Email: sales@exacttooling.com
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

MSC Up To 2022 Part 1 - (25001 Products)

Parker - Direct Acting, Thermoplastic Solenoid Valve - Normally Closed, 232 Max PSI, FKM Seal - Exact Tooling

Parker - Direct Acting, Thermoplastic Solenoid Valve - Normally Closed, 232 Max PSI, FKM Seal


Item #: 91208769
Brand: Parker
Model #: P2FCH447
Exact Tooling IR#: 04

Product Specifications
Valve Type Direct Acting
Maximum Working Pressure (psi) 232.00
Valve Unactuated State Normally Closed
Body Material Thermoplastic
Seal Material FKM
Voltage 12VDC
CV Factor NC 0.035
Minimum Working Pressure (psi) 22.0
Maximum Working Pressure (psi) 232
Special Item Information For Use with Parker Viking Xtreme Valve
Coil Type Class F

$ 41.02
MSA - Hard Hats Type: Standard Adjustment: Ratchet - Exact Tooling

MSA - Hard Hats Type: Standard Adjustment: Ratchet


Item #: 18129635
Brand: MSA
Model #: 10204771

Features and Benefits

Ratchet adjustments systems are designed with a knob for turning and locking into place.
Type I hard hats are used to reduce the force of impacts from falling overhead.
Class E hard hats are used for electrical applications and protect against contact with high voltage conductors. They have the highest rating and are tested at 20,000 volts AC for three minutes. Class E hard hats also meet Class G and Class C regulations. Class E was formerly designated Class B.

Product Specifications

Hard Hats; Type: Standard ; Adjustment: Ratchet ; Suspension Type: 4-Point ; ANSI Type: I ; Class Rating: E ; Material: Polyethylene
Type Standard
Adjustment Ratchet
Suspension Type 4-Point
ANSI Type I
Class Rating E
Material Polyethylene
Color White, Red, Black
Slotted Yes
Vented Yes
Quick Reversing Suspension No
Suspension Material High Density Polyethelene
Additional Information V-Gard, Hard Hat, Safety Helmet
Description Hard HatsV-Gard Hydro Dip Cap - One Nation

$ 69.82
Seco - Spiral Point Taps Thread Size (mm): M6 Number of Flutes: 3 - Exact Tooling

Seco - Spiral Point Taps Thread Size (mm): M6 Number of Flutes: 3


Item #: 14419030
Brand: Seco
Model #: 10001220

Features and Benefits

Plug chamfers are the most commonly used chamfer and are designed for efficiently threading through and blind holes. They have 3 to 5 threads.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.

Product Specifications

Spiral Point Taps; Thread Size (mm): M6 ; Number of Flutes: 3 ; Chamfer: Plug ; Class of Fit: 4H ; Finish/Coating: Uncoated ; Material: HSS-E-PM
Thread Size (mm) M6
Number of Flutes 3
Chamfer Plug
Class of Fit 4H
Finish/Coating Uncoated
Material HSS-E-PM
Through Coolant No
Thread Direction Right Hand
Overall Length (mm) 90.0000
Oversize No
Thread Standard EGM
Thread Length (mm) 18.000
Series/List MTP
Tapping Depth (mm) 35.00
Shank Diameter (mm) 8.0000
Material Application Super Alloys; Difficult-to-Machine Steels
Material Application2 Super Alloys; Difficult-to-Machine Steels

$ 72.49
Guhring - 6.8mm 118° Solid Carbide Jobber Drill - FIREX Finish, Right Hand Cut, Spiral Flute, Straight Shank, 109mm OAL, Faceted Point - Exact Tooling

Guhring - 6.8mm 118° Solid Carbide Jobber Drill - FIREX Finish, Right Hand Cut, Spiral Flute, Straight Shank, 109mm OAL, Faceted Point


Item #: 62993860
Brand: Guhring
Model #: 9024640068000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
FIREX is a multi-layer coating that combines the characteristics of universal applicability of TiN, the heat resistance of TiAlN and the shock resistance of TiCN. FIREX is a proprietary coating exclusive to Guhring, Inc.
Spiral flutes are constructed with a higher flute angle to remove chips more easily.
Product Specifications
Drill Bit Size (mm) 6.80
Drill Bit Size (Decimal Inch) 0.2677
Drill Point Angle 118
Drill Bit Material Solid Carbide
Drill Bit Finish/Coating FIREX
Flute Type Spiral
Cutting Direction Right Hand
Shank Type Straight
Coolant Through No
Flute Length (mm) 69.00
Flute Length (Decimal Inch) 2.7200
Overall Length (mm) 109.00
Overall Length (Decimal Inch) 4.2900
Flute Length x Diameter Ratio 5xD
Point Type Faceted
Shank Diameter (mm) 6.80
Spiral Type Regular Spiral
Specification Designation DIN
Drill Bit Diameter Tolerance (mm) -0.012 to 0.000
Number of Flutes 2
Material Grade K40
Series/List 2464

