Astro-Cut C Biostable Heavy Duty Soluble Oil Metalworking Fluid-55 Gallon Drum

Item #: LK5036550
Manufacturer: Monroe Fluid Technology
Mfg #: 0036-1-550

Technical Specifications:
•Brand Name: Monroe Fluid Technology •Hazard Code: HAZ06 •Size: 55 Gallon •Type: Coolants

Description:
•Astro-Cut C is a heavy duty biostable soluble oil concentrate containging a chlorined additive for difficult maching operations

Shipping Info:
•HAZ 06 •UPS Ground - Commercial TruckOnly, Call for Charges •UPS Air - Commercial Truck Only, Call for Charges •Commercial Truck - CommercialTruck Only, Call for Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 500.0000

$ 1,851.78

16X1.5X5 5SG60-KVS SURF/CYL WHL CA

Item #: MH601667010
Manufacturer: Norton Abrasives
Mfg #: 6625346701

Technical Specifications:
*Brand Name: Norton Abrasives

Description:

Shipping Info:
*Actual Weight - 24.0500

$ 1,947.89

18 x 1-1/2 x 10 - Oil Hardening Flat Stock

Item #: LY5013210
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: O-1 *Thick: 1-1/2 *Width: 10

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 80.2500 *Addl Fee Over 70lb - $19.00 per item

$ 0.00

C8 x PG 25 x 330mm XL Capto Capto powRgrip Collet Holder

Item #: GM21888876160
Manufacturer: Rego-Fix
Mfg #: 8888.7616

Technical Specifications:
*Brand Name: Rego-Fix *Collet Style/Fits: PG25 *Gage Length: 330mm *Mount: C8 *Nose Diameter: 40mm *Style: Capto powRgrip Collet Holder *Type: Extra Long

Description:
*T.I.R. <3 µ¼m *Highest clamping force and transferable force *Surface finish max. Ra 0.25 *Q+ balanced to G 2.5 @ 25000 min-1 *Ideal for high speed cutting and high performance cutting *Ready to accept Hi-Q balancing rings which allow to offset the imbalance introduced by the cutting tool up to 80000 min-1

Shipping Info:
*Actual Weight - .2500

$ 1,908.88

WK400-120-6-K WK-4KN-120MM STROKE

Item #: MA48WK4001206K
Manufacturer: De-Sta-Co
Mfg #: WK400-120-

Technical Specifications:
*Brand Name: De-Sta-Co

Description:

Shipping Info:
*Actual Weight - 3.3075

$ 1,944.34

Tool Post Grinder with Interchangeable Spindle - 1/2HP

Item #: RL9557021
Manufacturer: Dumore
Mfg #: 8587-210

Technical Specifications:
*Brand Name: Dumore *Motor: 1/2 HP *Speed Range: 3450 to 32600 RPM *Style: 1/2 HP Induction Motor, 115V, 60 Hz, AC Only *Type: Tool Post Grinder with Interchangeable Spindle

Description:
*Model 57 - Tool Post Grinder with Interchangeable Spindle *6" diameter external grinding wheel *Internal grinding up to 18" deep at 1-7/8" diameter *Comes with belts, pulleys, belt guard, T-bolt, mounting post, diamond dresser, wrench set and carrying case *For lathes with swings from 9" to 20"

Shipping Info:
*Commercial Truck - Call for Shipping Charges *Actual Weight - 59.0000

$ 1,851.65

A-100-90-3CT-300 - Cartridge Type Finish Head

Item #: TE106390335
Manufacturer: Techniks
Mfg #: 6390335

Technical Specifications:
•Brand Name: Techniks •Calibrated Vernier Dial: Adjustable in 0.0001" increments •Cartridge: 3CT-90-300 •Description: Finish Head 100 x 90 lead #3 Inch cartridge with TCMT (125-160mm) •Head Diameter: 110mm •Head Pilot Diameter mm: 60 •Head Pilot Diameter Inch: 2.362 •Insert Type: TCMT 32.5_ •Minimum Bore Diameter: 4.921 •Projection Length mm: 100 •Projection Length Inch: 3.94 •Screw: TE106811262 •Tool Position (Vertical): Vertical or Horizontal

