18.00MM PCD END MILL

Item #: GD1654930180020
Manufacturer: Guhring
Mfg #: 9054930180

Technical Specifications:
•Brand Name: Guhring

Description:


Shipping Info:
•Actual Weight - 3.5310

Bench Grinder - #7307; 7 x 1 x 5/8'' Wheel Size; 1/2HP; 1PH; 115/230V Motor

Item #: PP507307
Manufacturer: Baldor
Mfg #: 7307

Technical Specifications:
•Agency Approvals: UL - CSA •Brand Name: Baldor •Features: Supplied w/ Cast Iron Tool Rest •Model Number: 7307 •Motor: 1/2HP, 115/230V, 1PH •RPM: 3600 •Weight: 70 lbs •Wheel Size: 7 x 1 x 5/8

Description:
•Pressed Stamped Steel Guards and Tool Rests (models 712, 612E, 712E) •Cast iron wheel grinders & tool rest on all other grinders •Models with E exhaust type units •3 Year Warranty •F.O.B. WARREN, MI •Standrd Equipment:•(1) Coarse Grit and (1) Medium Grit Grinding Wheel •On/Off Switches •Single Phase Grinders are supplied with a Power Cord and Plug, 3 Phase are not

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 70.0000

36 x 1-1/2 x 6 - Oil Hardening Flat Stock

Item #: LY4054536
Manufacturer: Starrett
Mfg #: 54536

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 1-1/2 *Width: 6

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 92.7800 *Addl Fee Over 70lb - $19.00 per item

HSKA63 32mm SCHUNK TRIBOS-SPF-R Holder

Item #: HF80273338
Manufacturer: Schunk
Mfg #: 273338

Technical Specifications:
*Brand Name: Schunk *Model Number: 273338 *Nose Diameter: 67mm *Projection: 200mm *Shank Size: HSKA63 *Sleeve: 32mm *Type: TRIBOS-SPF-R

Description:


Shipping Info:
*Actual Weight - 3.3000

Grinder/Buffer - #7351; 7 x 1 x 5/8'' Wheel Size; 1/2HP; 1PH; 115/230V Motor

Item #: PP507351
Manufacturer: Baldor
Mfg #: 7351

Technical Specifications:
•Agency Approvals: UL - CSA •Brand Name: Baldor •Features: Supplied w/ Cast Iron Exhaust type guards, Cast Iron Tool Rest •Model Number: 7351 •Motor: 1/2HP, 115/230V, 1PH •RPM: 3600 •Weight: 68 lbs •Wheel Size: 7 x 1 x 5/8

Description:
•Dual purpose for grinding & buffing •All Models 3600 RPM •Single phase units supplied with switch, 8 long 3 conductor cord & plug •Three phase units furnished less cord & plug •Supplied with 1-36 Grit wheel & 1-.014 wire wheel (Models 662, 7351, 762, 762E, 8250W, 8252W) •Supplied with 1-36 Grit wheel & 1- 60 Grit wheel (Models 662E & 673E) •Rubber feet to minimize vibration •3 Year Warranty •F.O.B. FACTORY

Shipping Info:
•Actual Weight - 66.0000

Bench Grinder - #7308; 7 x 1 x 5/8'' Wheel Size; 1/2HP; 3PH; 208-230/460V Motor

Item #: PP507308
Manufacturer: Baldor
Mfg #: 7308

Technical Specifications:
•Agency Approvals: UL - CSA •Brand Name: Baldor •Features: Supplied w/ Cast Iron Tool Rest •Model Number: 7308 •Motor: 1/2HP, 208-230/460V, 3PH •RPM: 1800 •Weight: 71 lbs •Wheel Size: 7 x 1 x 5/8

Description:
•Pressed Stamped Steel Guards and Tool Rests (models 712, 612E, 712E) •Cast iron wheel grinders & tool rest on all other grinders •Models with E exhaust type units •3 Year Warranty •F.O.B. WARREN, MI •Standrd Equipment:•(1) Coarse Grit and (1) Medium Grit Grinding Wheel •On/Off Switches •Single Phase Grinders are supplied with a Power Cord and Plug, 3 Phase are not

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 71.0000

HSKA63 25mm SCHUNK TRIBOS-SPF-R Holder

Item #: HF80273337
Manufacturer: Schunk
Mfg #: 273337

Technical Specifications:
*Brand Name: Schunk *Model Number: 273337 *Nose Diameter: 60mm *Projection: 200mm *Shank Size: HSKA63 *Sleeve: 25mm *Type: TRIBOS-SPF-R

Description:


Shipping Info:
*Actual Weight - 2.9000

C10APBR24045HP CAPTO ADAPTER

Item #: FF817086884
Manufacturer: Sandvik Coromant
Mfg #: 7086884

Technical Specifications:
*Brand Name: Sandvik Coromant

Description:


Shipping Info:
*Actual Weight - 9.2690

Standard Pole Magnetic Chuck - 6" x 12"

