ET01 and ET02 - (25001 Products)
Proto® 5 Piece XL Series Groove Joint Pliers Set
Item #: KP4230000
Manufacturer: Proto
Mfg #: J260XLS
Technical Specifications:
•Brand Name: Proto
•Model Number: J260XLS
Description:
•Exclusive Flush Fastener design
•Jaws are milled with deep self-gripping pipe wrench style teeth for maximum bite
•Accurately machined undercut tongue and groove points for precision movement and joint strength
Shipping Info:
•Actual Weight - 6.4400
•Dimensions - Height: 3.60 Length: 18.6 Width: 4.60
Swivel Hook Plate - #LMHP4 - Hook Plate - Fork openings are 6-1/4"W x 1-3/4"H.
Item #: RV54LMHP4S
Manufacturer: Vestil
Mfg #: LM-HP4-S
Technical Specifications:
•Brand Name: Vestil
•Load Capacity: 4000 lbs
•Size: 24 x 13-7/8
•Type: Swivel Hook Plate
Description:
•Heavy-duty solid steel construction
•Double-fork style for use on both fork truck forks
•Usable fork pockets are 6-1/4"W x 1-3/4"H
•Frame includes a safety strap with snap hook to attach unit to carriage of fork truck
•Hooks are manufactured of forged steel and include a safety latch with galvanized finish
•Each unit features a zinc-plated finish
Shipping Info:
•Actual Weight - 26.0000
•Dimensions - Height: 4.00 Length: 25.0 Width: 8.00
9PC 200DA COLLET SET 1/8- 3/8X32NDS
Item #: GM72020109
Manufacturer: Lyndex
Mfg #: 020-109
Technical Specifications:
*Brand Name: Lyndex
Description:
Shipping Info:
*Actual Weight - .9900
10 x 8 x 6" - Machined Webbed (Closed) End Slotted Angle Plate
Item #: NL50C8
Manufacturer: Quality Import
Mfg #:
Technical Specifications:
*Approx Weight: 25 lbs
*Brand Name: Quality Import
*First Angle-B: 8
*Length-A: 10
*Second Angle-C: 6
*Type: Machined Webbed (Closed) End Slotted Angle Plate
Description:
*These Slotted Angle Plates have convenient clamping slots for mounting and are widely used for machining, layout and inspection.
*Material: High quality close-grained gray iron, stress-relieved against distortion by heat-treatment
*Available in machine finish only
*Available in two qualities: American Made or Top Quality Import
*Webbed end angle plates have side webs and are machined square and parallel on outside faces and ends
*Open End Angle Plates are accurately machined square and parallel on the faces
*Giant Slotted Angle Plates are machined on outside faces
Shipping Info:
*Actual Weight - 18.8500
*Dimensions - Height: 7.00 Length: 10.5 Width: 9.00
CIMTECH® 190 - 5 Gallon
Item #: LL5100179P
Manufacturer: Cimcool
Mfg #: 00179-P
Technical Specifications:
•Brand Name: Cimcool
•Hazard Code: HAZ02
•Size: 5 Gallon
Description:
Shipping Info:
•HAZ 02
•UPS Ground - No Additional Shipping Charges
•UPS Air - Additional Charge of $98.00 per Box
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 49.9500
Vertical Table W/Blade Guard for Horizontal Bandsaw - Model #9374
Item #: PV559374
Manufacturer: Ellis
Mfg #: 9374
Technical Specifications:
•Brand Name: Ellis
•Model Number: 9374
Description:
•Accessories for Model 1500 and 1600: Vertical Table with Blade Guard
Shipping Info:
•Actual Weight - 14.1500
Bridgeport Replacement Parts 1182120 Drive Belt
Item #: RL351182120
Manufacturer: Bridgeport
Mfg #: BP 1118212
Technical Specifications:
•Brand Name: Bridgeport
•Description: Drive Belt
•Model Number: 1182120
Description:
•2J V/S Top Housing
•2J Head Assembly For 2 HP
•Belt
Shipping Info:
•Actual Weight - 1.0000
•Dimensions - Height: 1.40 Length: 15.2 Width: 5.10
Slim Casing Live Center MT3
Item #: HK313560003P
Manufacturer: TMX
Mfg #: 3-560-003P
Technical Specifications:
*Brand Name: TMX
*Max. workpiece weight (lbs): 880
*Max. RPM: 7000
*Model Number: 3-560-003P
*Mount: 3 MT
*Overall Length: 5.6299
*Point Diameter: .5906
*Point Length: .7087
*Projection Length: 2.4409
*Shank Diameter: 1.3386
*Style: Slim Casing
*Type: Live Center
*Weight: .9 lbs
Description:
*For counter-clamping workpieces on turning and grinding machines
