1/2" Opening - "J" Drive - Standard Box End - Pre-Set Torque Head

Item #: KL45TCQJX16A
Manufacturer: CDI
Mfg #: 9934727

Technical Specifications:
•Brand Name: CDI •Class: Wrench •Description: Drive Head for Pre-Set Torque Wrench •Drive: J-(0.425) •Size: 1/2 •Type: Box End

Description:
•12-Pt. Box End Heads SAE

Shipping Info:
•Actual Weight - .0796

$ 187.70

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 1/4" Drive Electronic Torque Tester 5-50 in-lbs

Item #: KP4220205
Manufacturer: Proto
Mfg #: J6470

Technical Specifications:
•Brand Name: Proto •Head Height: 4-1/2 •Length: 6 •Maximum Output: 50 •Model Number: J6470 •Width: 6

Description:
•Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required. •Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions. •Broad accuracy range extends from 10% to 100% of full scale. •Three units of measure are available ft-lb, in-lb, and Nm. •Three operating modes: Track Mode, Peak Hold and First Peak (for use with Click-style Torque wrenches). •Fast sampling rate helps maintain high accuracy during torque applications. •Each tester is built with a male square drive and also comes supplied with a female-to-female square drive adapter. •Powered by a standard 9V battery, providing up to 50 hours run time. •N.I.S.T. (National Institute of Standards and Technology) traceable certification supplied with each tester. •Optional all-steel stand (J6470S) provides a strong support with minimal footprint. •Testers meet or exceed requirements set forth in ASME B107.29

Shipping Info:
•Actual Weight - 5.7800 •Dimensions - Height: 7.50 Length: 8.80 Width: 8.30

$ 1,662.56

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 13/16" Open End Torque Wrench Head - H7 Tang

Item #: KP4219990
Manufacturer: Proto
Mfg #: JH7-26

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH7-250F, JH7-6014C •Head Height: 13/16 •Length: 5-17/32 •Maximum Output: 1965 •Model Number: JH7-26 •Size: 13/16 •Width: 1-23/32

Description:
•Open end is angled to 15° to help keep shank clear of obstructions helping to improve access.

Shipping Info:
•Actual Weight - .4600 •Dimensions - Height: .800 Length: 5.50 Width: 1.70

$ 82.21

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 9/16" Box End Torque Wrench Head - H5 Tang

Item #: KP4219610
Manufacturer: Proto
Mfg #: JH5-18B

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH5-100F, JH5-6006C, JH5-150FPS, JH5-200FPS •Head Height: 5/8 •Length: 3-25/32 •Maximum Output: 1340 •Model Number: JH5-18B •Size: 9/16 •Width: 27/32

Description:
•The Proto® TorquePlus™ Design, a high performance drive configuration which allows for quick and easy wrench engagement with the fastener flats, not the corners. •12 point box end allows for fine indexing, helping to improve speed and access. •Fits 4, 6 and 12 point fasteners. •Indexed to 7.5° to help keep shank clear of obstructions by allowing the user to flip the wrench over to continue turning the fastener. •Countersunk on both sides to allow for easy application to the fastener.

Shipping Info:
•Actual Weight - .1700 •Dimensions - Height: .600 Length: 3.80 Width: .900

$ 81.29

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/16" Opening - "J" Drive - Open End - Pre-Set Torque Head

Item #: KL45TCQJO10A
Manufacturer: CDI
Mfg #: TCQJO10A

Technical Specifications:
•Brand Name: CDI •Class: Wrench •Description: Drive Head for Pre-Set Torque Wrench •Drive: J-(0.425) •Size: 5/16 •Type: Open End

Description:
•Open End-SAE Pre-Set Torque Heads

Shipping Info:
•Actual Weight - .0620

$ 101.06

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 1" Open End Torque Wrench Head - H7 Tang

Item #: KP4220005
Manufacturer: Proto
Mfg #: JH7-32

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH7-250F, JH7-6014C •Head Height: 13/16 •Length: 5-21/32 •Maximum Output: 3575 •Model Number: JH7-32 •Size: 1 •Width: 2-3/32

Description:
•Open end is angled to 15° to help keep shank clear of obstructions helping to improve access.

Shipping Info:
•Actual Weight - .6100 •Dimensions - Height: .800 Length: 5.70 Width: 2.10

$ 91.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Replacement Sq Drive for TM-393 & TM-493

Item #: KL45TM393RSD
Manufacturer: CDI
Mfg #: 9261342

Technical Specifications:
•Brand Name: CDI •Class: Wrench •Type: Torque Multiplier - Replacement Square

Description:

Shipping Info:
•Actual Weight - .6000

$ 241.05

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1-7/8" Opening - "Y" Drive - Open End - Pre-Set Torque Head

Item #: KL45TCQYO60A
Manufacturer: CDI
Mfg #: TCQYO60A

Technical Specifications:
•Brand Name: CDI •Class: Wrench •Description: Drive Head for Pre-Set Torque Wrench •Drive: Y-(0.560) •Size: 1-7/8 •Type: Open End

