ET01 and ET02 - (25001 Products)
Manual Spin Indexer -- #122100; 5C Collet Style
Item #: NJ60122100
Manufacturer: Harig
Mfg #: 122-100
Technical Specifications:
*Brand Name: Harig
*Center Height: 4-1/8
*Collet Style: 5C
*Type: Manual Spin Indexer
*Weight: 17 lbs
Description:
*Also available Manual 5C Spin Indexer
*Sturdy and dimensionally stable cast iron housing.
*Large preloaded ball bearings are durable and accurate - ideal for motorization.
*5C collet holder ground in assembly to under 0.0001 runout.
*24 Division index plate with precision index pins locks in every 15° to /- 30 seconds
*Draw sleeve for quick set-ups of collets and accessories.
*Extended base for minimal deflection even with heavier parts.
*1/4 Diameter mounting hole on top of housing for diamond dresser.
*Collet: 5C up to 1
*24 division indexing: /- 30 seconds
*Spindle runout: 0.00001
*Spindle parallel to base: 0.0002 in 6
*Motor: 1/15HP 110V AC
*Variable speed: 50-450 RPM
Shipping Info:
*Actual Weight - 17.0000
ST216AXRLZ DIGITAL MICROMETER SET
Item #: MV7066526
Manufacturer: Starrett
Mfg #: 66526
Technical Specifications:
•Brand Name: Starrett
•Model Number: ST216AXRLZ
•Thimble Type: Ratchet
Description:
Shipping Info:
•Actual Weight - 4.4000
1/2 x 8 x 36 - 496 Oil Hardening Precsision Ground Flat Stock
Item #: LY4156869
Manufacturer: Starrett
Mfg #: 56869
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 1/2
*Width: 8
Description:
*AISI 01 oil hardening tool steel. Standard size: +/-.001" thickness tolerance
*Dimensionally stable -- can be used for intricate work including thin sections, with a minimum danger of cracking
*Ground straight and parallel
Shipping Info:
*Actual Weight - 40.8000
1-1/2 x 10 x 24 - 498 Low Carbon Precision Ground Flat Stock
Item #: LY8055075
Manufacturer: Starrett
Mfg #: 55075
Technical Specifications:
*Brand Name: Starrett
*Length: 24
*Material: LC
*Thick: 1-1/2
*Width: 10
Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost
* Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
*This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
*Furnished in 24" (610mm) lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 101.9900
*Addl Fee Over 70lb - $19.00 per item
14" 4 Jaw Independent Chuck; D1-6
Item #: HK154144D6R
Manufacturer: BTC
Mfg #: 4144D6R
Technical Specifications:
*Body Width: 3.543
*Brand Name: BTC
*Chuck Diameter: 13.780
*Chuck Size: 14
*Chuck Style: Direct Mount Type "D" Independent Chuck
*Class: Lathe Chucks & Accessories
*Description: Semi Steel Body
*Hole Size: 3.740
*Model Number: 4144D6R
*Mount: D1-6
*Mount Recess: 4.188
*Mount Recess Depth: .630
*Mounting Bolt Radius: 5.252
*Number of Jaws: 4
*Size of Threaded Cam Studs: M16 x 1.5
*Taper Depth: .512
*Total Width: 5.276
*Type: 4 Jaw Independent Direct Mount - Type D (Top Reversible)
*Weight: 125 lbs
Description:
*4-Jaw Independent Chuck Direct Moount Type D
*Chucks have jaws that are operated individually to allow solid gripping of oddly shaped work pieces
*Semi-Steel or Steel Body Style
*One piece solid reversible jaws or top reversible jaws
*T-Wrench
*Mounting screws
*T- Slots in 12" and larger
Shipping Info:
*Commercial Truck - Call for Shipping Charges
*Actual Weight - 125.0000
*Dimensions - Height: 1.00 Length: 1.00 Width: 1.00
7/8 x 6 x 36 - Air Hardening Flat Stock
Item #: LY4554701
Manufacturer: Starrett
Mfg #: 54701
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 7/8
*Width: 6
Description:
*497 is a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Standard size: +/-.001" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*Ground straight and parallel
Shipping Info:
*Actual Weight - 53.5400
HSK125AEM40120MD40MMXL120MM HSK125A
Item #: WK525964630
Manufacturer: Widia
Mfg #: 5964630
Technical Specifications:
*Brand Name: Widia
Description:
Shipping Info:
*Actual Weight - 15.1557
2"X45YD SJ3871 RECLOSABLE FASTENER
Item #: KB3518798
Manufacturer: 3M
Mfg #: 0005111118
Technical Specifications:
•Brand Name: 3M
Description:
Shipping Info:
•Actual Weight - 9.2500
2"X45YD SJ3872 RECLOSABLE FASTENER
Item #: KB3518801
Manufacturer: 3M
Mfg #: 0005111118
Technical Specifications:
•Brand Name: 3M
Description:
Shipping Info:
•Actual Weight - 9.2500
METRIC NO 12 NO V BROACH SET
Item #: FB5515212
Manufacturer: Hassay Savage
Mfg #: 15212
Technical Specifications:
*Brand Name: Hassay Savage
*Broach Style: V
*Bushings: 54, 56, 58, 60, 62, 64
*Keyway Sizes: 16mm, 18mm
*Number of Pieces: 2 Broaches , 6 Collard Bushings
*Style: Metric Set 12
Description:
Shipping Info:
*Actual Weight - 70.0000
*Addl Fee Under 70lb - $12.00 per item
2"X45YD SJ3870 RECLOSABLE FASTENER
Item #: KB3518795
Manufacturer: 3M
Mfg #: 0005111118
Technical Specifications:
•Brand Name: 3M
Description:
Shipping Info:
•Actual Weight - 7.7162
20 x 6 x 12" - Aluminum Oxide (64A) / 60K Type 1 - Centerless & Cylindrical Wheel
Item #: MH60200066729
Manufacturer: Norton Abrasives
Mfg #: 6907866672
Technical Specifications:
*Brand Name: Norton Abrasives
*Color and Bond: Gray/Purple Aluminum Oxide Vitrified
*Diameter: 20
*Grit Size: 60
*Hardness: K
*Hole Size: 12
*Material: Aluminum Oxide (64A)
*Size: 20 x 6 x 12
*Spec: 64A60-KVCE
*Thickness: 6
*Type: Centerless and Cylindrical Wheel
*Wheel Type: Type 1
Description:
*Type 1 Straight Wheel Norton 64A Versatile performance at an economical price
*Specially blended aluminum oxide abrasive coupled with superior vitrifed bond.