*Suited for cramped work area between center point and workpiece
*Enlarged work area and better workpiece accessibility thanks to narrow casing diameter
*Maximum rigidity at high speeds
*Maximum concentricity deviation of 0.0002"for maximum precision
Shipping Info:
*Actual Weight - .9000
Shoulder Screws/Stripper Bolt Shim Assortment - Lengthening
Item #: MA5326005
Manufacturer: Precision Brand
Mfg #: 26005
Technical Specifications:
*Box Qty.: 270
*Brand Name: Precision Brand
*Type: Shoulder Screws/Stripper Bolt Shim Assortment - Lengthening
Description:
*15 Pc. Stripper Bolt Shim Assortment Contains:
*Lengthening Shims fit perfectly over the stripper screw threads and under the shoulder which, in effect, lengthens the stripper screw length
*(15) each.005", .015"and .032" for 1/4", 5/16", 3/8", 1/2", 5/8" & 3/4" bolts _ a total of 270 pieces
*Individualsizes available
Shipping Info:
*Actual Weight - .4500
*Dimensions - Height: 1.40 Length: 8.30 Width: 4.40
Zero-Set Attachment
Item #: NB75Z9860
Manufacturer: Procheck
Mfg #:
Technical Specifications:
•Brand Name: Procheck
•Model Number: Z9860
•Type: Zero-Set Attachment
Description:
•Perfect for milling machines, magnetic bases and all measuring set ups
•Fits all dovetail equipped indicators
•Equipped with a spindle post with 1/4" , 3/8" , and 1/2" diam.
•Checks the alignment of the centers of round materials
•Effective measuring range of 3/8" thru 9"
Shipping Info:
•Actual Weight - .6500
•Dimensions - Height: 3.30 Length: 6.80 Width: 3.40
Horizontal/Vertial Angle Collet Fixture - 5C Collet Style
Item #: JN50MSR1
Manufacturer: Quality Import
Mfg #:
Technical Specifications:
*Brand Name: Quality Import
*Collet Style: 5C
*Overall Height: 3-3/4
*Type: Horizontal/Vertical Angle Collet Fixture
Description:
*Angle Collet Fixture
*Uses Standard 5C Collets
*All moving parts hardened, ground and honed
*Collet does not move up or down
*Retains positive relation to the base
*Can be adjusted or changed without disturbing your set-up
*For drilling, milling, grinding, tapping assembly, etc
*A must for every machine shop
*Height 3-3/4"
Shipping Info:
*Actual Weight - 10.4500
*Dimensions - Height: 4.40 Length: 7.30 Width: 4.50
#7 B&S Full Carbide Tipped - Dead Center
Item #: HK2274073
Manufacturer: Riten
Mfg #: 74073
Technical Specifications:
*Accuracy: .0001
*Brand Name: Riten
*Description: Brown & Sharpe Taper
*Half Center Flat Depth: 3/16
*Half Center Flat Length: 1-1/8
*Mount: 7 B & S
*Overall Length: 4-3/8
*Point Diameter: .720
*Point Style: Carbide Tipped
*Shank Diameter: .600
*Shank Length: 2-7/8
*Style: Full
*Tip Diameter: 3/8
*Type: Dead Centers
Description:
*Dead Center
*Accuracy guaranteed to .00005
*Through-harded to 61-63 Rc for extra reginds
*Carbide tipped dead centers are harrdened only on the knockout ends
*Riten full service, repair, and guarantee apply
*Applying a Moly EP632 grease on the point will reduce friction and wear
Shipping Info:
*Actual Weight - .5000
CIMTECH® GL2015 - 5 Gallon
Item #: LL5100186P
Manufacturer: Cimcool
Mfg #: 00186-P
Technical Specifications:
•Brand Name: Cimcool
•Hazard Code: HAZ58
•Size: 5 Gallon
Description:
Shipping Info:
•HAZ 58
•UPS Ground - No Additional Shipping Charges
•UPS Air-No Additional Shipping Charges
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 49.7500
3-3/4 x 1-1/2 x 1-1/4'' - 1/8'' Abrasive Depth - 150 Grit - Type 11V9 Flaring Cup Diamond Wheel
Item #: MP5011500245
Manufacturer: Surf-Pro
Mfg #:
Technical Specifications:
*Bond: Resin
*Brand Name: Surf-Pro
*Concentration: 75
*Depth: 1/8
*Diameter: 3-3/4
*Grit: 150
*Hole Size: 1-1/4
*Type: Flaring Cup Diamond Wheel (Type 11V9)
*Width: 1-1/2
Description:
*U.S.A. Made Diamond Wheels - Product of a Major Manufacturer
*Type 11V9 - Diamond Flaring Cup - Resin Bond Diamond on Periphery & Face For Tool & Cutter Grinders