$ 72.98
Facom - 6 Piece, 3.2mm x 5.5mm to 12mm x 13mm, Open End Wrench Set - Metric Measurement Standard, Satin Finish, Comes in Vinyl Roll - Exact Tooling

Facom - 6 Piece, 3.2mm x 5.5mm to 12mm x 13mm, Open End Wrench Set - Metric Measurement Standard, Satin Finish, Comes in Vinyl Roll


Item #: 84224278
Brand: Facom
Model #: 22.JE6T
Exact Tooling IR#: 04

Product Specifications
Tool Type Open End Wrench
System of Measurement Metric
Size Range (mm) 3.2 x 5.5 - 12.0 x 13.0
Number of Pieces 6
Finish/Coating Satin
Metric Size 10x11, 3.2x5.5, 12x13, 4x5, 6x7, 8x9
Warranty Mfr's Limited Lifetime Warranty
Container Type Vinyl Roll
Head Angle 15
PSC Code 5120

$ 71.02
Made in USA - 0.432" High Speed Steel 6 Flute Chucking Reamer - Exact Tooling

Made in USA - 0.432" High Speed Steel 6 Flute Chucking Reamer


Item #: 72034325
Brand: Made in USA
Model #:

Features and Benefits

High speed steel (HSS) provides good wear resistance and can be used in general purpose applications for both ferrous and nonferrous materials.
Straight flute reamers are the most common and are used in general purpose though-hole applications. They are used for reaming holes without interrupted cuts.
Product Specifications
Reamer Diameter (Decimal Inch) 0.4320
Reamer Material High Speed Steel
Shank Type Straight
Flute Type Straight
Overall Length (Inch) 7
Flute Length (Inch) 1-3/4
Variable Diameter Reamer Type None
Number of Flutes 6
Maximum Shank Diameter (Decimal Inch) 0.3730
Over/Under Size Reamer No
Dowel Pin Reamer No
Cutting Direction Right Hand
Reamer Finish/Coating Bright

$ 81.34
Value Collection - Packing Papers Type: Kraft Paper Rolls Style: Rolls - Exact Tooling

Value Collection - Packing Papers Type: Kraft Paper Rolls Style: Rolls


Item #: 47870563
Brand: Value Collection
Model #:

Product Specifications

Packing Papers; Type: Kraft Paper Rolls ; Style: Rolls ; Width (Inch): 24 ; Length (Feet): 900 ; Paper Weight: 40 (Pounds)
Type Kraft Paper Rolls
Style Rolls
Width (Inch) 24
Length (Feet) 900
Paper Weight (Pounds) 40

$ 86.88
Interstate - 6" Wide x 4-1/2" Deep x 5" High Cast Iron Partially Machined Angle Plate - Slotted Plate, Through-Slots on Surface, Webbed, Single Plate - Exact Tooling

Interstate - 6" Wide x 4-1/2" Deep x 5" High Cast Iron Partially Machined Angle Plate - Slotted Plate, Through-Slots on Surface, Webbed, Single Plate


Item #: 00144048
Brand: Interstate
Exact Tooling IR#: 04

Features and Benefits

Cast iron, also called semi-steel, is extremely strong and ideal for high-heat applications.
Partially machined angle plates are used for general purpose machining, close tolerance layout and inspection set-up. They are versatile and also used as vertical reference.
Slotted angle plates are designed with clamping slots for mounting, layout and inspection operations. They can be used as backing plates and constructed with varying spacing between slots and holes.
Product Specifications
Width (Inch) 6
Depth (Inch) 4-1/2
Height (Inch) 5
Material Cast Iron
Finish Type Partially Machined
Plate Surface Through-Slots
Plate Style Slotted
Plate Design Webbed
Single or Pair Single