Description:
•Open End-SAE Pre-Set Torque Heads

Shipping Info:
•Actual Weight - 1.8521

$ 588.57

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 18mm Box End Torque Wrench Head - H5 Tang

Item #: KP4219675
Manufacturer: Proto
Mfg #: JH5-18MB

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH5-100F, JH5-6006C, JH5-150FPS, JH5-200FPS •Head Height: 5/8 •Length: 3-29/32 •Maximum Output: 2400 •Model Number: JH5-18MB •Size: 10mm •Width: 1-1/16

Description:
•The Proto® TorquePlus™ Design, a high performance drive configuration which allows for quick and easy wrench engagement with the fastener flats, not the corners. •12 point box end allows for fine indexing, helping to improve speed and access. •Fits 4, 6 and 12 point fasteners. •Indexed to 7.5° to help keep shank clear of obstructions by allowing the user to flip the wrench over to continue turning the fastener. •Countersunk on both sides to allow for easy application to the fastener.

Shipping Info:
•Actual Weight - .2300 •Dimensions - Height: 1.10 Length: 3.90 Width: .700

$ 83.15

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 1/2" Drive Digital Torque and Angle Adapter 12.5-250.7 ft-lbs

Item #: KP4215000
Manufacturer: Proto
Mfg #: J6280TA250

Technical Specifications:
•Brand Name: Proto •Length: 3-23/64 •Maximum Output: 3009 •Model Number: J6280TA250

Description:
•Torque and angle tightening with one tool: productivity improvement, digital display minimizes reading errors, and delivers high precision. •+/-2° (rotating 90° at speed of 30° / sec) for angle accuracy. •+/-3% clockwise or +/-4% counter clockwise for torque accuracy. •LEDs for easy viewing of results and audible beep when desired level is reached. •Buzzer and LED indicator for the 9 pre-settable target torques or angles. •Five Units Selectable (N.m, ft-lb, in.lb, kg.cm, degree). •50 data memory for recall and joint torque-angle auditing. •Auto Sleep after about 2 minutes idle. •Both AAA and rechargeable batteries are compatible.

Shipping Info:
•Actual Weight - 1.3500 •Dimensions - Height: 4.20 Length: 5.80 Width: 5.10

$ 409.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 11mm Box End Torque Wrench Head - H4 Tang

Item #: KP4219535
Manufacturer: Proto
Mfg #: JH4-11MB

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH4-250, JH4-150PS, JH4-50FPS •Head Height: 7/16 •Length: 3-1/16 •Maximum Output: 715 •Model Number: JH4-11MB •Size: 10mm •Width: 21/32

Description:
•The Proto® TorquePlus™ Design, a high performance drive configuration which allows for quick and easy wrench engagement with the fastener flats, not the corners. •12 point box end allows for fine indexing, helping to improve speed and access. •Fits 4, 6 and 12 point fasteners. •Indexed to 7.5° to help keep shank clear of obstructions by allowing the user to flip the wrench over to continue turning the fastener. •Countersunk on both sides to allow for easy application to the fastener.

Shipping Info:
•Actual Weight - .0900 •Dimensions - Height: .500 Length: 3.10 Width: .700

$ 80.35

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 1-3/8" Box End Torque Wrench Head - H7 Tang

Item #: KP4219875
Manufacturer: Proto
Mfg #: JH7-44B

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH7-250F, JH7-6014C •Head Height: 13/16 •Length: 5-15/16 •Maximum Output: 3600 •Model Number: JH7-44B •Size: 1-3/8 •Width: 1-31/32

Description:
•The Proto® TorquePlus™ Design, a high performance drive configuration which allows for quick and easy wrench engagement with the fastener flats, not the corners. •12 point box end allows for fine indexing, helping to improve speed and access. •Fits 4, 6 and 12 point fasteners. •Indexed to 7.5° to help keep shank clear of obstructions by allowing the user to flip the wrench over to continue turning the fastener. •Countersunk on both sides to allow for easy application to the fastener.

Shipping Info:
•Actual Weight - .8600 •Dimensions - Height: .800 Length: 5.90 Width: 2.00

$ 212.42

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 19mm Open End Torque Wrench Head - H5 Tang

Item #: KP4219785
Manufacturer: Proto
Mfg #: JH5-19M

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH5-100F, JH5-6006C, JH5-150FPS, JH5-200FPS •Head Height: 5/8 •Length: 3-15/16 •Maximum Output: 1650 •Model Number: JH5-19M •Size: 10mm •Width: 1-19/32

Description:
•Open end is angled to 15° to help keep shank clear of obstructions helping to improve access.

