4X8" 809G TRANS 3M TAPE SHEETS

Item #: LF5395289
Manufacturer: 3M
Mfg #: 0002120095

Technical Specifications:
•Brand Name: 3M

Description:

Shipping Info:
•Actual Weight - 24.0000

$ 1,642.54

1/8 x 12 x 36 - A6 Air Hardening Precision Ground Flat Stock

Item #: LY4458964
Manufacturer: Starrett
Mfg #: 58964

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-6 *Thick: 1/8 *Width: 12

Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance *Lower heat treating temperature results in deep hardness and minimum distortion

Shipping Info:
*Actual Weight - 15.3000

$ 2,267.88

BIO922 BIOMATIC PARTS CLNR

Item #: LC55BIO922
Manufacturer: Graymills
Mfg #: BIO922-A

Technical Specifications:
•Brand Name: Graymills

Description:
•Uses hydrocarbon converting microbes to reduce solid waste and virtually eliminate fluid disposal •Thermostatically controlled 1,400 watt heater delivers heated solution up to 110°F (44°C) •Rugged thermosplastic corrosion-resistant construction (5 year warranty) •Flow-thru brush, flexible stay-put nozzle - brush or flush away soil with 300 GPH pump •Low liquid level shuts off heater in event liquid level drops below a set point •GFI shuts down entire unit in event of electrical short •9" Soak depth tank, molded bottom ridges allow soaking parts with detergent circulation while parts sit above sludge •Removable stainless steel work shelf for way postiioning of parts while hand cleaning •CETL certified

Shipping Info:
•Actual Weight - 125.0000 •Addl Fee Over 70lb - $23.00 per item

$ 2,137.29

2-16mm ER25 Collet Set

Item #: HA708125300
Manufacturer: Haimer USA LLC
Mfg #: 81.253.00

Technical Specifications:
*Brand Name: Haimer USA LLC *Collet Style: ER25 *Model Number: 81.253.00 *Size Range: 2mm - 16mm *Type: ER Collet Set

Description:
*3-micron accuracy *Superior Clamping Strength *Fits HAIMER Power collet chucks

Shipping Info:
*Actual Weight - 1.6500

$ 2,282.09

Ajust-Tru+ Universal Chuck - 8" Plain Mount; 6-Jaw

Item #: HL50B8086
Manufacturer: Buck Chuck
Mfg #: B8086

Technical Specifications:
*Body Width: 3.15 *Body Width including Master Jaw: 3.20 *Bolt Hole Center Distance: 1.75 *Brand Name: Buck Chuck *Chuck Diameter: 7.87 *Chuck Size: 8 *Chuck Style: Scroll Chuck *Class: Lathe Chucks & Accessories *Description: 8" 6 Jaw Scroll Chuck 2 Piece Reversible Jaws *Hole Size: 2.370 *ID Clamping Range: 2.56-7.09 *ID Max.: 7.09 *ID Min.: 2.56 *Jaw Width: 1.25 *Master Jaw Keyway: 0.50 *Maximum Clamping Range: 7.87 *Maximum RPM: 3000 *Model Number: B8086 *Mount: Plain Back *Mount Recess: 6.30 *Mount Recess Depth: 0.31 *Mounting Bolt Radius: 6.93 *Number of Jaws: 6 *OD Clamping Range: 0.79-7.87 *OD Max.: 7.87 *OD Min.: 0.79 *Size of Mounting Bolts: M10 x 1.5P *Style: Two Piece Reversible American Standard Tongue & Groove *Top Jaw Height: 1.88 *Total Length: 3.15 *Total Width: 3.15 *Trade Name: Buck Chuck *Type: Ajust-Tru+ Universal Chuck *Weight: 40 lbs

Description:
*6-Jaw 2-Pc. Top Reversible Jaw Chucks Require AT Adapters *2, 3, 4 and 6-jaw models offer "dead true" precision of .0005" repeatability on duplicate parts. Up to six times more accurate than conventional chucks.

Shipping Info:
*Actual Weight - 40.0000 *Dimensions - Height: 8.00 Length: 11.0 Width: 11.0

$ 2,175.02

10" 4-Jaw D8 Independent Forged Steel Lathe Chuck 2 pc TJ

Item #: HK308571038F
Manufacturer: Bison
Mfg #: 7-857-1038

Technical Specifications:
*Body Width: 3.051 *Brand Name: Bison *Chuck Diameter: 10 *Chuck Size: 10 *Chuck Style: Independent *Description: Independent Lathe Chuck - 4-Jaw (2 Pc) Forged Steel 10" D-8, 2.56" Hole *Hole Size: 2.56 *Jaw Width: 1.339 *Master Jaw Keyway: 1/2 *Maximum RPM: 2000 *Model Number: 7-857-1038F *Mount: D1-8 *Number of Jaws: 2 *Number of Studs: 6 *OD Max.: 200mm *OD Min.: 10mm *Spindle Diameter: 5.5 *Stud Diameter: 1 *Top Jaw Height: 2.023 *Total Width: 5.429 *Type: Direct Mount *Weight: 86 lbs

