Email: sales@exacttooling.com
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

MSC Up To 2022 Part 2 - (25001 Products)

Mapal - 1.6mm 90° Solid Carbide Jobber Drill - Exact Tooling

Mapal - 1.6mm 90° Solid Carbide Jobber Drill


Item #: 13358288
Brand: Mapal
Model #: 30894668

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Spiral flutes are constructed with a higher flute angle to remove chips more easily.
Product Specifications
Drill Bit Size (mm) 1.60
Drill Point Angle 90
Drill Bit Material Solid Carbide
Drill Bit Finish/Coating Diamond
Flute Type Spiral
Cutting Direction Right Hand
Shank Type Straight
Coolant Through No
Flute Length (mm) 9.00
Overall Length (mm) 50.00
Flute Length x Diameter Ratio 5xD
Shank Diameter (mm) 4.00
Number of Flutes 2
Series/List SCD25

$ 237.48
Sola/Hevi-Duty - 1 Phase, 0.3 kVA, Control Transformer - 2 Input, 1 Output Winding, 60, 50/60 at 220 V x 440 V, 50/60 at 230 V x 460 V Hz, 5.09 Inch Deep x 4.53 Inch High, 131°F Temp Rise - Exact Tooling

Sola/Hevi-Duty - 1 Phase, 0.3 kVA, Control Transformer - 2 Input, 1 Output Winding, 60, 50/60 at 220 V x 440 V, 50/60 at 230 V x 460 V Hz, 5.09 Inch Deep x 4.53 Inch High, 131°F Temp Rise


Item #: 80252182
Brand: Sola/Hevi-Duty
Model #: E300
Exact Tooling IR#: 04

Features and Benefits

Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors.
Product Specifications
Power Rating (VA) 300
Power Rating (kVA) 0.30
Input Voltage 220 x 440 V; 230 x 460 V; 240 x 480 V
Output Voltage 110 V; 115 V; 120 V
Fuse Status NonFused
Number of Phases 1
Number of Input Windings 2
Number of Output Windings 1
Temperature Rise (F) 131
Frequency Rating (Hz) 60; 50/60 @ 220 V x 440 V; 50/60 @ 230 V x 460 V
Overall Width (Decimal Inch) 5-1/4
Overall Height (Decimal Inch) 4.5300
Overall Depth (Decimal Inch) 5.0900
Includes Secondary Fuse Holder
Standards Met ANSI C89.1; cULus Listed E77014; IEC 707; ISO Class 1210; NEMA ST 1

$ 164.81
Lytron - 6" Long x 3-1/2" High, Straight Connection Stainless Steel Tube Cold Plate - 3/8 OD Tube, 4-Pass Fluid Path, Deionized Water or Corrosive Fluids Cooling, 1/2" Thick - Exact Tooling

Lytron - 6" Long x 3-1/2" High, Straight Connection Stainless Steel Tube Cold Plate - 3/8 OD Tube, 4-Pass Fluid Path, Deionized Water or Corrosive Fluids Cooling, 1/2" Thick


Item #: 07440597
Brand: Lytron
Model #: CP10G16
Exact Tooling IR#: 04

Product Specifications
Recommended Cooling Fluids Deionized Water or Corrosive Fluids
Fluid Path Configuration 4-Pass
Tube Material Stainless Steel
Connection Type Straight
Connection Size 3/8 OD Tube
Length (Decimal Inch) 6.000
Height (Inch) 3.5
Plate Material Aluminum
Thickness (Decimal Inch) 0.5000
Performance @ 0.5 GPM 0.029
Performance @ 1 GPM 0.0235
Pressure Drop @ 0.5 GPM 0.24
Pressure Drop @ 1 GPM 0.90

$ 294.78
Norton - 16" Diam x 8" Hole x 2" Wide Centerless & Cylindrical Grinding Wheel - 60 Grit, Aluminum Oxide, Medium Grade - Exact Tooling

