Safety > Personal Protective Equipment (ET04) - (25001 Products)
Safety > Personal Protective Equipment (ET04)
3/16″ Cutting Dia. × 3/16″ Shank Size × 3/4″ LOC × 3″ OAL, 5 Flute, Carbide, AlTiN Nano, Square End Mill
Item #: GE90835412C6
Brand: Harvey Tool
Model #: 835412-C6
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Usable Length (LU) | 3/4″ |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Applicable Material | | Steel | |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Length Group | 4D |
| Overall Length (OAL) | 3″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | AlTiN Nano |
| Decimal Equivalent | 0.188″ |
| Flute Count (NOF) | 5 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 44 Degrees |
| Shank Size (SS) | 3/16″ |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Square |
| Single / Double End | Single End |
$ 49.87
3/16″ Dia. × 0.561″ LOC × 3/16″ Shank Size × 2-1/2″ OAL, Flute, Carbide, Uncoated, Ballnose Endmill
Item #: GE90892212
Brand: Harvey Tool
Model #: 892212
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Corner Radius (RE) | 0.0938″ |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Length Group | 3D |
| Depth of Cut Maximum (APMX) | 0.561″ |
| End Shape | Ball Nose |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.1875″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Uncoated |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | No |
| Shank Type | Round |
| Single / Double End | Single End |
| Usable Length (LU) | 0.561″ |
$ 42.62
3/16″ Dia. × 0.563″ LOC × 1/4″ Shank Size × 2-1/2″ OAL, 6 Flute, Carbide, TiAlN Nano, Ballnose Endmill
Item #: GE90763512C6
Brand: Harvey Tool
Model #: 763512-C6
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Usable Length (LU) | 0.563″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Applicable Material | | Hard Materials | |
| Depth of Cut Maximum (APMX) | 0.563″ |
| Corner Radius (RE) | 0.0938″ |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | 3D |
| Cutting Edge Material | Carbide |
| End Shape | Ball Nose |
| Coating | TiAlN Nano |
| Decimal Equivalent | 0.1875″ |
| Flute Count (NOF) | 6 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 20 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
$ 48.74
3/16″ Dia. × 0.57″ LOC × 3/16″ Shank Size × 2″ OAL, 3 Flute, Carbide, Uncoated, Ballnose Endmill
Item #: GE90808812
Brand: Harvey Tool
Model #: 808812
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Usable Length (LU) | 0.57″ |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Applicable Material | | Other Non-Metallic Materials | |
| Depth of Cut Maximum (APMX) | 0.57″ |
| Corner Radius (RE) | 0.0938″ |
| Overall Length (OAL) | 2″ |
| Length Group | 3D |
| Cutting Edge Material | Carbide |
| End Shape | Ball Nose |
| Coating | Uncoated |
| Decimal Equivalent | 0.1875″ |
| Flute Count (NOF) | 3 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 20 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
$ 62.72
Engraving Cutter, 60 Degrees × 0.1965″ Depth of Cut × 2-1/2″ OAL × 1/4″ Cutting Dia. × 1/4″ Shank Dia., Tip Radius End, AlTiN, Carbide
Item #: GE90831430C3
Brand: Harvey Tool
Model #: 831430-C3
| Product Specifications | |
|---|---|
| Angle | 60 Degrees |
| Tool Type | Engraving Cutter |
| Coating | AlTiN |
| Series/List # | Specialty Profiles |
| Depth of Cut Maximum (APMX) | 0.1965″ |