Description:
*All chucks 10" and above have T-slots *Cast steel body *Standard Accessories: * *2 Pc. reversible jaws (hard top jaws and hard master jaws) *(1) Wrench *(1) Set of clamping bolts

Shipping Info:
*Actual Weight - 86.0000 *Addl Fee Over 70lb - $19.00 per item

$ 2,512.54

TRACK MAT FOR T8206 -12'X63' BERM

Item #: LC50T8206TM
Manufacturer: Eagle
Mfg #: T8206TM

Technical Specifications:
•Brand Name: Eagle

Description:

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 260.0000

$ 2,706.07

6-12" MICROMETER SET

Item #: MT80103-909
Manufacturer: Mitutoyo
Mfg #: 103-909

Technical Specifications:
•Brand Name: Mitutoyo •Model Number: 103-909

Description:

Shipping Info:
•Actual Weight - 36.0900 •Dimensions - Height: 13.0 Length: 21.0 Width: 11.5

$ 2,110.78

36"W - 14 Gauge - Lockable Ventilated Cabinet - 3 Adjustable Shelves - Flush Door Style - Gray

Item #: SB55EMDC3624729
Manufacturer: Durham
Mfg #: EMDC-36247

Technical Specifications:
•Brand Name: Durham •Color: Textured Gray •Depth: 24 •Height: 72 •Load Capacity: 900 lbs per shelf •Model Number: EMDC-362472-95 •Number of Shelves: (4) adjustable shelves •Weight: 335 lbs •Width: 36

Description:
•Heavy duty all welded 14 guage steel •3-point locking system with chrome keyed handle and 5/16" diameter lock rods •Full height welded piano hinges for increased strength and rigidity of doors •Punched diamond pattern in doors allows content visibility and ventilation •Adjustable shelves rest on louver uprights and adjust on 4" centers.(no tools required) •F.O.B. Texas

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 335.0000

$ 2,031.76

Wedge Type Power Chuck - 10" A6 Mount; 3-Jaw

Item #: HE65V210A6
Manufacturer: Strong
Mfg #: V210A6

Technical Specifications:
*Brand Name: Strong *Chuck Size: 10 *Class: Lathe Chucks & Accessories *Hole Size: 2.953 *Mount: A-6 *Number of Jaws: 3 *Type: Closed Center Wedge Type Power Chuck

Description:
*3-Jaw Wedge Type PowerChucks (With Adaptor) *Directly Interchangeable With Kitagawa *N-200A & V200A Series Chucks Strong 3-jaw large thru-hole draw tube and draw bar operated power chucks come with 1.5mm x 60° metric serration master jaws, one set of soft blank top jaws, semi-finished draw nut, T-nuts, mounting hardwares, and draw nut wrench. *Assembled with adaptor for mounting ASA B5.9 or type A1 and A2 spindles. *Manufactured from high grade alloy steel. All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. *All parts directly interchangeable with Kitagawa. *Accuracy .0005"

Shipping Info:
*Actual Weight - 116.0000 *Addl Fee Over 70lb - $19.00 per item

$ 2,029.20

KEN80KX12 ORANGE ENDLESS

Item #: SE87KEN80KX12
Manufacturer:
Mfg #:

Technical Specifications:

Description:

Shipping Info:
•Actual Weight - 21.6000 •Dimensions - Height: 9.00 Length: 24.0 Width: 12.0

$ 2,132.11

1A1 6 X 1/2 X 1-1/4 AD320-UP061-1/4

Item #: MH63W06082133
Manufacturer: Norton Abrasives
Mfg #: 6015768213

Technical Specifications:
*Brand Name: Norton Abrasives

Description:

Shipping Info:
*Actual Weight - 2.1000

$ 2,431.72

HAZ06 55GAL RUSTLICK 631

Item #: LK6071551
Manufacturer: Rustlick
Mfg #: 71551

Technical Specifications:
•Brand Name: Rustlick •Hazard Code: HAZ06 •Size: 55 Gallon •Type: Rust Inhibitor

Description:

Shipping Info:
•HAZ 06 •UPS Ground - Commercial TruckOnly, Call for Charges •UPS Air - Commercial Truck Only, Call for Charges •Commercial Truck - CommercialTruck Only, Call for Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 410.0000

$ 2,150.99

Wedge Type Power Chuck - 10" A8 Mount; 3-Jaw

Item #: HE65V210A8
Manufacturer: Strong
Mfg #: V210A8

Technical Specifications:
*Brand Name: Strong *Chuck Size: 10 *Class: Lathe Chucks & Accessories *Hole Size: 2.953 *Mount: A-8 *Number of Jaws: 3 *Type: Closed Center Wedge Type Power Chuck

