Threading > Taps (ET04) - (25001 Products)
Square End Mill; 1/4″ Dia. × 1-1/2″ LOC × 1/4″ Shank Dia. × 4″ OAL, 3 Flutes, Carbide, AlTiN
Item #: TA15TC17416
Brand: Titan USA
Model #: TC17416
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Usable Length (LU) | 1-1/2″ |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.25″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlTiN |
| Center Cutting | Yes |
| Flute Count (NOF) | 3 |
HAL-R-20500
Item #: HS1000465
Brand: Helical Solutions
Model #: 00465
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Length Group | 2.5D |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Decimal Equivalent | 0.5″ |
| Overall Length (OAL) | 3″ |
| Measurement Type | Inch |
| Coating | Uncoated |
| Shank Length (LS) | 1.75″ |
| Flute Count (NOF) | 2 |
1/8″ × 90 Degrees × 1-1/2″ .005TIP Carbide Engraving Cutter TiAlN
Item #: KE11937000099
Brand: Keo
Model #: 937-000-099
| Product Specifications | |
|---|---|
| Angle | 90 Degrees |
| Overall Length (OAL) | 1-1/2″ |
| Coating | AlTiN |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Depth of Cut Maximum (APMX) | 0.06″ |
| Cutting Diameter (DC) | 0.005″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| End Shape | Flat |
HAL-R-20500 ZPLUS COATED
Item #: HS1000467
Brand: Helical Solutions
Model #: 00467
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Length Group | 2.5D |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Decimal Equivalent | 0.5″ |
| Overall Length (OAL) | 3″ |
| Measurement Type | Inch |
| Coating | ZPLUS |
| Shank Length (LS) | 1.75″ |
| Flute Count (NOF) | 2 |
Keyseat Cutter, 1/4″ Dia. × 1/4″ Shank Dia. × 0.167″ CW × 2″ OAL, 4 Teeth, 90 Degrees, Carbide, Round Shank, AlTiN, Specialty Profiles
Item #: GE90759916C3
Brand: Harvey Tool
Model #: 759916-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Protruding Length (LPR) | 5/16″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 2″ |
| Coating | AlTiN |
| Number of Teeth | 4 |
| Shank Type | Round |
| Cutting Width (CW) | 0.167″ |
| Flute Type | Helical |
| Angle | 90 Degrees |
| Series/List # | Specialty Profiles |
| Cutting Direction (HAND) | Right Hand |
| Measurement Type | Inch |
| Neck Diameter (DN) | 0.083″ |
.057-4FL-SE-REG
Item #: MW21250205620
Brand: Monster Tool Company
Model #: 250-205620
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.057″ |
| Applicable Material | | Stainless Steel | Cast Iron | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 0.171″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.057″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
.027-2FL-SE-STUB-AlTiN
Item #: MW21250300320B
Brand: Monster Tool Company
Model #: 250-300320B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.027″ |
| Applicable Material | | Stainless Steel | Cast Iron | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 0.041″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Stub |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.027″ |
| Coating | AlTiN |
| Series/List # | 250 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
Torus End Mill; 0.5 mm Dia. × 0.5 mm LOC × 6 mm Shank Dia. × 57 mm OAL ; 2 FL ; Carbide ; AlTiN ; 0.1 mm R ; Series Hard-Cut
Item #: ER4520722
Brand: EMUGE-FRANKEN
Model #: 2807A.0005
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.5 mm |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Shank Type | Round |
| Depth of Cut Maximum (APMX) | 0.5 mm |
| End Shape | Torus |
| Overall Length (OAL) | 57 mm |
| Applicable Material | | Hard Materials | |
| Cutting Edge Material | Carbide |
| Series/List # | Hard-Cut |
| Coating | AlTiN |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.1 mm |
5/8-11 Dia-H3-4 FL-Bright HSS-Plug Hand Tap
Item #: EK5010113P
Brand: ProCut
Model #: 440-2332
| Product Specifications | |
|---|---|
| Thread Diameter Size (TDZ) | 5/8″ |
| Coating | Bright |
| Threads per Inch (TPI) | 11 |
| Flute Type | Straight |
| Thread Standard | NC |
| End Shape | Chamfer |
| Flute Count (NOF) | 4 |
| Style | Plug |
| Cutting Edge Material | HSS |
| Measurement Type | Inch |
| Thread Tolerance Class (TCTR) | H3 |
| Thread Size | 5/8″ - 11 |
| Tool Type | General Purpose Tap |
5/8-11 Dia-H3-4 FL-Bright HSS-Bottoming Hand Tap
Item #: EK5010113B
Brand: ProCut
Model #: 440-3332
| Product Specifications | |
|---|---|
| Thread Diameter Size (TDZ) | 5/8″ |
| Coating | Bright |
| Threads per Inch (TPI) | 11 |
| Flute Type | Straight |
| Thread Standard | NC |
| End Shape | Chamfer |
| Flute Count (NOF) | 4 |
| Style | Bottoming |
| Cutting Edge Material | HSS |
| Measurement Type | Inch |
