ET01 and ET02 - (25001 Products)
Procunier High Speed Tapper -- #4F3MT; 3MT Shank
Item #: GH5014003
Manufacturer: Procunier
Mfg #: 14003
Technical Specifications:
*Brand Name: Procunier
*Capacity in Aluminum: 1/4 - 1-1/8, M7-M28, 1/8-3/4 Pipe
*Capacity in 1010 Mild Steel: 1/4 - 1, M7-M22
*Collet Style/Fits: 4F
*Maximum RPM: 800
*Model Number: 4F3MT
*Shank Size: 3MT
*Type: High Speed Tapper
Description:
*High Speed Tapper
*Balanced, heat-treated gear reversing mechanism minimizes strain and wear.
*Reverses at twice forward speed to increase productivity and avoid tap jamming.
*Extremely sensitive friction clutch engages conical surfaces of drive and reverse shells with smooth, "cushioned" action, allowing sensitive operator "feel."
*Assure automatic tap protection.
*One-piece TRU-GRIP spindle assures true alignment
*Can be modified to be used in horizontal position
*Factory can easily alter any model for left-hand tapping
*Collets not included"order separately below
Shipping Info:
*Actual Weight - 21.7820
Apex 6500 Synthetic Coolant - 55 Gallon
Item #: LK70A650055
Manufacturer: Ashburn
Mfg #: A-6500-55
Technical Specifications:
•Brand Name: Ashburn •Hazard Code: HAZ06 •Size: 55 Gallon
Description:
•Increased Lubricity vs Conventional Synthetic Coolants •Superior Rust and Corrosion Protection •Very Low Carry-Off Reduces Coolant Consumption •Works well on Ferrous and Nonferrous Metals •A high lubricity, heavy duty synthetic coolant. It is fortified with a special blend of high viscosity index polymer lubricants. These polymers remain soluble in water until activated by the heat of friction during machining and grinding. This results in a coolant with excellent lubricity at the tool/chip interface, yet with very little carryoff on parts.
Shipping Info:
•HAZ 06 •UPS Ground - Commercial TruckOnly, Call for Charges •UPS Air - Commercial Truck Only, Call for Charges •Commercial Truck - CommercialTruck Only, Call for Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 540.0000 •Dimensions - Height: 34.9 Length: 23.0 Width: 23.0
Elephant Super Spacer - 8'' Diameter
Item #: JJ40CS8
Manufacturer: Elephant
Mfg #:
Technical Specifications:
*Brand Name: Elephant
*Size: 8
*Type: Super Spacer
Description:
*24 Position master plate
*360° Graduated ring
*Graduated ring with five minute vernier reading
*Worm gear reduction ratio is 1:90
*Super Standard Accessories:
*3-Jaw chuck
*Six masking plates (2, 3, 4, 6, 8, & 12 position)
*T-slotted face plate (8" or 10")
Shipping Info:
*Commercial Truck - Call for Shipping Charges
*Actual Weight - 171.0000
*Dimensions - Height: 15.0 Length: 16.5 Width: 18.0
Disc Sander/Grinder - #DS12; 12" Disc; 1HP; 1PH Motor
Item #: PT50DS12
Manufacturer: Kalamazoo
Mfg #: DS12
Technical Specifications:
•Brand Name: Kalamazoo
•Disc Size: 12
•Features: Bench Type
•Model Number: DS12
•Motor: 1HP, 1PH
•Table Size: 8 x 14
•Weight: 85 lbs
Description:
•Heavy-duty, all steel
•Tilt table, 45° down - 15° up
•Miter gauge options
•1 Year Warranty
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 85.0000
•Shipping Weight - 103.0000
•Dimensions - Height: 28.0 Length: 30.0 Width: 17.0
Saw Blade Lube MQL System, Solenoid On/Off, for Circular or Band Saws
Item #: UN10L1ES16153S3