Description:
*3-Jaw Wedge Type PowerChucks (With Adaptor) *Directly Interchangeable With Kitagawa *N-200A & V200A Series Chucks Strong 3-jaw large thru-hole draw tube and draw bar operated power chucks come with 1.5mm x 60° metric serration master jaws, one set of soft blank top jaws, semi-finished draw nut, T-nuts, mounting hardwares, and draw nut wrench. *Assembled with adaptor for mounting ASA B5.9 or type A1 and A2 spindles. *Manufactured from high grade alloy steel. All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. *All parts directly interchangeable with Kitagawa. *Accuracy .0005"

Shipping Info:
*Actual Weight - 113.0000 *Addl Fee Over 70lb - $19.00 per item

$ 2,029.20

8" Mechanical Power Vise

Item #: SC60PCV200
Manufacturer: Samchully
Mfg #: PCV-200

Technical Specifications:
*Base Dimensions: 7.953 *Base Height: 4.331 *Brand Name: Samchully *Jaw Height (in.): 2.756 *Jaw Length (in.): 3.858 *Jaw Stroke (in/mm): 12.598 / 320mm *Jaw Width (in.): 7.874 *Max Clamp Force (ft-lb/N-m): 13488 / 60 *Model Number: PCV200 *Weight: 220 lbs

Description:
*Precision Power Vise *Easily Adjustable Torque Settings *High Accuracy & Repeatability *Heat Treated Jaws *Protective Chip Shield for Protection and Long Life

Shipping Info:
*Commercial Truck - Call for Shipping Charges *Actual Weight - 340.0000

$ 2,029.20

60 Gallon - All Welded - FM Approved - Flammable Safety Cabinet - Self-closing Doors - 2 Shelves - Safety Yellow

Item #: SB551060S50
Manufacturer: Durham
Mfg #: 1060S-50

Technical Specifications:
•Brand Name: Durham •Color: Yellow •Depth: 34 •Height: 65-3/8 •Model Number: 1060S-50 •Number of Shelves: (2) adjustable shelf •Weight: 533 lbs •Width: 34

Description:
•Sturdy all welded double wall steel construction •(2) Self closing door •Fusible link provided - Melts to activate self close at 165 degrees •2" wide louvers support shelves, adjustable on 4" centers •2" Deep leak proof sump •2" Bunged air vents with flame arrestors on each side of the cabinet allows for ventilation •FM APPROVED •F.O.B. Texas

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 533.0000

$ 2,027.59

HDL Double Lock Vise - 4" Jaw Width- With Hard Jaw Kit

Item #: HT80HDL4J
Manufacturer: Kurt
Mfg #: HDL4J

Technical Specifications:
*Brand Name: Kurt

Description:

Shipping Info:
*Actual Weight - 41.6000 *Dimensions - Height: 4.50 Length: 22.0 Width: 7.00

$ 2,024.10

PAO06R500A150W-17 FACE MILL

Item #: TP9052800007
Manufacturer: OSG USA, Inc.
Mfg #: 52800007

Technical Specifications:
•Brand Name: OSG USA, Inc.

Description:

Shipping Info:

$ 1,969.45

#54-100-020 Haz05 0-20" Electronic Caliper

Item #: NA5554100020
Manufacturer: Fowler
Mfg #: 54-100-020

Technical Specifications:
•Accuracy: .0005" / 0.01mm •Brand Name: Fowler •Hazard Code: HAZ05 •Measuring Range: 0 - 20 / 0 - 500mm •Model Number: 54-100-020 •Resolution: .0005" / 0.01mm •Type: Ultra-Cal III Heavy Duty Electronic Caliper with Knife Jaws - See more at: http://www.fowlerprecision.com/Products/Electronic-Calipers/0-20-500mm-Ultra-Cal-III-Heavy-Duty-Electronic-Caliper-with-Knife-Jaws

Description:

Shipping Info:
•HAZ 5C •UPS Ground - No Additional Shipping Charges •UPS Air - Cannot Ship Air •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 8.0000 •Additional handling -$15.00 per item

$ 2,248.59

RBK 6" Machine Vise

Item #: HK80179076
Manufacturer: Rohm
Mfg #: 179076

Technical Specifications:
*Brand Name: Rohm *Clamp Force: 6700 lbs *Jaw Depth: 1-7/32 *Jaw Width: 4-29/64 *Key Slot Width: 33/64 *Model Number: 179076 *Size: 6 *Type: RB-K Vise *Vise Height: 3-13/16

Description:
*Operated mechanically with power intensification *Stepwise clamping force presetting *Clamping without power intensificationfor deformation-sensitive workpieces possible *High precision due to precise jaw guides *Rapid clamping range adjustment via locking pin *Better coolant and chip flow *High wear resistance due to hardenend jaw guides *Can be used on a rotation plate with angular spacing *Ground area with longitudinal groove for accurate fixing on machine table *Clamping option with clamps *Enclosed spindle

Shipping Info:
*Actual Weight - 52.8000

$ 3,188.91