ET01 and ET02 - (25001 Products)
Air-Operated 5C Collet Holder - 5C Collet Style
Item #: JM50A05C
Manufacturer: Kalamazoo
Mfg #: A05C
Technical Specifications:
*Brand Name: Kalamazoo
*Collet Style: 5C
*Type: Air-Operated 5C Collet Holder
*Weight: 7 lbs
Description:
*Versatile
*Accurate
*Hardened and ground spindle
*Collets held dead length
*Two position
*For drill presses, milling machines and grinders
*Dimensions: 3-1/2"H x 4-3/4"D x 2-1/2" base to center line
Shipping Info:
*Actual Weight - 7.3480
*Dimensions - Height: 5.00 Length: 7.50 Width: 7.25
Horizontal/Vertial Angle Collet Fixture - 5C Collet Style
Item #: JN50MSR1
Manufacturer: Quality Import
Mfg #:
Technical Specifications:
*Brand Name: Quality Import
*Collet Style: 5C
*Overall Height: 3-3/4
*Type: Horizontal/Vertical Angle Collet Fixture
Description:
*Angle Collet Fixture
*Uses Standard 5C Collets
*All moving parts hardened, ground and honed
*Collet does not move up or down
*Retains positive relation to the base
*Can be adjusted or changed without disturbing your set-up
*For drilling, milling, grinding, tapping assembly, etc
*A must for every machine shop
*Height 3-3/4"
Shipping Info:
*Actual Weight - 10.4500
*Dimensions - Height: 4.40 Length: 7.30 Width: 4.50
1 Degree 5C Indexing Spin Jig -- #SJ5C; 5C Collet Style
Item #: MW50SJ5C
Manufacturer: World Class Quality
Mfg #:
Technical Specifications:
*Brand Name: World Class Quality
*Capacity: 1-1/8
*Collet Style: 5C
*Spindle TIR: .0005
*Type: 1 Degree 5C Indexing Spin Jig
Description:
*5C Indexing Spin Jig
*A multi-purpose machine indexing fixture designed to extend work capabilities of surface grinders, drill presses and all types of milling machines
*Plate is graduated by degrees to 360°
*Vernier to 10 min. accuracy .0005 ground lapped; 2" travel for flute grinding
*Standard 5C collets
*Capacity 1-1/8"
*Simple 1° indexing
*Spindle lock
*Hardened and ground spindle
*Spindle lock hole for tightening collet
*Index plate has 36 hole circle
Shipping Info:
*Actual Weight - 12.4000
*Dimensions - Height: 6.80 Length: 11.3 Width: 7.40
Master Grind Collet Fixture; 5C Collet Style; with Tool Base Plate and Tailstock for Master Grind
Item #: NJ50MG5CVS1WBTS
Manufacturer: Suburban
Mfg #: MG5CVS1WBT
Technical Specifications:
*Base: 4 x 5
*Brand Name: Suburban
*Capacity: 1-1/4
*Center Height: 3
*Collet Style: 5C
*Overall Height: 5-1/2
*Spindle TIR: .00005
*Type: Master Grind Collet Fixture with Base Plate and Tailstock
*Weight: 54 lbs
Description:
*Twin-Dex combination 5C collet and V-block in one fixture
*Horizontal or vertical V-block mounting
*72-Position index plate for hard index every five degrees ±15 arc seconds
*Two heavy duty 4" diameter tapered roller bearings in spindle
*Extra large 1-5/8" V-block capacity
*Built-in sine bar for setting angles between hard index locations
*Square and parallel within .0002"
*Maximum spindle runout .00005"
*Sine set compatible
*Fitted wooden case included
*Model MG5CVS1WBTS Master Grind, fitted base and tailstock complete
Shipping Info:
*Actual Weight - 70.0000
*Dimensions - Height: 13.0 Length: 23.0 Width: 13.0
Grind-All Fixture Number 1 -- #010-100
Item #: NJ60010100
Manufacturer: Harig
Mfg #: 010-100
Technical Specifications:
*Brand Name: Harig
*Capacity: 1-1/4
*Center Height: 3
*Spindle TIR: .0001
*Type: Grind-All Fixture Number 1
*Weight: 12 lbs
Description:
*Harig "World Famous" Grind-All No. 1 Fixture
*Grinds various shaped punches up to1-1/4" diameter
*Built for high precision work within ±.0001
*Radii generated with sliding V-block
*Multi-sides produced with 24 division index
*Constructed of hardened tool steel, with critical internal parts protected from grinding dust for long-lasting, accurate performance
*Complete with carrying case, work-holding V-block and 24 division indexing plate
Shipping Info:
*Actual Weight - 17.1500
*Dimensions - Height: 9.10 Length: 10.4 Width: 8.80
Motorized Cylindrical Grinding Fixture -- #025-100
Item #: NJ60025100
Manufacturer: Harig
Mfg #: 025-100
Technical Specifications:
*Brand Name: Harig
*Type: Motorized Cylindrical Grinding Fixture
*Weight: 20 lbs
Description:
*Lectric-Center Motorized Cylindrical Grinding Fixture
*For external grinding on a surface grinder
*Quickly converts a surface grinder for cylindrical grinding applications and can also be used for critical inspection.