Shipping Info:
•Actual Weight - .2600 •Dimensions - Height: .600 Length: 4.00 Width: 1.60

$ 85.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/4" Box End Torque Wrench Head - H5 Tang

Item #: KP4219625
Manufacturer: Proto
Mfg #: JH5-24B

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH5-100F, JH5-6006C, JH5-150FPS, JH5-200FPS •Head Height: 5/8 •Length: 3-15/16 •Maximum Output: 2400 •Model Number: JH5-24B •Size: 3/4 •Width: 1-1/8

Description:
•The Proto® TorquePlus™ Design, a high performance drive configuration which allows for quick and easy wrench engagement with the fastener flats, not the corners. •12 point box end allows for fine indexing, helping to improve speed and access. •Fits 4, 6 and 12 point fasteners. •Indexed to 7.5° to help keep shank clear of obstructions by allowing the user to flip the wrench over to continue turning the fastener. •Countersunk on both sides to allow for easy application to the fastener.

Shipping Info:
•Actual Weight - .2300 •Dimensions - Height: .700 Length: 4.00 Width: 1.10

$ 91.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 1/2" Drive Ratcheting Head Micrometer Torque Wrench 30-150 ft-lbs

Item #: KP4220795
Manufacturer: Proto
Mfg #: J6016CXCER

Technical Specifications:
•Brand Name: Proto •Description: Yes •Finish: Full Polish •Length: 20-43/64 •Model Number: J6016CXCERT

Description:
•Calibrated to +/- 4% in clockwise direction and +/- 6% in counter clockwise direction. •Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity. •Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology). CERT Version Only. •Manufactured to meet precision/highly accurate applications such as military and aerospace.

Shipping Info:
•Actual Weight - 5.3300 •Dimensions - Height: 2.50 Length: 26.1 Width: 3.00

$ 377.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

13/16" Opening - "J" Drive - Standard Box End - Pre-Set Torque Head

Item #: KL45TCQJX26A
Manufacturer: CDI
Mfg #: 9934772

Technical Specifications:
•Brand Name: CDI •Class: Wrench •Description: Drive Head for Pre-Set Torque Wrench •Drive: J-(0.425) •Size: 13/16 •Type: Box End

Description:
•12-Pt. Box End Heads SAE

Shipping Info:
•Actual Weight - .1634

$ 189.57

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/8" Drive Dial Torque Wrench 120-600 in-lbs, 140-700 cm kg

Item #: KP4221005
Manufacturer: Proto
Mfg #: J6181F

Technical Specifications:
•Brand Name: Proto •Finish: Full Polish •Length: 10 •Maximum Output: 600 •Model Number: J6181F

Description:
•6-30 in-lbs thru 120-600 in-lbs / 7-35 cm kg thru 140-700 cm kg. •Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale. •Industrial all steel or aluminum torque transfer components. •High alloy torsion drive design " accuracy not effected by hand position. •Dual scale (English/Metric) with clockwise and counterclockwise operation " fewer wrenches needed to complete job. •Memory needles are standard on all wrenches except electric light models. •Easy-to-read, high contrast scale. •Laser marked serial number for traceability. •N.I.S.T. (National Institute of Standards and Technology) traceable CW certification supplied with each wrench.

Shipping Info:
•Actual Weight - 1.9700 •Dimensions - Height: 3.20 Length: 11.1 Width: 5.50

$ 307.66

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

7/16" Drive - 12 Point - Ratchet Head "J" - Interchangeable Head

Item #: KL45TCQJBOER14
Manufacturer: CDI
Mfg #: 9973900

Technical Specifications:
•Brand Name: CDI •Size: 7/16 •Style: Interchangeable Head •Type: Torque

Description:
•Interchangeable heads permit ratcheting, fixed, or open end torquing capability with adjustable torque wrench bodies •A push of the locking pin provides quick-change action, with a wide range of head styles to choose from •Black oxide finish

Shipping Info:
•Actual Weight - 1.0582

$ 81.38

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

22mm Opening - "J" Drive - Open End - Pre-Set Torque Head

Item #: KL45TCQJOM22A
Manufacturer: CDI
Mfg #: 9934277

Technical Specifications:
•Brand Name: CDI •Class: Wrench •Description: Drive Head for Pre-Set Torque Wrench •Drive: J-(0.425) •Metric: 22 •Type: Open End

Description:

Shipping Info:
•Actual Weight - .2736

$ 121.89

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® Pre-Set Interchangeable Head Torque Wrench Assembly 10-50 ft-lbs - H4 Tang

Item #: KP4220270
Manufacturer: Proto
Mfg #: JH4-50FPS

Technical Specifications:
•Brand Name: Proto •Head Height: 1-1/2 •Length: 11 •Model Number: JH4-50FPS •Width: 1-1/2

Description:
•Full interface with Proto® Interchangeable Head Attachments. •Accuracy of +/-4% CW and +/-6% CCW. •Pre-set for fixed and repeatable torque applications. •Click-type operation for audible click. •Soft, comfortable grip.

Shipping Info:
•Actual Weight - 1.5100 •Dimensions - Height: 1.70 Length: 11.0 Width: 1.80

$ 189.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It