Manufacturer: Unist
Mfg #: CL1ESOL161
Technical Specifications:
•Brand Name: Unist
•Description: Solenoid
•Includes: 3" Bat Nozzle
•Line Length: 15'
•Line Material: Coaxial Polyurethane
•Number of Outlets: 1
•Style: Direct
•Tank Capacity: 16 oz
•Type: Standard
Description:
•Single-outlet Minimum Quantity Lubrication Solution (MQL) for sawing operations
•Continuous precision output
•Reduces fluid use and increased tool life
•Reliable Unist pump
•Seperate air and fluid control
•Use Coolube lubricant for lifetime warranty on pump
Shipping Info:
•Actual Weight - 15.9000
Coolubricator JR - 1 outlet MQL Applicator, Manual On/Off, with BAT Nozzle
Item #: UN10J1EM16153S3
Manufacturer: Unist
Mfg #: CJ1EMAN161
Technical Specifications:
•Brand Name: Unist
•Description: Manual
•Includes: 3" Bat Nozzle
•Line Length: 15'
•Line Material: Coaxial Polyurethane
•Number of Outlets: 1
•Style: Magnet
•Tank Capacity: 16 oz
•Type: None
Description:
•Single-outlet portable Minimum Quantity Lubrication Solution (MQL) for sawing operations
•Continuous precision output
•Reduces fluid use and increased tool life
•Reliable Unist pump
•Seperate air and fluid control
•Use Coolube lubricant for lifetime warranty on pump
Shipping Info:
•Actual Weight - 3.0000
Automatic Cyclic Pump - PE-1202-15
Item #: NW50PE120215
Manufacturer: Trico
Mfg #: PE-1202-15
Technical Specifications:
•Brand Name: Trico
•Interval Between Cycles: 15 min
•Low Level Switch: Yes
•Max Output (cc/hr): 24
•Min Output (cc/hr): 12
•Model No.: PE-1202-15
•Output per Stroke (cc): Adjustable 3-6
•Reservoir Capacity: 2 Liters
Description:
•For use in heavy duty applications requiring a timed delivery of lubricant. These durable pumps provide long life and trouble-free service. These pumps are used with meter units in multiple point applications.
•Transparent 2 liter reservoir simplifies viewing oil level
•PE 12 series has low level switch to signal when lubricant level is low
•Adjustable output range of 3 to 6 cc/cycle, or 3 to 120 cc/hour
•Convenient drop-in filter in fill port keeps oil clean
Shipping Info:
•Actual Weight - 5.0000
Box & Pan Brake - #1304822 - 48-1/4'' Working Length - 22 Gauge Capacity (Mild Steel)
Item #: PK801304822
Manufacturer: Quality Import
Mfg #:
Technical Specifications:
•Brand Name: Quality Import
•Capacity-Mild Steel: 22 Gauge
•Capacity-Stainless Steel: 26 Gauge
•Finger Widths: 2, 3, 4
•Maximum Depth of Box: 3
•Maximum Lift of Beam: 7/8
•Min. Reverse Bend: 5/16
•Model Number: 1304822
•Type: Box & Pan Brake
•Weight: 330 lbs
•Working Length: 48-1/4
Description:
•Removable fingers
•Maximum gauge capacities are applicable when using mild steel
•Using galvanized steel lowers the maximum gauge capacity
•F.O.B. WARREN, MI
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 330.0000
•Dimensions - Height: 30.0 Length: 50.0 Width: 20.0
Bessey Heater Raising Block -- Model #BCRB; 5'' Height; For: BC & BCS Bearing Heaters
Item #: SG75BCRB
Manufacturer: Bessey
Mfg #: BCRB
Technical Specifications:
•Brand Name: Bessey
•Fits: BC & BCS Bearing Heaters
•Height: 5
•Weight: 31 lbs (fits BC & BCS bearing heaters)
•Width: 3-5/8
Description:
•Raising blocks (sold in pairs) lift bearing heater crossbar to accommodate larger diameter bearings.
