Red Head - 6" Long Adhesive Anchoring Screen - For Use with 1/2 Rods, Stainless Steel

Item #: 06978647
Brand: Red Head
Model #: HB12-6
Exact Tooling IR#: 04

Features and Benefits

Stainless steel is a strong, corrosion-resistant alloy with excellent resistance to heat. It is used in high-stress, outdoor and corrosive applications.

Product Specifications
For Rod Diameter (Inch)	1/2
Material	Stainless Steel
Length (mm)	152.40
Length (Inch)	6
Length (Decimal Inch)	6.0000

Product Specifications

For Rod Diameter (Inch) 1/2

Material Stainless Steel

Length (mm) 152.40

Length (Inch) 6

Length (Decimal Inch) 6.0000

$ 8.00

Red Head - 10" Long Adhesive Anchoring Screen - For Use with 3/8 Rods, Nylon

Item #: 06978563
Brand: Red Head
Model #: HBP38-10
Exact Tooling IR#: 04

Features and Benefits

Nylon is a lightweight, nonconductive material that is resistant to impact, wear and abrasion. It is ideal for electrical applications or where corrosion is a concern.

Product Specifications
For Rod Diameter (Inch)	3/8
Material	Nylon
Length (mm)	254.00
Length (Inch)	10
Length (Decimal Inch)	10.0000

Product Specifications

For Rod Diameter (Inch) 3/8

Material Nylon

Length (mm) 254.00

Length (Inch) 10

Length (Decimal Inch) 10.0000

$ 9.35

Red Head - 6" Long Adhesive Anchoring Screen

Item #: 06978522
Brand: Red Head
Model #: HBP12-6

Product Specifications

For Rod Diameter (Inch) 1/2

Material Nylon

Length (mm) 152.40

Length (Inch) 6

Length (Decimal Inch) 6.0000

$ 7.55

DeWALT Anchors & Fasteners - Drywall & Hollow Wall Anchors Type: Toggle Bolt Material: Steel

Item #: 57303323
Brand: DeWALT Anchors & Fasteners
Model #: 04540-PWR

Features and Benefits

Toggle bolt anchors are used in hollow block, wallboard and plaster. They consist of a machine screw and spring wing toggle that folds back, inserts into a predrilled hole and opens on the other side.

Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.

Product Specifications

Drywall & Hollow Wall Anchors; Type: Toggle Bolt ; Material: Steel ; For Material Type: Wallboard; Plaster; Concrete/Masonry ; Diameter (Inch): 1/2 ; Overall Length (Inch): 3 ; Screw Size (Inch): 1/2

Type Toggle Bolt

Material Steel

For Material Type Wallboard; Plaster; Concrete/Masonry

Diameter (Inch) 1/2

Overall Length (Inch) 3

Screw Size (Inch) 1/2

Maximum Thickness (Inch) 3/4

Material Grade Carbon Steel

Finish/Coating Zinc-Plated

Thread Size (Inch) 1/2-13

For Use With 1/2-13 Screw

$ 128.46

DeWALT Anchors & Fasteners - Drywall & Hollow Wall Anchors Type: Wall Anchor Material: Alloy Steel

Item #: 54798210
Brand: DeWALT Anchors & Fasteners
Model #: 02105-PWR

Features and Benefits

Alloy steel is the strongest of all steel types. It has high tensile strength and offers excellent resistance to wear, fatigue and galling.

