ET01 and ET02 - (25001 Products)
Dead Center With Nut MT4 T.I.R. 0.0002"
Item #: HK313545004P
Manufacturer: TMX
Mfg #: 3-545-004P
Technical Specifications:
*Accuracy: .0002
*Brand Name: TMX
*Description: Morse Taper
*Model Number: 3-545-004P
*Mount: 4 MT
*Overall Length: 6.89
*Point Diameter: .55
*Point Length: 2.45
*Point Style: Alloy Steel
*Shank Diameter: 1.24
*Threads: M36 x 1.5 Nut
*Type: Dead Center w Nut
Description:
*T.I.R. 0.0002"
*Case hardened to 61-63HRC
*Threaded and provided with the nut to remove the center from a tailstock
Shipping Info:
*Actual Weight - 2.4300
Blue Tilting Drum Ring - 55 Gallon - 1200 Lifting Capacity
Item #: RV54TDR55
Manufacturer: Vestil
Mfg #: TDR-55
Technical Specifications:
•Acceptable Drum Styles: 55 Gallon Steel
•Brand Name: Vestil
•Description: 55 Gallon Blue
•Fork Opening: 5-3/4 x 3
•Holding Device: Fork Truck
•Lifting Capacity: 1200 lbs
•Lifting Position: Vertical
•Material: Steel
•Type: Drum Lifter
Description:
•Easily transport steel drums with your fork truck
•Manually rotate drum to dispense light materials
•The band secures around the belly of the drum
•Welded steel construction for durable strength
•Capacity 1200 lbs
•Capacity is based on full drums / half-full drums are rated at 600 lbs
Shipping Info:
•Actual Weight - 24.1500
•Dimensions - Height: 3.25 Length: 36.5 Width: 25.0
11/16" Size of Sq - Sq End Lathe Chuck Wrench
Item #: HF70688500A
Manufacturer: H & R
Mfg #: HR-11/16SQ
Technical Specifications:
*Brand Name: H & R
*Handle Diameter: 3/4
*Handle Length: 18
*Head Length: 5
*Size of Square: 11/16
*Type: Square End Lathe Chuck Wrench
Description:
*Square End Chuck Wrench with Handle
*Handle lengths are designed for maximum twisting load
*WARRANTY IS VOID if handle extension (Cheater Pipe) is used or has been used with wrenches and/or any modification made to wrench
Shipping Info:
*Actual Weight - 5.0000
*Dimensions - Height: 2.50 Length: 17.5 Width: 2.50
1 Degree 5C Indexing Spin Jig -- #SJ5C; 5C Collet Style
Item #: MW50SJ5C
Manufacturer: World Class Quality
Mfg #:
Technical Specifications:
*Brand Name: World Class Quality
*Capacity: 1-1/8
*Collet Style: 5C
*Spindle TIR: .0005
*Type: 1 Degree 5C Indexing Spin Jig
Description:
*5C Indexing Spin Jig
*A multi-purpose machine indexing fixture designed to extend work capabilities of surface grinders, drill presses and all types of milling machines
*Plate is graduated by degrees to 360°
*Vernier to 10 min. accuracy .0005 ground lapped; 2" travel for flute grinding
*Standard 5C collets
*Capacity 1-1/8"
*Simple 1° indexing
*Spindle lock
*Hardened and ground spindle
*Spindle lock hole for tightening collet
*Index plate has 36 hole circle
Shipping Info:
*Actual Weight - 12.4000
*Dimensions - Height: 6.80 Length: 11.3 Width: 7.40
CLAMPING NUT STUB 1-1/4
Item #: EH704502327
Manufacturer:
Mfg #:
Technical Specifications:
Description:
Shipping Info:
Acu-Rite 28" Backup Spar for SENC-150 (385128000)
Item #: MS31385128000
Manufacturer: Acu-Rite
Mfg #: 385128000
Technical Specifications:
•Brand Name: Acu-Rite
•Description: Backup Spar
•Series: SENC-150
•Travel: 28
Description:
•SENC 150 PRECISION GLASS SCALES: The SENC 150 precision glass scale, designed to satisfy a wide range of application needs, incorporates the latest innovation in roller bearing technology for reduced backlash and greater scale travel life
•It also features a highly integrated scanning sensor that provides superior contamination resistance
•Scales 65" and over include Backup Spars
•Scales over 42" may require Extension Cables
•Note total overall scale length equals measuring length plus 6.375" (161.9mm). Actual Travel is 1-3/4" Longer than the Measuring Length. Except the 32" scale which has a total travel of only 31.125".
