Machining Fluids & Applicators For Sale | Exact Tooling - (1471 Products)
PH922A PLASTIC PARTS WASHER
Item #: LC55PH922A
Manufacturer: Graymills
Mfg #: PH922A
Technical Specifications:
•Brand Name: Graymills
•Capacity: 30 Gallons
•Class: Pumps / Accessories
•Depth: 15
•Heater Power: 1400W
•Length: 35
•Motor: 120VAC (15A)
•Pump Size: 300 GPH
•Style: Thermoplastic
•Type: Parts Washers
•Width: 21-1/2
Description:
•Ability to convert from soak to sink and back again
•Thermostatically controlled 1,400 watt heater delivers heated solution up to 110°F (44°C)
•Rugged thermosplastic corrosion-resistant construction (5 year warranty)
•Flow-thru brush, flexible stay-put nozzle - brush or flush away soil with 300 GPH pump
•Low liquid level shuts off heater in event liquid level drops below a set point
•GFI shuts down entire unit in event of electrical short
•9" Soak depth tank, molded bottom ridges allow soaking parts with detergent circulation while parts sit above sludge
•Removable stainless steel work shelf for way postiioning of parts while hand cleaning
•CETL certified
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 125.0000
Parts Cleaning Fluid Super Biotene for Biomatic System - Pre-Mixed
Item #: LC56GM6605
Manufacturer: Graymills
Mfg #: GM660-5
Technical Specifications:
•Brand Name: Graymills
•Capacity: 5 Gallons
•Class: Pumps / Accessories
•Description: 5 gal Biotene (pre-mixed)
•Hazard Code: HAZ58
•Type: Parts Washers
Description:
•Parts Cleaning Fluid Super Biotene
•Ph neutral solution contains no VOC's
•Leaves no residue, fast drying
•Available in premixed, ready to use formula or economical concentrate to be mixed 1:19 using regular tap water
•AQMD Certified for use in California
•For use with Biomatic Cleaning Systems
Shipping Info:
•HAZ 58
•UPS Ground - No Additional Shipping Charges
•UPS Air-No Additional Shipping Charges
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 44.2000
•Dimensions - Height: 14.2 Length: 12.5 Width: 12.5
•Addl Fee Under 70lb - $14.25 per item
Super Agitene 141 Parts Cleaning Solvent (non-hazardous) 5 Gallon - HAZ05
Item #: LC56M5005141
Manufacturer: Graymills
Mfg #: M5005141
Technical Specifications:
•Brand Name: Graymills
•Capacity: 5 Gallon
•Class: Pumps / Accessories
•Hazard Code: HAZ05
•Size: 5 Gallon
•Type: Super Agitene 141 Non-Hazardous Solvent
•Weight: 35 lbs
Description:
•Parts Cleaning Solvent
•Rapidly dissolves grease, oil & residue
•Hand-Ease® contains cosmetic gradel anolin, reducing irritation and chapping.
•Super Agitene with 105°F flash pointor Super Agitene 141 with flash pointof 141°F
•Requires no water rinse.
Shipping Info:
•HAZ 05
•UPS Ground - No Additional Shipping Charges
•UPS Air - Cannot Ship Air
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 32.7000
•Dimensions - Height: 13.7 Length: 12.0 Width: 12.0
National Heavy Duty Parts Washer
Item #: NW551991020
Manufacturer: Quality Import
Mfg #:
Technical Specifications:
•Brand Name: Quality Import
•Capacity: 20 Gallons (Heavy Duty Style)
•Class: Pumps / Accessories
•Type: Parts Washers
Description:
•Parts Washers
•Designed for use in shops ranging from mechanic s garage to heavy industry
•Features a 115V fully enclosed pump, seamless construcion
•20 Gallon model has 165° F fuseable link on hood
Shipping Info:
•Actual Weight - 55.0000
•Shipping Weight - 68.0000
•Dimensions - Height: 13.0 Length: 22.0 Width: 33.0
DDK DETERGENT DISPOSAL KIT
Item #: LC56DDK
Manufacturer: Graymills
Mfg #: DDK
Technical Specifications:
Description:
Shipping Info:
•Actual Weight - 15.0000
* X35IMV25F 35GAL LOW PROFILE
Item #: LC55X35IMV25F
Manufacturer: Graymills
Mfg #: X35IMV25F
Technical Specifications:
Description:
Shipping Info:
•Actual Weight - 105.0000
•Addl Fee Over 70lb - $23.00 per item
HAZ06 M1700 50GAL REGULAR AGAITENE
Item #: LC56M1700
Manufacturer: Graymills
Mfg #: M1700
Technical Specifications:
Description:
Shipping Info:
•HAZ 06
•UPS Ground - Commercial TruckOnly, Call for Charges
•UPS Air - Commercial Truck Only, Call for Charges
•Commercial Truck - CommercialTruck Only, Call for Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 365.0000
DN104 DETERG-NEUTRAL POWDER-4PK
Item #: LC56DN104
Manufacturer: Graymills
Mfg #: DN104
Technical Specifications:
Description:
Shipping Info:
•Actual Weight - 33.0000
Square End Mill; 1/64″ Dia. × 0.022″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 Flutes, Carbide, Uncoated
Item #: TA15TC54322
Brand: Titan USA
Model #: TC54322
Product Specifications | |
---|---|
Cutting Diameter (DC) | 1/64″ |