$ 82.31
M.A. Ford - #21 118° Solid Carbide Jobber Drill - Exact Tooling

M.A. Ford - #21 118° Solid Carbide Jobber Drill


Item #: 60011814
Brand: M.A. Ford
Model #: 20415900T

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Spiral flutes are constructed with a higher flute angle to remove chips more easily.
Product Specifications
Drill Bit Size (Wire) #21
Drill Bit Size (Decimal Inch) 0.1590
Drill Point Angle 118
Drill Bit Material Solid Carbide
Drill Bit Finish/Coating TiN
Flute Type Spiral
Cutting Direction Right Hand
Shank Type Straight
Coolant Through No
Flute Length (Inch) 1-3/8
Flute Length (Decimal Inch) 1.3750
Overall Length (Decimal Inch) 2.5000
Overall Length (Inch) 2-1/2
Flute Length x Diameter Ratio 5xD
Point Type Four Facet
Shank Diameter (Decimal Inch) 0.1590
Spiral Type Regular Spiral
Specification Designation Not Specified
Drill Bit Diameter Tolerance (Decimal Inch) +0.0000 to -0.0005
Number of Flutes 2
Additional Information Modified Standard, Non-Returnable & Non-Cancelable
Series/List 204

$ 39.28
Wilkerson - Filter, Regulator & Lubricator (FRL) Units Configuration: 1 Pc. Filter/Regulator Body Type: Miniature - Exact Tooling

Wilkerson - Filter, Regulator & Lubricator (FRL) Units Configuration: 1 Pc. Filter/Regulator Body Type: Miniature


Item #: 11760279
Brand: Wilkerson
Model #: B08-02-FK00B

Product Specifications

Filter, Regulator & Lubricator (FRL) Units; Configuration: 1 Pc. Filter/Regulator ; Body Type: Miniature ; Port Size NPT: 1/4 ; Maximum Supply Pressure (psi): 150 ; Height (Inch): 6.96 ; Width (Decimal Inch): 1.5800
Configuration 1 Pc. Filter/Regulator
Body Type Miniature
Port Size NPT 1/4
Maximum Supply Pressure (psi) 150
Height (Inch) 6.96
Width (Decimal Inch) 1.5800
Bowl Material Polycarbonate
Standard Cubic Feet Per Minute 148.00
Includes Sight Glass No
Bowl Guard Yes
Brackets Included No
Filter Bowl Capacity (oz.) 0.4
Drain Type Manual Drain
Gauge Port Size (Inch) 1/8
Pressure Gauge Included No
Minimum Temperature (F) -13
Maximum Temperature (F) 125
Micron Rating 5µ
Series 08
Range 0 - 125
Modular Connection Yes

$ 58.09
USA Sealing - 120 x 6 x 1/8" Black EPDM Strip - Exact Tooling

USA Sealing - 120 x 6 x 1/8" Black EPDM Strip


Item #: 15904782
Brand: USA Sealing
Model #: BULK-RS-E60-434

Product Specifications
Material EPDM
Thickness (Inch) 1/8
Width (Inch) 6
Length Type Stock Length
Length (Inch) 120
Durometer (Shore A) 60
Tensile Strength (psi) 1000
Color Black
Backing Type Plain
Maximum Temperature (F) 250
Minimum Temperature (F) -50
Minimum Density (Lb./Cu. Ft.) 94.00
Grade Standard
Durometer (Shore A) 60A

$ 111.47
Dip Seal - Yellow Oil Exuding Strippable Plastic Coating - 5 Lbs., 500 Square Inch/Lb. Coverage, 350° Dipping Temp, Cellulose Based Material - Exact Tooling

Dip Seal - Yellow Oil Exuding Strippable Plastic Coating - 5 Lbs., 500 Square Inch/Lb. Coverage, 350° Dipping Temp, Cellulose Based Material


Item #: 00985549
Brand: Dip Seal
Model #: DS303 TYPE 1
Exact Tooling IR#: 04

Product Specifications
Type Strippable Plastic Coating
Formula Type Oil-Exuding
Color Yellow
Container Size (Lb.) 5.00
Coverage (Sq. In./Lb.) 500
Dipping Temperature 350
Additional Information Cellulose Based Material
PSC Code 8010

$ 68.00
USA Sealing - 1' x 2" x 2" White Acetal Square Bar - Exact Tooling

USA Sealing - 1' x 2" x 2" White Acetal Square Bar


Item #: 11907151
Brand: USA Sealing
Model #: BULK-PS-AC-167

Features and Benefits

Square cross-section shapes offer good high pressure seals, but are best used in static applications. They can be used as a direct replacement for a round O-ring.

