Email: sales@exacttooling.com
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

Motion Control & Fluid Power > Bearings (ET04) - (9865 Products)

Motion Control & Fluid Power > Bearings (ET04)
Tritan - 1" ID, 3.74" OAL x 1.81" OAH 4-Bolt Flange - 1,765 Lb Static Cap, 3,147 Lb Dyn Cap, 2.76" Btw Mnt Hole Ctrs, 3/4" Base-to-Ctr Ht, Cast Iron/Steel - Exact Tooling

Tritan - 1" ID, 3.74" OAL x 1.81" OAH 4-Bolt Flange - 1,765 Lb Static Cap, 3,147 Lb Dyn Cap, 2.76" Btw Mnt Hole Ctrs, 3/4" Base-to-Ctr Ht, Cast Iron/Steel


Item #: 92645373
Brand: Tritan
Model #: HCFU205-16
Exact Tooling IR#: 04

Product Specifications
Type 4-Bolt Flange
Inside Diameter (Decimal Inch) 1.0000
Inside Diameter (Inch) 1
Width (Decimal Inch) 3.7400
Overall Length (Decimal Inch) 3.7400
Overall Height (Decimal Inch) 1.8100
Static Load Capacity (Pounds) 1764.75
Dynamic Load Capacity (Pounds) 3147
Distance Between Mounting Hole Centers (Decimal Inch) 2.7600
Material Cast Iron/Steel
Distance Between Base And Center (Decimal Inch) 0.7500
Insert Material 52100 Steel
Lock Type Eccentric
Bolt Size (Inch) 3/8
Metric Bolt Size 10.0000

$ 33.56
Browning - 1-1/2" ID, 7-1/8" OAL x 4" OAH Pillow Block - 4,467 Lb Static Cap, 7,340 Lb Dyn Cap, 5-3/8" Btw Mnt Hole Ctrs, 2" Base-to-Ctr Ht, Cast Iron - Exact Tooling

Browning - 1-1/2" ID, 7-1/8" OAL x 4" OAH Pillow Block - 4,467 Lb Static Cap, 7,340 Lb Dyn Cap, 5-3/8" Btw Mnt Hole Ctrs, 2" Base-to-Ctr Ht, Cast Iron


Item #: 51466852
Brand: Browning
Model #: VPS-124
Exact Tooling IR#: 04

Product Specifications
Type Pillow Block
Inside Diameter (Inch) 1-1/2
Width (Inch) 1-15/16
Overall Length (Inch) 7-1/8
Overall Height (Inch) 4
Static Load Capacity (Pounds) 4467.00
Dynamic Load Capacity (Pounds) 7340
Distance Between Mounting Hole Centers (Decimal Inch) 5.3750
Distance Between Mounting Hole Centers (Inch) 5-3/8
Material Cast Iron
Distance Between Base And Center (Decimal Inch) 2.0000
Distance Between Base And Center (Inch) 2
Insert Material 52100 Steel
Lock Type Set Screw
Bolt Size (Inch) 1/2

$ 142.70
Value Collection - 3/32" Bore Diam, 5/16" OD, Double Shield Miniature Radial Ball Bearing - 9/64" Wide, With Flange, 1 Row, Round Bore, 40 Lb Static Capacity, 124 Lb Dynamic Capacity - Exact Tooling

Value Collection - 3/32" Bore Diam, 5/16" OD, Double Shield Miniature Radial Ball Bearing - 9/64" Wide, With Flange, 1 Row, Round Bore, 40 Lb Static Capacity, 124 Lb Dynamic Capacity


Item #: 35380989
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Minature radial ball bearings are ideal for spall apces and low friction applications. They are used in areas where there is low opperating torque and with bore and outside diamater tolerance ranges of +0.0000" to -0.0002".
Double shield refers to two shields, one on each side of the bearing. The shield is located on the outer race does not make contact with the inner race. Ideal for very high speeds, but does not prevent smaller contaminants from entering the bearing. They are more economical than seals.
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Miniature
Style Double Shield
Bore Diameter (Decimal Inch) 0.0937
Outside Diameter (Decimal Inch) 0.3125
Width (Decimal Inch) 0.1406
Flange Type With Flange
Number of Rows 1
Bore Type Round
Housing Material Stainless Steel
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 40
Dynamic Load Capacity (Lb.) 124
ABEC Scale ABEC-5
Flange OD (Decimal Inch) 0.3590
Bearing Number SFR1-5ZZ

