Email: sales@exacttooling.com
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

Motion Control & Fluid Power > Bearings (ET04) - (9865 Products)

Motion Control & Fluid Power > Bearings (ET04)
SKF - 12mm Bore Diam, 21mm OD, Double Shield Thin Section Radial Ball Bearing - 5mm Wide, 1 Row, Round Bore, 151 Lb Static Capacity, 321 Lb Dynamic Capacity - Exact Tooling

SKF - 12mm Bore Diam, 21mm OD, Double Shield Thin Section Radial Ball Bearing - 5mm Wide, 1 Row, Round Bore, 151 Lb Static Capacity, 321 Lb Dynamic Capacity


Item #: 78053105
Brand: SKF
Model #: 61801-2Z
Exact Tooling IR#: 04

Features and Benefits

Thin section radial ball bearings are designed thinner than standard ball brearings. They are very light and used at higher speeds.
Double shield refers to two shields, one on each side of the bearing. The shield is located on the outer race does not make contact with the inner race. Ideal for very high speeds, but does not prevent smaller contaminants from entering the bearing. They are more economical than seals.
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Thin Section
Style Double Shield
Bore Diameter (mm) 12.00
Outside Diameter (mm) 21.00
Width (mm) 5.00
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 151
Dynamic Load Capacity (Lb.) 321

$ 129.96
Nice - 3/8" Bore Diam, 1-1/8" OD, Double Shield Precision Ground Radial Ball Bearing - 3/8" Wide, 1 Row, Round Bore, 475 Lb Static Capacity, 1,200 Lb Dynamic Capacity - Exact Tooling

Nice - 3/8" Bore Diam, 1-1/8" OD, Double Shield Precision Ground Radial Ball Bearing - 3/8" Wide, 1 Row, Round Bore, 475 Lb Static Capacity, 1,200 Lb Dynamic Capacity


Item #: 59144972
Brand: Nice
Model #: 1614DSTNTG18
Exact Tooling IR#: 04

Features and Benefits

Double shield refers to two shields, one on each side of the bearing. The shield is located on the outer race does not make contact with the inner race. Ideal for very high speeds, but does not prevent smaller contaminants from entering the bearing. They are more economical than seals.
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Precision Ground
Style Double Shield
Bore Diameter (Inch) 3/8
Bore Diameter (Decimal Inch) 0.3750
Outside Diameter (Inch) 1-1/8
Outside Diameter (Decimal Inch) 1.1250
Width (Inch) 3/8
Width (Decimal Inch) 0.3750
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Static Load Capacity (Lb.) 475
Dynamic Load Capacity (Lb.) 1200

$ 19.47
Woodruff Keyseat Cutter: 1" Cut Dia, 1/16" Cut Width, 1/2" Shank Dia, Straight Tooth

Woodruff Keyseat Cutter: 1" Cut Dia, 1/16" Cut Width, 1/2" Shank Dia, Straight Tooth


Item #: 86833936
Brand: Internal Tool
Model #: 102-1230-C

Product Specifications

Connection Type Shank
Cutter Material Solid Carbide
Cutter Diameter (Inch) 1
Cutter Diameter (Decimal Inch) 1.0000
Tooth Configuration Straight
Cutting Width (Inch) 1/16
Cutting Width (Decimal Inch) 0.0625
Weldon Flat No
Neck Diameter (Decimal Inch) 0.2800
Neck Length (Decimal Inch) 0.2500
Shank Diameter (Inch) 1/2
Shank Diameter (Decimal Inch) 0.5000
Overall Length (Inch) 2-3/4
Overall Length (Decimal Inch) 2.7500
Primary Workpiece Material Non-Ferrous Metal; Stainless Steel; Cast Iron; Superalloys & Titanium; Steel
Primary Workpiece Material Code P; S; K; M; N
Cutter Material Grade Micrograin
Series 102
Coating/Finish AlTiN
Number Of Teeth 12
Corner Radius (Decimal Inch) 0.0150
UNSPSC Code 23241631
Country of Origin UNITED STATES