Norton - 16" Diam x 8" Hole x 2" Wide Centerless & Cylindrical Grinding Wheel - 60 Grit, Aluminum Oxide, Medium Grade


Item #: 81163230
Brand: Norton
Model #: 66253246968
Exact Tooling IR#: 04

Features and Benefits

Aluminum oxide is the most commonly used abrasive. Best-suited for general purpose deburring and blending, it is tough, economical and fracture-resistant. Commonly used on ferrous alloys, high-tensile materials, and wood.
Product Specifications
Wheel Diameter (Inch) 16
Wheel Width (Inch) 2
Hole Size (Inch) 8
Abrasive Material Aluminum Oxide
Grade Medium
Grit 60
Wheel Hardness L
Specification 57A60L5-V18
Maximum RPM 2030
Wheel Hardness Rating Medium

$ 254.80
Flexaust - 2-1/2" ID, 19 Hg Vac Rating, 30 psi, Polyurethane Vacuum & Duct Hose - 25' Long, Clear, 2.8" Bend Radius, -65 to 225°F - Exact Tooling

Flexaust - 2-1/2" ID, 19 Hg Vac Rating, 30 psi, Polyurethane Vacuum & Duct Hose - 25' Long, Clear, 2.8" Bend Radius, -65 to 225°F


Item #: 37445822
Brand: Flexaust
Model #: 8338025025
Exact Tooling IR#: 04

Product Specifications
Inside Diameter (Inch) 2-1/2
Working Pressure (psi) 30.00
Vacuum Rating 19
Material Polyurethane
Length (Feet) 25
Color Clear
Bend Radius (Decimal Inch) 2.80
Minimum Temperature (F) -65
Maximum Temperature (F) 225

$ 271.45
USA Sealing - 120 x 4 x 1/4" Black Buna-N Strip - Exact Tooling

USA Sealing - 120 x 4 x 1/4" Black Buna-N Strip


Item #: 13294129
Brand: USA Sealing
Model #: RS-BHS50-418

Product Specifications
Material Buna-N
Thickness (Inch) 1/4
Width (Inch) 4
Length Type Stock Length
Length (Inch) 120
Durometer (Shore A) 50
Tensile Strength (psi) 1500
Color Black
Backing Type Plain
Maximum Temperature (F) 250
Minimum Temperature (F) -30
Minimum Density (Lb./Cu. Ft.) 84.00
Grade High Strength
Durometer (Shore A) 50A

$ 223.97
Seco - Jobber Length Drill Bits Drill Bit Size (mm): 6.50 Drill Bit Size (Decimal Inch): 0.2560 - Exact Tooling

Seco - Jobber Length Drill Bits Drill Bit Size (mm): 6.50 Drill Bit Size (Decimal Inch): 0.2560


Item #: 18143578
Brand: Seco
Model #: 10004228

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Spiral flutes are constructed with a higher flute angle to remove chips more easily.

Product Specifications

Jobber Length Drill Bits; Drill Bit Size (mm): 6.50 ; Drill Bit Size (Decimal Inch): 0.2560 ; Drill Point Angle: 140 ; Drill Bit Material: Solid Carbide ; Drill Bit Finish/Coating: TiAlN ; Flute Type: Spiral
Drill Bit Size (mm) 6.50
Drill Bit Size (Decimal Inch) 0.2560
Drill Point Angle 140
Drill Bit Material Solid Carbide
Drill Bit Finish/Coating TiAlN
Flute Type Spiral
Cutting Direction Right Hand
Shank Type Straight
Coolant Through Yes
Flute Length (mm) 53.00
Overall Length (mm) 91.0000
Flute Length x Diameter Ratio 5xD
Point Type Standard
Shank Diameter (mm) 8.0000
Maximum Drilling Depth (mm) 35.00
Number of Flats 0
Number of Flutes 2
Series/List SD205

