19.95-25.10MM INT BORE MIC

Item #: MV4041824
Manufacturer: Interapid
Mfg #: 78.112364

Technical Specifications:
•Brand Name: Interapid •Model Number: 78.112364

Description:

Shipping Info:

$ 1,371.50

36 x 1-1/4 x 6 - Oil Hardening Flat Stock

Item #: LY4054526
Manufacturer: Starrett
Mfg #: 54526

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 1-1/4 *Width: 6

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 77.3200 *Addl Fee Over 70lb - $19.00 per item

$ 1,525.80

C5-LC2085-32130-20M

Item #: WC145029302
Manufacturer:
Mfg #:

Technical Specifications:

Description:

Shipping Info:
*Actual Weight - 7.6720

$ 1,472.45

C5-LC2085-6464

Item #: WC145012407
Manufacturer:
Mfg #:

Technical Specifications:

Description:

Shipping Info:
*Actual Weight - 8.9506

$ 1,472.45

C5-NC2000-12024-50

Item #: WC145012410
Manufacturer:
Mfg #:

Technical Specifications:

Description:

Shipping Info:
*Actual Weight - 4.5635

$ 1,472.45

24.9-30.10MM INT BORE MIC

Item #: MV4041825
Manufacturer: Interapid
Mfg #: 78.112365

Technical Specifications:
•Brand Name: Interapid •Model Number: 78.112365

Description:

Shipping Info:

$ 1,371.50

30T HYD CYLINDER SNGL ACTING 1"

Item #: KP306C30T08
Manufacturer: Williams
Mfg #: 9922915

Technical Specifications:
•Brand Name: Williams

Description:

Shipping Info:
•Actual Weight - 40.8000

$ 2,494.84

2-1/4 ALUMINUM DOVETAIL FIXTURE

Item #: RW10RWP006
Manufacturer: Raptor Workholding
Mfg #: RWP-006

Technical Specifications:
*Brand Name: Raptor Workholding *Material: Aluminum *Max. Workpiece Size (in.): 10" L x 8" W x 10" H *Model No.: RWP-006 *Type: Dovetail Fixtures *Weight: 81 lbs

Description:
*For milling applications used in four and five axis CNC machining *Uses two large stainless steel clamps to hold your workpiece *RWP006 is manufactured from 7075 Aluminum and anodized: Class 2 Type II *Fixture clamps are made from 17-4 Stainless Steel *Unique Raptor Dovetail spring-loaded clamps require only 3/16" of material to hold the workpiece

Shipping Info:
*Actual Weight - 8.9500 *Dimensions - Height: 4.40 Length: 7.71 Width: 5.43

$ 1,426.56

5/16 x 5-1/2 x 36 - A6 Air Hardening Precision Ground Flat Stock

Item #: LY4459027
Manufacturer: Starrett
Mfg #: 59027

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-6 *Thick: 5/16 *Width: 5-1/2

Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance *Lower heat treating temperature results in deep hardness and minimum distortion

Shipping Info:
*Actual Weight - 17.5300

$ 1,526.27

Super Quick Change Standard Tool Post & Holder Set

Item #: GG35SDN35CXASS
Manufacturer: Dorian
Mfg #: 01022

Technical Specifications:
*Brand Name: Dorian *Series: SD35CXA *Set Includes: Tool Post; SDN35CXA, Holders; D35CXA-1, D35CXA-2, D35CXA-4-CNC, D35CXA-7-71C *Swing: 14 to 17

Description:
*Super Quick Change Standard Set *(1) Tool Post *(4) Holders *Tooling Not Included

Shipping Info:
*Actual Weight - 29.5000

$ 1,509.23

A7495TTP-11MM XD40 SC DRILL

Item #: TT106280495
Manufacturer: Walter-Titex
Mfg #: 6280495

Technical Specifications:
•Brand Name: Walter-Titex

Description:

Shipping Info:

$ 1,494.88

1.194-1.404 INTRNAL BORE MICROMETER

Item #: MV4041844
Manufacturer: Interapid
Mfg #: 78.112384

Technical Specifications:
•Brand Name: Interapid •Model Number: 078112384

Description:

Shipping Info:

$ 1,370.48

PS6510110 17' - Skyscraper-Aluminum Ladder

Item #: PS6510110
Manufacturer: Little Giant
Mfg #: 10110

Technical Specifications:
•Brand Name: Little Giant •Folded Dimensions: 9' 7" •Material: Aluminum •Model Number: 17 •Overall Height: 9'-17' •Platform Height: N/A •Shipping Weight: 86 lbs •Size: 17' •Step-Ladder Height: N/A •Style: SkyScraper •Type: Skyscraper-Aluminum Ladder •Warranty: 5 Year