$ 178.87
Igus - 1" Inside x 1-1/8" Outside Diam, Thermoplastic Sleeve Bearing - 1-3/8" Outside Diam, 1/16" Flange Thickness, 1-1/2" OAL - Exact Tooling

Igus - 1" Inside x 1-1/8" Outside Diam, Thermoplastic Sleeve Bearing - 1-3/8" Outside Diam, 1/16" Flange Thickness, 1-1/2" OAL


Item #: 02561157
Brand: Igus
Model #: TFI-1618-24
Exact Tooling IR#: 04

Product Specifications
Inside Diameter (Inch) 1
Outside Diameter (Inch) 1-1/8
Overall Length (Inch) 1-1/2
Material Thermoplastic
Flange Thickness (Decimal Inch) 0.0620
Flange Outside Diameter (Decimal Inch) 1.3750

$ 92.82
SKF - 60mm Bore Diam, 95mm OD, Open Deep Groove Radial Ball Bearing - 11mm Wide, 1 Row, Round Bore, 3,370 Lb Static Capacity, 4,470 Lb Dynamic Capacity - Exact Tooling

SKF - 60mm Bore Diam, 95mm OD, Open Deep Groove Radial Ball Bearing - 11mm Wide, 1 Row, Round Bore, 3,370 Lb Static Capacity, 4,470 Lb Dynamic Capacity


Item #: 88051867
Brand: SKF
Model #: 16012
Exact Tooling IR#: 04

Features and Benefits

Deep groove ball bearings are used for high and very high speeds in operations, requiring little maintenance. They are designed with balls rolling between an inner and outer raceway. They are commonly used in pumps, gear motors and electric motors.
Open Bearing design without seals or shields and are intended to be lubricated in place and periodically maintained
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Deep Groove
Style Open
Bore Diameter (mm) 60.00
Outside Diameter (mm) 95.00
Width (mm) 11.00
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 3370
Dynamic Load Capacity (Lb.) 4470

$ 146.25
Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.5222; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1

Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.5222; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1


Item #: 81822280
Brand: GSG
Model #: GSG-CR-0.5222C

Product Specifications

Material Solid Carbide
Tolerance (Decimal Inch) 0.00000/-0.00002
Blank Number Wire Size #3
Inner Diameter (Decimal Inch) 0.5222
Calibrated Yes
Traceability Certification Included NIST
Go/No Go Go
Standards B47.1 Gage Standards; ASME B89.1.6
UNSPSC Code 41111619
Country of Origin UNITED STATES

$ 782.26
Bunting Bearing - 1" Inside x 1-1/4" Outside Diam, PTFE Sleeve Bearing - 1" OAL - Exact Tooling

Bunting Bearing - 1" Inside x 1-1/4" Outside Diam, PTFE Sleeve Bearing - 1" OAL


Item #: 35401025
Brand: Bunting Bearing
Model #: BJ7S162008
Exact Tooling IR#: 04

Product Specifications
Inside Diameter (Inch) 1
Outside Diameter (Inch) 1-1/4
Overall Length (Inch) 1
Material PTFE

$ 37.40
Brand: Norton / Part #: 66260392676

Brand: Norton / Part #: 66260392676


Item #: 98690977
Brand: Norton
Model #: 66260392676

Product Specifications

Point Shape Ball
Point Shape Code 4437CC
Abrasive Material CBN Electroplated
Tooth Style Single Cut
Grade Coarse
Grit 100
Shank Diameter (Decimal Inch) 1/4 in
Shank Length (Decimal Inch) 0.2500
Overall Length (Decimal Inch) 3.0000
Head Diameter (Inch) 0.437 in
Head Thickness (Decimal Inch) 0.3750
Color Silver

$ 92.69
Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Blank Number Wire Size: #000; Inner Diameter (Decimal Inch): 0.0479; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa

Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Blank Number Wire Size: #000; Inner Diameter (Decimal Inch): 0.0479; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa


Item #: 75853093
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.0479MC

Product Specifications

Material Solid Carbide
Tolerance (Decimal Inch) +0.00001/-0.00001
Blank Number Wire Size #000
Inner Diameter (Decimal Inch) 0.0479
Calibrated Yes
Traceability Certification Included NIST
Standards B47.1 Gage Standards; ASME B89.1.6
Go/No Go Master
UNSPSC Code 41111619
Country of Origin UNITED STATES

$ 828.58
Pry Bars; Prybar Type: Wrecking Bar; End Angle: Offset; Overall Length Range: 36" - 47.9"; End Style: Hardened Forged Steel; Material: Steel; Bar Shape: Octagonal

Pry Bars; Prybar Type: Wrecking Bar; End Angle: Offset; Overall Length Range: 36" - 47.9"; End Style: Hardened Forged Steel; Material: Steel; Bar Shape: Octagonal


Item #: 77742245
Brand: Bahco
Model #: WBB700

Product Specifications

Prybar Type Wrecking Bar
End Angle Offset
Overall Length Range 36" - 47.9"
End Style Hardened Forged Steel
Material Steel
Bar Shape Octagonal
Overall Length (Inch) 38-37/64
Overall Width 32
Color Black
Insulated No
Features Shaft hardness 25 HRC to 36 HRC; Heat treatment on the nail's areas; Hexagonal bar; Bent end and flat end body; 810 mm to 685 mm length; 45 HRC to 53 HRC in the nails
UNSPSC Code 27112502
Country of Origin China

$ 20.66
USDI - 1 Row, 1-1/2" OD, 5/8" Bore Diam, Round Open Conveyor Roller Bearing - 135 Lb Capacity, 550 Max RPM, with Flange, Steel with Steel Housing - Exact Tooling

USDI - 1 Row, 1-1/2" OD, 5/8" Bore Diam, Round Open Conveyor Roller Bearing - 135 Lb Capacity, 550 Max RPM, with Flange, Steel with Steel Housing


Item #: 36559953
Brand: USDI
Model #: AF4048
Exact Tooling IR#: 04

Features and Benefits

Conveyor roller bearings are designed to accommodate loads where high levels of exposure to contamination are present. They are economical and are used in conveyor systems.
Open bearings are designed with an extended inner ring or flange that can improve shaft support and eliminate the need for location spacers
Radial ball bearings with a flange axially locates the bearing in the housing and eliminates the need for housing shoulders or snap ring.
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Conveyor Roller Bearing
Style Open
Bore Diameter (Inch) 5/8
Outside Diameter (Decimal Inch) 1.5000
Flange Type With Flange
Number of Rows 1
Bore Type Round
Housing Material Steel
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 135
Dynamic Load Capacity (Lb.) 135
Ball Material Steel
Maximum RPM 550

$ 29.07
Value Collection - 1/2" ID, 1.126" OAL x 4" OAH 2-Bolt Flange - 1,060 Lb Static Cap, 2,110 Lb Dyn Cap, 3" Btw Mnt Hole Ctrs, Stamped Steel Rubber Mount - Exact Tooling

Value Collection - 1/2" ID, 1.126" OAL x 4" OAH 2-Bolt Flange - 1,060 Lb Static Cap, 2,110 Lb Dyn Cap, 3" Btw Mnt Hole Ctrs, Stamped Steel Rubber Mount


Item #: 05546908
Brand: Value Collection
Exact Tooling IR#: 04

Product Specifications
Type 2-Bolt Flange
Inside Diameter (Decimal Inch) 0.5000
Inside Diameter (Inch) 1/2
Width (Decimal Inch) 1.1260
Overall Length (Decimal Inch) 1.1260
Overall Height (Inch) 4
Overall Height (Decimal Inch) 4.0000
Static Load Capacity (Pounds) 1060.00
Dynamic Load Capacity (Pounds) 2110
Distance Between Mounting Hole Centers (Decimal Inch) 3.0000
Material "Stamped Steel Flange Housing w/ Rubber OD & 1/2" Bearing"
Bolt Size (Inch) 1/4
Bolt Size (Decimal Inch) 0.2500