$ 230.00
3M - 36 Yd x 1" x 12 mil Silver Aluminum Foil Tape - Exact Tooling

3M - 36 Yd x 1" x 12 mil Silver Aluminum Foil Tape


Item #: 65522609
Brand: 3M
Model #: 7000049127

Features and Benefits

Aluminum foil tape is designed with a strong aluminum backing ideal for for several indoor and outdoor applications. It is resistant to heat, humidity, extreme temperatures and exposure from UV rays.
Product Specifications
Tape Type Foil Tape
Width (Inch) 1
Length Range 36 yd. - 71.9 yd.
Material Type Aluminum Foil
Color/Pattern Silver
Thickness (mil) 12.00
Adhesive Material Viscoelastic Polymer
Length 36 yd
Tensile Strength (Lb./Inch) 50.00
Minimum Operating Temperature (C) -60.00
Minimum Operating Temperature (F) -76.00
Maximum Operating Temperature (C) 20.00
Maximum Operating Temperature (F) 68.00
Applications Noise reduction

$ 231.48
Grobet - 12 Piece Swiss Pattern File Set - 6-1/4" Long, 2 Coarseness, Set Includes Barrette, Crossing, Equalling, Half Round, Knife, Marking, Round, Round Edge Joint, Slitting, Square, Three Square, Warding - Exact Tooling

Grobet - 12 Piece Swiss Pattern File Set - 6-1/4" Long, 2 Coarseness, Set Includes Barrette, Crossing, Equalling, Half Round, Knife, Marking, Round, Round Edge Joint, Slitting, Square, Three Square, Warding


Item #: 60237823
Brand: Grobet
Model #: 31.680
Exact Tooling IR#: 04

Features and Benefits

Swiss-pattern files are used for deburring, shaping and finishing. They are used when fine detailing or finishing is required.
Product Specifications
File Set Type Swiss
File Types Included Barrette; Crossing; Equalling; Half Round; Knife; Marking; Round; Round Edge Joint; Slitting; Square; Three Square; Warding
Number of Pieces 12
File Length (Inch) 6-1/4
Coarseness/Cut 2
Length of Cut (Inch) 3
Level of Precision Needle

$ 285.58
USA Sealing - 60" x 36" x 1/32" Black Neoprene Sheet - Exact Tooling

USA Sealing - 60" x 36" x 1/32" Black Neoprene Sheet


Item #: 96477682
Brand: USA Sealing
Model #: RS-NHS50-792

Product Specifications
Material Neoprene
Thickness (Inch) 1/32
Durometer (Shore A) 50A
Width (Inch) 36
Length (Inch) 60
Color Black
Grade High Strength
Tensile Strength 1500 psi
Minimum Temperature (F) -30.000
Maximum Temperature (F) 250.000
Backing Type Acrylic Adhesive
Minimum Density (Lb./Cu. Ft.) 84.3507

$ 172.56
USA Sealing - 6' x 48" x 3/16" Clear Cast Acrylic Sheet - Exact Tooling

USA Sealing - 6' x 48" x 3/16" Clear Cast Acrylic Sheet


Item #: 16586240
Brand: USA Sealing
Model #: BULK-PS-CAC-460

Product Specifications
Material Cast Acrylic
Thickness (Inch) 3/16
Width (Inch) 48
Length (Feet) 6
Tensile Strength (psi) 8000
Color Clear
Hardness Rockwell M-95
Maximum Temperature (F) 210.000
Minimum Temperature (F) 50.000

$ 270.30
USA Sealing - 36" x 36" x 1/4" Black Neoprene Sheet - Exact Tooling

USA Sealing - 36" x 36" x 1/4" Black Neoprene Sheet


Item #: 96473715
Brand: USA Sealing
Model #: RS-N70TXT-66

Product Specifications
Material Neoprene
Thickness (Inch) 1/4
Durometer (Shore A) 70A
Width (Inch) 36
Length (Inch) 36
Color Black
Tensile Strength 1000 psi
Minimum Temperature (F) -30.000
Maximum Temperature (F) 250.000
Backing Type Plain
Minimum Density (Lb./Cu. Ft.) 93.723
Additional Information Textured