Product Specifications

Drywall & Hollow Wall Anchors; Type: Wall Anchor ; Material: Alloy Steel ; For Material Type: Wallboard; Plywood ; Diameter (Inch): 1/8 ; Overall Length (Inch): 1-3/4 ; Screw Size (#): #6

Type Wall Anchor

Material Alloy Steel

For Material Type Wallboard; Plywood

Diameter (Inch) 1/8

Overall Length (Inch) 1-3/4

Screw Size (#) #6

Maximum Thickness (Inch) 1/2

Load Capacity (Lb.) 150.00

Minimum Thickness (Inch) 3/8

Minimum Thickness (Decimal Inch) 0.3750

Finish/Coating Zinc-Plated

Drive Type Hex Socket

Thread Size (Inch) 6-32

$ 68.95

Red Head - 3/8" Steel Anchor Setting Tool

Item #: 07403363
Brand: Red Head
Model #: RT-138

Product Specifications
Type	Setting Tool
For Use With	RM-38 Type Anchor
Size	3/8
Material	Steel
Additional Information	HVAC/Fire sprinkler plumber (pipe-fitter) application
PSC Code	5306

$ 9.75

DeWALT Anchors & Fasteners - 1/2" Caulk-In Anchor Setting Tool

Item #: 84971712
Brand: DeWALT Anchors & Fasteners
Model #: 09241-PWR

Product Specifications
Type	Caulk-In Setting Tool
For Use With	1/2-13 Caulk-In Anchor
Size	1/2

$ 33.62

DeWALT Anchors & Fasteners - Drywall & Hollow Wall Anchors Type: Toggle Bolt Material: Steel

Item #: 38123584
Brand: DeWALT Anchors & Fasteners
Model #: 04020-PWR

Features and Benefits

Toggle bolt anchors are used in hollow block, wallboard and plaster. They consist of a machine screw and spring wing toggle that folds back, inserts into a predrilled hole and opens on the other side.

Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.

Product Specifications

Drywall & Hollow Wall Anchors; Type: Toggle Bolt ; Material: Steel ; For Material Type: Wallboard; Plaster; Concrete/Masonry ; Diameter (Inch): 3/16 ; Overall Length (Inch): 3 ; Screw Size (Inch): 3/16

Type Toggle Bolt

Material Steel

For Material Type Wallboard; Plaster; Concrete/Masonry

Diameter (Inch) 3/16

Overall Length (Inch) 3

Screw Size (Inch) 3/16

Maximum Thickness (Inch) 3/4

Material Grade Carbon Steel

Finish/Coating Zinc-Plated

Thread Size (Inch) 10-24

For Use With 10-24 Screw

$ 59.41

DeWALT Anchors & Fasteners - Drywall & Hollow Wall Anchors Type: Toggle Bolt Material: Steel

Item #: 32527731
Brand: DeWALT Anchors & Fasteners
Model #: 04430-PWR

Features and Benefits

Toggle bolt anchors are used in hollow block, wallboard and plaster. They consist of a machine screw and spring wing toggle that folds back, inserts into a predrilled hole and opens on the other side.

Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.

Product Specifications

Drywall & Hollow Wall Anchors; Type: Toggle Bolt ; Material: Steel ; For Material Type: Wallboard; Plaster; Concrete/Masonry ; Diameter (Inch): 3/8 ; Overall Length (Inch): 3 ; Screw Size (Inch): 3/8

Type Toggle Bolt

Material Steel

For Material Type Wallboard; Plaster; Concrete/Masonry

Diameter (Inch) 3/8

Overall Length (Inch) 3

Screw Size (Inch) 3/8

Maximum Thickness (Inch) 3/4

Material Grade Carbon Steel

Finish/Coating Zinc-Plated

Thread Size (Inch) 3/8-16

For Use With 3/8-16 Screw

$ 69.81

Vestil - Concrete Anchors Type: Sleeve Diameter (Inch): 3/4

Item #: 64533177
Brand: Vestil
Model #: AS-344-4PK

Features and Benefits

Sleeve concrete anchors are used in brick, concrete and grout-filled or hollow concrete block. They have an internal expander that pulls up and expands the anchor s sleeve when the anchor s nut is tightened. This increases holding power.

Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.

