HARRINGTON 1/2 TON 10' LIFT

Item #: RN51NER005L10
Manufacturer: Harrington
Mfg #: NER005L-10

Technical Specifications:
•Brand Name: Harrington •Capacity: 1/2 •Headroom: 14.6 •Lift Height (ft): 10 •Lifting Speed: 15 •Load Chain Diameter: 6mm •Model Number: NER005L-10 •Motor: .75HP, 208/230/460V, 3PH •Rated Load: 1/2 Ton •Type: Electric Chain Hoist •Weight: 71 lbs

Description:

Shipping Info:
•Actual Weight - 71.0000 •Addl Fee Over 70lb-$23.00 per item

$ 3,489.07

3-Jaw Power Chuck; 10 inch; Direct Mount A2-6

Item #: HK3137811060
Manufacturer: TMX
Mfg #: 3-781-1060

Technical Specifications:
*Brand Name: TMX *Chuck Diameter: 10 *Chuck Height: 4.449 *Description: 3-Jaw Power Chuck Direct Mount *Gripping Range Max.: 10.000 *Gripping Range Min.: 1.220 *Jaw Stroke (Dia.): .335 *Max. Gripping Force (lbs): 28088 *Max. Speed (rpm): 4200 *Model Number: 37811060 *Mount: A2-6 *Net Weight (lbs): 90 *Number of Jaws: 3 *Plunger Stroke: .787 *Spindle Nose: A2-6 *Through Hole Diameter: 3.032

Description:
*3-Jaw Direct Mount Power Chuck *Supplied with spindle mounting plate, Semi-finished draw nut, draw nut wrench, set of soft top jaws, set of t-nuts, wrenches for chuck installation and operation. *Low cost direct replacement for major OE brands *High performance and great value *Use existing top jaws 1.5mmx 60° serrations *Hardened and ground critical surfaces for long life and high accuracy *Large thru hole *1 Year Warranty

Shipping Info:
*Actual Weight - 90.0000 *Addl Fee Over 70lb - $19.00 per item

$ 3,035.65

14X8X5 TY 07 FEED WHL A/O

Item #: MH601422859
Manufacturer: Norton Abrasives
Mfg #: 6625332285

Technical Specifications:
*Brand Name: Norton Abrasives

Description:

Shipping Info:
*Actual Weight - 100.0000 *Addl Fee Over 70lb - $19.00 per item

$ 2,864.02

Proto® 157 Piece Metric Intermediate Set

Item #: KP4280135
Manufacturer: Proto
Mfg #: J99430

Technical Specifications:
•Brand Name: Proto •Drive: 3/8 & 1/2 •Model Number: J99430 •Number of Pieces: 157

Description:
•73 - Sockets and accessories •27 - Wrenches •15 - Striking and struck tools •13 - Pliers •12 - Screwdrivers •17 - Miscellaneous tools •157 pieces •3/8" & 1/2" drive tools •Designed for fastener sizes 4 mm - 26 mm

Shipping Info:
•Actual Weight - 72.2900 •Dimensions - Height: 9.00 Length: 35.8 Width: 21.8 •Addl Fee Over 70lb-$23.00 per item

$ 4,138.12

3-Jaw Power Chuck; 10 inch; Direct Mount A2-8

Item #: HK3137811080
Manufacturer: TMX
Mfg #: 3-781-1080

Technical Specifications:
*Brand Name: TMX *Chuck Diameter: 10 *Chuck Height: 4.449 *Description: 3-Jaw Power Chuck Direct Mount *Gripping Range Max.: 10.000 *Gripping Range Min.: 1.220 *Jaw Stroke (Dia.): .335 *Max. Gripping Force (lbs): 28088 *Max. Speed (rpm): 4200 *Model Number: 37811080 *Mount: A2-8 *Net Weight (lbs): 95 *Number of Jaws: 3 *Plunger Stroke: .787 *Spindle Nose: A2-8 *Through Hole Diameter: 3.032