Description:
•The Little Giant Ladder System® Type 1A is more durable than ordinary ladders. The Little Giant is available in heavy-wall aluminum (6005-T5), or non-conductive fiberglass (see selection below). •Designed to reach high places •Replaces platforms and lifts •Safe to use on uneven surfaces, like staircases, curbs or docks •OSHA & ANSI Certified •300 Duty rated

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 86.0000

$ 1,370.47

Shear - Brake & Roll - #SBR-30M - 30'' Working Length - 20 Gauge Capacity (Mild Steel)

Item #: PY60756031
Manufacturer: Jet
Mfg #: 756031

Technical Specifications:
•Bending Capacity: 20 Gauge x 30" •Brand Name: Jet •Capacity-Mild Steel: 20 Gauge •Dimensions: 42-1/2 x 21-1/2 x 24 •Finger Widths: 1, 2, 3, 6, 8, 10 •Model Number: SBR-30M •Rolling Capacity: 20 Gauge x 30" •Type: Shear, Brake & Roll •Weight: 290 lbs •Wire Grooves: 1/8, 3/16, 1/4 •Working Length: 30

Description:
•Combination Shear, Brake & Roll •Shearing cap. (mild steel) 20 Ga. x 30" Bending cap. (mild steel) 20 x 30 Size of slip roll 30"L x 1-1/2"W Number of male dies 6 Width of upper dies (in.) 1, 2, 3, 6, 8, 10" Upper die height 4-3/8" Min. forming radius 3/4 Overall dimensions 42-1/2" L x 21-1/2"W x 28"H Net weight 320 lbs. •Right or left hand operation, SBR-30M includes two handles •Shear can be used for mild steel, aluminum, brass, copper, lead, plastic and zinc •Brake is equipped with easily removable fingers that permit angle, channel, box and other complex •Slip rolls are precision turned and ground with wire grooves

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 319.0000 •Dimensions - Height: 27.0 Length: 18.0 Width: 41.0

$ 1,334.79

HYD AIR PUMP 231 CU W/REMOT SGL ACT

Item #: KP305AS380L
Manufacturer: Williams
Mfg #: 9923370

Technical Specifications:
•Brand Name: Williams

Description:

Shipping Info:
•Actual Weight - 32.0000

$ 2,111.00

ER20 COOLANT COLLET SET-21 PCS

Item #: TE1208320MS
Manufacturer: Techniks
Mfg #: 08320MS

Technical Specifications:
*Brand Name: Techniks *Collet Style/Fits: ER20 *Type: ER Coolant Collet

Description:

Shipping Info:
*Actual Weight - 1.0000

$ 1,368.44

0 - 40" / 0 - 1000mm Measuring Range (.0005" / .01mm Res.) - Electronic Caliper

Item #: NA5554100042
Manufacturer: Fowler
Mfg #: 54-100-042

Technical Specifications:
•Brand Name: Fowler •Hazard Code: HAZ05 •Jaw Depth: 6 •Measuring Range: 0 - 40 / 0 - 1000mm •Model Number: 54-100-042-1 •Resolution: .0005" / 0.01mm •Type: Electronic Caliper

Description:
•RS232C Direct output •Hold feature •Preset mode now includes offset for inside jaws •All sizes feature fine adjustment screw •Inch/metric conversion •Includes wooden case

Shipping Info:
•HAZ 5C •UPS Ground - No Additional Shipping Charges •UPS Air - Cannot Ship Air •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 12.1500 •Dimensions - Height: 1.86 Length: 48.7 Width: 8.00 •Additional handling -$15.00 per item

$ 1,390.34

6.5000 MASTER SETTING RING FLEXBAR

Item #: GG4521462
Manufacturer: Flexbar
Mfg #: 21462

Technical Specifications:
•Brand Name: Flexbar •Model Number: 21462

Description:

Shipping Info:

$ 1,368.95

MULTICLAMP50E/F Other Unique Holder

Item #: TG604504538
Manufacturer: Tungaloy
Mfg #: 4504538

Technical Specifications:
*Brand Name: Tungaloy

Description:

Shipping Info:

$ 1,328.86

HSK-A 63 x PG 25 x 260mm XL HSK-A powRgrip Collet Holder

Item #: GM21886576090
Manufacturer: Rego-Fix
Mfg #: 8865.7609

Technical Specifications:
*Brand Name: Rego-Fix *Collet Style/Fits: PG25 *Gage Length: 260mm *Mount: HSKA63 *Nose Diameter: 40mm *Style: HSK-A powRgrip Collet Holder *Type: Extra Long

Description:
*T.I.R. < 0.0001" (3 µ¼m) *Highest clamping force and transferable force *Surface finish max. Ra 0.25 *Q+ balanced to G 2.5 @ 25000 rpm for HSK holders *Ideal for high speed cutting and high performance cutting *Ready to accept Hi-Q balancing rings which allow to offset the imbalance introduced by the cutting tool up to 80000 min-1

Shipping Info:
*Actual Weight - .2500

$ 1,411.26