ET01 and ET02 - (25001 Products)
CIMSTAR® Qual Star LF Pink - 55 Gallon
Item #: LL5100039D
Manufacturer: Cimcool
Mfg #: 00039-D
Technical Specifications:
•Brand Name: Cimcool
•Hazard Code: HAZ06
•Size: 55 Gallon
Description:
Shipping Info:
•HAZ 06
•UPS Ground - Commercial TruckOnly, Call for Charges
•UPS Air - Commercial Truck Only, Call for Charges
•Commercial Truck - CommercialTruck Only, Call for Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 499.7500
13X60 YDS 253 TAN SPLICING TAPE 3M
Item #: LF5338754
Manufacturer: 3M
Mfg #: 0002120038
Technical Specifications:
•Brand Name: 3M
Description:
Shipping Info:
•Actual Weight - 9.5593
C6LC208093140 CLAMP UNIT
Item #: FF8149845
Manufacturer: Sandvik Coromant
Mfg #: 5729281
Technical Specifications:
*Brand Name: Sandvik Coromant
Description:
Shipping Info:
*Actual Weight - 25.0800
6X36 YDS 5420 TRANSPARENT SQUEAK
Item #: LF5338713
Manufacturer: 3M
Mfg #: 0002120038
Technical Specifications:
•Brand Name: 3M
Description:
Shipping Info:
•Actual Weight - 3.9999
#MTCVBM - 2-3/4 x 3-5/8 x 5-1/2'' - Magnetic V-Block Matched Pair
Item #: NJ50MTCVBM
Manufacturer: Suburban
Mfg #: MTC-VB-M
Technical Specifications:
•Brand Name: Suburban
•Model Number: MTCVBM
•Number of Blocks: 1
•Size: 2-3/4 x 3-5/8 x 5-1/2
•Squareness: .0005
•Type: Magnetic V-Block-Matched Pair
Description:
•Top, bottom and end magnetize simultaneously (chucks only)
•All models precision ground flat, square and parallel to an overall accuracy of .0005"
•Model MTC-LFP has 3/16" x 1/16" fine pole construction for holding small or thin parts; and removable side and end rails
•On/Off switch
•Powerful Alnico magnets
Shipping Info:
•HAZ 5C
•UPS Ground - No Additional Shipping Charges
•UPS Air - Cannot Ship Air
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 32.0000
•Dimensions - Height: 6.00 Length: 12.0 Width: 10.0
•Additional handling -$15.00 per item
78-8076-4857-7 MOTOR GEAR WITH
Item #: LF5375985
Manufacturer: 3M
Mfg #: 0005113575
Technical Specifications:
•Brand Name: 3M
Description:
Shipping Info:
#ISR-C003 Roughness Tester
Item #: SZ20ISRC003
Manufacturer: Insize
Mfg #: ISR-C003
Technical Specifications:
•Brand Name: Insize
•Measuring Range: Rq: 2~590µ¼in, Rz, Rt: 4~1968µ¼in
•Model Number: ISR-C003
•Type: Roughness Tester
•Weight: 3.53 lbs
Description:
•Unit: µ¼m, µ¼in
•Automatic power off
Shipping Info:
•Actual Weight - 3.5300
56-1/4 x 69 x 52-1/2" - 28" Fork Pocket Centers - 2 Cubic Yard - 4000 lbs Capacity
Item #: RV54D200MD
Manufacturer: Vestil
Mfg #: D-200-MD
Technical Specifications:
•Brand Name: Vestil
•Capacity: 4000
•Color: Powder Coat Blue
•Description: Hopper
•Size: 56-5/8 x 68-5/16 x 51-13/16" (W x D x H), 28" fork pocket centers
Description:
Standard Features:
•Includes front bumper release for easy hopper dumping
•Includes manual pull-cable to dump from seat of fork truck
•Hopper returns to upright position automatically after dumping
•Each fork pocket is 7-1/2"W x 2-1/2"H usable
•Safety strap to secure hopper to forklift
•Full-length fork tubes
•Precision robotic welded steel construction
•Durable powder coat blue finish
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 730.0000
•Shipping Weight - 1326.0000
•Dimensions - Height: 53.0 Length: 61.0 Width: 57.0
4 x 50' x 3 - 15M Grit - 661X Diamond Lapping Film Disc Roll
Item #: TM1150062
Manufacturer: 3M
Mfg #: 0005111150
Technical Specifications:
*Brand Name: 3M
*Case Qty: 1
*Color: Orange
*Diameter: 4
*Grit: 15M
*Size: 4 x 50' x 3
*Standard Package: 1
*Type: Diamond Lapping Film Disc Roll
Description:
*Fast cut, increased throughput
*Flatter surface and sharp edges
*Uniform finish
*Available in discs, sheets and rolls
Shipping Info:
*Actual Weight - 6.0000
Backplate for Set-Tru 20" D1-11
Item #: HK313875209P
Manufacturer: TMX
Mfg #: 3-875-209P
Technical Specifications:
*: "
*: "
*: M20
*: 5.501
*Brand Name: TMX
*Chuck Diameter: 19.69
*Chuck Size: 20
*Chuck Style: Set-Tru
*Description: Fully Finished