Features:
•Resolutions of .00005" (1µm) and .0002" (5µm)
•Travel lengths from 2" - 120"
•Reader Head and Armor Cable
•Vinyl cable available
•Flexible mounting features
•Position-Trac™ Home Reference System
•2 Year Warranty
Shipping Info:
•Actual Weight - 2.2000
Vise Accessory - Speed Handle; For Use On: 6" Milling Machine Vises
Item #: NB80Z9021
Manufacturer: Generic USA
Mfg #: Z9021
Technical Specifications:
*Brand Name: Generic USA
*For Use With: Speed Handle
*Type: Speed Handle
Description:
*Speed Handle
*Replaces swivel handle in Kurt AngLock, Eron Lock-Tight Vise and other Milling Machine Vises
*Machined aluminum
Shipping Info:
*Actual Weight - 1.0500
*Dimensions - Height: 2.40 Length: 5.70 Width: 3.40
#52-470-010 - 1/64 to 1/2" - 26 Pieces - Radius Gage Set
Item #: NA5552470010
Manufacturer: Fowler
Mfg #: 52-470-010
Technical Specifications:
•Brand Name: Fowler
•Model Number: 52-470-010
•Number of Pieces: 26
•Size: 1/64 to 1/2
•Type: Radius Gage Set
Description:
•Check radius, concave and convex work.
•Non-rust steel, precision ground.
•Used for inspection, layout, pattern making and other machining jobs.
•Holders accommodate gages at 30° and 45°.
•26 piece set with holder. Ranges 1/64 - 17/64 by 64ths and 9/32 - 1/2 by 32nds in vinyl case.
Shipping Info:
•Actual Weight - .5500
•Dimensions - Height: .900 Length: 7.60 Width: 4.50
18 x 24" - Surface Plate Cover
Item #: NS6083004
Manufacturer: Starrett
Mfg #: 83023
Technical Specifications:
•Brand Name: Starrett
•Length: 24
•Type: Surface Plate Cover
•Width: 18
Description:
•Strong vinyl material with soft cloth lining
•Protects surface plate from dust
•Fits snugly over top of standard size surface plates
Shipping Info:
•Actual Weight - 2.8000
•Dimensions - Height: 5.40 Length: 13.1 Width: 9.20
1/2" Tap Holder w/clutch fits Size 1 quick change adaptor
Item #: JB559680508
Manufacturer: Palmgren
Mfg #: 9680508
Technical Specifications:
*Brand Name: Palmgren
*Model Number: 80508
*Tap Size: 1/2
*Type: Tap Holder
*Weight: 1 lb
Description:
*No matter the size of tap, the right choice of tap holder is a clutch style torque drive tap holder
*These holders make tapping blind holes easy
*The torque clutch allows the tap to stop turning when it becomes dull or encounters any obstruction that might cause the tap to break
*It is adjustable for all types of materials
*The quick change tap holder allows you to change from one size tap to another in a flash
*No gears, head height, or stops to change
*Quick adaptor change size of 1
*Fits in all of our Quick Tap and Shop Tap models
*Changing taps take approximately 3 - 5 seconds
*Less likely to break than regular taps
Shipping Info:
*Actual Weight - 1.0000
*Addl Fee Under 70lb - $12.00 per item
3/8" Tap Holder w/clutch fits Size 1 quick change adaptor
Item #: JB559680506
Manufacturer: Palmgren
Mfg #: 9680506
Technical Specifications:
*Brand Name: Palmgren
*Model Number: 80506
*Tap Size: 3/8
*Type: Tap Holder
*Weight: 1 lb
Description:
*No matter the size of tap, the right choice of tap holder is a clutch style torque drive tap holder
*These holders make tapping blind holes easy
*The torque clutch allows the tap to stop turning when it becomes dull or encounters any obstruction that might cause the tap to break
*It is adjustable for all types of materials
*The quick change tap holder allows you to change from one size tap to another in a flash
*No gears, head height, or stops to change
*Quick adaptor change size of 1
*Fits in all of our Quick Tap and Shop Tap models
*Changing taps take approximately 3 - 5 seconds
*Less likely to break than regular taps
Shipping Info:
*Actual Weight - 1.0000
*Addl Fee Under 70lb - $12.00 per item
1/4" Tap Holder w/clutch fits Size 1 quick change adaptor
Item #: JB559680504
Manufacturer: Palmgren
Mfg #: 9680504
Technical Specifications:
*Brand Name: Palmgren
*Model Number: 80504
*Tap Size: 1/4