Shipping Info:
*Actual Weight - .5000
*Dimensions - Height: 2.30 Length: 4.70 Width: 4.40
8 x 1 x 3" - Fine Grit - 8AF - Aluminum Oxide - Bear-Tex Convolute Non-Woven Wheel
Item #: MH62W0855257
Manufacturer: Norton Abrasives
Mfg #: 6626105525
Technical Specifications:
*Arbor Hole: 3
*Brand Name: Norton Abrasives
*Density: 8AF
*Diameter: 8
*Face Width: 1
*Grit: Fine
*Material: Aluminum Oxide
*Maximum RPM: 4,500
*Size: 8 x 1 x 3
*Standard Pack: 25
*Trade Name: Bear-Tex
*Type: Convolute Non-Woven Wheel
Description:
*Fine grit provides a reduced cut rate and is recommended for better finishes and form holding
*Aluminum oxide is a more durable longer lasting abrasive and leaves a more polished finish
*Better choice for general deburring blending, blending and final finishing
*Lubricants such as water-soluble oil and straight oil will decrease the heat and improve the surface finish and luster
*Medium web construction (8 density) for starting point for medium deburring and blending applications
*Convolute wheels are wound around a core and must always be run in the direction of the arrow printed on the side of the wheel
*Durable aluminum reducing bushings are available to accommodate most arbor sizes
Shipping Info:
*Actual Weight - 1.2500
*Dimensions - Height: 1.00 Length: 8.00 Width: 8.00
5/8 x 5/8 x 1-1/4 x 3-1/2 Square 3 Flute Carbide M223 Streaker End Mill-ZrN
Item #: DD4061066
Manufacturer: Imco
Mfg #: 61066
Technical Specifications:
•Brand Name: Imco
•Coating: ZrN
•Flute Length: 1-1/4
•Material: Carbide
•Number of Flutes: 3
•Overall Length: 3-1/2
•Radius: None
•Shank Diameter: 5/8
•Size: 5/8
•Trade Name: M223 Streaker
Description:
•Designed for machining aluminum
•ZrN coated for maximum tool life
Shipping Info:
•Actual Weight - .5075
3/4 x ER16M-140mm - Collet Chuck
Item #: TE1204896
Manufacturer: Techniks
Mfg #: 4896
Technical Specifications:
*Brand Name: Techniks
*Capacity: ER16M
*Chuck Size: 3/4" End Mill / Collet Chuck
*Collets Included: No
*Coolant Supply: Coolant-thru Spindle
*Head Length/Projection: 25mm
*Model Number: 04896
*Mount: 3/4" End Mill / Collet Chuck
*Nut Diameter: 0.87
*Overall Length: 165mm
*Size/Range: .019 - .413
*Spindle Interface: End Mill / Collet Chuck
*Weight: 0.6 lbs
*Wrench Number: TE1204622
Description:
*Techniks Collet Chuck Extensions are precision ground to achieve T.I.R. of 0.0001" or less
* Each holder includes a PowerCOAT Nut for superior holding power
*
Shipping Info:
*Actual Weight - .6000
*Dimensions - Height: 7.00 Length: 1.00 Width: 1.00
Refractometer - #C-BRIX-32
Item #: LK70CRHB32
Manufacturer: Ashburn
Mfg #: C-BRIX-32
Technical Specifications:
•Brand Name: Ashburn
•Type: Refractometer
Description:
•A simple and quick device for measuring the concentration of metalworking fluids
Shipping Info:
•Actual Weight - .5000
•Dimensions - Height: 2.20 Length: 8.10 Width: 3.20
5/8" Dia. - 3-1/2"OAL - MG CBD - Cntr Cut Rough HP EM Multi- 4 FL
Item #: DD8115964
Manufacturer: Rapidkut
Mfg #: :
Technical Specifications:
•Brand Name: Rapidkut
•Coating: Uncoated
•Flute Length: 1-1/4
•Material: Solid Carbide
•Number of Flutes: 4
•Overall Length: 3-1/2
•Shank Diameter: 5/8
•Size: 5/8
•Style: Round Shank
•Type: Roughing End Mills
Description:
•Roughing end mills
•4 Flute, center cutting
•Form relieved on high strength carbide for excellent profile milling
•Made from premium submicron grain carbide
Shipping Info:
•Actual Weight - .5000
•Dimensions - Height: .900 Length: 4.00 Width: .900
CIMCLEAN® 30 Pink - 5 Gallon
Item #: LL5100605P
Manufacturer: Cimcool
Mfg #: 00605-P
Technical Specifications:
•Brand Name: Cimcool
•Hazard Code: HAZ02
•Size: 5 Gallon
Description:
Shipping Info:
•HAZ 02
•UPS Ground - No Additional Shipping Charges
•UPS Air - Additional Charge of $98.00 per Box
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 49.2500