BES 2023 $10+ Products - (25001 Products)
VF2XLBR0100N250S04
Item #: MB03424575
Brand: Mitsubishi Materials USA
Model #: 424575
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 2 mm |
| Corner Radius (RE) | 1 mm |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| Neck Diameter (DN) | 1.9 mm |
| Depth of Cut Maximum (APMX) | 1.6 mm |
| Body Half Taper Angle (BHTA) | 12 Degrees |
| Overall Length (OAL) | 70 mm |
| Length Group | Long - Necked |
| Coating | VF |
| End Shape | Ball Nose |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | VF2XLB |
| Usable Length (LU) | 25 mm |
$ 87.36
EM-0.3750D-4F-0.500L-CR
Item #: RJ40XG40012
Brand: Robb Jack
Model #: XG-400-12
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| End Shape | Corner Radius |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Corner Radius (RE) | 0.023″ |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.375″ |
| Coating | AlTiN |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Series/List # | XG-400 |
$ 77.50
6071640 ENDMILL D-L VARI
Item #: WK406071640
Brand: Widia
Model #: 6071640
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Grade | WP15PE |
| Connection Diameter Machine Side (DCONMS) | 0.4803″ |
| Coolant Supply Property (CSP) | External |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Body Material | Carbide |
| Overall Length (OAL) | 1.7165″ |
| Style | Finishing |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlTiN |
| Series/List # | VARIMILL 2 5VCC |
| Flute Count (NOF) | 5 |
| Shank Length (LS) | 0.5905″ |
| Flute Helix Angle (FHA) | 38 Degrees |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Square |
| Single / Double End | Single End |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium |
| Center Cutting | Yes |
$ 88.52
6071666 ENDMILL D-L VARI
Item #: WK406071666
Brand: Widia
Model #: 6071666
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Grade | WP15PE |
| Connection Diameter Machine Side (DCONMS) | 0.4803″ |
| Coolant Supply Property (CSP) | External |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Body Material | Carbide |
| Overall Length (OAL) | 1.7165″ |
| Style | Finishing |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlTiN |
| Series/List # | VARIMILL 2 5VCC |
| Flute Count (NOF) | 5 |
| Shank Length (LS) | 0.5905″ |
| Flute Helix Angle (FHA) | 38 Degrees |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Chamfer |
| Single / Double End | Single End |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium |
| Center Cutting | Yes |
| Corner Chamfer Width (CHW) | 0.02″ |
$ 88.52
RE1-.312.875.875Z7060C25
Item #: IC079590329
Brand: Ingersoll
Model #: 9590329
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.312″ |
| Application | Helical Interpolation | Rampdown | Shouldering |
| Connection Diameter Machine Side (DCONMS) | 0.312″ |
| Ramping Angle Maximum (RMPX) | 1.5 Degrees |
| Depth of Cut Maximum (APMX) | 7/8″ |
| Body Material | Steel |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.312″ |
| Flute Count (NOF) | 7 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 40 Degrees |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.06″ |
| End Shape | Square |
| Tool Cutting Edge Angle (KAPR) | 90 Degrees |
| Usable Length (LU) | 7/8″ |
$ 80.35
RE1-.312.875.875Z7030C25
Item #: IC079590330
Brand: Ingersoll
Model #: 9590330
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.312″ |
| Application | Helical Interpolation | Rampdown | Shouldering |
| Connection Diameter Machine Side (DCONMS) | 0.312″ |
| Ramping Angle Maximum (RMPX) | 1.5 Degrees |
| Depth of Cut Maximum (APMX) | 7/8″ |
| Body Material | Steel |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.312″ |
| Flute Count (NOF) | 7 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 40 Degrees |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.03″ |
| End Shape | Square |
| Tool Cutting Edge Angle (KAPR) | 90 Degrees |
| Usable Length (LU) | 7/8″ |
$ 80.35
RE1-.312.875.875Z7015C25
Item #: IC079590331
Brand: Ingersoll
Model #: 9590331
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.312″ |
| Application | Helical Interpolation | Rampdown | Shouldering |
| Connection Diameter Machine Side (DCONMS) | 0.312″ |
| Ramping Angle Maximum (RMPX) | 1.5 Degrees |
| Depth of Cut Maximum (APMX) | 7/8″ |
| Body Material | Steel |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.312″ |
| Flute Count (NOF) | 7 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 40 Degrees |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.015″ |
| End Shape | Square |
| Tool Cutting Edge Angle (KAPR) | 90 Degrees |
| Usable Length (LU) | 7/8″ |
$ 80.35
RH1-.5001.251.25Z4000W3
Item #: IC079591076
Brand: Ingersoll
Model #: 9591076
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Application | Helical Interpolation | Rampdown | Shouldering | Slotting |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Ramping Angle Maximum (RMPX) | 3 Degrees |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Body Material | Steel |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.5″ |
| Flute Helix Angle (FHA) | 38 Degrees |
| Measurement Type | Inch |
| End Shape | Square |
| Tool Cutting Edge Angle (KAPR) | 90 Degrees |
| Usable Length (LU) | 1-1/4″ |
$ 80.56
REB-.3121.001.00Z6156C3
Item #: IC079589990
Brand: Ingersoll
Model #: 9589990
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.312″ |
| Usable Length (LU) | 1″ |
| Connection Diameter Machine Side (DCONMS) | 0.312″ |
| Application | | Helical Interpolation | Rampdown | Shouldering | |
| Depth of Cut Maximum (APMX) | 1″ |
| Corner Radius (RE) | 0.156″ |
| Overall Length (OAL) | 3″ |
| Body Material | Steel |
| Flute Count (NOF) | 6 |
