Indexable & Solid Milling Tools For Sale | Exact Tooling - (25001 Products)
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.1627NC
Item #: 29687365
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.1627NC
Product Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+.00002/-.00000
Blank Number Wire Size
#0
Inner Diameter (Decimal Inch)
0.1627
Calibrated
Yes
Traceability Certification Included
NIST
Go/No Go
No Go
Standards
B47.1 Gage Standards; ASME B89.1.6
$ 443.77
Corner Rounding End Mills - 0.0500″ Radius × 0.2500″ (1/4″) Pilot Diameter Carbide Corner Rounding End Mill DE, 4 Flutes, AlTiN Coated
Item #: GE9044050C3
Brand: Harvey Tool
Model #: 44050-C3
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Flute Count (NOF) | 4 |
| Overall Length (OAL) | 2-1/2″ |
| Corner Radius (RE) | 0.05″ |
| Cutting Edge Material | Carbide |
| End Shape | Concave |
| Coating | AlTiN |
| Measurement Type | Inch |
$ 82.80
1.2 mm Dia. × 4 mm Shank × 3.5 mm DOC × 50 mm OAL, Carbide AlTiN, 3 Flute, Ballnose End Mill
Item #: GE90974827C3
Brand: Harvey Tool
Model #: 974827-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1.2 mm |
| Flute Count (NOF) | 3 |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| Applicable Material | Steel |
| Depth of Cut Maximum (APMX) | 3.5 mm |
| Length Group | 3D |
| Overall Length (OAL) | 50 mm |
| End Shape | Ball Nose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.0472″ |
| Coating | AlTiN |
| Measurement Type | Metric |
$ 44.66
End Mills - Reduced Shank End Mills - 0.1562″ (5/32″) Cutter Diameter × 0.2350″ Length of Cut Carbide Reduce Shank Square End Mill, 2 Flutes, AlTiN Coated
Item #: GE90907810C3
Brand: Harvey Tool
Model #: 907810-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/32″ |
| Coating | AlTiN |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Flute Count (NOF) | 2 |
| Depth of Cut Maximum (APMX) | 0.235″ |
| End Shape | Square |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.15625″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
$ 102.89
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-1.2089M
Item #: 99344277
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-1.2089M
Product Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.000015/-0.000015
Blank Number Wire Size
#5
Inner Diameter (Decimal Inch)
1.2089
Calibrated
No
Traceability Certification Included
No
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
$ 653.40
3/8″ × 3/8″ × 1 1/2″ × 4″ 5 Flute 0.0150″ C/R Carbide End Mill-Plain Shank - Y-Coating
Item #: YG33UGMG34S983
Brand: YG-1 Cutting Tools
Model #: UGMG34S983
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Shank Type | Plain |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Applicable Material | Stainless Steel | Super-Alloys / Titanium |
| Overall Length (OAL) | 4″ |
| Corner Radius (RE) | 0.015″ |
| Cutting Edge Material | Carbide |
| Tool Type | 5 Flute Corner Radius |
| Coating | Y-Coating |
| Decimal Equivalent | 0.375″ |
| Flute Count (NOF) | 5 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | Variable |
| Series/List # | UGMG34 |
$ 75.83
12851 1/2X1/2X1X3
Item #: CR1012851
Brand: Melin Tool Co
Model #: 12851
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 1″ |
| Style | General Purpose |
| Overall Length (OAL) | 3″ |
| End Shape | Square End |
| Flute Count (NOF) | 1 |
| Series/List # | PRMG |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
$ 88.23
12843 1/4X1/4X3/8X2-1/2
Item #: CR1012843
Brand: Melin Tool Co
Model #: 12843
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 3/8″ |
| Style | General Purpose |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Square End |
| Flute Count (NOF) | 1 |
| Series/List # | PRMG |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
$ 33.81
H6568 20MMX20MMX36MM
Item #: CR10H6568
Brand: Melin Tool Co
Model #: H6568
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 20 mm |
| Flute Count (NOF) | 5 |
| Connection Diameter Machine Side (DCONMS) | 20 mm |
| Usable Length (LU) | 36 mm |
| Depth of Cut Maximum (APMX) | 42 mm |
| Corner Radius (RE) | 2 mm |
| Overall Length (OAL) | 100 mm |
| Tool Type | High Performance |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.7874″ |
| Coating | nACRo |
| Series/List # | VXMG5T |
$ 320.43
0.5000″ (1/2″) Cutter Diameter × 0.0200″ Width × 0.7500″ (3/4″) Neck Length Carbide Square Standard Keyseat Cutter, 8 Flutes, AlTiN Coated
Item #: GE9022605C3
Brand: Harvey Tool
Model #: 22605-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Cutting Width (CW) | 0.02″ |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 3″ |
| Coating | AlTiN |
$ 131.85
4.5 mm Dia. × 6 mm Shank × 16 mm DOC × 50 mm OAL, Carbide TiN, Spiral , 2 Flute, 30° Helix, Ballnose End Mill
Item #: DD9048699
Brand: KYOCERA SGS Precision Tools
Model #: 48699
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 4.5 mm |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 16 mm |
| Usable Length (LU) | 34 mm |
| Overall Length (OAL) | 50 mm |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Style | Ball Nose |
| Coating | TiN |
| Decimal Equivalent | 0.1772″ |
$ 50.08
3/8″ × 3/8″ × 1-1/8″ × 3″ RHS / RHC Solid Carbide 2-Flute Square End Single End General Purpose End Mill - TiAlN
Item #: CE60C81045
Brand: Cleveland
Model #: C81045