*The Dead Center design permits extremely close accuracies down to 50 millionths and less to be easily obtained
*Can be mounted directly on magnetic chuck or onto the optional 4"x 6" sine plate (Order No. NJ60-055100)
*Completely motorized for ease of stock removal
*Complete with diamond holder for wheel dressing, interchangeable male and female centers, adjustable headstock & tailstock and carrying case
*Specifications: Swing: 6"
*Center distance: 7"
*Center height: 3"
*Accuracy: 0.000050 TIR
*Motor: 115Volt/1 Phase
*Speeds: 180 & 360 RPM
*Net weight: 20 lbs.
Shipping Info:
*Actual Weight - 25.0000
Master Grind Collet Fixture -- #MG5CVS1; 5C Collet Style
Item #: NJ50MG5CVS1
Manufacturer: Suburban
Mfg #: MG-5CV-S1
Technical Specifications:
*Base: 4 x 5
*Brand Name: Suburban
*Capacity: 1-1/4
*Center Height: 3
*Collet Style: 5C
*Overall Height: 5-1/2
*Spindle TIR: .00005
*Type: Master Grind Collet Fixture
*Weight: 32 lbs
Description:
*Twin-Dex combination 5C collet and V-block in one fixture
*Horizontal or vertical V-block mounting
*72-Position index plate for hard index every five degrees ±15 arc seconds
*Two heavy duty 4" diameter tapered roller bearings in spindle
*Extra large 1-5/8" V-block capacity
*Built-in sine bar for setting angles between hard index locations
*Square and parallel within .0002"
*Maximum spindle runout .00005"
*Sine set compatible
*Fitted wooden case included
*Model MG5CVS1WBTS Master Grind, fitted base and tailstock complete
Shipping Info:
*Actual Weight - 28.1500
*Dimensions - Height: 10.8 Length: 14.3 Width: 10.5
Ultra-Dex Collet Fixture -- #070-100; 5C or 5ST Collet Style
Item #: NJ60070100
Manufacturer: Harig
Mfg #: 070-100
Technical Specifications:
*Brand Name: Harig
*Center Height: 3
*Collet Style: 5C or 5ST
*Type: Ultra-Dex Collet Fixture
*Weight: 10.5 lbs
Description:
*Uni-Dex Ultra Precise Collet Fixture
*Hardened and ground throughout, its integral preloaded ball and race bearing, and 24 division index arrangement delivers extreme positioning accuracy and precision
*Magnetic chuck, face plate and 3-jaw chuck accessories
*Comes with carrying case
*Specifications: Runout with 5-C collet - 0.000050
*Index accuracy: ±10 seconds
*Center height: 3"
*Thru hole: 1-1/4"
*Index divisions: 24
*Collet type: 5C & 5ST
*3-Jaw chuck hole: 3/4"
*Weight: 10-1/2 lbs.