$ 15.35
Solid Counterbores; Cutter Diameter (Decimal Inch): 0.2030; Flute Length (Decimal Inch): 0.6250; Finish/Coating: Uncoated; Shank Diameter (Inch - 0 Decimals): 0.2500; Number Of Flutes: 4; Cutter Material: Solid Carbide; Length (Inch): 2.5000 in

Solid Counterbores; Cutter Diameter (Decimal Inch): 0.2030; Flute Length (Decimal Inch): 0.6250; Finish/Coating: Uncoated; Shank Diameter (Inch - 0 Decimals): 0.2500; Number Of Flutes: 4; Cutter Material: Solid Carbide; Length (Inch): 2.5000 in


Item #: 82862079
Brand: Internal Tool
Model #: 85-2031

Product Specifications

Cutter Diameter (Decimal Inch) 0.2030
Flute Length (Decimal Inch) 0.6250
Finish/Coating Uncoated
Shank Diameter (Inch - 0 Decimals) 0.2500
Number Of Flutes 4
Cutter Material Solid Carbide
Length (Inch) 2.5000 in
UNSPSC Code 23241603
Country of Origin UNITED STATES

$ 29.71
Pacific Bearing - 1/4" Inside x 3/8" Outside Diam, Aluminum Anti-Friction Sleeve Bearing - 1/2" Outside Diam, 1/2" OAL - Exact Tooling

Pacific Bearing - 1/4" Inside x 3/8" Outside Diam, Aluminum Anti-Friction Sleeve Bearing - 1/2" Outside Diam, 1/2" OAL


Item #: 35417948
Brand: Pacific Bearing
Model #: PSF-0406-4
Exact Tooling IR#: 04

Product Specifications
Type Anti-Friction Sleeve Bearings
Inside Diameter (Inch) 1/4
Outside Diameter (Inch) 3/8
Overall Length (Inch) 1/2
Material Aluminum
Flange Outside Diameter (Decimal Inch) 0.5000
Maximum Static Load Capacity (Pounds) 181.0

$ 33.30
Value Collection - 6-11/32" OAL2-Bolt Flange - Steel - Exact Tooling

Value Collection - 6-11/32" OAL2-Bolt Flange - Steel


Item #: 35378215
Brand: Value Collection
Exact Tooling IR#: 04

Product Specifications
Type 2-Bolt Flange
Width (Inch) 1-3/4
Overall Length (Inch) 6-11/32
Material Steel

$ 48.55
Tritan - 85mm Bore Diam, 130mm OD, Double Seal Deep Groove Radial Ball Bearing - 22mm Wide, 1 Row, Round Bore, 9,700 Lb Static Capacity, 11,100 Lb Dynamic Capacity - Exact Tooling

Tritan - 85mm Bore Diam, 130mm OD, Double Seal Deep Groove Radial Ball Bearing - 22mm Wide, 1 Row, Round Bore, 9,700 Lb Static Capacity, 11,100 Lb Dynamic Capacity


Item #: 35434109
Brand: Tritan
Model #: 6017 2RSC3 PRX
Exact Tooling IR#: 04

Features and Benefits

Deep groove ball bearings are used for high and very high speeds in operations, requiring little maintenance. They are designed with balls rolling between an inner and outer raceway. They are commonly used in pumps, gear motors and electric motors.
Double Seal Bearings are factory lubricated with oil or grease and designed to retain lubricants while keeping contaminates out. The seal is on each side of the bearing and is located on the outer race making some contact with the inner race.
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Deep Groove
Style Double Seal
Bore Diameter (mm) 85.00
Outside Diameter (mm) 130.00
Width (mm) 22.00
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 9700
Static Load Capacity (Nm) 43148
Dynamic Load Capacity (Lb.) 11100
Dynamic Load Capacity (Nm) 49375
Bearing Number 6017