Description:
•Techniks 90 degree Cartridge Type Finish Head •Spring-loaded slide won't lose position during adjustment •AccuSET 0.0001" graduated dial allows for fast and easy adjustments •Designed for maximum Rigidity and Accuracy

Shipping Info:
•Actual Weight - 13.8000

$ 1,845.66

4-Jaw(2Pc) Independent Forged Steel Body Chuck 8" D-3, 1.97" Hole,

Item #: HK3138570833P
Manufacturer: TMX
Mfg #: 3-857-0833

Technical Specifications:
*: – *: – *: 2.854 *Base Bolt Hole Size: – *Brand Name: TMX *Chuck Diameter: 8 *Chuck Size: 8 *Chuck Style: Independent Chuck *Description: Forged Steel *Hole Size: 1.968 *Jaw Type: 2 Pc *Model Number: 3-857-0833P *Mount: D1-3 *Mount Recess: 2.125 *Mount Recess Depth: – *Number of Jaws: 4 *Type: Direct Mount *Weight: 37.8 lbs

Description:
*Designed to grip round or odd shaped work pieces *Hard top and master jaws are made of high quality alloy steel then hardened and ground *All 4-Jaw independent chucks 10" and above have t-slots

Shipping Info:
*Actual Weight - 37.8000 *Addl Fee Under 70lb - $12.00 per item

$ 2,133.21

M20 - 2.50 x 260mm - Black Finish Heat Treated Alloy Steel - Cap Screws - Socket Head

Item #: SH6020260
Manufacturer: Brighton Best
Mfg #: 532317

Technical Specifications:
*Box Qty.: 5 *Brand Name: Brighton Best *Coating: Black Finish *Hex Key: 17 mm *Length: 260 *Material: Heat Treated Alloy Steel *Screw Style: Cap Screws - Socket Head *Size: M20 - 2.50 *Thread: Metric

Description:
*Ideal for precision assembly work with close tolerances, and applications needing a well-tooled appearance *Supplies greater tensile strength than equivalent sizes of grade 8.8 and 10.9 socket cap screws *Metric socket cap screws are internally wrenched, and are black finished in appearance *Grade 12.9 heat treated alloy steel. *World Class Quality

Shipping Info:
*Actual Weight - 1.5180

$ 18.51

1"-14X2 1/2"FT SHCS

Item #: SN60581834
Manufacturer:
Mfg #:

Technical Specifications:

Description:

Shipping Info:
*Actual Weight - .8800

$ 18.50

33X250 YDS SCOTCH PERFORMANCE

Item #: LF5394654
Manufacturer: 3M
Mfg #: 0005113894

Technical Specifications:
•Brand Name: 3M

Description:

Shipping Info:
•Actual Weight - 63.0739

$ 1,490.18

CIMSTAR® 55C - 55 Gallon

Item #: LL5100625D
Manufacturer: Cimcool
Mfg #: 00625-D

Technical Specifications:
•Brand Name: Cimcool •Hazard Code: HAZ06 •Size: 55 Gallon

Description:

Shipping Info:
•HAZ 06 •UPS Ground - Commercial TruckOnly, Call for Charges •UPS Air - Commercial Truck Only, Call for Charges •Commercial Truck - CommercialTruck Only, Call for Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 503.0500

$ 1,931.74

HazMat Cabinet - #5461HM - 36 x 24 x 78" Setup with partition, coat rod & 4 half shelves

Item #: SA505461HM
Manufacturer: Lyon
Mfg #: XX5461HM

Technical Specifications:
•Brand Name: Lyon •Color: Yellow •Depth: 24 •Height: 78 •Number of Shelves: 4 •Shelf Capacity: 225 lbs •Type: Flammable Liquids Storage Cabinet •Width: 36

Description:

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 174.0000

$ 2,172.80

5/8 x 3 - Black Finish Heat Treated Alloy Steel - Shoulder Screws - Socket Head

Item #: SH8000070
Manufacturer: Holo-Krome
Mfg #: 08114

Technical Specifications:
*Box Qty.: 25 *Brand Name: Holo-Krome *Coating: Black Finish *Hex Key: 5/16 *Length: 3 *Material: Heat Treated Alloy Steel *Screw Style: Shoulder Screws - Socket Head *Size: 5/8 *Thread: 1/2-13