Shipping Info:
*Actual Weight - 15.0000
Motorized Spin Indexer -- #120100; 5C Collet Style
Item #: NJ60120100
Manufacturer: Harig
Mfg #: 120-100
Technical Specifications:
*Brand Name: Harig
*Center Height: 4-1/8
*Collet Style: 5C
*Type: Motorized Spin Indexer
*Weight: 17 lbs
Description:
*Motorized 5C Spin Indexer
*Sturdy and dimensionally stable cast iron housing.
*Large preloaded ball bearings are durable and accurate - ideal for motorization.
*5C collet holder ground in assembly to under 0.0001 runout.
*24 Division index plate with precision index pins locks in every 15° to /- 30 seconds
*Draw sleeve for quick set-ups of collets and accessories.
*Extended base for minimal deflection even with heavier parts.
*1/4 Diameter mounting hole on top of housing for diamond dresser.
*Collet: 5C up to 1
*24 division indexing: /- 30 seconds
*Spindle runout: 0.00001
*Spindle parallel to base: 0.0002 in 6
*Motor: 1/15HP 110V AC
*Variable speed: 50-450 RPM
Shipping Info:
*Actual Weight - 25.8500
*Dimensions - Height: 8.50 Length: 14.5 Width: 11.2
Horizontal/Vertical 5C Indexing Fixture
Item #: JJ55004
Manufacturer: Quality Import
Mfg #:
Technical Specifications:
*Base: 4 x 8 Horiz; 4 x 6 Vert
*Brand Name: Quality Import
*Center Height: 4
*Collet Style: 5C
*Overall Height: 7-3/4 Horiz; 8 Vert
*Type: Horizontal/Vertical 5C Indexing Fixture
*Weight: 30 lbs
Description:
*5C Collet Horizontal/Vertical Indexing Fixture
*A rapid indexing fixture for use with both Collets (5C 1-1/8" capacity) and lathe chucks
*The latter may be fitted to the 2-1/4-8 threaded spindle
*Fixtures are designed to be mounted vertically or horizontally
*Indexing is accomplished by releasing the spring loaded index pin lever
*The spindle rotates freely until the next open space when the index pin engages again and locks the spindle
*Possible divisions are: 2, 3, 4, 6, 8, 12 and 24
Shipping Info:
*Actual Weight - 30.6000
*Dimensions - Height: 9.70 Length: 11.5 Width: 9.90
Collet Master -- #CM5C; 5C Collet Style
Item #: NJ50CM5C
Manufacturer: Suburban
Mfg #: CM5C
Technical Specifications:
*Base: 3-3/4 x 3-1/2
*Brand Name: Suburban
*Capacity: 1-1/8
*Center Height: 3-5/8
*Collet Style: 5C
*Overall Height: 5-1/2
*Spindle TIR: .0001
*Type: Collet Master
*Weight: 9 lbs
Description:
*Collet Master
*Uses all standard 5C Collets
*48 position index plate provides a hard stop every 7-1/2°
*Drawbar and fitted wooden case included
*Two sealed, preloaded ball bearings in spindle
*Hardened and ground base is held square and parallel to spindle.
*1-1/8" Through hole
*Optional face plate and V-block for eccentric forms available
*Indexing accuracy ± 45 sec.
Shipping Info:
*Actual Weight - 13.3000
*Dimensions - Height: 10.7 Length: 10.6 Width: 10.4
Grind-All Fixture Base Plate & Tailstock -- #015-100
Item #: NJ60015100
Manufacturer: Harig
Mfg #: 015-100
Technical Specifications:
*Brand Name: Harig
*Type: Grind-All Fixture Base Plate & Tailstock
Description:
*11" long for grinding long & thin parts
Shipping Info:
*Actual Weight - 20.0000
Manual Spin Indexer -- #122100; 5C Collet Style
Item #: NJ60122100
Manufacturer: Harig
Mfg #: 122-100
Technical Specifications:
*Brand Name: Harig
*Center Height: 4-1/8
*Collet Style: 5C
*Type: Manual Spin Indexer
*Weight: 17 lbs
Description:
*Also available Manual 5C Spin Indexer
*Sturdy and dimensionally stable cast iron housing.