*Type: Tap Holder
*Weight: 1 lb
Description:
*No matter the size of tap, the right choice of tap holder is a clutch style torque drive tap holder
*These holders make tapping blind holes easy
*The torque clutch allows the tap to stop turning when it becomes dull or encounters any obstruction that might cause the tap to break
*It is adjustable for all types of materials
*The quick change tap holder allows you to change from one size tap to another in a flash
*No gears, head height, or stops to change
*Quick adaptor change size of 1
*Fits in all of our Quick Tap and Shop Tap models
*Changing taps take approximately 3 - 5 seconds
*Less likely to break than regular taps
Shipping Info:
*Actual Weight - 1.0000
*Addl Fee Under 70lb - $12.00 per item
5/8 x 5 Hex End Lathe Chuck Wrench
Item #: HF7062500C
Manufacturer: H & R
Mfg #: HR-5/8X5HE
Technical Specifications:
*Brand Name: H & R
*Handle Diameter: 3/4
*Handle Length: 18
*Head Length: 5
*Size of Square: 5/8
*Type: Square Hex End Lathe Chuck Wrench
Description:
*Hex End Chuck Wrench with Handle
*Handle lengths are designed for maximum twisting load
*WARRANTY IS VOID if handle extension (Cheater Pipe) is used or has been used with wrenches and/or any modification made to wrench
Shipping Info:
*Actual Weight - 3.6800
4 Mil Blue Powdered Nitrile Gloves - Size Medium (case of 10 boxes of 100 gloves)
Item #: KB389011MK
Manufacturer: PRM Pro
Mfg #:
Technical Specifications:
•Brand Name: PRM Pro
•Color: Blue
•Count: 1000
•Description: Powdered
•Material: Nitrile
•Size: Medium
•Style: Textured Finish
•Thickness: 4 Mil
•Type: Industrial / Food Service Grade
Description:
•Ambidextrous design fits right or left hand
•Loose fit around wrist for comfort
•Textured finish for wet or dry conditions
•Made from materials that comply with FDA regulations
Shipping Info:
•Actual Weight - 9.5000
A-E 16 M Torque Wrench Head - Mini-Nut
Item #: GM20715316000
Manufacturer: Rego-Fix
Mfg #: 7153.16
Technical Specifications:
*Brand Name: Rego-Fix
*Collet Style: ER16
*Description: AE16 M Torque Wrench Head - Mini-Nut
Description:
*Torque Wrench Head
Shipping Info:
*Actual Weight - .2500
*Dimensions - Height: 1.34 Length: 2.32 Width: 1.34
7/16 Dia. x 4 Overall Length 2-Flute Square End Solid Carbide SE End Mill-Round Shank-Center Cut-TiAlN
Item #: MT3290145
Manufacturer: Morse Cutting Tools
Mfg #: 90145
Technical Specifications:
•Brand Name: Morse Cutting Tools
•Class: Single-End End Mills
•Coating: TiAlN
•Flute Length: 2
•List No.: 5954
•Material: Solid Carbide
•Number of Flutes: 2
•Overall Length: 4
•Shank Diameter: 7/16
•Size: 7/16
•Style: Long
•Type: Center Cut
Description:
•Solid Carbide 2-Flute Single End Mills
•TiALN Coated Long Length
Shipping Info:
•Actual Weight - .2500
STANLEY® Bullnose Rabbet Plane – 1-1/2" x 10"
Item #: KP432340
Manufacturer: Stanley
Mfg #: 12-978
Technical Specifications:
Description:
Shipping Info:
•Actual Weight - 3.3400
•Dimensions - Height: 1.60 Length: 10.6 Width: 5.00
Style DD - 2-1/2 OD X 2 ID - CNC Bushing
Item #: RH21DD2502000
Manufacturer: Rapidhold
Mfg #: DD2502000
Technical Specifications:
*Brand Name: Rapidhold
*Inside Diameter: 2
*Outside Diameter: 2-1/2
*Style: DD
Description:
*DD Style toolholder bushing: combination J and B style bushings-split with a flat and two holes
Shipping Info:
*Actual Weight - 1.3700
1-1/16 16C COLLET HEX
Item #: GM74163068
Manufacturer: Lyndex
Mfg #: 163-068
Technical Specifications:
*Brand Name: Lyndex
*Collet Style/Fits: 16C
*ID: 1-1/16
*Opening Shape: Hex
Description:
Shipping Info:
ER20 Collet Quick Change Tap Adapter
Item #: GM2721120000
Manufacturer: Bilz
Mfg #: 21120000
Technical Specifications:
*Brand Name: Bilz
*Collet Style/Fits: ER20
*Style: WE1-IKP / ESX20GB
*Tap Range (Fractional): #8-5/16
*Tap Range (Metric): M4-M12
*Type: ER Collet Quick Change Tap Adapter
Description:
Shipping Info:
*Actual Weight - 1.3000