*For Chuck Size: 20
*Height: 1.496
*Model Number: 3-875-209P
*Mount: D1-11
*Thread Depth: "
*Thru Hole: 5.358
*Weight: 73.854 lbs
Description:
*Type D1 American Standard camlock spindles
Shipping Info:
*Actual Weight - 73.8548
*Addl Fee Over 70lb - $19.00 per item
20X8X12 T01 CENTERLESS WHL S/C/A/O
Item #: MH602066546
Manufacturer: Norton Abrasives
Mfg #: 6907866654
Technical Specifications:
*Brand Name: Norton Abrasives
Description:
Shipping Info:
*Commercial Truck - Call for Shipping Charges
*Actual Weight - 153.2500
3/4 x 8 x 36 - Oversize Air Hardening Flat Stock
Item #: LY4657444
Manufacturer: Starrett
Mfg #: 57444
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 3/4
*Width: 8
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 61.1900
HVBS-712, 7" x 12" Horizontal / Vertical Bandsaw
Item #: PY60414559
Manufacturer: Jet
Mfg #: 414559
Technical Specifications:
•Bed Height: 22-1/4
•Blade Length: 93
•Blade Size: 3/4 x 0.032 x 93
•Blade Speeds: 86, 132, 178, 260 SFPM
•Blade Wheel: 11-3/4
•Blade Widths: 3/4
•Brand Name: Jet
•Capacity (in.): 7 x 12
•Dimensions: 48 x 17 x 40
•Model Number: HVBS-712
•Motor: 3/4HP, 115/230V, 1PH
•Rectangle Cap.@ 45°: 6-1/2 x 4-1/2
•Rectangle Cap.@ 90°: 4 x 11 / 7 x 10-3/8
•Round Cap. @ 90°: 7
•Round Cap.@ 45°: 4-1/2
•Square Cap. @ 45°: 4-1/2 x 4-1/2
•Square Cap. @ 90°: 7 x 7
•Type: Step Pulley
•Vise Swivels: 45°
•Weight: 418 lbs
Description:
Features:
Toolless quick change vise, miters to 45°
•Toolless quick lock vise with preset mitering positions at 15°, 30° & 45° (PY60414560)
•Adjustable hydraulic downfeed system
•CSA/CUS Certified
•Auto shut-off after cut
•Cast mounted hydraulic downfeed for ease of cut
•Prewired 115V
•2 Year Warranty
•Standard Equipment:•Micro adjustable tooless material stop (PY60414560)
•Bi-metal 5/8T blade
•Coolant Pump with 1 gallon tank, 1/8HP, single phase motor complete with hose, flexible nozzle, shut-off valve, tank and baffle
•Chip brush
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 374.0000
•Dimensions - Height: 44.0 Length: 50.0 Width: 20.0
RCH302 30 TON HOLL-0-CYLINDER
Item #: KL70RCH302
Manufacturer: Enerpac
Mfg #: RCH302
Technical Specifications:
•Brand Name: Enerpac
Description:
Shipping Info:
•Actual Weight - 25.0000
#12DIN8 For 12-1/2'' Chucks; DIN-8 Mount - Lathe Chuck Adaptor Plate
Item #: HK1612DIN8
Manufacturer: Generic USA
Mfg #: 12DIN8
Technical Specifications:
*Brand Name: Generic USA
*Chuck Size: 12-1/2
*For Chuck Size: 12-1/2
*Mount: DIN8
*Plate Thickness: 1-3/8
*Type: Lathe Chuck Adaptor Plate
Description:
*German DIN Spindle Adapter Plates
Shipping Info:
*Actual Weight - 51.0000
4X1-1/4X1-1/4" DMD WHL 11A2 OD
Item #: MH6396315
Manufacturer: Norton Abrasives
Mfg #: 6015769631
Technical Specifications:
Description:
Shipping Info:
*Actual Weight - 1.0000
6X36 YDS 5425 TRANSPARENT UHMW
Item #: LF5330285
Manufacturer: 3M
Mfg #: 0002120030
Technical Specifications:
•Brand Name: 3M
Description:
Shipping Info:
•Actual Weight - 2.7788
546113012 PULLBAR
Item #: FF8613238
Manufacturer: Sandvik Coromant
Mfg #: 5762845
Technical Specifications:
•Brand Name: Sandvik Coromant
Description:
Shipping Info:
•Actual Weight - 5.2866
1-1/4" Dia. - Wedge Anchor
Item #: SK4810180
Manufacturer: U.S. Anchor
Mfg #: 157710
Technical Specifications:
*Anchor Style: Wedge
*Box Qty.: 5
*Brand Name: U.S. Anchor
*Diameter: 1-1/4
*Length: 12
*Min. Embed: 5-1/2
*Thread Length: 4
Description:
*Wedge Anchor
*Used for heavy duty fastening applications where high pullout values are required
*The advanced design of the collar reduces the likelihood of the anchor "spinning"
*Used in a wide variety of structural applications
*Pipe-hanging tilt-ups, bridges, elevator equipment, conveyors and highway construction frequently require the wedge type anchor
*Ideal for installing machinery, hand rails, dock bumpers and storage racks, etc.
*Wedge anchors are sold unassembled with the appropriate nuts and washers
Shipping Info:
*Actual Weight - 4.6000