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Tool Type | End Mill |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Length Group | Long |
| Depth of Cut Maximum (APMX) | 1-1/8″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.375″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TiAlN |
| Series/List # | CEM-SE-2-TA |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
| End Shape | Corner Radius |
$ 87.06
Engraving Cutters - 0.1250″ (1/8″) Shank Diameter × 0.0050″ Radius × 15° included Carbide Radius Engraver, 1 Flute, AlTiN Coated
Item #: GE90952910C3
Brand: Harvey Tool
Model #: 952910-C3
| Product Specifications | |
|---|---|
| Angle | 15 Degrees |
| End Shape | Tip Radius |
| Coating | AlTiN |
| Overall Length (OAL) | 1-1/2″ |
| Depth of Cut Maximum (APMX) | 0.08″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Cutting Edge Material | Carbide |
| Tool Type | Engraving Cutter |
$ 33.34
SC FIN 4FL 1/2X1/2X1.1/4X3
Item #: WK402398567
Brand: Widia
Model #: 2398567
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Shank Type | Weldon |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| End Shape | Chamfer |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Usable Length (LU) | 1-1/4″ |
| Overall Length (OAL) | 3″ |
| Corner Chamfer Width (CHW) | 0.02″ |
| Cutting Edge Material | Carbide |
| Grade | TIALN-LW |
| Coating | AlTiN |
| Flute Type | Unequal Flute Spacing |
| Flute Count (NOF) | 4 |
| Style | 82-01 SEM Side Cutting |
| Flute Helix Angle (FHA) | CW|38 Degrees |
| Decimal Equivalent | 0.5″ |
$ 121.58
Precision Cutting Tools 224 SERIES 2 FLUTE FOR ALUMINUM & NON FERROUS MATERIALS
Item #: CW8057276
Brand: Precision Cutting Tools
Model #: 9584953
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Peripheral Effective Cutting Edge Count (ZEFP) | 2 |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Tool Type | Solid Carbide Endmill |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Maximum Feed per Tooth (fz(max)) | 0.007 ″/tooth |
| Overall Length (OAL) | 3″ |
| Minimum Feed per Tooth (fz(min)) | 0.004 ″/tooth |
| Flute Count (NOF) | 2 |
| Length Group | Stub |
| Flute Helix Angle (FHA) | 45 Degrees |
| Shank Standard | h6 |
| Shank Type | Round |
| Body Material | Carbide |
| End Shape | Corner Radius |
| Decimal Equivalent | 0.625″ |
| Usable Length (LU) | 3/4″ |
| Measurement Type | Inch |
| Application | | Finish | HEM | Semi Finish | |
| Series/List # | 224 |
| Corner Radius (RE) | 0.09″ |
| Shank Size (SS) | 5/8″ |
$ 158.03
7/16″ × 7/16″ × 2″ × 4″ RHS / RHC Solid Carbide 3-Flute Square End High-Performance End Mill for Aluminum - Bright
Item #: CE60C60633
Brand: Cleveland
Model #: C60633
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7/16″ |
| Applicable Material | Aluminum / Non-Ferrous Materials |
| Connection Diameter Machine Side (DCONMS) | 7/16″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 2″ |
| Length Group | Long |
| Overall Length (OAL) | 4″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.4375″ |
| Coating | Bright |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Series/List # | CEM-AM3 |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Square |
| Single / Double End | Single End |
$ 124.17
3/4 End Mill 4FL .030R WF - SER 01C 3/4x3/4x1-1/2x4
Item #: DD9038091
Brand: KYOCERA SGS Precision Tools
Model #: 38091
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Shank Type | Flatted |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Usable Length (LU) | 2-1/2″ |
| Overall Length (OAL) | 4″ |
| Corner Radius (RE) | 0.03″ |
| Cutting Edge Material | Carbide |
| Flute Type | Spiral |
| Coating | Uncoated |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.75″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | 01C |
$ 331.63
77080 13815750 CERAEDGE
Item #: DD1577080
Brand: M A Ford
Model #: 13815750CE
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 4 mm |
| Coating | CERAedge® |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Flute Count (NOF) | 3 |
| Depth of Cut Maximum (APMX) | 11 mm |
| Flute Helix Angle (FHA) | 36 Degrees |
| Overall Length (OAL) | 55 mm |
| Shank Type | Straight |
| Cutting Edge Material | Carbide |
| End Shape | Square |
$ 58.05
5/16″ × 5/16″ × 1-1/4″ × 3″ RHS / RHC Solid Carbide 4-Flute Corner Radius End Mill - Bright
Item #: CE60C60026
Brand: Cleveland
Model #: C60026
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Corner Radius (RE) | 0.02″ |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Length Group | Long |
| Overall Length (OAL) | 3″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.3125″ |
| Coating | Bright |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Series/List # | CEM-V-4R |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Corner Radius |
| Single / Double End | Single End |
$ 80.29
0.025″ Dia. × 1/8″ Shank × 0.037″ DOC × 2-1/2″ OAL, Carbide AlTiN, Stub , 4 Flute, Ballnose End Mill
Item #: GE9064225C3
Brand: Harvey Tool
Model #: 64225-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.025″ |
| Usable Length (LU) | 1/8″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Applicable Material | Steel |
| Depth of Cut Maximum (APMX) | 0.037″ |
| Length Group | 5D |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball Nose |
| Cutting Edge Material | Carbide |
| Flute Type | Stub |
| Coating | AlTiN |
| Decimal Equivalent | 0.025″ |
| Flute Count (NOF) | 4 |
| Measurement Type | Inch |
$ 68.83