Description:
*Shoulder Screws/Bolts *Precision ground *Heat treated alloy steel *NC thread series *Class 3A thread *Used for rotation or sliding applications such as pulley shafts, in punch work, or for use as a bearing pin *Shoulder screws are also referred to as "stripper bolts" *The shoulder screw has an enlarged unthreaded, cylindrical shoulder under the head, the diameter of which serves as basis for the begining of the nominal size

Shipping Info:
*Actual Weight - .3390

$ 1,849.32

Quick Change Tool Post/Holder Set; For Lathe Swing 16-20"

Item #: GG35SD40CACS
Manufacturer: Dorian
Mfg #: 01094

Technical Specifications:
*Brand Name: Dorian *Holders Included: (2) No. 1, (1 ea) No. 2, 7-71C, 881 *Series: SD40CA *Swing: 16 to 20

Description:
*Quick Change Tool Post Classic 6-Pc. Set

Shipping Info:

$ 2,032.53

HP-5A, 5-Ton Hydraulic Press

Item #: RK90331406
Manufacturer: Jet
Mfg #: 331406

Technical Specifications:
•Base: 23-1/2 x 26 •Brand Name: Jet •Capacity (tons): 5 •Dimensions: 24 x 26 x 52 •Height: 51-1/2 •Model Number: HP-5A •Ram Diameter: 1-3/4 •Ram Travel (in): 4 •Table Travel: 15-3/4 •Type: Hand Operated Hydraulic Press •Weight: 192 lbs •Work Area: 19 x 5-1/2

Description:
•Pressure gauge for direct pressure readings •Tables raise and lower easily with use of hand crank on 15 and 35 ton models •Side frames are open for inserting long material •Fast setup ram extension screw •Ram moves laterally on 15 and 35 ton models •2 bed plates and pump handle •2 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 192.0000

$ 2,250.61

Belt Grinder - Model#G-75--3 x 79'' Belt Size--220/440V, 3PH Motor

Item #: RF5161001
Manufacturer: Dake
Mfg #: 61001

Technical Specifications:
•Belt Size: 3 x 79 •Brand Name: Dake •Model Number: G-75 •Motor: 220V/440V, 3PH •Style: Floor •Type: Belt Grinder •Weight: 250 lbs

Description:
•3" x79" Belt Grinder •Pivots up and down for easy, ergonomic work height adjustment •Hinged top cover opens for access to grind large pieces using the entire length of the belt •Advanced belt tracking with vented front wheel fixed in place for rigidity when grinding on the wheel radius

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 250.0000

$ 1,848.21

KEN60KX14 ORANGE ENDLESS

Item #: SE87KEN60KX14
Manufacturer:
Mfg #:

Technical Specifications:

Description:

Shipping Info:
•Actual Weight - 21.0000 •Dimensions - Height: 8.00 Length: 23.0 Width: 11.0

$ 1,939.82

2-Jaw Precision Forged Steel Body Scroll Chuck with Two-Piece Hard Reversible Jaws, 12"

Item #: HK3138311200P
Manufacturer: TMX
Mfg #: 3-831-1200

Technical Specifications:
*: 3.701 *: 4400 *: 6xM16 *Base Bolt Hole Size: – *Brand Name: TMX *Chuck Diameter: 12 *Chuck Size: 12 *Chuck Style: Scroll Chuck *Description: Forged Steel *Hole Size: 4.055 *Jaw Type: 2 Pc (Soft Top) *Mount: Back *Mount Recess: 10.236 *Mount Recess Depth: .197 *Number of Jaws: 2 *Weight: 111.1 lbs

Description:

Shipping Info:
*Actual Weight - 111.1000 *Addl Fee Over 70lb - $19.00 per item

$ 1,847.04

HSK125ASMC2004002 HSK125A SHELL

Item #: WK525902753
Manufacturer: Widia
Mfg #: 5902753

Technical Specifications:
*Brand Name: Widia

Description:

Shipping Info:
*Actual Weight - 21.5380

$ 2,050.54