| Cutting Diameter (DC) | 1/4″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| End Shape | Tip Radius |
| Decimal Equivalent | 0.25″ |
| Overall Length (OAL) | 2-1/2″ |
| Point Angle (SIG) | 60 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Single / Double End | Single End |
$ 50.78
Engraving Cutter, 60 Degrees × 0.1965″ Depth of Cut × 2-1/2″ OAL × 1/4″ Cutting Dia. × 1/4″ Shank Dia., Tip Radius End, Uncoated, Carbide
Item #: GE90831430
Brand: Harvey Tool
Model #: 831430
| Product Specifications | |
|---|---|
| Angle | 60 Degrees |
| Tool Type | Engraving Cutter |
| Coating | Uncoated |
| Series/List # | Specialty Profiles |
| Depth of Cut Maximum (APMX) | 0.1965″ |
| Cutting Diameter (DC) | 1/4″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| End Shape | Tip Radius |
| Decimal Equivalent | 0.25″ |
| Overall Length (OAL) | 2-1/2″ |
| Point Angle (SIG) | 60 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Single / Double End | Single End |
$ 42.52
Engraving Cutter, 60 Degrees × 0.204″ Depth of Cut × 2-1/2″ OAL × 1/4″ Cutting Dia. × 1/4″ Shank Dia., Flat End, AlTiN, Carbide
Item #: GE9018232C3
Brand: Harvey Tool
Model #: 18232-C3
| Product Specifications | |
|---|---|
| Angle | 60 Degrees |
| Tool Type | Engraving Cutter |
| Coating | AlTiN |
| Series/List # | Specialty Profiles |
| Depth of Cut Maximum (APMX) | 0.204″ |
| Cutting Diameter (DC) | 1/4″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| End Shape | Flat |
| Decimal Equivalent | 0.25″ |
| Overall Length (OAL) | 2-1/2″ |
| Point Angle (SIG) | 60 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Single / Double End | Single End |
$ 37.32
Engraving Cutter, 60 Degrees × 0.204″ Depth of Cut × 2-1/2″ OAL × 1/4″ Cutting Dia. × 1/4″ Shank Dia., Flat End, Uncoated, Carbide
Item #: GE9018232
Brand: Harvey Tool
Model #: 18232
| Product Specifications | |
|---|---|
| Angle | 60 Degrees |
| Tool Type | Engraving Cutter |
| Coating | Uncoated |
| Series/List # | Specialty Profiles |
| Depth of Cut Maximum (APMX) | 0.204″ |
| Cutting Diameter (DC) | 1/4″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| End Shape | Flat |
| Decimal Equivalent | 0.25″ |
| Overall Length (OAL) | 2-1/2″ |
| Point Angle (SIG) | 60 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Single / Double End | Single End |
$ 29.07
Engraving Cutter, 60 Degrees × 0.208″ Depth of Cut × 2-1/2″ OAL × 1/4″ Cutting Dia. × 1/4″ Shank Dia., End, TiB2, Carbide
Item #: GE90824716C8
Brand: Harvey Tool
Model #: 824716-C8
| Product Specifications | |
|---|---|
| Angle | 60 Degrees |
| Series/List # | Specialty Profiles |
| Coating | TiB2 |
| Cutting Diameter (DC) | 1/4″ |
| Depth of Cut Maximum (APMX) | 0.208″ |
| Measurement Type | Inch |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.25″ |
| Overall Length (OAL) | 2-1/2″ |
| Point Angle (SIG) | 60 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Single / Double End | Single End |
| Tool Type | Engraving Cutter |
$ 40.69
Engraving Cutter, 60 Degrees × 0.212″ Depth of Cut × 2-1/2″ OAL × 1/4″ Cutting Dia. × 1/4″ Shank Dia., Flat End, AlTiN Nano, Carbide
Item #: GE90866716C6
Brand: Harvey Tool
Model #: 866716-C6
| Product Specifications | |
|---|---|
| Angle | 60 Degrees |
| Tool Type | Engraving Cutter |
| Coating | AlTiN Nano |
| Series/List # | Specialty Profiles |
| Depth of Cut Maximum (APMX) | 0.212″ |
| Cutting Diameter (DC) | 1/4″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| End Shape | Flat |