Product Specifications

1' x 2" x 2" White Acetal Square Bar -
Material Acetal
Shape Square
Height (Inch) 2
Width (Inch) 2
Length (Feet) 1
Color White

$ 54.60
Zebra Skimmers - Oil Skimmer Tube - Exact Tooling

Zebra Skimmers - Oil Skimmer Tube


Item #: 72926686
Brand: Zebra Skimmers
Model #: ZT8-11

Product Specifications
Type Tube
For Use With Tube Oil Skimmer

$ 85.95
USA Sealing - 48" x 24" x 1/8" Black Neoprene Sheet - Exact Tooling

USA Sealing - 48" x 24" x 1/8" Black Neoprene Sheet


Item #: 96474135
Brand: USA Sealing
Model #: RS-NFR60-26

Product Specifications
Material Neoprene
Thickness (Inch) 1/8
Durometer (Shore A) 60A
Width (Inch) 24
Length (Inch) 48
Color Black
Tensile Strength 1000 psi
Minimum Temperature (F) -30.000
Maximum Temperature (F) 250.000
Backing Type Plain
Minimum Density (Lb./Cu. Ft.) 93.723
Additional Information Fabric-Reinforced

$ 94.62
Bondhus - 11 Piece T6 to T50 T-Handle Cushion Grip Torx Key Set - T6, T8, T10, T15, T20, T25, T27, T30, T40, T45, T50 Torx Size - Exact Tooling

Bondhus - 11 Piece T6 to T50 T-Handle Cushion Grip Torx Key Set - T6, T8, T10, T15, T20, T25, T27, T30, T40, T45, T50 Torx Size


Item #: 60986593
Brand: Bondhus
Model #: 33091
Exact Tooling IR#: 04

Product Specifications
End Type Torx
Torx Size Range T6 - T50
Handle Type T-Handle Cushion Grip
Number of Pieces 11
Torx Size T6; T8; T10; T15; T20; T25; T27; T30; T40; T45; T50
Fastener Type Torx
Color Green
PSC Code 5120

$ 80.93
Allied Machine and Engineering - 36mm Diam x 1/4" Thick, Seat Code 3, 132° Included Angle Spade Drill Insert - AM200 Coated, Cobalt, Grade Super Cobalt, Series GEN2 T-A - Exact Tooling

Allied Machine and Engineering - 36mm Diam x 1/4" Thick, Seat Code 3, 132° Included Angle Spade Drill Insert - AM200 Coated, Cobalt, Grade Super Cobalt, Series GEN2 T-A


Item #: 04597159
Brand: Allied Machine and Engineering
Model #: 453H-36
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
AM200 coating allows for the best performance in minimum quantity lubricant applications. It offers excellent wear characteristics, a high heat threshold and ideal for most high penetration drilling applications. AM200 is a proprietary coating exclusive to Allied Machine.
Product Specifications
Series Name GEN2 T-A
Diameter (Decimal Inch) 1.4173
Diameter (mm) 36.00
Series Code/Seat Size 3
Material Cobalt
Coating AM200
Thickness (Decimal Inch) 0.2500
Included Angle Degree 132
Manufacturer's Grade Super Cobalt

$ 67.75
Techniks - Retention Knobs Type: Standard Taper Size: CAT50 - Exact Tooling

Techniks - Retention Knobs Type: Standard Taper Size: CAT50


Item #: 91521617
Brand: Techniks
Model #: 21132-C

Features and Benefits

Retention knobs, also known as pull studs, are threaded components that enable the mounting of a toolholder to the spindle of a CNC milling machine. Retention knobs are held in the machine by a clamp or spring.

Product Specifications

Retention Knobs; Type: Standard ; Taper Size: CAT50 ; Thread Size: 1-8 ; Angle Radius: 45.00 ; Knob Diameter (mm): 23.01 ; Through Coolant: Yes
Type Standard
Taper Size CAT50
Thread Size 1-8
Angle Radius 45.00
Knob Diameter (mm) 23.01
Through Coolant Yes
Overall Length (Decimal Inch) 3.3460

$ 103.53
PRO-SOURCE - 21 Inch Diameter Carpet Cleaning Bonnet - Nylon - Exact Tooling

PRO-SOURCE - 21 Inch Diameter Carpet Cleaning Bonnet - Nylon


Item #: 45462579
Brand: PRO-SOURCE
Exact Tooling IR#: 04

Features and Benefits

Nylon has a low moisture absorption rate, conforms well to surfaces and is used for light and medium applications. It is used in both wet and dry environments.
Product Specifications
Type Carpet Cleaning Bonnet
Application Carpet
Pad/Brush Diameter (Inch) 21
Material Nylon

$ 40.35
USA Sealing - 1' x 8" x 1" Off White Nylon 6/6 Sheet - Exact Tooling

USA Sealing - 1' x 8" x 1" Off White Nylon 6/6 Sheet


Item #: 16588113
Brand: USA Sealing
Model #: BULK-PS-NYL-421

Product Specifications
Material Nylon 6/6
Thickness (Inch) 1
Width (Inch) 8
Length (Feet) 1
Tensile Strength (psi) 10000
Color Off-White
Hardness Rockwell M-85
Maximum Temperature (F) 240.000
Minimum Temperature (F) -40.000

$ 80.20