*Large preloaded ball bearings are durable and accurate - ideal for motorization.
*5C collet holder ground in assembly to under 0.0001 runout.
*24 Division index plate with precision index pins locks in every 15° to /- 30 seconds
*Draw sleeve for quick set-ups of collets and accessories.
*Extended base for minimal deflection even with heavier parts.
*1/4 Diameter mounting hole on top of housing for diamond dresser.
*Collet: 5C up to 1
*24 division indexing: /- 30 seconds
*Spindle runout: 0.00001
*Spindle parallel to base: 0.0002 in 6
*Motor: 1/15HP 110V AC
*Variable speed: 50-450 RPM
Shipping Info:
*Actual Weight - 17.0000
Grind-All Fixture Magnetic Chuck Accessory -- #1040
Item #: NJ601040
Manufacturer: Harig
Mfg #: 10-40
Technical Specifications:
*Brand Name: Harig
*Type: Grind-All Fixture Magnetic Chuck Accessory
Description:
*4 Magnetic chuck
Shipping Info:
*Actual Weight - 10.0000
MULTICLAMP50E/F Other Unique Holder
Item #: TG604504538
Manufacturer: Tungaloy
Mfg #: 4504538
Technical Specifications:
*Brand Name: Tungaloy
Description:
Shipping Info:
Mini-Master Index Fixture -- #MM25R; ER25 Collet Style
Item #: NJ50MM25R
Manufacturer: Suburban
Mfg #: MM25R
Technical Specifications:
*Brand Name: Suburban
*Collet Style: ER25
*Spindle TIR: .0002
*Type: Mini-Master Index Fixture
*Weight: 4 lbs
Description:
*3" Height is ideal for small machine setups
*Weight only 4 pounds for easy handling
*72-Position index plate allows an index every 5°
*5/8" Through hole in spindle
*Uses standard ER-25 spring collets
*Spindle runs in two sealed preloaded bearings
*Maximum spindle runout .0002"
*Spindle can be secured by stop button for easy tightening of collets
*Hardened steel base plate is ground square and parallel with spindle axis within .0002"
*Fitted wooden case and collet wrench included
Shipping Info:
*Actual Weight - 4.0000
*Dimensions - Height: 7.00 Length: 9.00 Width: 9.00
Base Plate and Tailstock for Master Grind -- #MG5BTS
Item #: NJ50MG5BTS
Manufacturer: Suburban
Mfg #: MG5BTS
Technical Specifications:
*Brand Name: Suburban
*Type: Base Plate and Tailstock for Master Grind
*Weight: 22 lbs
Description:
*Base plate and tailstock: tailstock has 1/2" diameter spring loaded center and lock screw
*Includes 1/2" 5C collet and steel center to be used in Order No. MG5CVS1 spindle
*Base plate and edge guide are hardened and ground
Shipping Info:
*Actual Weight - 36.0000
*Dimensions - Height: 9.00 Length: 23.0 Width: 11.0
MULTICLAMP63E/F Other Unique Holder
Item #: TG604504539
Manufacturer: Tungaloy
Mfg #: 4504539
Technical Specifications:
*Brand Name: Tungaloy
Description:
Shipping Info:
Grind-All Fixture 4 x 6 Sine Accessory -- #055-100
Item #: NJ60055100
Manufacturer: Harig
Mfg #: 055-100
Technical Specifications:
*Brand Name: Harig
*Type: Grind-All Fixture 4 x 6 Sine Accessory
Description:
*4 x 6 Sine plate
*For grinding parts with tapers
Shipping Info:
*Actual Weight - 14.0000
Face Plate & Vee Block for Collet Master -- #CM5CFVB
Item #: NJ50CM5CFPVB
Manufacturer: Suburban
Mfg #: CM5CFVB
Technical Specifications:
*Brand Name: Suburban
*Description: Face Plate and V-block accessory with case
*Type: Face Plate & Vee Block for Collet Master
Description:
*Face Plate and V-block Accessory for Collet Master
*Case Included
Shipping Info:
*Actual Weight - 15.0000
*Dimensions - Height: 11.0 Length: 11.0 Width: 11.0