$ 100.17
Turning Insert: CCMT21.51FW4 WPP20G, Carbide

Turning Insert: CCMT21.51FW4 WPP20G, Carbide


Item #: 91647826
Brand: Walter
Model #: 8293226

Product Specifications

ANSI Insert Code CCMT2(1.5)1
ISO Insert Code CCMT060204
Relief Angle 7.000
Insert Style CCMT
Corner Radius (mm) 0.40
Included Angle 80.00
Manufacturer Grade WPP20G
Coating/Finish TiCN+Al2O3+(TiN)
Wiper Edge Yes
Insert Hand Neutral
Insert Thickness 2.38
Series CCMT
Inscribed Circle (mm) 6.35
Insert Material Carbide
Insert Shape Rhombic 80°
Chip Breaker Operation Wiper - Finishing
Grade Characteristics Cast Iron (K) - Moderate Wear-Resistance and Toughness; Steel (P) - Moderate Wear-Resistance and Toughness
Side Clearance Positive
Number Of Cutting Edges 2
Insert Shape Code C
Hole Diameter (Mm) ( - 0 Decimals) 2.8000
Maximum Depth of Cut (mm) 2.00
Insert Holding Method Screw
Clearance Code C
Tolerance Code M
Insert Length (mm) 6.45
Manufacturers Catalog Number CCMT060204-FW4 WPP20G
Chip Breaker FW4
Width (mm - 2 Decimals) 6.35
ANSI Size Code 2(1.5)1
ISO Size Code 060204
UNSPSC Code 23242105
Insert Size Code 06
Country of Origin Germany

$ 15.15
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.4737M

Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.4737M


Item #: 02525830
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-2.4737M

Product Specifications

Material Solid Carbide
Tolerance (Decimal Inch) +0.00002/-0.00002
Blank Number Wire Size #7
Inner Diameter (Decimal Inch) 2.4737
Calibrated No
Traceability Certification Included No
Standards B47.1 Gage Standards; ASME B89.1.6
Go/No Go Master

$ 1,540.97
Tritan - 40mm Bore Diam, 90mm OD, Double Shield Deep Groove Radial Ball Bearing - 23mm Wide, 1 Row, Round Bore, 5,400 Lb Static Capacity, 9,100 Lb Dynamic Capacity - Exact Tooling

Tritan - 40mm Bore Diam, 90mm OD, Double Shield Deep Groove Radial Ball Bearing - 23mm Wide, 1 Row, Round Bore, 5,400 Lb Static Capacity, 9,100 Lb Dynamic Capacity


Item #: 35434646
Brand: Tritan
Model #: 6308 ZZC3 PRX
Exact Tooling IR#: 04

Features and Benefits

Deep groove ball bearings are used for high and very high speeds in operations, requiring little maintenance. They are designed with balls rolling between an inner and outer raceway. They are commonly used in pumps, gear motors and electric motors.
Double shield refers to two shields, one on each side of the bearing. The shield is located on the outer race does not make contact with the inner race. Ideal for very high speeds, but does not prevent smaller contaminants from entering the bearing. They are more economical than seals.
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Deep Groove
Style Double Shield
Bore Diameter (mm) 40.00
Outside Diameter (mm) 90.00
Width (mm) 23.00
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 5400
Static Load Capacity (Nm) 24020
Dynamic Load Capacity (Lb.) 9100
Dynamic Load Capacity (Nm) 40479
Bearing Number 6308

$ 28.95
USDI - 1 Row, 2.321" OD, 11/16" Hex Open Conveyor Roller Bearing - 600 Lb Capacity, 550 Max RPM, Steel with Zinc Housing - Exact Tooling

USDI - 1 Row, 2.321" OD, 11/16" Hex Open Conveyor Roller Bearing - 600 Lb Capacity, 550 Max RPM, Steel with Zinc Housing


Item #: 36559268
Brand: USDI
Model #: CB-4111H14
Exact Tooling IR#: 04

Features and Benefits

Conveyor roller bearings are designed to accommodate loads where high levels of exposure to contamination are present. They are economical and are used in conveyor systems.
Open bearings are designed with an extended inner ring or flange that can improve shaft support and eliminate the need for location spacers
Radial ball bearings without a flange have a cylindrical outer diameter for mounting in straight bored housings.
Hex bore bearings are designed for engagement with a hexagon shaft.
Product Specifications
Type Conveyor Roller Bearing
Style Open
Hex Size (Inch) 11/16
Outside Diameter (Decimal Inch) 2.3210
Flange Type Without Flange
Number of Rows 1
Bore Type Hex
Housing Material Zinc
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 600
Dynamic Load Capacity (Lb.) 600
Ball Material Steel
Maximum RPM 550