| Thread Tolerance Class (TCTR) | H3 |
| Thread Size | 5/8″ - 11 |
| Tool Type | General Purpose Tap |
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.4228MC
Item #: 95276770
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.4228MCProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00001/-0.00001
Blank Number Wire Size
#2
Inner Diameter (Decimal Inch)
0.4228
Calibrated
Yes
Traceability Certification Included
NIST
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
82694 5 FL 12 MM EM TPLUS
Item #: HS1082694
Brand: Helical Solutions
Model #: 82694
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 12 mm |
| Flute Count (NOF) | 5 |
| Connection Diameter Machine Side (DCONMS) | 12 mm |
| Shank Type | N |
| Depth of Cut Maximum (APMX) | 12 mm |
| End Shape | Feed Mill |
| Overall Length (OAL) | 125 mm |
| Applicable Material | | Steel | |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) | 1.508 mm |
| Coating | TPLUS |
| Decimal Equivalent | 0.4724″ |
.040-2FL-SE-STUB
Item #: MW21250300450
Brand: Monster Tool Company
Model #: 250-300450
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.04″ |
| Applicable Material | | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 0.06″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Stub |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.04″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
1/2-13 Dia-H3-4 FL-Bright HSS-Taper Hand Tap
Item #: EK658133T
Brand: Rapidkut
Model #: 008507AS
| Product Specifications | |
|---|---|
| Thread Diameter Size (TDZ) | 1/2″ |
| Coating | Bright |
| Threads per Inch (TPI) | 13 |
| Flute Type | Straight |
| Thread Standard | NC |
| End Shape | Chamfer |
| Flute Count (NOF) | 4 |
| Style | Taper |
| Cutting Edge Material | HSS |
| Measurement Type | Inch |
| Thread Tolerance Class (TCTR) | H3 |
| Thread Size | 1/2″ - 13 |
| Tool Type | General Purpose Tap |
0.006″ Dia. × 0.009″ LOC × 1/8″ Shank Dia. × 1-1/2″ OAL, 2 Flute, Carbide, Amorphous Diamond, Square End Mill
Item #: KE11930001469
Brand: Keo
Model #: 930-001-469
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.006″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 0.009″ |
| Length Group | Stub |
| Overall Length (OAL) | 1-1/2″ |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Amorphous Diamond |
| Center Cutting | Yes |
| Flute Count (NOF) | 2 |
0.016″ Dia. × 0.048″ LOC × 1/8″ Shank Dia. × 1-1/2″ OAL, 4 Flute, Carbide, Amorphous Diamond, Square End Mill
Item #: KE11930000756
Brand: Keo
Model #: 930-000-756
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.016″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 0.048″ |
| Length Group | Standard |
| Overall Length (OAL) | 1-1/2″ |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Amorphous Diamond |
| Center Cutting | Yes |
| Flute Count (NOF) | 4 |
3/4″ Dia. × 1-3/4″ LOC × 3/4″ Shank Dia. × 4″ OAL, 4 Flute, Carbide, AlCrN, Corner Radius End Mill
Item #: KE11976000225
Brand: Keo
Model #: 976-000-225
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-3/4″ |
| Length Group | Standard |
| Overall Length (OAL) | 4″ |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlCrN |
| Center Cutting | Yes |
| Flute Count (NOF) | 4 |
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.1706MC
Item #: 98472020
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.1706MCProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00001/-0.00001
Blank Number Wire Size
#0
Inner Diameter (Decimal Inch)
0.1706
Calibrated
Yes
Traceability Certification Included
NIST
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
0.019″ Dia. × 0.0285″ LOC × 1/8″ Shank Dia. × 1-1/2″ OAL, 4 Flute, Carbide, Square End Mill
Item #: KE11930001631
Brand: Keo
Model #: 930-001-631
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.019″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 0.0285″ |
| Length Group | Stub |
| Overall Length (OAL) | 1-1/2″ |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Center Cutting | Yes |
Brand: Widia / Part #: 5708335
Item #: 97314504
Brand: Widia
Model #: 5708335Product Specifications
Thread Size (mm)
M3x0.5
Chamfer
Plug
Thread Limit
D3
Class Of Fit
6H
Number Of Flutes
3
Material
Powdered Metal
Threads per Inch
51
Thread Direction
Right Hand
Flute Direction
Right Hand
Coating/Finish
Oxide; Nitride
Thread Depth (mm)
19.10
Coolant Through
No
Thread Length (mm)
16.00
Overall Length (mm)
49.3000
Thread Pitch (mm)
0.50
Thread Standard
Metric
Material Grade
WS39MG
Shank Diameter (mm)
3.5800
Square Length (mm)
4.80
Square Size (mm)
2.74
Material Application
High-Temperature Alloy
Series
GT92