$ 213.22
Made in USA - Size D, Straight Shank Hand Adjustable Reamer - 6-3/4" OAL, Right Hand Cut, High Speed Steel, Bright Finish - Exact Tooling

Made in USA - Size D, Straight Shank Hand Adjustable Reamer - 6-3/4" OAL, Right Hand Cut, High Speed Steel, Bright Finish


Item #: 02231041
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

High speed steel (HSS) provides good wear resistance and can be used in general purpose applications for both ferrous and nonferrous materials.
Bright provides a smooth, polished finish on the tool. It increases chip flow in softer materials such as aluminum, wood and plastic.
Product Specifications
Reamer Size D
Minimum Variable Diameter (Inch) 21/32
Maximum Variable Diameter (Inch) 23/32
Shank Type Straight
Overall Length (Inch) 6-3/4
Reamer Material High Speed Steel
Reamer Finish/Coating Bright

$ 464.00
SGS - 9/32" 145° Solid Carbide Jobber Drill - Exact Tooling

SGS - 9/32" 145° Solid Carbide Jobber Drill


Item #: 05490446
Brand: SGS
Model #: 51515

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive-resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloys, stainless steel, titanium, cast iron and carbon steel.
Spiral flutes are constructed with a higher flute angle to remove chips more easily.
Product Specifications
Drill Bit Size (Inch) 9/32
Drill Bit Size (Decimal Inch) 0.2813
Drill Point Angle 145
Drill Bit Material Solid Carbide
Drill Bit Finish/Coating AlTiN
Flute Type Spiral
Cutting Direction Right Hand
Shank Type Straight
Coolant Through No
Flute Length (Inch) 2-5/64
Flute Length (Decimal Inch) 2.0781
Overall Length (Decimal Inch) 3.6250
Overall Length (Inch) 3-5/8
Flute Length x Diameter Ratio 5xD
Point Type Standard
Shank Diameter (Inch) 5/16
Shank Diameter (Decimal Inch) 0.3125
Maximum Drilling Depth (Decimal Inch) 1.7969
Maximum Drilling Depth (Inch) 1-51/64
Spiral Type Regular Spiral
Shank Length (Inch) 1-7/16
Shank Length (Decimal Inch) 1.4375
Web Configuration Tapered
Drill Bit Diameter Tolerance (Decimal Inch) +0.00024 to +0.00083
Number of Flutes 2
Web Thinning Web-Thinned
Drill Bit Grade High Performance
Material Grade Micrograin
Series/List 135L

$ 205.50
1″ × 30″-220 Grit - Aluminum Oxide - Abrasive Belt

1″ × 30″-220 Grit - Aluminum Oxide - Abrasive Belt


Item #: MM44029220
Brand: Klingspor
Model #: 310220F01003004

Product Specifications
Width 1″
Backing Material Cotton
Length 30″
For Use With Portable Files
Abrasive Material Aluminum Oxide
Backing Weight X
Grit 220
Series CS310

$ 6.71
Mason Ind. - 18" Long x 18" Wide x 1" Thick, Neoprene ans Cork, Machinery Leveling Pad & Mat - Exact Tooling

Mason Ind. - 18" Long x 18" Wide x 1" Thick, Neoprene ans Cork, Machinery Leveling Pad & Mat


Item #: 86803434
Brand: Mason Ind.
Model #: NK18X18
Exact Tooling IR#: 04

Product Specifications

18" Long x 18" Wide x 1" Thick, Neoprene ans Cork, Machinery Leveling Pad & Mat -
Thickness (Inch) 1
Width (Inch) 18
Length (Inch) 18
Material Neoprene, Cork

$ 232.32
Guhring - Countersink Sets Countersink Type: Three Flute Minimum Head Diameter (Inch): 1/4 - Exact Tooling

Guhring - Countersink Sets Countersink Type: Three Flute Minimum Head Diameter (Inch): 1/4


Item #: 18937599
Brand: Guhring
Model #: 9056760010000

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.