| Decimal Equivalent | 0.25″ |
| Overall Length (OAL) | 2-1/2″ |
| Point Angle (SIG) | 60 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Single / Double End | Single End |
$ 43.44
Engraving Cutter, 60 Degrees × 0.212″ Depth of Cut × 2-1/2″ OAL × 1/4″ Cutting Dia. × 1/4″ Shank Dia., Tip Radius End, TiB2, Carbide
Item #: GE90774930C8
Brand: Harvey Tool
Model #: 774930-C8
| Product Specifications | |
|---|---|
| Angle | 60 Degrees |
| Tool Type | Engraving Cutter |
| Coating | TiB2 |
| Series/List # | Specialty Profiles |
| Depth of Cut Maximum (APMX) | 0.212″ |
| Cutting Diameter (DC) | 1/4″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| End Shape | Tip Radius |
| Decimal Equivalent | 0.25″ |
| Overall Length (OAL) | 2-1/2″ |
| Point Angle (SIG) | 60 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Single / Double End | Single End |
$ 47.31
Engraving Cutter, 60 Degrees × 0.212″ Depth of Cut × 2-1/2″ OAL × 1/4″ Cutting Dia. × 1/4″ Shank Dia., Tip Radius End, Uncoated, Carbide
Item #: GE90774930
Brand: Harvey Tool
Model #: 774930
| Product Specifications | |
|---|---|
| Angle | 60 Degrees |
| Tool Type | Engraving Cutter |
| Coating | Uncoated |
| Series/List # | Specialty Profiles |
| Depth of Cut Maximum (APMX) | 0.212″ |
| Cutting Diameter (DC) | 1/4″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| End Shape | Tip Radius |
| Decimal Equivalent | 0.25″ |
| Overall Length (OAL) | 2-1/2″ |
| Point Angle (SIG) | 60 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Single / Double End | Single End |
$ 37.94
Engraving Cutter, 60 Degrees × 0.32″ Depth of Cut × 2-1/2″ OAL × 3/8″ Cutting Dia. × 3/8″ Shank Dia., Pointed End, AlTiN, Carbide
Item #: GE9029624C3
Brand: Harvey Tool
Model #: 29624-C3
| Product Specifications | |
|---|---|
| Angle | 60 Degrees |
| Tool Type | Engraving Cutter |
| Coating | AlTiN |
| Series/List # | Specialty Profiles |
| Depth of Cut Maximum (APMX) | 0.32″ |
| Cutting Diameter (DC) | 3/8″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| End Shape | Pointed |
| Decimal Equivalent | 0.375″ |
| Overall Length (OAL) | 2-1/2″ |
| Point Angle (SIG) | 60 Degrees |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Single / Double End | Single End |
$ 57.31
Keyseat Cutter, 0.393″ Dia. × 7/16″ Shank Dia. × 0.133″ CW × 3-1/2″ OAL, 6 Teeth, 90 Degrees, Carbide, Round Shank, AlTiN, Specialty Profiles
Item #: GE9019579C3
Brand: Harvey Tool
Model #: 19579-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.393″ |
| Protruding Length (LPR) | 1-1/2″ |
| Connection Diameter Machine Side (DCONMS) | 7/16″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 3-1/2″ |
| Coating | AlTiN |
| Number of Teeth | 6 |
| Shank Type | Round |
| Cutting Width (CW) | 0.133″ |
| Flute Type | Helical |
| Angle | 90 Degrees |
| Series/List # | Specialty Profiles |
| Cutting Direction (HAND) | Right Hand |
| Measurement Type | Inch |
| Neck Diameter (DN) | 0.26″ |
$ 172.94
Keyseat Cutter, 0.393″ Dia. × 7/16″ Shank Dia. × 0.133″ CW × 3-1/2″ OAL, 6 Teeth, 90 Degrees, Carbide, Round Shank, Uncoated, Specialty Profiles
Item #: GE9019579
Brand: Harvey Tool
Model #: 19579
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.393″ |
| Protruding Length (LPR) | 1-1/2″ |
| Connection Diameter Machine Side (DCONMS) | 7/16″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 3-1/2″ |
| Coating | Uncoated |
| Number of Teeth | 6 |
| Shank Type | Round |