Description:
*3-Jaw Direct Mount Power Chuck *Supplied with spindle mounting plate, Semi-finished draw nut, draw nut wrench, set of soft top jaws, set of t-nuts, wrenches for chuck installation and operation. *Low cost direct replacement for major OE brands *High performance and great value *Use existing top jaws 1.5mmx 60° serrations *Hardened and ground critical surfaces for long life and high accuracy *Large thru hole *1 Year Warranty

Shipping Info:
*Actual Weight - 95.0000 *Dimensions - Height: 10.0 Length: 14.0 Width: 14.0 *Addl Fee Over 70lb - $19.00 per item

$ 3,035.65

M30 - 3.50 x 120mm - Black Finish Heat Treated Alloy Steel - Cap Screws - Socket Head

Item #: SH6030120
Manufacturer: Brighton Best
Mfg #: 532475

Technical Specifications:
*Box Qty.: 1 *Brand Name: Brighton Best *Coating: Black Finish *Length: 120 *Material: Heat Treated Alloy Steel *Screw Style: Cap Screws - Socket Head *Size: M30 - 3.50 *Thread: Metric

Description:
*Ideal for precision assembly work with close tolerances, and applications needing a well-tooled appearance *Supplies greater tensile strength than equivalent sizes of grade 8.8 and 10.9 socket cap screws *Metric socket cap screws are internally wrenched, and are black finished in appearance *Grade 12.9 heat treated alloy steel. *World Class Quality

Shipping Info:
*Actual Weight - 1.8352

$ 27.25

DRO203 12 x 40 Lathe Kit 2 Axis

Item #: HC02T2031240
Manufacturer: Acu-Rite
Mfg #: T203-1240

Technical Specifications:
•Application: Turning •Axis: 2 •Brand Name: Acu-Rite •Description: For Turning Applications •Model Number: T203-1240 •Series: 203 •Travel: 12 x 40 •Type: Digital Readout System

Description:
•DRO203 •7" TFT Color Display •USB Type C Data Interface •Job Clock •Feed Rate Display •Multiple Language Supports •Absolute/Incremental •Graphic Pos aid for Near Zero Warning with Graphics •Help Function •16 Tool Offsets / Diameter •Preset and Zero Reset •4 Function Calculator / Trig Calculator / RPM •Instance inc/mm Conversion •Position-TracTM (Recalls last data after power loss) / RM •Multiple Datums •Scale Factor (Allows for part shrinkage / expansion) •Counter Diagnostics •Encoder Input Linear or Rotary •Linear / Non-Linear Compensation up to ±9,999 ppm •Backlash Compensation •2 Year Warranty

Shipping Info:
•Actual Weight - 40.0000

$ 2,707.71

1-8 x 3 - Black Finish Heat Treated Alloy Steel - Socket Set Screws - Cup Point

Item #: SH8022248
Manufacturer: Holo-Krome
Mfg #: 32294

Technical Specifications:
*Box Qty.: 25 *Brand Name: Holo-Krome *Coating: Black Finish *Hex Key: 3/4 *Length: 3 *Material: Heat Treated Alloy Steel *Screw Style: Socket Set Screws - Cup Point *Size: 1-8 *Thread: Coarse

Description:
*Cup Point Socket Set Screws - Coarse *Most common set screw style used *Designed for fast, permanent/semi-permanent location of parts on shafts, where cutting in of a cup edge is acceptable *Heat Treated Alloy Steel Class 3A Thread Fit