| Decimal Equivalent | 0.312″ |
| Flute Helix Angle (FHA) | 38 Degrees |
| Measurement Type | Inch |
$ 80.35
H45AL-C-SR-30500-R.010
Item #: HS1082730
Brand: Helical Solutions
Model #: 82730
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Flute Helix Angle (FHA) | 45 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Shank Type | Cylindrical |
| Depth of Cut Maximum (APMX) | 1″ |
| Corner Radius (RE) | .01″ |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.5″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Center Cutting | Yes |
$ 78.11
HEV-C-S-70375-R.020
Item #: HS1082913
Brand: Helical Solutions
Model #: 82913
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Flute Count (NOF) | 7 |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Shank Type | Cylindrical |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Corner Radius (RE) | .02″ |
| Overall Length (OAL) | 2″ |
| Decimal Equivalent | 0.375″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
$ 77.81
HSV-M-40375-BN
Item #: HS1083294
Brand: Helical Solutions
Model #: 83294
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Corner Radius (RE) | 0.188″ |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| End Shape | Ball |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.375″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TPLUS |
| Center Cutting | Yes |
$ 80.98
3/8″ Dia. × 3/8″ Shank × 1/2″ DOC × 2-1/2″ OAL, Carbide FC18, 4 Flute, Variable Helix, Round, External , Ballnose End Mill
Item #: FT8534928
Brand: Fullerton Tool
Model #: 34928
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Flute Helix Angle (FHA) | Variable |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Shank Type | Round |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Tool Type | Center Cut|Single-End |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | Short|Stub |
| Cutting Edge Material | Carbide |
| End Shape | Ball |
| Coating | FC18 |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.375″ |
$ 46.99
Chamfer Cutters - 0.5000″ (1/2″) Shank Diameter × 25° per side Carbide Flat Chamfer Cutter, 4 Flutes
Item #: GE9018325
Brand: Harvey Tool
Model #: 18325
| Product Specifications | |
|---|---|
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Flute Helix Angle (FHA) | 50 Degrees |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 0.456″ |
| Coating | Uncoated |
| Overall Length (OAL) | 3″ |
| End Shape | Flat |
$ 84.64
End Mills for Plastics - 2 Flute - 0.2500″ (1/4″) Cutter Diameter × 1.2500″ (1-1/4″) Length of Cut Carbide Square Upcut End Mill for Plastic, 2 Flutes, Amorphous Diamond Coated
Item #: GE9049916C4
Brand: Harvey Tool
Model #: 49916-C4
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Applicable Material | Other Non-Metallic Materials |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.25″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Amorphous Diamond |
$ 81.98
1/32″ Dia. × 1/8″ Shank × 3/64″ DOC × 2-1/2″ OAL, Carbide DLC, Stub , 3 Flute, Ballnose End Mill
Item #: GE90970731C4
Brand: Harvey Tool
Model #: 970731-C4
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/32″ |
| Usable Length (LU) | 0.565″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Length Group | 8D |
| Depth of Cut Maximum (APMX) | 3/64″ |
| End Shape | Ball Nose |
| Overall Length (OAL) | 2-1/2″ |
| Flute Type | Stub |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.03125″ |
| Coating | DLC |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
$ 83.31
1/32″ Dia. × 1/8″ Shank × 0.046″ DOC × 2-1/2″ OAL, Carbide DLC, Stub , 3 Flute, Ballnose End Mill
Item #: GE9059431C4
Brand: Harvey Tool
Model #: 59431-C4
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/32″ |
| Usable Length (LU) | 5/8″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Length Group | 20D |
| Depth of Cut Maximum (APMX) | 0.046″ |
| End Shape | Ball Nose |
| Overall Length (OAL) | 2-1/2″ |
| Flute Type | Stub |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.03125″ |
| Coating | DLC |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
$ 83.31
0.04″ Dia. × 1/8″ Shank × 0.06″ DOC × 2-1/2″ OAL, Carbide DLC, Stub , 3 Flute, Ballnose End Mill
Item #: GE9059440C4
Brand: Harvey Tool
Model #: 59440-C4
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.04″ |
| Usable Length (LU) | 0.8″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Length Group | 20D |
| Depth of Cut Maximum (APMX) | 0.06″ |
| End Shape | Ball Nose |
| Overall Length (OAL) | 2-1/2″ |
| Flute Type | Stub |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.04″ |
| Coating | DLC |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
$ 83.31
.015 D × 8 DEG CARB
Item #: GE90995415
Brand: Harvey Tool
Model #: 995415
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/64″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Depth of Cut Maximum (APMX) | 0.15″ |
| Coating | Uncoated |
| Flute Count (NOF) | 3 |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Square |
| Flute Helix Angle (FHA) | 16 Degrees |
| Measurement Type | Inch |
$ 82.60
Undercutting End Mills - 0.0312″ (1/32″) Cutter Diameter × 0.1250″ (1/8″) Neck Length × 270° Carbide Undercutting End Mill, 2 Flutes, AlTiN Coated
Item #: GE9054631C3
Brand: Harvey Tool
Model #: 54631-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/32″ |
| Usable Length (LU) | 0.151″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 1/64″ |
| Depth of Cut Maximum (APMX) | 0.027″ |
| Neck Length (LN) | 1/8″ |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Spherical |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.03125″ |
| Coating | AlTiN |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
$ 82.69