Product Specifications

Countersink Sets; Countersink Type: Three Flute ; Minimum Head Diameter (Inch): 1/4 ; Maximum Head Diameter (Inch): 3/4 ; Minimum Included Angle: 82.00 ; Number of Flutes: 3 ; Countersink Material: Cobalt
Countersink Type Three Flute
Minimum Head Diameter (Inch) 1/4
Maximum Head Diameter (Inch) 3/4
Minimum Included Angle 82.00
Number of Flutes 3
Countersink Material Cobalt
Number of Pieces 6.000
Countersink Finish/Coating TiAlN
Set Includes (6) Countersinks
Countersink Application Countersinking
Storage Unit Type Molded Case With Foam
Shank Diameter (Decimal Inch) 1/2
Shank Diameter (Inch) 1/2
Storage Unit Material Plastic
Maximum Shank Diameter (Decimal Inch) 0.5000
Included Angle 82
Maximum Overall Length (Inch) 2.75
Shank Type Cylindrical Shank
Includes Pilot No
Countersink Head Only No
Attachment Method Shank
Cutting Direction Right Hand
Material Application2 Cast Iron; Stainless Steels; Steel
Material Application Cast Iron; Stainless Steels; Steel

$ 226.02
USA Sealing - Rubber & Foam Sheets Material: Buna-N Thickness (Inch): 1/4 - Exact Tooling

USA Sealing - Rubber & Foam Sheets Material: Buna-N Thickness (Inch): 1/4


Item #: 96170790
Brand: USA Sealing
Model #: BULK-RS-H80-62

Product Specifications

Rubber & Foam Sheets; Material: Buna-N ; Thickness (Inch): 1/4 ; Durometer (Shore A): 80A ; Width (Inch): 12.0000 ; Length (Inch): 36 ; Color: Black
Material Buna-N
Thickness (Inch) 1/4
Durometer (Shore A) 80A
Width (Inch) 12.0000
Length (Inch) 36
Color Black
Grade High Strength
Tensile Strength 1500
Minimum Temperature (F) -40.000
Maximum Temperature (F) 250.000
Backing Type Acrylic Adhesive

$ 227.22
Federal Hose - 3" ID, -60 to 400°F, Galvanized Steel Unlined Flexible Metal Duct Hose - 12" Bend Radius, 25' Long - Exact Tooling

Federal Hose - 3" ID, -60 to 400°F, Galvanized Steel Unlined Flexible Metal Duct Hose - 12" Bend Radius, 25' Long


Item #: 48533301
Brand: Federal Hose
Model #: 10076
Exact Tooling IR#: 04

Product Specifications
Inside Diameter (Inch) 3
Length (Feet) 25
Material Galvanized Steel
Bend Radius (Decimal Inch) 12.0000
Style Unlined
Minimum Temperature (F) -60.000
Maximum Temperature (F) 400.000

$ 306.93
USA Sealing - 6" x 6" x 3/8" Black Viton Foam Sheet - Exact Tooling

USA Sealing - 6" x 6" x 3/8" Black Viton Foam Sheet


Item #: 96489380
Brand: USA Sealing
Model #: ZUSAVFS7

Product Specifications
Material Viton Foam
Thickness (Inch) 3/8
Durometer (Shore OO) 40 - 60
Hardness Medium
Width (Inch) 6
Length (Inch) 6
Color Black
Grade Standard
Tensile Strength 100 psi
Minimum Temperature (F) -15.000
Maximum Temperature (F) 400.000
Backing Type Plain
Minimum Density (Lb./Cu. Ft.) 15
Foam Structure Closed Cell

$ 233.71