Product Specifications

Concrete Anchors; Type: Sleeve ; Diameter (Inch): 3/4 ; Drill Size (Inch): 3/4 ; Overall Length (Inch): 4 ; Material: Steel ; Material Grade: Not Graded

Type Sleeve

Diameter (Inch) 3/4

Drill Size (Inch) 3/4

Overall Length (Inch) 4

Material Steel

Material Grade Not Graded

Finish/Coating Zinc-Plated

Head Type Hex Nut

System of Measurement Inch

$ 23.01

DeWALT Anchors & Fasteners - 3/4" Steel Anchor Setting Tool

Item #: 68012566
Brand: DeWALT Anchors & Fasteners
Model #: 06313-PWR

Product Specifications
Type	Setting Tool
For Use With	3/4 Inch Drop-In Anchor
Size	3/4
Material	Steel

$ 16.83

Red Head - 1/4" Steel Anchor Setting Tool

Item #: 07403348
Brand: Red Head
Model #: RT-114

Product Specifications
Type	Setting Tool
For Use With	RM-14 Type Anchor
Size	1/4
Material	Steel
Additional Information	HVAC/Fire sprinkler plumber (pipe-fitter) application

$ 10.38

Flat Eye & Eye, Type 3 Web Sling: 30' Long, 1" Wide, 1600 lb Vertical Capacity, Polyester

Item #: 05962774
Brand: Liftex
Model #: FBE191X30PD

Product Specifications

Sling Type Flat Eye & Eye, Type 3

Sling Material Polyester

Sling Length (Feet) 30

Sling Width (Inch) 1

Number of Legs 1

Leg Length (Inch) 30

Vertical Capacity (Lb.) 1600

Choker Capacity (Lbs) 1250

Basket Capacity (Lbs) 3200

Number Of Plies 1

Color Yellow

$ 26.21

Vestil - Concrete Anchors Type: Sleeve Diameter (Inch): 3/4

Item #: 82035718
Brand: Vestil
Model #: AS-346

Features and Benefits

Sleeve concrete anchors are used in brick, concrete and grout-filled or hollow concrete block. They have an internal expander that pulls up and expands the anchor s sleeve when the anchor s nut is tightened. This increases holding power.

Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.

Product Specifications

Concrete Anchors; Type: Sleeve ; Diameter (Inch): 3/4 ; Drill Size (Inch): 3/4 ; Overall Length (Inch): 6 ; Material: Steel ; Material Grade: Not Graded

Type Sleeve

Diameter (Inch) 3/4

Drill Size (Inch) 3/4

Overall Length (Inch) 6

Material Steel

Material Grade Not Graded

Finish/Coating Zinc-Plated

Head Type Hex Nut

For Use With Installing Molded Bumpers into Concrete

System of Measurement Inch

$ 15.55

Corner Chamfer End Mill: 7.50 mm Dia, 21.00 mm LOC, 2 Flute, 0.10 mm Chamfer Width, Solid Carbide

Item #: 04846549
Brand: WNT
Model #: 5363107800

Product Specifications

Mill Diameter (mm) 7.50

Number Of Flutes 2

Length of Cut (mm) 21.00

Single Or Double End Single

End Mill Material Solid Carbide

Coating/Finish PCD

Centercutting No

Flute Direction Right Hand

Variable Index No

Variable Helix Yes

Cutting Direction Right Hand

Chamfer Width (mm) 0.10

Overall Length (mm) 80.00

Coolant Through No

Chipbreaker No

Chamfer Angle 45.000

Length Type Medium

Flute Type Variable

Extended Reach No

Shank Type Straight-Cylindrical

Shank Diameter (mm) 8.00

Neck Diameter (mm) 7.200

UNSPSC Code 23241614

Series 53631

$ 50.78

DeWALT Anchors & Fasteners - Adhesive Anchoring Screens & Tubes For Rod Diameter (Inch): 3/8 Material: Stainless Steel

Item #: 94164167
Brand: DeWALT Anchors & Fasteners
Model #: 07963-PWR

Features and Benefits

Stainless steel is a strong, corrosion-resistant alloy with excellent resistance to heat. It is used in high-stress, outdoor and corrosive applications.