Shipping Info:
•Actual Weight - 31.0000
Operated Utility Hydraulic Press - B-10 - 10 Ton Capacity
Item #: RK5072200
Manufacturer: Dake
Mfg #: B-10
Technical Specifications:
•Base: 23 x 18
•Brand Name: Dake
•Capacity (tons): 10
•Height: 36
•Maximum Ram To Table: 16
•Minimum Ram To Table: 4
•Model Number: B-10
•Ram Travel (in): 6
•Type: Hand Operated Hydraulic Press
•Weight: 165 lbs
•Width Between Uprights: 16-3/4
Description:
•Available both in the B-10 Bench Model and the F-10 Floor Model
•Furnished with a flat ram nose for pressing and a step reduced ram nose for bushing work
•Hydraulic pressing cylinder can be located right or left
•Adjustable table
•Table plates and v-blocks are also furnished for many other pressuring applications
•1 Year Warranty
•F.O.B. GRAND HAVEN, MI
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 137.0000
•Dimensions - Height: 6.00 Length: 19.0 Width: 30.0
#9 Jarno Ball Bearing Standard - Live Center
Item #: HK2212209
Manufacturer: Riten
Mfg #: 12209
Technical Specifications:
*Accuracy: .00005
*Brand Name: Riten
*Head Diameter: 1-11/16
*Head Length: 15/16
*Mount: 9 Jarno
*Mount Type: Jarno Taper
*Neck Width: 3/16
*Point Diameter: 7/8
*Point Length: 1
*Point Style: Standard
*Radial Load: 1000 lbs
*Style: Ball Bearing
*Type: Live Center
Description:
*Super Accurate Live Center
*The ultimate live center for grinding is provided by Riten's unique design
*Ideal for precision grinding applications
*Accuracy guaranteed to ±.00005 T.I.R.
*Compact design
*Extended points available
*Ideal for grinding
*1000 RPM maximum - For all Super Accurate
*Riten full service, repair, and guarantee apply
Shipping Info:
*Actual Weight - 2.0000
Quantalube 270XL - 5 Gallon
Item #: LL5100168P
Manufacturer: Cimcool
Mfg #: 00168-P
Technical Specifications:
•Brand Name: Cimcool
•Hazard Code: HAZ58
•Size: 5 Gallon
Description:
Shipping Info:
•HAZ 58
•UPS Ground - No Additional Shipping Charges
•UPS Air-No Additional Shipping Charges
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 46.8000
High Speed Production Air Vise - 3-1/8" Jaw Width
Item #: JC5033
Manufacturer: Heinrich
Mfg #: 33-ASSEMBL
Technical Specifications:
*Brand Name: Heinrich
*Jaw Depth of Bars: 1-1/4
*Jaw Opening: 3
*Jaw Width: 3-1/8
*Size: 3
*Type: High Speed Production Air Vise
*Weight: 20 lbs
Description:
*High Speed Production Air Vise
*Holding Power 15x air pressure (1500 lbs. at 100 psi)
*Hands-free operation of vise
*Pressure regulator may be controlled to suit operators, accommodate jig and fixture components
*Furnished with foot pedal valve, fittings and necessary hoses
*Hollow base for clear drilling
*Quick positioning of jaw at any point within jaw opening
*V-block attachment available
Shipping Info:
*Actual Weight - 19.7000
*Dimensions - Height: 9.70 Length: 11.5 Width: 9.40
25-781J-8 DIAL INDICATOR
Item #: MV7064657
Manufacturer: Starrett
Mfg #: 64657
Technical Specifications:
•Brand Name: Starrett
•Model Number: 25-781J-8
Description:
Shipping Info:
•Actual Weight - .5500
3/8" Drive - 30-250 in/lbs - Micro Adjustable Torque Wrench
Item #: KL452502MRMH
Manufacturer: CDI
Mfg #: 9927439
Technical Specifications:
•Brand Name: CDI
•Class: Wrench
•Description: Inch Pound
•Drive: 3/8
•Increments: 1 in/lbs
•Length: 11.15
•Torque Range: 30 - 250 in/lbs
•Type: Micro Adjustable Torque Wrench
Description:
•Torque Wrenches with Micro-Adjustable Metal Handle
•Single scale, calibrated single direction
•Positive lock with spring loaded pull down lock ring
•Fast, accurate and easy to set
•Easy-to-read laser marked scales
•Most feature quick release buttons which provide good socket retention as well as easy socket removal
•Accuracy /- 3% clockwise direction, from 20-100% full scale
•Meets or exceeds ASME B107.14M-1994, ISO 6789 standards
•Individually serialized with matching certificate of calibration traceable to N.I.S.T.