| Cutting Width (CW) | 0.133″ |
| Flute Type | Helical |
| Angle | 90 Degrees |
| Series/List # | Specialty Profiles |
| Cutting Direction (HAND) | Right Hand |
| Measurement Type | Inch |
| Neck Diameter (DN) | 0.26″ |
$ 156.73
Keyseat Cutter, 1/4″ Dia. × 1/4″ Shank Dia. × 3/64″ CW × 2-1/2″ OAL, 6 Teeth, Carbide, Round Shank, AlTiN, Specialty Profiles
Item #: GE90777147C3
Brand: Harvey Tool
Model #: 777147-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Protruding Length (LPR) | 1/8″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 2-1/2″ |
| Coating | AlTiN |
| Corner Radius (RE) | 0.005″ |
| Shank Type | Round |
| Number of Teeth | 6 |
| Flute Type | Helical |
| Cutting Width (CW) | 3/64″ |
| Series/List # | Specialty Profiles |
| Cutting Direction (HAND) | Right Hand |
| Measurement Type | Inch |
| Neck Diameter (DN) | 5/64″ |
$ 89.63
Keyseat Cutter, 3/32″ Dia. × 1/8″ Shank Dia. × 0.139″ CW × 2-1/2″ OAL, 4 Teeth, 2 Degrees, Carbide, Round Shank, Uncoated, Specialty Profiles
Item #: GE90780393
Brand: Harvey Tool
Model #: 780393
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/32″ |
| Protruding Length (LPR) | 1/2″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 2-1/2″ |
| Coating | Uncoated |
| Corner Radius (RE) | 0.005″ |
| Shank Type | Round |
| Number of Teeth | 4 |
| Flute Type | Helical |
| Cutting Width (CW) | 0.139″ |
| Series/List # | Specialty Profiles |
| Angle | 2 Degrees |
| Cutting Length | 0.139″ |
| Cutting Direction (HAND) | Right Hand |
| Measurement Type | Inch |
| Neck Diameter (DN) | 0.086″ |
$ 59.14
Keyseat Cutter, 3/32″ Dia. × 1/8″ Shank Dia. × 0.139″ CW × 2-1/2″ OAL, 4 Teeth, 4 Degrees, Carbide, Round Shank, AlTiN, Specialty Profiles
Item #: GE90780193C3
Brand: Harvey Tool
Model #: 780193-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/32″ |
| Protruding Length (LPR) | 1/2″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 2-1/2″ |
| Coating | AlTiN |
| Number of Teeth | 4 |
| Shank Type | Round |
| Cutting Width (CW) | 0.139″ |
| Flute Type | Helical |
| Angle | 4 Degrees |
| Series/List # | Specialty Profiles |
| Cutting Direction (HAND) | Right Hand |
| Cutting Length | 0.139″ |
| Neck Diameter (DN) | 0.088″ |
| Measurement Type | Inch |
$ 63.43
Thread Mill; #5 × 3/16″ Shank Dia. × 2″ OAL ; Carbide ; Amorphous Diamond
Item #: GE9041415C4
Brand: Harvey Tool
Model #: 41415-C4
| Product Specifications | |
|---|---|
| Thread Size | #5 |
| Threads per Inch Maximum (TPIX) | 48 |
| Thread Standard | UN |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Flute Type | Spiral |
| Cutting Diameter (DC) | 3/32″ |
| Measurement Type | Inch |
| Functional Length (LF) | 3/8″ |
| Tool Type | Single Form |
| Overall Length (OAL) | 2″ |
| Cutting Direction (HAND) | | Left Hand | Right Hand | |
| Flute Count (NOF) | 4 |
| Body Material | Carbide |
| Shank Type | Round |
| Connection Code Machine Side (CCMS) | Cylindrical |
| Coating | Amorphous Diamond |
| Thread Form Type (THFT) | UN60 |
| Threads per Inch Minimum (TPIN) | 32 |
$ 107.28
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.4083MC
Item #: 96742788
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.4083MC
Product Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00001/-0.00001
Blank Number Wire Size
#2
Inner Diameter (Decimal Inch)
0.4083
Calibrated
Yes
Traceability Certification Included
NIST
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
$ 379.70