Item #: HM50MCB612
Manufacturer: Suburban
Mfg #: MCB-612

Technical Specifications:
*Brand Name: Suburban *Height: 2-5/8 *Pole: Standard *Pole Spacing: 3/8 *Shape: Rectangular *Size: 6 x 12 *Weight: 42 lbs

Description:
*Rectangular Magnetic Chuck *Ceramic magnets provide superior holding power that never fades *Sealed against dirt and liquids, and can also be used in EDM machines *Front mounted handle is removable to eliminate interference *Handle, back rail, side rail and two clamps included *Overall height is 2-5/8"

Shipping Info:
*HAZ 5C *UPS Ground - No Additional Shipping Charges *UPS Air - Cannot Ship Air *Commercial Truck - Call for Shipping Charges *Note: The additional charges are controlled by UPS and are subject to change. *Actual Weight - 45.0000 *Dimensions - Height: 5.00 Length: 15.0 Width: 9.00 *Additional handling - $15.00 per item

3/8 X 50' HOSE REEL

14X4X8 7A CRS CUT AND POLISH WHEEL

Item #: TM2305244
Manufacturer: 3M
Mfg #: 0004801105

Technical Specifications:
*Brand Name: 3M

Description:


Shipping Info:
*Actual Weight - 12.3000

3J 18PC COLLET SET 1/16-1.1/8 BY

Item #: GM74300018S
Manufacturer: Lyndex
Mfg #: 300-018S

Technical Specifications:
*Brand Name: Lyndex

Description:


Shipping Info:
*Actual Weight - .9900

10'X 10'X 8" TALON SPILL BERM-YLW

Item #: LC50T8403
Manufacturer: Eagle
Mfg #: T8403

Technical Specifications:
•Brand Name: Eagle

Description:


Shipping Info:
•Actual Weight - 36.0000

3/4 x 12 x 18 - Oversize Air Hardening Flat Stock

Item #: LY4657634
Manufacturer: Starrett
Mfg #: 57634

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: A-2 *Thick: 3/4 *Width: 12

Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance *Oversize: +.010"/.015" thickness tolerance *Maintains close dimensional accuracy throughout the heat treating process *The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life. *Up to 50% more pieces per sharpening can be produced than with oil hardening steel *High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material *Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof *Full-length identification eliminates confusion with other steels *Furnished in 18" and 36" lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 45.8900

C10APBL24045HP CAPTO ADAPTER

Item #: FF817086885
Manufacturer: Sandvik Coromant
Mfg #: 7086885

Technical Specifications:
*Brand Name: Sandvik Coromant

Description:


Shipping Info:
*Actual Weight - 9.2670

3/4" Dia. - 4" OAL - 2 FL Straight FL Bright Carbide End Mill

Item #: GD1638670190500
Manufacturer: Guhring
Mfg #: 9038670190

Technical Specifications:
•Brand Name: Guhring •Coating: Bright •Flute Length: 1 •Helix Angle: Straight •Material: Carbide •Number of Flutes: 2 •Overall Length: 4 •Shank Diameter: 3/4 •Shank Type: Round •Size: 3/4

Description:


Shipping Info:

HAZ05 MAG FP CHUCK SUBURBAN

Item #: NJ50MC66FPS1
Manufacturer: Suburban
Mfg #: MC-66-FP-S

Technical Specifications:
*Brand Name: Suburban *Hazard Code: HAZ05

Description:


Shipping Info:
*HAZ 5C *UPS Ground - No Additional Shipping Charges *UPS Air - Cannot Ship Air *Commercial Truck - Call for Shipping Charges *Note: The additional charges are controlled by UPS and are subject to change. *Actual Weight - 25.0000 *Dimensions - Height: 5.00 Length: 9.00 Width: 9.00 *Additional handling - $15.00 per item

Electromagnetic Chuck Controls - #SMART 5B; 500 Watt

Item #: HM55SMART5B
Manufacturer: O.S. Walker
Mfg #: SMART-5B

Technical Specifications:
*Brand Name: O.S. Walker *Watts: 500 *Weight: 18 lbs

Description:
*Automatic release *Full, varaible, and residual holding *Compatible use with chucks from other manufacturers *Touchpad control for easy selection *Automatic release cycle assures workpiece is released cleanly without residual magnetism *Input: 115 VAC Output: 0-110 VDC

Shipping Info:
*Actual Weight - 18.0000

14X4X8 7A MED CUT AND POLISH WHEEL

Item #: TM2305245
Manufacturer: 3M
Mfg #: 0004801105

Technical Specifications:
*Brand Name: 3M

Description:


Shipping Info:
*Actual Weight - 11.8000

18X72 YDS 850 BLACK 3M POLY FILM

Item #: LF5339643
Manufacturer: 3M
Mfg #: 0002120039

Technical Specifications:
•Brand Name: 3M

Description:


Shipping Info:
•Actual Weight - 6.5000