BES 2023 $10+ Products - (25001 Products)
MP2XLBR0030N120
Item #: MB03830346
Brand: Mitsubishi Materials USA
Model #: 830346
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.6 mm |
| Corner Radius (RE) | 0.3 mm |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| Neck Diameter (DN) | 0.57 mm |
| Depth of Cut Maximum (APMX) | 0.45 mm |
| Body Half Taper Angle (BHTA) | 12 Degrees |
| Overall Length (OAL) | 50 mm |
| Length Group | Long - Necked |
| Coating | MS+ |
| End Shape | Ball Nose |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | MP2XLB |
| Usable Length (LU) | 12 mm |
$ 75.44
MP2XLBR0100N300
Item #: MB03831322
Brand: Mitsubishi Materials USA
Model #: 831322
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 2 mm |
| Corner Radius (RE) | 1 mm |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| Neck Diameter (DN) | 1.94 mm |
| Depth of Cut Maximum (APMX) | 1.5 mm |
| Body Half Taper Angle (BHTA) | 12 Degrees |
| Overall Length (OAL) | 80 mm |
| Length Group | Long - Necked |
| Coating | MS+ |
| End Shape | Ball Nose |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | MP2XLB |
| Usable Length (LU) | 30 mm |
$ 75.44
MP2XLBR0125N200
Item #: MB03831402
Brand: Mitsubishi Materials USA
Model #: 831402
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 2.5 mm |
| Corner Radius (RE) | 1.25 mm |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| Neck Diameter (DN) | 2.4 mm |
| Depth of Cut Maximum (APMX) | 1.9 mm |
| Body Half Taper Angle (BHTA) | 12 Degrees |
| Overall Length (OAL) | 55 mm |
| Length Group | Long - Necked |
| Coating | MS+ |
| End Shape | Ball Nose |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | MP2XLB |
| Usable Length (LU) | 20 mm |
$ 75.44
MP2XLBR0175N250
Item #: MB03831568
Brand: Mitsubishi Materials USA
Model #: 831568
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3.5 mm |
| Corner Radius (RE) | 1.75 mm |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Neck Diameter (DN) | 3.4 mm |
| Depth of Cut Maximum (APMX) | 2.6 mm |
| Body Half Taper Angle (BHTA) | 12 Degrees |
| Overall Length (OAL) | 65 mm |
| Length Group | Long - Necked |
| Coating | MS+ |
| End Shape | Ball Nose |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | MP2XLB |
| Usable Length (LU) | 25 mm |
$ 75.44
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.2314MC
Item #: 97876411
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.2314MC
Product Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00001/-0.00001
Blank Number Wire Size
#1
Inner Diameter (Decimal Inch)
0.2314
Calibrated
Yes
Traceability Certification Included
NIST
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
$ 368.16
15258 3/4X3/4X1-5/8X3-7/8
Item #: CR1015258
Brand: Melin Tool Co
Model #: 15258
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Corner Radius (RE) | 0.045″ |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Tool Type | General Purpose |
| Overall Length (OAL) | 3-7/8″ |
| Decimal Equivalent | 0.75″ |
| Cutting Edge Material | HSS M42 |
| Series/List # | CC |
$ 72.62
45512 1/2X1/2X1-5/8X3-5/8
Item #: CR1045512
Brand: Melin Tool Co
Model #: 45512
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Coating | TiCN |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Flute Count (NOF) | 4 |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Tool Type | General Purpose |
| Overall Length (OAL) | 3-5/8″ |
| Decimal Equivalent | 0.5″ |
| Cutting Edge Material | HSS M42 |
| Series/List # | CRFP |
$ 72.77
6071179 ENDMILL D-L VARI
Item #: WK406071179
Brand: Widia
Model #: 6071179
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Grade | WP15PE |
| Connection Diameter Machine Side (DCONMS) | 0.3593″ |
| Coolant Supply Property (CSP) | External |
| Depth of Cut Maximum (APMX) | 9/16″ |
| Body Material | Carbide |
| Overall Length (OAL) | 1.3346″ |
| Style | Finishing |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlTiN |
| Series/List # | VARIMILL 1 4XC5 |
| Flute Count (NOF) | 4 |
| Shank Length (LS) | 0.4921″ |
| Flute Helix Angle (FHA) | 38 Degrees |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Square |
| Single / Double End | Single End |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium |
| Center Cutting | Yes |
$ 77.31
RE1-.3751.001.00Z5000W25
Item #: IC079590695
Brand: Ingersoll
Model #: 9590695
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Usable Length (LU) | 1″ |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Application | Helical Interpolation | Rampdown | Shouldering |
| Depth of Cut Maximum (APMX) | 1″ |
| Ramping Angle Maximum (RMPX) | 1.5 Degrees |
| Overall Length (OAL) | 2-1/2″ |
| Body Material | Steel |
| Flute Count (NOF) | 5 |
| Decimal Equivalent | 0.375″ |