Product Specifications

Adhesive Anchoring Screens & Tubes; For Rod Diameter (Inch): 3/8 ; Material: Stainless Steel ; Length (Inch): 8 ; Length (Decimal Inch): 8.0000

For Rod Diameter (Inch) 3/8

Material Stainless Steel

Length (Inch) 8

Length (Decimal Inch) 8.0000

$ 447.67

DeWALT Anchors & Fasteners - Threaded Rod Anchors Mount Type: Vertical (End Drilled) For Material Type: Wood; Concrete

Item #: 16813974
Brand: DeWALT Anchors & Fasteners
Model #: PFM2521300

Product Specifications

Threaded Rod Anchors; Mount Type: Vertical (End Drilled) ; For Material Type: Wood; Concrete ; For Rod Size (Inch): 3/4 ; Material: Steel & Plastic ; Finish/Coating: Zinc-Plated ; Ultimate Pullout (Lb.): 7,350.00

Mount Type Vertical (End Drilled)

For Material Type Wood; Concrete

For Rod Size (Inch) 3/4

Material Steel & Plastic

Finish/Coating Zinc-Plated

Ultimate Pullout (Lb.) 7350.00

Diameter (Inch) 3/4

Length (Inch) 2

Fastener Standard ICC ESR-3657; 2018 IBC; 2018 IRC; 2015 IBC; 2015 IRC; 2012 IBC; 2012 IRC; 2009 IBC; 2009 IRC; ASTM E488; ICC-ES AC446

$ 676.17

DeWALT Anchors & Fasteners - Anchor Accessories Type: Piston Plug for Adhesive Anchoring For Use With: Adhesive & Threaded Rod

Item #: 94169000
Brand: DeWALT Anchors & Fasteners
Model #: PFC1691560

Product Specifications

Anchor Accessories; Type: Piston Plug for Adhesive Anchoring ; For Use With: Adhesive & Threaded Rod ; Size: 1-3/8 ; Material: Plastic ; Number of Pieces: 10 ; For Use with AnchorSize: 1-3/8

Type Piston Plug for Adhesive Anchoring

For Use With Adhesive & Threaded Rod

Size 1-3/8

Material Plastic

Number of Pieces 10

For Use with AnchorSize 1-3/8

$ 321.17

Corner Radius End Mill: 10.00 mm Dia, 20.00 mm LOC, Hardmax Coated, Corner Radius End, Centercutting Series HXLRS

Item #: 09445032
Brand: US Union Tool
Model #: 2515100

Product Specifications

Mill Diameter (mm) 10.00

Number Of Flutes 5

Length of Cut (mm) 20.00

End Mill Material Solid Carbide

Coating/Finish Hardmax

Centercutting Yes

Flute Direction Right Hand

Cutting Direction Right Hand

Corner Radius (mm) 0.50

Overall Length (mm) 80

Chipbreaker No

End Type Corner Radius

Length Of Cut (Decimal Inch - 4 Decimals) 1.2500

Length Type Long

Extended Reach No

Shank Diameter (mm) 10.00

Mill Diameter Tolerance -0.03

Shank Diameter Tolerance -0.005

UNSPSC Code 27112803

Material Grade Super MG

Series HXLRS

$ 224.33

DeWALT Anchors & Fasteners - Adhesive Anchoring Screens & Tubes For Rod Diameter (Inch): 3/4 Material: Stainless Steel

Item #: 94163946
Brand: DeWALT Anchors & Fasteners
Model #: 07978-PWR

Features and Benefits

Stainless steel is a strong, corrosion-resistant alloy with excellent resistance to heat. It is used in high-stress, outdoor and corrosive applications.