$ 17.45
SKF - 35mm Bore Diam, 80mm OD, Open Angular Contact Radial Ball Bearing - 21mm Wide, 1 Row, Round Bore, 24,500 Lb Static Capacity, 39,000 Lb Dynamic Capacity - Exact Tooling

SKF - 35mm Bore Diam, 80mm OD, Open Angular Contact Radial Ball Bearing - 21mm Wide, 1 Row, Round Bore, 24,500 Lb Static Capacity, 39,000 Lb Dynamic Capacity


Item #: 45670411
Brand: SKF
Model #: 7307 BEGBP
Exact Tooling IR#: 04

Features and Benefits

Open Bearing design without seals or shields and are intended to be lubricated in place and periodically maintained
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Angular Contact
Style Open
Bore Diameter (mm) 35.00
Outside Diameter (mm) 80.00
Outside Diameter (Decimal Inch) 3.1500
Width (Decimal Inch) 0.8300
Width (mm) 21.00
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Contact Angle 40
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 24500
Dynamic Load Capacity (Lb.) 39000
Cage Material Plastic
Maximum RPM 9500

$ 204.35
SKF - 40mm Bore Diam, 80mm OD, Open Self Aligning Radial Ball Bearing - 23mm Wide, 2 Rows, Round Bore, 2,250 Lb Static Capacity, 7,170 Lb Dynamic Capacity - Exact Tooling

SKF - 40mm Bore Diam, 80mm OD, Open Self Aligning Radial Ball Bearing - 23mm Wide, 2 Rows, Round Bore, 2,250 Lb Static Capacity, 7,170 Lb Dynamic Capacity


Item #: 81354649
Brand: SKF
Model #: 2208 ETN9
Exact Tooling IR#: 04

Features and Benefits

Open Bearing design without seals or shields and are intended to be lubricated in place and periodically maintained
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Self Aligning
Style Open
Bore Diameter (mm) 40.00
Outside Diameter (mm) 80.00
Width (mm) 23.00
Flange Type Without Flange
Number of Rows 2
Bore Type Round
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 2250
Dynamic Load Capacity (Lb.) 7170
Cage Material Glass fiber reinforced polyamide

$ 172.42
IKO - 0.787" Bore Diam, Needle Roller Bearing Inner Ring - Precision Needle, 0.984" Outside Diam, 0.669" Wide - Exact Tooling

IKO - 0.787" Bore Diam, Needle Roller Bearing Inner Ring - Precision Needle, 0.984" Outside Diam, 0.669" Wide


Item #: 09019365
Brand: IKO
Model #: LRT202517
Exact Tooling IR#: 04

Product Specifications
Type Needle Roller Bearing - Inner Ring
Bore Diameter (Decimal Inch) 0.7870
Bore Diameter (mm) 20.000
Outside Diameter (Decimal Inch) 0.9840
Outside Diameter (mm) 25.0000
Width (Decimal Inch) 0.6690
Width (mm) 17.00
Dynamic Load Capacity (Pounds) 0
Style. Precision Needle

$ 12.09
Nice - 3/4" Bore Diam, 1-3/4" OD, Double Seal Precision Ground Radial Ball Bearing - 5/8" Wide, 1 Row, Round Bore, 1,025 Lb Static Capacity, 2,595 Lb Dynamic Capacity - Exact Tooling

Nice - 3/4" Bore Diam, 1-3/4" OD, Double Seal Precision Ground Radial Ball Bearing - 5/8" Wide, 1 Row, Round Bore, 1,025 Lb Static Capacity, 2,595 Lb Dynamic Capacity


Item #: 59145425
Brand: Nice
Model #: 7512DLGTNTG18
Exact Tooling IR#: 04

Features and Benefits

Double Seal Bearings are factory lubricated with oil or grease and designed to retain lubricants while keeping contaminates out. The seal is on each side of the bearing and is located on the outer race making some contact with the inner race.
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Precision Ground
Style Double Seal
Bore Diameter (Inch) 3/4
Bore Diameter (Decimal Inch) 0.7500
Outside Diameter (Inch) 1-3/4
Outside Diameter (Decimal Inch) 1.7500
Width (Inch) 5/8
Width (Decimal Inch) 0.6250
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Snap Ring Included With Snap Ring
Static Load Capacity (Lb.) 1025
Dynamic Load Capacity (Lb.) 2595