$ 16.05
Igus - 7/8" Inside x 1-1/4" Outside Diam, Thermoplastic Sleeve Bearing - 1-1/4" Outside Diam, 1/16" Flange Thickness, 1-1/4" OAL - Exact Tooling

Igus - 7/8" Inside x 1-1/4" Outside Diam, Thermoplastic Sleeve Bearing - 1-1/4" Outside Diam, 1/16" Flange Thickness, 1-1/4" OAL


Item #: 02560530
Brand: Igus
Model #: GFI-1416-20
Exact Tooling IR#: 04

Product Specifications
Inside Diameter (Inch) 7/8
Outside Diameter (Inch) 1-1/4
Overall Length (Inch) 1-1/4
Material Thermoplastic
Flange Thickness (Decimal Inch) 0.0620
Flange Outside Diameter (Decimal Inch) 1.2500

$ 27.20
Nice - 5/16" Bore Diam, 7/8" OD, Double Shield Semi Ground Extra Light Radial Ball Bearing - 9/32" Wide, 1 Row, Round Bore, 255 Lb Static Capacity, 325 Lb Dynamic Capacity - Exact Tooling

Nice - 5/16" Bore Diam, 7/8" OD, Double Shield Semi Ground Extra Light Radial Ball Bearing - 9/32" Wide, 1 Row, Round Bore, 255 Lb Static Capacity, 325 Lb Dynamic Capacity


Item #: 59145797
Brand: Nice
Model #: 3003DSTNTG18
Exact Tooling IR#: 04

Features and Benefits

Semi-ground extra light ball bearings are used at up to speeds of 5,000 RPMs
Double shield refers to two shields, one on each side of the bearing. The shield is located on the outer race does not make contact with the inner race. Ideal for very high speeds, but does not prevent smaller contaminants from entering the bearing. They are more economical than seals.
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Semi Ground Extra Light
Style Double Shield
Bore Diameter (Inch) 5/16
Bore Diameter (Decimal Inch) 0.3125
Outside Diameter (Inch) 7/8
Outside Diameter (Decimal Inch) 0.8750
Width (Inch) 9/32
Width (Decimal Inch) 0.2813
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Static Load Capacity (Lb.) 255
Dynamic Load Capacity (Lb.) 325

$ 18.28
Igus - 7/8" Inside x 1" Outside Diam, Thermoplastic Sleeve Bearing - 1-1/4" Outside Diam, 1/16" Flange Thickness, 1" OAL - Exact Tooling

Igus - 7/8" Inside x 1" Outside Diam, Thermoplastic Sleeve Bearing - 1-1/4" Outside Diam, 1/16" Flange Thickness, 1" OAL


Item #: 02559615
Brand: Igus
Model #: MFI-1416-16
Exact Tooling IR#: 04

Product Specifications
Inside Diameter (Inch) 7/8
Outside Diameter (Inch) 1
Overall Length (Inch) 1
Material Thermoplastic
Flange Thickness (Decimal Inch) 0.0620
Flange Outside Diameter (Decimal Inch) 1.2500

$ 15.85
SKF - 35mm Bore Diam, 80mm OD, Open Angular Contact Radial Ball Bearing - 21mm Wide, 1 Row, Round Bore, 24,500 Lb Static Capacity, 39,000 Lb Dynamic Capacity - Exact Tooling

SKF - 35mm Bore Diam, 80mm OD, Open Angular Contact Radial Ball Bearing - 21mm Wide, 1 Row, Round Bore, 24,500 Lb Static Capacity, 39,000 Lb Dynamic Capacity


Item #: 45670403
Brand: SKF
Model #: 7307 BEGAP
Exact Tooling IR#: 04

Features and Benefits

Open Bearing design without seals or shields and are intended to be lubricated in place and periodically maintained
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Angular Contact
Style Open
Bore Diameter (mm) 35.00
Outside Diameter (mm) 80.00
Outside Diameter (Decimal Inch) 3.1500
Width (Decimal Inch) 0.8300
Width (mm) 21.00
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Contact Angle 40
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 24500
Dynamic Load Capacity (Lb.) 39000
Cage Material Plastic
Maximum RPM 9500