Product Specifications

Adhesive Anchoring Screens & Tubes; For Rod Diameter (Inch): 3/4 ; Material: Stainless Steel ; Length (Inch): 17 ; Length (Decimal Inch): 17.0000

For Rod Diameter (Inch) 3/4

Material Stainless Steel

Length (Inch) 17

Length (Decimal Inch) 17.0000

$ 303.43

Type	Toggle Bolt
Material	Steel
For Material Type	Wallboard; Plaster; Concrete/Masonry
Diameter (Inch)	1/2
Overall Length (Inch)	3
Screw Size (Inch)	1/2
Maximum Thickness (Inch)	3/4
Material Grade	Carbon Steel
Finish/Coating	Zinc-Plated
Thread Size (Inch)	1/2-13
For Use With	1/2-13 Screw

Type	Wall Anchor
Material	Alloy Steel
For Material Type	Wallboard; Plywood
Diameter (Inch)	1/8
Overall Length (Inch)	1-3/4
Screw Size (#)	#6
Maximum Thickness (Inch)	1/2
Load Capacity (Lb.)	150.00
Minimum Thickness (Inch)	3/8
Minimum Thickness (Decimal Inch)	0.3750
Finish/Coating	Zinc-Plated
Drive Type	Hex Socket
Thread Size (Inch)	6-32

Type	Sleeve
Diameter (Inch)	3/4
Drill Size (Inch)	3/4
Overall Length (Inch)	4
Material	Steel
Material Grade	Not Graded
Finish/Coating	Zinc-Plated
Head Type	Hex Nut
System of Measurement	Inch

Sling Type	Flat Eye & Eye, Type 3
Sling Material	Polyester
Sling Length (Feet)	30
Sling Width (Inch)	1
Number of Legs	1
Leg Length (Inch)	30
Vertical Capacity (Lb.)	1600
Choker Capacity (Lbs)	1250
Basket Capacity (Lbs)	3200
Number Of Plies	1
Color	Yellow

Mill Diameter (mm)	7.50
Number Of Flutes	2
Length of Cut (mm)	21.00
Single Or Double End	Single
End Mill Material	Solid Carbide
Coating/Finish	PCD
Centercutting	No
Flute Direction	Right Hand
Variable Index	No
Variable Helix	Yes
Cutting Direction	Right Hand
Chamfer Width (mm)	0.10
Overall Length (mm)	80.00
Coolant Through	No
Chipbreaker	No
Chamfer Angle	45.000
Length Type	Medium
Flute Type	Variable
Extended Reach	No
Shank Type	Straight-Cylindrical
Shank Diameter (mm)	8.00
Neck Diameter (mm)	7.200
UNSPSC Code	23241614
Series	53631

Mount Type	Vertical (End Drilled)
For Material Type	Wood; Concrete
For Rod Size (Inch)	3/4
Material	Steel & Plastic
Finish/Coating	Zinc-Plated
Ultimate Pullout (Lb.)	7350.00
Diameter (Inch)	3/4
Length (Inch)	2
Fastener Standard	ICC ESR-3657; 2018 IBC; 2018 IRC; 2015 IBC; 2015 IRC; 2012 IBC; 2012 IRC; 2009 IBC; 2009 IRC; ASTM E488; ICC-ES AC446

Type	Piston Plug for Adhesive Anchoring
For Use With	Adhesive & Threaded Rod
Size	1-3/8
Material	Plastic
Number of Pieces	10
For Use with AnchorSize	1-3/8

Mill Diameter (mm)	10.00
Number Of Flutes	5
Length of Cut (mm)	20.00
End Mill Material	Solid Carbide
Coating/Finish	Hardmax
Centercutting	Yes
Flute Direction	Right Hand
Cutting Direction	Right Hand
Corner Radius (mm)	0.50
Overall Length (mm)	80
Chipbreaker	No
End Type	Corner Radius
Length Of Cut (Decimal Inch - 4 Decimals)	1.2500
Length Type	Long
Extended Reach	No
Shank Diameter (mm)	10.00
Mill Diameter Tolerance	-0.03
Shank Diameter Tolerance	-0.005
UNSPSC Code	27112803
Material Grade	Super MG
Series	HXLRS