Flute Helix Angle (FHA) | 30 Degrees |
Connection Diameter Machine Side (DCONMS) | 1/8″ |
End Shape | Square |
Depth of Cut Maximum (APMX) | 0.022″ |
Usable Length (LU) | 0.022″ |
Overall Length (OAL) | 2-1/2″ |
Decimal Equivalent | 0.0156″ |
Cutting Edge Material | Carbide |
Measurement Type | Inch |
Coating | Uncoated |
Center Cutting | Yes |
Flute Count (NOF) | 3 |
HAZ06 GM390C555 55GAL AQUATENE
Item #: LC56GM390C55
Manufacturer: Graymills
Mfg #: GM390C55
Technical Specifications:
Description:
Shipping Info:
•HAZ 06
•UPS Ground - Commercial TruckOnly, Call for Charges
•UPS Air - Commercial Truck Only, Call for Charges
•Commercial Truck - CommercialTruck Only, Call for Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 530.0000
TC2420L 24" DIP TANK W/LIFTER
Item #: LC55TC2420L
Manufacturer: Graymills
Mfg #: TRC2420L
Technical Specifications:
Description:
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 225.0000
HAZ06 GM571 100LB POWDER F/ALUM
Item #: LC56GM571100
Manufacturer: Graymills
Mfg #: GM571100
Technical Specifications:
Description:
Shipping Info:
•HAZ 06
•UPS Ground - Commercial TruckOnly, Call for Charges
•UPS Air - Commercial Truck Only, Call for Charges
•Commercial Truck - CommercialTruck Only, Call for Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 100.0000
HAZ06 M8400141 50GAL 141 SUPER
Item #: LC56M8400141
Manufacturer: Graymills
Mfg #: M8400141
Technical Specifications:
Description:
Shipping Info:
•HAZ 06
•UPS Ground - Commercial TruckOnly, Call for Charges
•UPS Air - Commercial Truck Only, Call for Charges
•Commercial Truck - CommercialTruck Only, Call for Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 365.0000
30 PACK CARTRIDGE FILTER
Item #: LC5574209335
Manufacturer: Graymills
Mfg #: 742-09335
Technical Specifications:
Description:
Shipping Info:
•Actual Weight - 1.0000
HAZ05 M2062 5GAL REGULAR AGITENE
Item #: LC56M2062
Manufacturer: Graymills
Mfg #: M2062
Technical Specifications:
Description:
Shipping Info:
•HAZ 05
•UPS Ground - No Additional Shipping Charges
•UPS Air - Cannot Ship Air
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 32.0000
•Dimensions - Height: 12.0 Length: 13.5 Width: 12.0
•Addl Fee Under 70lb - $14.25 per item
Straight Flute Tap; 3/8″ -16 × 2-15/16″ OAL, 4 Flute, HSS, TiN, H3
Item #: TA15TT75471
Brand: Titan USA
Model #: TT75471
Product Specifications | |
---|---|
Thread Diameter Size (TDZ) | 3/8″ |
Cutting Edge Material | HSS |
Threads per Inch (TPI) | 16 |
Thread Tolerance Class (TCTR) | | H3 | |
Thread Standard | | UN | |
Special Feature | General Purpose |
Overall Length (OAL) | 2-15/16″ |
Standard | | ANSI | |
Thread Cutting Part Length (THL) | 1-1/4″ |
Chamfer | Bottom |
Usable Length (LU) | 1-1/4″ |
Coating | TiN |
Connection Diameter Machine Side (DCONMS) | 0.381″ |
Measurement Type | Inch |
Flute Count (NOF) | 4 |
Thread Size | 3/8″ - 16 |
Flute Helix Angle (FHA) | 0 Degrees |
TC3626 36" DIP TANK W/WORKREST
Item #: LC55TC3626
Manufacturer: Graymills
Mfg #: TC3626
Technical Specifications:
Description:
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 257.0000
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.2932M
Item #: 53491718
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.2932MProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00001/-0.00001
Blank Number Wire Size
#1
Inner Diameter (Decimal Inch)
0.2932
Calibrated
No
Traceability Certification Included
No
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
Straight Flute Tap; #4 -48 × 1-7/8″ OAL, 3 Flute, HSS, Steam Oxide, H2
Item #: TA15TT90086S
Brand: Titan USA
Model #: TT90086S
Product Specifications | |
---|---|
Thread Diameter Size (TDZ) | #4 |
Cutting Edge Material | HSS |
Threads per Inch (TPI) | 48 |
Thread Tolerance Class (TCTR) | | H2 | |
Thread Standard | | UN | |
Special Feature | General Purpose |
Overall Length (OAL) | 1-7/8″ |
Standard | | ANSI | |
Thread Cutting Part Length (THL) | 9/16″ |
Chamfer | Bottom |
Usable Length (LU) | 9/16″ |
Coating | | Black Oxide | |
Connection Diameter Machine Side (DCONMS) | 0.141″ |
Measurement Type | Inch |
Flute Count (NOF) | 3 |
Thread Size | #4 - 48 |
Flute Helix Angle (FHA) | 0 Degrees |
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.2336M
Item #: 97889869
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.2336MProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00001/-0.00001
Blank Number Wire Size
#1
Inner Diameter (Decimal Inch)
0.2336
Calibrated
No
Traceability Certification Included
No
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master