$ 178.59
Value Collection - 3/32" Bore Diam, 5/16" OD, Double Shield Miniature Radial Ball Bearing - 9/64" Wide, 1 Row, Round Bore, 40 Lb Static Capacity, 124 Lb Dynamic Capacity - Exact Tooling

Value Collection - 3/32" Bore Diam, 5/16" OD, Double Shield Miniature Radial Ball Bearing - 9/64" Wide, 1 Row, Round Bore, 40 Lb Static Capacity, 124 Lb Dynamic Capacity


Item #: 35381458
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Minature radial ball bearings are ideal for spall apces and low friction applications. They are used in areas where there is low opperating torque and with bore and outside diamater tolerance ranges of +0.0000" to -0.0002".
Double shield refers to two shields, one on each side of the bearing. The shield is located on the outer race does not make contact with the inner race. Ideal for very high speeds, but does not prevent smaller contaminants from entering the bearing. They are more economical than seals.
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Miniature
Style Double Shield
Bore Diameter (Decimal Inch) 0.0937
Outside Diameter (Decimal Inch) 0.3125
Width (Decimal Inch) 0.1406
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Housing Material Stainless Steel
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 40
Dynamic Load Capacity (Lb.) 124
ABEC Scale ABEC-5
Inner Ring Width (Inch) 0.1719
Bearing Number SRW1-5ZZ

$ 14.94
SKF - 12mm Bore Diam, 21mm OD, Open Thin Section Radial Ball Bearing - 5mm Wide, 1 Row, Round Bore, 151 Lb Static Capacity, 321 Lb Dynamic Capacity - Exact Tooling

SKF - 12mm Bore Diam, 21mm OD, Open Thin Section Radial Ball Bearing - 5mm Wide, 1 Row, Round Bore, 151 Lb Static Capacity, 321 Lb Dynamic Capacity


Item #: 76690999
Brand: SKF
Model #: 61801
Exact Tooling IR#: 04

Features and Benefits

Thin section radial ball bearings are designed thinner than standard ball brearings. They are very light and used at higher speeds.
Open Bearing design without seals or shields and are intended to be lubricated in place and periodically maintained
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Thin Section
Style Open
Bore Diameter (mm) 12.00
Outside Diameter (mm) 21.00
Width (mm) 5.00
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 151
Dynamic Load Capacity (Lb.) 321

$ 93.96
Koyo - Needle Roller Bearings Type: Drawn Cup Needle Bearing Bore Diameter: 0.3750 (Decimal Inch) - Exact Tooling

Koyo - Needle Roller Bearings Type: Drawn Cup Needle Bearing Bore Diameter: 0.3750 (Decimal Inch)


Item #: 19390814
Brand: Koyo
Model #: B610
Exact Tooling IR#: 04

Product Specifications

Needle Roller Bearings; Type: Drawn Cup Needle Bearing ; Bore Diameter: 0.3750 (Decimal Inch); Outside Diameter (Decimal Inch): 0.0563 ; Width (Decimal Inch): 0.6250 ; Dynamic Load Capacity: 2,340 (Pounds)
Type Drawn Cup Needle Bearing
Bore Diameter (Decimal Inch) 0.3750
Outside Diameter (Decimal Inch) 0.0563
Width (Decimal Inch) 0.6250
Dynamic Load Capacity (Pounds) 2340

$ 11.49
Masking Paper: 3 mm Wide, 33 m Long, 5.4 mil Thick, Blue

Masking Paper: 3 mm Wide, 33 m Long, 5.4 mil Thick, Blue


Item #: 12180840
Brand: Intertape
Model #: FM35..3

Product Specifications

Tape Type Masking Paper
Tape Material Crepe Paper
Length (Meters) 33
Thickness (mil) 5.4
Color Blue
Adhesive Material Rubber
Applications Masking
Width (mm - 2 Decimals) 3
Tensile Strength (Lb./Inch) 15.00
UNSPSC Code 31201503

$ 6.02