| Flute Helix Angle (FHA) | 38 Degrees |
| Measurement Type | Inch |
| End Shape | Square |
| Tool Cutting Edge Angle (KAPR) | 90 Degrees |
$ 69.85
HSV-M-40312-BN
Item #: HS1083290
Brand: Helical Solutions
Model #: 83290
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Corner Radius (RE) | 0.156″ |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| End Shape | Ball |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.3125″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TPLUS |
| Center Cutting | Yes |
$ 68.51
HEV-S-50375-R.010
Item #: HS1082990
Brand: Helical Solutions
Model #: 82990
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Shank Type | Cylindrical |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Corner Radius (RE) | .01″ |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Decimal Equivalent | 0.375″ |
| Overall Length (OAL) | 2″ |
| Measurement Type | Inch |
| Cutting Edge Material | Carbide |
| Center Cutting | Yes |
| Flute Count (NOF) | 5 |
$ 67.62
5/32″ Dia. × 3/16″ Shank × 15/64″ DOC × 3″ OAL, Carbide TiB2, Stub , 3 Flute, Ballnose End Mill
Item #: GE9054510C8
Brand: Harvey Tool
Model #: 54510-C8
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/32″ |
| Usable Length (LU) | 1-1/4″ |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Applicable Material | Aluminum / Non-Ferrous Materials |
| Depth of Cut Maximum (APMX) | 15/64″ |
| Length Group | 8D |
| Overall Length (OAL) | 3″ |
| End Shape | Ball Nose |
| Cutting Edge Material | Carbide |
| Flute Type | Stub |
| Coating | TiB2 |
| Decimal Equivalent | 0.15625″ |
| Flute Count (NOF) | 3 |
| Measurement Type | Inch |
$ 71.99
T6-200-02.5 0.0781-IN DIA
Item #: RJ40T6200025
Brand: Robb Jack
Model #: T6-200-02.5
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/64″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 5/32″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.0781″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Series/List # | T6-200 |
$ 67.40
T6-200-03.5 0.1093-IN DIA
Item #: RJ40T6200035
Brand: Robb Jack
Model #: T6-200-03.5
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7/64″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 3/16″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.1093″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Series/List # | T6-200 |
$ 67.40
T6-400-02.5 0.078125-IN D
Item #: RJ40T6400025
Brand: Robb Jack
Model #: T6-400-02.5
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/64″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 5/32″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.078125″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Series/List # | T6-400 |
$ 67.40
T6-400-03.5 0.109375-IN D
Item #: RJ40T6400035
Brand: Robb Jack
Model #: T6-400-03.5
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7/64″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 3/16″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.109375″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Series/List # | T6-400 |
$ 67.40
EM-0.2500D-2F-0.2500L-T-BN-A
Item #: RJ40DM20108
Brand: Robb Jack
Model #: DM-201-08
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Corner Radius (RE) | 1/8″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Tool Type | Solid Carbide Endmill |
| Depth of Cut Maximum (APMX) | 1/4″ |
| End Shape | Ball |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.25″ |
| Coating | AlTiN |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Series/List # | DM-201 |
| Flute Helix Angle (FHA) | 30 Degrees |
$ 67.25
MDM-06.00D-2F-06.00L-T-BN
Item #: RJ40MDM20106
Brand: Robb Jack
Model #: MDM-201-06
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Corner Radius (RE) | 3 mm |
| Depth of Cut Maximum (APMX) | 6 mm |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 75 mm |
| End Shape | Ball |
| Coating | AlTiN |
| Measurement Type | Metric |
| Flute Count (NOF) | 2 |
| Series/List # | MDM-201 |
$ 67.25
EM-0.2500D-2F-0.2500L-T-CR
Item #: RJ40TM20108
Brand: Robb Jack
Model #: TM-201-08
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| End Shape | Torus |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Corner Radius (RE) | 0.04″ |
| Depth of Cut Maximum (APMX) | 1/4″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.25″ |
| Coating | AlTiN |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Series/List # | TM-201 |
| Flute Helix Angle (FHA) | 30 Degrees |
$ 67.25
1/16 2FL SC DBL END ENDMILL
Item #: RJ40T620002
Brand: Robb Jack
Model #: T6-200-02
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 1/8″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.0625″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Series/List # | T6-200 |
$ 67.40