Shipping Info:
•Actual Weight - 1.5000
•Dimensions - Height: 2.20 Length: 12.7 Width: 3.50
Centrifugal Replacement Immersion Pump - 1/8 HP
Item #: LC55IMV08E
Manufacturer: Graymills
Mfg #: IMV08-E
Technical Specifications:
•Bolt Size: 5
•Brand Name: Graymills
•Flange Diameter: 5 x 5
•Flow: 10 GPM
•Horse Power: 1/8
•Maximum Viscosity: 500 SSU
•Model Number: IMV08E
•Motor: 115/230V, 1PH
•NPT Discharge: 3/8
•Overall Length: 11-13/16
•Phase: 1
•Pump Depth: 6
•Type: Immersion Pump
•Volt: 115/230
•Weight: 15 lbs
Description:
•Centrifugal Replacement Pumps For Imported Machine Tools
•3450 RPM Motors Sealed Bearings 5/16" Diameter Flange Mounting Holes 1/8 & 1/4 HP Plastic Impeller 1/2, 3/4 & 1 HP Aluminum Impeller
Shipping Info:
•Actual Weight - 13.1500
•Dimensions - Height: 8.40 Length: 13.6 Width: 7.40
CIMPERIAL® 1011 - 5 Gallon
Item #: LL5100090P
Manufacturer: Cimcool
Mfg #: 00090-P
Technical Specifications:
•Brand Name: Cimcool
•Hazard Code: HAZ58
•Size: 5 Gallon
Description:
Shipping Info:
•HAZ 58
•UPS Ground - No Additional Shipping Charges
•UPS Air-No Additional Shipping Charges
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 46.3500
#33068 - 6" Talongrip Vise Jaws
Item #: SG7033068
Manufacturer: Mitee-Bite
Mfg #: 33068
Technical Specifications:
Description:
*All Jaw Sets are tapped with 2 additional holes to acceptM4 Pitbull® Clamps
*Jaws are not heat-treated to allow for custom modifications
*All grips and stops are heat-treated A2 steel
*Set includes (4) TalonGrips and (1) stop with M5 screws
Shipping Info:
*Actual Weight - 5.0000
CIMTECH® 304MA Blue - 5 Gallon
Item #: LL5100035P
Manufacturer: Cimcool
Mfg #: 00035-P
Technical Specifications:
•Brand Name: Cimcool
•Hazard Code: HAZ58
•Size: 5 Gallon
Description:
Shipping Info:
•HAZ 58
•UPS Ground - No Additional Shipping Charges
•UPS Air-No Additional Shipping Charges
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 47.9500
•Dimensions - Height: 16.0 Length: 12.2 Width: 12.2
#IC37 - .375 - 1.375'' Range - .001'' Graduation - Dial Face Internal Caliper Gage
Item #: NB45IC37
Manufacturer: Procheck
Mfg #:
Technical Specifications:
•Arm Length: 3-1/4
•Brand Name: Procheck
•Graduation: .001
•Model Number: IC37
•Total Opening Range: .375 - 1.375
•Type: Dial Face Internal Caliper Gage
Description:
•For checking internal bores, recess diameters, etc.
•Each instrument has a movement of 1"
•Can be set with a micrometer or ring gage
•Dial face diameter 2"
•Bezel rotates for zero setting
•Arms automatically open when button is released
•Carbide measuring points
Shipping Info:
•Actual Weight - .6000
•Dimensions - Height: 1.70 Length: 6.70 Width: 4.70