNCOATED |
| Coating | Uncoated |
| Decimal Equivalent | 0.25″ |
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.2518MC
Item #: 99356065
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.2518MCProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00001/-0.00001
Blank Number Wire Size
#1
Inner Diameter (Decimal Inch)
0.2518
Calibrated
Yes
Traceability Certification Included
NIST
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.3511MC
Item #: 95263414
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.3511MCProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00001/-0.00001
Blank Number Wire Size
#1
Inner Diameter (Decimal Inch)
0.3511
Calibrated
Yes
Traceability Certification Included
NIST
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
62504 1/2-2F 60D CM ALTIN
Item #: MC2162504
Brand: MTC
Model #: 62504
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Coating | AlTiN |
| Decimal Equivalent | 0.5″ |
| Grade | C-2 Sub-Micron |
| Flute Count (NOF) | 2 |
| End Shape | Included Angle |
| Overall Length (OAL) | 3″ |
| Length Group | Regular |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 60 Degrees |
| Single / Double End | Single End |
| Cutting Edge Material | Solid Tungsten Carbide |
DC 3/8″ x DCONMS 3/8″ x APMX 1-1/8″ x OAL 3″
Item #: CW8056794
Brand: Precision Cutting Tools
Model #: 9581927
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Grade | A5005 Exxtral Carbon (DLC) |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Peripheral Effective Cutting Edge Count (ZEFP) | 2 |
| Depth of Cut Maximum (APMX) | 1-1/8″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 3″ |
| Maximum Feed per Tooth (fz(max)) | 0.0035 ″/tooth |
| Cutting Edge Material | Carbide |
| Minimum Feed per Tooth (fz(min)) | 0.0015 ″/tooth |
| Coating | Ta-C |
| Length Group | Long |
| Flute Count (NOF) | 2 |
| Coolant Supply Property (CSP) | External |
| Flute Helix Angle (FHA) | 45 Degrees |
| Shank Standard | h6 |
| Shank Type | Round |
| Body Material | Carbide |
| End Shape | Corner Radius |
| Decimal Equivalent | 0.375″ |
| Usable Length (LU) | 1-1/8″ |
| Measurement Type | Inch |
| Applicable Material | | Aluminum | Non Ferrous Metals | |
| Series/List # | 224 |
| Application | Finishing | HEM | Semi Finishing | Shouldering |
| Shank Size (SS) | 3/8″ |
| Corner Radius (RE) | 0.06″ |
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.2517MC
Item #: 08727042
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.2517MCProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00001/-0.00001
Blank Number Wire Size
#1
Inner Diameter (Decimal Inch)
0.2517
Calibrated
Yes
Traceability Certification Included
NIST
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.2645MC
Item #: 99803710
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.2645MCProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00001/-0.00001
Blank Number Wire Size
#1
Inner Diameter (Decimal Inch)
0.2645
Calibrated
Yes
Traceability Certification Included
NIST
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
57N808023MT WS15PE EM
Item #: WK403524631
Brand: Widia
Model #: 3524631
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 8 mm |
| Corner Chamfer Width (CHW) | 0.5 mm |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Grade | WS15PE |
| Depth of Cut Maximum (APMX) | 19 mm |
| Neck Diameter (DN) | 7.5 mm |
| Overall Length (OAL) | 76 mm |
| Head Length (LH) | 19 mm |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | AlTiN |
| Style | Finishing |
| Flute Count (NOF) | 5 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 38 Degrees |
| Series/List # | 57N8 |
| Shank Type | Straight | Cylindrical |
| Shank Length (LS) | 37.998 mm |
| End Shape | Radius |
| Cutting Direction (HAND) | Right Hand |
| Usable Length (LU) | 24 mm |
| Single / Double End | Single End |
| Applicable Material | Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium |
57N8080R3TG WS15PE EM
Item #: WK406492822
Brand: Widia
Model #: 6492822
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 8 mm |
| Ramping Angle Maximum (RMPX) | 3 Degrees |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Grade | WS15PE |
| Depth of Cut Maximum (APMX) | 19 mm |
| Neck Diameter (DN) | 7.52 mm |
| Overall Length (OAL) | 76 mm |
| Head Length (LH) | 19 mm |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | AlTiN |
| Body Material | Carbide |
| Flute Count (NOF) | 5 |
| Style | Finishing |
| Flute Helix Angle (FHA) | 38 Degrees |
| Measurement Type | Metric |
| Shank Type | Straight | Cylindrical |
| Series/List # | 57N8 |
| End Shape | Radius |
| Shank Length (LS) | 51.4 mm |
| Usable Length (LU) | 24 mm |
| Cutting Direction (HAND) | Right Hand |
| Applicable Material | Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium |
| Single / Double End | Single End |
| Corner Chamfer Width (CHW) | 0.75 mm |
RH1-.4371.501.50Z4000C4
Item #: IC079589396
Brand: Ingersoll
Model #: 9589396
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.437″ |
| Usable Length (LU) | 1-1/2″ |
| Connection Diameter Machine Side (DCONMS) | 0.438″ |