$ 46.94
Value Collection - 188mm OAL2-Bolt Flange Bearing - 7200 Lb Dyn Cap, Cast Iron - Exact Tooling

Value Collection - 188mm OAL2-Bolt Flange Bearing - 7200 Lb Dyn Cap, Cast Iron


Item #: 35431741
Brand: Value Collection
Exact Tooling IR#: 04

Product Specifications
Type 2-Bolt Flange Bearing
Width (mm) 56.00
Overall Length (mm) 188.0000
Material Cast Iron
Bolt Size (Decimal Inch) 15.0800

$ 46.78
Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4694; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1

Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4694; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1


Item #: 78138336
Brand: GSG
Model #: GSG-CR-0.4694C

Product Specifications

Material Solid Carbide
Tolerance (Decimal Inch) 0.00000/-0.00002
Blank Number Wire Size #2
Inner Diameter (Decimal Inch) 0.4694
Calibrated Yes
Traceability Certification Included NIST
Go/No Go Go
Standards B47.1 Gage Standards; ASME B89.1.6
UNSPSC Code 41111619
Country of Origin UNITED STATES

$ 673.11
Browning - 2-7/16" ID, 10-3/4" OAL x 6-3/16" OAH Pillow Block - 10,063 Lb Static Cap, 13,971 Lb Dyn Cap, 8-1/4" Btw Mnt Hole Ctrs, 3" Base-to-Ctr Ht, Cast Iron - Exact Tooling

Browning - 2-7/16" ID, 10-3/4" OAL x 6-3/16" OAH Pillow Block - 10,063 Lb Static Cap, 13,971 Lb Dyn Cap, 8-1/4" Btw Mnt Hole Ctrs, 3" Base-to-Ctr Ht, Cast Iron


Item #: 04716494
Brand: Browning
Model #: 765023
Exact Tooling IR#: 04

Product Specifications
Type Pillow Block
Inside Diameter (Inch) 2-7/16
Width (Inch) 2-11/16
Overall Length (Inch) 10-3/4
Overall Height (Inch) 6-3/16
Static Load Capacity (Pounds) 10063.00
Dynamic Load Capacity (Pounds) 13971
Distance Between Mounting Hole Centers (Decimal Inch) 8.2500
Distance Between Mounting Hole Centers (Inch) 8-1/4
Material Cast Iron
Distance Between Base And Center (Decimal Inch) 3.0000
Distance Between Base And Center (Inch) 3
Insert Material 52100 Steel
Lock Type Set Screw
Bolt Size (Inch) 3/4

$ 312.57
Koyo - Needle Roller Bearings Type: Needle Roller Bearing Bore Diameter: 0.5000 (Decimal Inch) - Exact Tooling

Koyo - Needle Roller Bearings Type: Needle Roller Bearing Bore Diameter: 0.5000 (Decimal Inch)


Item #: 31370109
Brand: Koyo
Model #: BH812 OH
Exact Tooling IR#: 04

Product Specifications

Needle Roller Bearings; Type: Needle Roller Bearing ; Bore Diameter: 0.5000 (Decimal Inch); Outside Diameter (Decimal Inch): 0.7500 ; Width (Decimal Inch): 0.7500 ; Dynamic Load Capacity: 3,910 (Pounds)
Type Needle Roller Bearing
Bore Diameter (Decimal Inch) 0.5000
Outside Diameter (Decimal Inch) 0.7500
Width (Decimal Inch) 0.7500
Dynamic Load Capacity (Pounds) 3910

$ 10.49
Igus - 1/2" Inside x 19/32" Outside Diam, Thermoplastic Sleeve Bearing - 7/8" Outside Diam, 0.046" Flange Thickness, 1/2" OAL - Exact Tooling

Igus - 1/2" Inside x 19/32" Outside Diam, Thermoplastic Sleeve Bearing - 7/8" Outside Diam, 0.046" Flange Thickness, 1/2" OAL


Item #: 02561066
Brand: Igus
Model #: TFI-0809-08
Exact Tooling IR#: 04

Product Specifications
Inside Diameter (Inch) 1/2
Outside Diameter (Inch) 19/32
Overall Length (Inch) 1/2
Material Thermoplastic
Flange Thickness (Decimal Inch) 0.0460
Flange Outside Diameter (Decimal Inch) 0.8750

$ 25.56