Shipping Info:
*Actual Weight - .4800

$ 27.25

Ajust-Tru+ Universal Chuck - 10" Plain Mount; 6-Jaw; Solid Jaw

Item #: HL50B8106S
Manufacturer: Buck Chuck
Mfg #: B8106S

Technical Specifications:
*Body Width: 3.58 *Body Width including Master Jaw: 5.41 *Brand Name: Buck Chuck *Chuck Diameter: 10.04 *Chuck Size: 10 *Chuck Style: Scroll Chuck *Class: Lathe Chucks & Accessories *Description: 10" 6 Jaw Scroll Chuck Solder One Piece Jaws *Hole Size: 3.230 *ID Clamping Range: 2.76-8.66 *ID Max.: 8.66 *ID Min.: 2.76 *Jaw Width: 1.23 *Maximum Clamping Range: 8.66 *Maximum RPM: 2600 *Model Number: B8106S *Mount: Plain Back *Mount Recess: 7.87 *Mount Recess Depth: 0.31 *Mounting Bolt Radius: 8.82 *Number of Jaws: 6 *OD Clamping Range: 0.59-8.27 *OD Max.: 8.27 *OD Min.: 0.59 *Size of Mounting Bolts: M12 x 1.75P *Style: One Piece *Total Length: 3.58 *Total Width: 3.58 *Trade Name: Buck Chuck *Type: Ajust-Tru+ Universal Chuck *Weight: 80 lbs

Description:
*6-Jaw Solid Jaw Chucks Require AT Adapters *2, 3, 4 and 6-jaw models offer "dead true" precision of .0005" repeatability on duplicate parts. Up to six times more accurate than conventional chucks.

Shipping Info:
*Commercial Truck - Call for Shipping Charges *Actual Weight - 77.0000

$ 2,905.13

Proto® 550S 34" Roller Cabinet - 6 Drawer, Gloss Blue

Item #: KP4290910
Manufacturer: Proto
Mfg #: J553441-6B

Technical Specifications:
•Brand Name: Proto •Model Number: J553441-6BL

Description:
•Cubic inch capacity is 15,765 •Made of 14, 16 and 18 gauge steel •Ball bearing track slides •125-lbs capacity •Adjustable detents 12 to 24-lbs pull force •Heavy-duty locks with tubular key •Recessed aluminum extruded drawer pulls •100% full extension drawers •Vinyl top and drawer liners included •6" x 2" Poly casters - 900 lbs/caster

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 317.5000 •Dimensions - Height: 49.0 Length: 30.0 Width: 39.0

$ 4,314.36

2 x 4 x 36 - Air Hardening Flat Stock

Item #: LY4557703
Manufacturer: Starrett
Mfg #: 57703

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-2 *Thick: 2 *Width: 4

Description:
*497 is a A-2 5% chromium air hardening steel with high wear and abrasion resistance *Standard size: +/-.001" thickness tolerance *Maintains close dimensional accuracy throughout the heat treating process *Ground straight and parallel

Shipping Info:
*Actual Weight - 81.5900 *Addl Fee Over 70lb - $19.00 per item

$ 3,034.91

Cimflo 78 - 55 Gallon

Item #: LL5100216D
Manufacturer: Cimcool
Mfg #: 00216-D

Technical Specifications:
•Brand Name: Cimcool •Hazard Code: HAZ06 •Size: 55 Gallon

Description:

Shipping Info:
•HAZ 06 •UPS Ground - Commercial TruckOnly, Call for Charges •UPS Air - Commercial Truck Only, Call for Charges •Commercial Truck - CommercialTruck Only, Call for Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 500.3000

$ 2,719.52

Bench Grinder-Deluxe - #8123WD; 8 x 1 x 3/4'' Wheel Size; 3/4HP; 3PH; 208-230/460V Motor

Item #: PP508123WD
Manufacturer: Baldor
Mfg #: 8123WD

Technical Specifications:
•Agency Approvals: UL - CSA •Brand Name: Baldor •Features: Supplied W/ Switch less cord & plug •Model Number: 8123WD •Motor: 3/4HP, 208-230/460V, 3PH •RPM: 3600 •Weight: 112 lbs •Wheel Size: 8 x 1 x 3/4