| Application | Helical Interpolation | Rampdown | Shouldering | Slotting |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Ramping Angle Maximum (RMPX) | 3 Degrees |
| Overall Length (OAL) | 4″ |
| Body Material | Steel |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.437″ |
| Flute Helix Angle (FHA) | 38 Degrees |
| Measurement Type | Inch |
| End Shape | Square |
| Tool Cutting Edge Angle (KAPR) | 90 Degrees |
RE1-.3121.001.00Z5015C3
Item #: IC079589485
Brand: Ingersoll
Model #: 9589485
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.312″ |
| Application | Helical Interpolation | Rampdown | Shouldering |
| Connection Diameter Machine Side (DCONMS) | 0.312″ |
| Ramping Angle Maximum (RMPX) | 1.5 Degrees |
| Depth of Cut Maximum (APMX) | 1″ |
| Body Material | Steel |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.312″ |
| Flute Count (NOF) | 5 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 38 Degrees |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.015″ |
| End Shape | Square |
| Tool Cutting Edge Angle (KAPR) | 90 Degrees |
| Usable Length (LU) | 1″ |
13/32″ × 7/16″ × 1/2″ × 2 3/4″ 4 Flute Square End Carbide End Mill-Plain Shank - Y-Coating
Item #: YG35UGMG53026
Brand: YG-1 Cutting Tools
Model #: UGMG53026
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 13/32″ |
| Shank Type | Plain |
| Connection Diameter Machine Side (DCONMS) | 7/16″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Applicable Material | Stainless Steel | Cast Iron | Super-Alloys / Titanium |
| Overall Length (OAL) | 2-3/4″ |
| Tool Type | 4 Flute Standard Length |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.40625″ |
| Coating | Y-Coating |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Series/List # | UGMG53 |
| Flute Helix Angle (FHA) | 36 Degrees |
8 mm Dia. × 8 mm Shank × 25 mm DOC × 75 mm OAL, Carbide Uncoated, Spiral , 2 Flute, 30° Helix, Ballnose End Mill
Item #: DD9043316
Brand: KYOCERA SGS Precision Tools
Model #: 43316
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 8 mm |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 25 mm |
| Usable Length (LU) | 50 mm |
| Overall Length (OAL) | 75 mm |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Style | Ball Nose |
| Coating | Uncoated |
| Decimal Equivalent | 0.315″ |
0.3 × 4 × 0.5 × 40 mm 2 Flute 0.02mm C/R Carbide End Mill-Plain Shank
Item #: YG346100300202
Brand: YG-1 Cutting Tools
Model #: SEME6100300202
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.3 mm |
| Shank Type | Plain |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 2 mm |
| Usable Length (LU) | 1/2 mm |
| Overall Length (OAL) | 40 mm |
| Corner Radius (RE) | 0.02 mm |
| Cutting Edge Material | Carbide |
| Length Group | Long |
| Flute Count (NOF) | 2 |
| Decimal Equivalent | 0.0118″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Measurement Type | Metric |
0.3 × 4 × 0.5 × 40 mm 2 Flute 0.05mm C/R Carbide End Mill-Plain Shank
Item #: YG34E6100300501
Brand: YG-1 Cutting Tools
Model #: SEME6100300501
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.3 mm |
| Shank Type | Plain |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1 mm |
| Usable Length (LU) | 1/2 mm |
| Overall Length (OAL) | 40 mm |
| Corner Radius (RE) | 0.05 mm |
| Cutting Edge Material | Carbide |
| Length Group | Long |
| Flute Count (NOF) | 2 |
| Decimal Equivalent | 0.0118″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Measurement Type | Metric |
0.3 × 4 × 0.5 × 40 mm 2 Flute 0.05mm C/R Carbide End Mill-Plain Shank
Item #: YG34E6100300502
Brand: YG-1 Cutting Tools
Model #: SEME6100300502
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.3 mm |
| Shank Type | Plain |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 2 mm |
| Usable Length (LU) | 1/2 mm |
| Overall Length (OAL) | 40 mm |
| Corner Radius (RE) | 0.05 mm |
| Cutting Edge Material | Carbide |
| Length Group | Long |
| Flute Count (NOF) | 2 |
| Decimal Equivalent | 0.0118″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Measurement Type | Metric |
4 × 6 × 6 × 60 mm 2 Flute 0.1mm C/R Carbide End Mill-Plain Shank
Item #: YG34E610400114
Brand: YG-1 Cutting Tools
Model #: SEME610400114
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 4 mm |
| Shank Type | Plain |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 14 mm |
| Usable Length (LU) | 6 mm |
| Overall Length (OAL) | 60 mm |
| Corner Radius (RE) | 0.1 mm |
| Cutting Edge Material | Carbide |
| Length Group | Long |
| Flute Count (NOF) | 2 |
| Decimal Equivalent | 0.1575″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Measurement Type | Metric |
4 × 6 × 6 × 60 mm 2 Flute 0.2mm C/R Carbide End Mill-Plain Shank
Item #: YG34E610400216
Brand: YG-1 Cutting Tools
Model #: SEME610400216
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 4 mm |
| Shank Type | Plain |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 16 mm |
| Usable Length (LU) | 6 mm |
| Overall Length (OAL) | 60 mm |
| Corner Radius (RE) | 0.2 mm |
| Cutting Edge Material | Carbide |
| Length Group | Long |
| Flute Count (NOF) | 2 |
| Decimal Equivalent | 0.1575″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Measurement Type | Metric |