*Versatile
*Will maintain high grinding rates without wheel breakdown
*Engineered to grind a variety of materials
Shipping Info:
*Actual Weight - 90.7473
*Addl Fee Over 70lb - $19.00 per item
24X36 7962MP CLR ADH TRANS TAPE DBL
Item #: LF53193248
Manufacturer: 3M
Mfg #: 0002120019
Technical Specifications:
•Brand Name: 3M
Description:
Shipping Info:
•Actual Weight - 39.5000
#MA050 For 12-1/2'' Chucks; A-6 Mount - Lathe Chuck Adaptor Plate
Item #: HK16MA050
Manufacturer: Generic USA
Mfg #: MA050
Technical Specifications:
*Adapter Type: "A-1" Machined Adapter Plates
*Brand Name: Generic USA
*Chuck Size: 12-1/2
*For Chuck Size: 12-1/2
*Mount: A-6
*Plate Thickness: 1-1/2
*Type: Lathe Chuck Adaptor Plate
Description:
*American Standard "A-1" Type Machined Adapter Plates
Shipping Info:
*Actual Weight - 62.0000
*Dimensions - Height: 5.00 Length: 16.0 Width: 16.0
12X11 809GP TRANS CUSTOM TAPE PAD
Item #: LF53953767
Manufacturer: 3M
Mfg #: 0002120095
Technical Specifications:
•Brand Name: 3M
Description:
Shipping Info:
•Actual Weight - 17.0000
HSK-A 63 x PG 15 x 400mm XL HSK-A powRgrip Collet Holder
Item #: GM21886573230
Manufacturer: Rego-Fix
Mfg #: 8865.7323
Technical Specifications:
*Brand Name: Rego-Fix
*Collet Style/Fits: PG32
*Gage Length: 400mm
*Mount: HSKA63
*Nose Diameter: 24mm
*Style: HSK-A powRgrip Collet Holder
*Type: Extra Long
Description:
*T.I.R. < 0.0001" (3 µ¼m)
*Highest clamping force and transferable force
*Surface finish max. Ra 0.25
*Q+ balanced to G 2.5 @ 25000 rpm for HSK holders
*Ideal for high speed cutting and high performance cutting
*Ready to accept Hi-Q balancing rings which allow to offset the imbalance introduced by the cutting tool up to 80000 min-1
Shipping Info:
*Actual Weight - .2500
4X36 YDS 5453 BRN PTFE GLASS CLOTH
Item #: LF5373505
Manufacturer: 3M
Mfg #: 0002120073
Technical Specifications:
•Brand Name: 3M
Description:
Shipping Info:
•Actual Weight - 3.1673
Blast Master Cabinet - #24BP 24W x 18D x 23H Tub Dimensions
Item #: PA5024BP
Manufacturer: Trinco
Mfg #: 24BP
Technical Specifications:
•Brand Name: Trinco
•Cabinet Dimensions: 26W x 18D x 62H
•Dust Collection System: BP
•Model Number: 24BP
•Operating Pressure: 12 CFM @ 80 PSI
•Tub Dimensions: 24W x 18D x 23H
•Type: Blast Master Cabinet
•Weight: 230 lbs
•Window Opening: 24 x 15
Description:
•Model 20BP Bench Model and the Model 20BPS Floor Model with a Stand are ideal for cleaning small parts - rated for 12 CFM, 75-85 PSI and can be operated with a 3HP air compressor
•Model No. 24BP and the No. 30BP Blasting Cabinets are Stand Alone Floor Models with all the standard features found in all of Trinco's famous dry blast units
•1 Year Warranty
•F.O.B. WARREN, MI
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 230.0000
Accessories Drawers
Item #: HA728022700
Manufacturer: Haimer USA LLC
Mfg #: 80.227.00
Technical Specifications:
•Brand Name: Haimer USA LLC
•Class: Machine Accessories
•Model Number: 80.227.00
•Type: Drawers
Description:
Shipping Info:
10 Pc. No. 90 Metric Broach Set
Item #: FB5044500
Manufacturer: duMont
Mfg #: 44500
Technical Specifications:
*Brand Name: duMont
*Broach Style: E
*Bushings: 52, 54, 55, 56, 58, 60, 62, 65
*Case: Varnished Wood Box
*Keyway Sizes: 16mm, 18mm
*Number of Pieces: 10
Description:
*duMONT Metric keyway broach sets
*Number 90 Metric Set
*All Minute Man Broach Sets are furnished in handsome varnished wood boxes, and come complete with precision broaches, slotted bushings, and necessary shims
Shipping Info:
*Actual Weight - 62.0000