Description:
•Cast Iron Tool Rests •Wheel Guards •Start/Stop Switches •Single Phase units include a Power Cord with Plug, Three Phase do not •3 Year Warranty •F.O.B. WARREN, MI •Standard Equipment:•(1) Coarse Grit and (1) Medium Grit Grinding Wheels •Water Pot •Tool Tray •Two Lighted Eye Shields (wired through the On/Off Switch on Single Phase Units)

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 109.0000

$ 2,225.77

DRO303 16 x 31 Mill Kit 2 Axis

Item #: HC02M3031631
Manufacturer: Acu-Rite
Mfg #: M303-1631

Technical Specifications:
•Application: Milling •Axis: 2 •Brand Name: Acu-Rite •Description: For Milling Applications •Model Number: M303-1631 •Series: 303 •Travel: 16 x 31 •Type: Digital Readout System

Description:
•DRO303 •7" TFT Color Display •USB Type C Data Interface •Job Clock •Feed Rate Display •Multiple Language Supports •Absolute/Incremental •Graphic Pos aid for Near Zero Warning with Graphics •Help Function •99 Tool Offsets / Diameter •Preset and Zero Reset •4 Function Calculator / Trig Calculator / RPM •Instance inc/mm Conversion •Position-TracTM (Recalls last data after power loss) / RM •Advanced Skew Compensation •Multiple Datums •Multiple Display Views DRO1 & DRO2 •Part Program Storage (Load, Save, Import, Export) •Scale Factor (Allows for part shrinkage / expansion) •Counter Diagnostics •Encoder Input Linear or Rotary •Linear / Non-Linear Compensation up to ±9,999 ppm •Backlash Compensation •Measured Value Out allows data to be output when probing •Remote Switch allows data output and a remote zero

Shipping Info:
•Actual Weight - 40.0000

$ 2,720.71

DRO303 13 x 32 Mill Kit 2 Axis

Item #: HC02M3031332
Manufacturer: Acu-Rite
Mfg #: M303-1332

Technical Specifications:
•Application: Milling •Axis: 2 •Brand Name: Acu-Rite •Description: For Milling Applications •Model Number: M303-1332 •Series: 303 •Travel: 13 x 32 •Type: Digital Readout System

Description:
•DRO303 •7" TFT Color Display •USB Type C Data Interface •Job Clock •Feed Rate Display •Multiple Language Supports •Absolute/Incremental •Graphic Pos aid for Near Zero Warning with Graphics •Help Function •99 Tool Offsets / Diameter •Preset and Zero Reset •4 Function Calculator / Trig Calculator / RPM •Instance inc/mm Conversion •Position-TracTM (Recalls last data after power loss) / RM •Advanced Skew Compensation •Multiple Datums •Multiple Display Views DRO1 & DRO2 •Part Program Storage (Load, Save, Import, Export) •Scale Factor (Allows for part shrinkage / expansion) •Counter Diagnostics •Encoder Input Linear or Rotary •Linear / Non-Linear Compensation up to ±9,999 ppm •Backlash Compensation •Measured Value Out allows data to be output when probing •Remote Switch allows data output and a remote zero

Shipping Info:
•Actual Weight - 30.0000

$ 2,796.99

DRO303 12 x 30 Mill Kit 2 Axis

Item #: HC02M3031230
Manufacturer: Acu-Rite
Mfg #: M303-1230

Technical Specifications:
•Application: Milling •Axis: 2 •Brand Name: Acu-Rite •Description: For Milling Applications •Model Number: M303-1230 •Series: 303 •Travel: 12 x 30 •Type: Digital Readout System

Description:
•DRO303 •7" TFT Color Display •USB Type C Data Interface •Job Clock •Feed Rate Display •Multiple Language Supports •Absolute/Incremental •Graphic Pos aid for Near Zero Warning with Graphics •Help Function •99 Tool Offsets / Diameter •Preset and Zero Reset •4 Function Calculator / Trig Calculator / RPM •Instance inc/mm Conversion •Position-TracTM (Recalls last data after power loss) / RM •Advanced Skew Compensation •Multiple Datums •Multiple Display Views DRO1 & DRO2 •Part Program Storage (Load, Save, Import, Export) •Scale Factor (Allows for part shrinkage / expansion) •Counter Diagnostics •Encoder Input Linear or Rotary •Linear / Non-Linear Compensation up to ±9,999 ppm •Backlash Compensation •Measured Value Out allows data to be output when probing •Remote Switch allows data output and a remote zero

Shipping Info:
•Actual Weight - 28.0000

$ 2,640.97

DRO303 14 x 35 Mill Kit 2 Axis

Item #: HC02M3031435
Manufacturer: Acu-Rite
Mfg #: M303-1435

Technical Specifications:
•Application: Milling •Axis: 2 •Brand Name: Acu-Rite •Description: For Milling Applications •Model Number: M303-1435 •Series: 303 •Travel: 14 x 35 •Type: Digital Readout System

Description:
•DRO303 •7" TFT Color Display •USB Type C Data Interface •Job Clock •Feed Rate Display •Multiple Language Supports •Absolute/Incremental •Graphic Pos aid for Near Zero Warning with Graphics •Help Function •99 Tool Offsets / Diameter •Preset and Zero Reset •4 Function Calculator / Trig Calculator / RPM •Instance inc/mm Conversion •Position-TracTM (Recalls last data after power loss) / RM •Advanced Skew Compensation •Multiple Datums •Multiple Display Views DRO1 & DRO2 •Part Program Storage (Load, Save, Import, Export) •Scale Factor (Allows for part shrinkage / expansion) •Counter Diagnostics •Encoder Input Linear or Rotary •Linear / Non-Linear Compensation up to ±9,999 ppm •Backlash Compensation •Measured Value Out allows data to be output when probing •Remote Switch allows data output and a remote zero

Shipping Info:
•Actual Weight - 35.0000

$ 2,902.73

10"-11" DIGIMATIC HOLTEST

Item #: MT80468-280
Manufacturer: Mitutoyo
Mfg #: 468-280

Technical Specifications:
•Brand Name: Mitutoyo •Model Number: 468-280

Description:

Shipping Info:
•Actual Weight - 3.3289

$ 2,824.57

DRO102 12 x 60 Lathe Kit 2 Axis

Item #: HC01T1021260
Manufacturer: Acu-Rite
Mfg #: T102-1260

Technical Specifications:
•Application: Turning •Axis: 2 •Brand Name: Acu-Rite •Description: For Turning Applications •Model Number: T102-1260 •Series: 102 •Travel: 12 x 60 •Type: Digital Readout System

Description:
•DRO102 •7" TFT Color Display •USB Type C Data Interface •Feed Rate Display •Mulitple Language Supports •Absolute/Incremental •Help Function •Zero Reset •Instant inch/mm Conversion •Counter Diagnostics •Encoder Input Linear or Rotary •2 Year Warranty

Shipping Info:
•Actual Weight - 55.0000

$ 2,817.79

M24 - 3.00 x 70 - Black Finish Heat Treated Alloy Steel - Cap Screws - Socket Head

Item #: SH8060270
Manufacturer: Holo-Krome
Mfg #: 76556

Technical Specifications:
*Box Qty.: 10 *Brand Name: Holo-Krome *Coating: Black Finish *Hex Key: 19 mm *Length: 70 *Material: Heat Treated Alloy Steel *Screw Style: Cap Screws - Socket Head *Size: M24 - 3.00 *Thread: Metric

Description:
*Ideal for precision assembly work with close tolerances, and applications needing a well-tooled appearance *Supplies greater tensile strength than equivalent sizes of grade 8.8 and 10.9 socket cap screws *Metric socket cap screws are internally wrenched, and are black finished in appearance *Grade 12.9 heat treated alloy steel

Shipping Info:
*Actual Weight - .7850

$ 27.16