Tooling Components & Workholding > Nuts (ET03) - (5184 Products)
0.02″ Dia. × 0.03″ LOC × 1/8″ Shank Size × 2-1/2″ OAL, 3 Flute, Carbide, Amorphous Diamond, Ballnose Endmill
Item #: GE9047920C4
Brand: Harvey Tool
Model #: 47920-C4
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.02″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 0.06″ |
| Depth of Cut Maximum (APMX) | 0.03″ |
| Corner Radius (RE) | 0.01″ |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | 3D |
| Cutting Edge Material | Carbide |
| End Shape | Ball Nose |
| Coating | Amorphous Diamond |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
Brand: Widia / Part #: 2022257
Item #: 94027372
Brand: Widia
Model #: 2022257Product Specifications
Insert Style
CCGT
Insert Shape Code
C
Insert Size Code
21505
Insert Shape
Diamond
Coating/Finish
TiAlN; Al2O3
Manufacturer Grade
HCK10
Corner Radius (Decimal Inch)
0.0079
Insert Material
Carbide
Hole Diameter (Decimal Inch)
0.1102
Maximum Depth of Cut (Decimal Inch)
0.1270
Inscribed Circle (Decimal Inch)
0.2500
Insert Holding Method
Screw
Insert Hand
Neutral
Insert Thickness (Decimal Inch)
0.0938
Clearance Code
C
Tolerance Code
G
Included Angle
80.00
Relief Angle
7.000
Series
CCGT
Coating Process
PVD
Rake
Positive
Wiper Edge
No
Insert Length (Decimal Inch)
0.2539
Number Of Cutting Edges
2
Primary Workpiece Material
Non-Ferrous Metal
Primary Workpiece Material Code
N
Ansi Code
CCGT21505AL3
Iso Code
CCGT060202AL3
Manufacturers Catalog Number
CCGT21505AL3
Cutting Direction
Neutral
Coating Classification
PVD
Chip Breaker
AL3
Style
CCGT
Width (Decimal Inch - 4 Decimals)
0.2500
Multi-Use Tool
Yes
Full Radius
No
Multi-Use Application
External Turning; Internal Turning
HEV-M-50312
Item #: HS1044197
Brand: Helical Solutions
Model #: 44197
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Length Group | 3D |
| Depth of Cut Maximum (APMX) | 1″ |
| Decimal Equivalent | 0.3125″ |
| Overall Length (OAL) | 3″ |
| Measurement Type | Inch |
| Coating | APLUS |
| Shank Length (LS) | 2″ |
| Flute Count (NOF) | 5 |
Engraving Cutter, 45 Degrees × 0.142″ Depth of Cut × 1-1/2″ OAL × 1/8″ Cutting Dia. × 1/8″ Shank Dia., Tip Radius End, AlTiN Nano, Carbide
Item #: GE90825808C6
Brand: Harvey Tool
Model #: 825808-C6
| Product Specifications | |
|---|---|
| Angle | 45 Degrees |
| Tool Type | Engraving Cutter |
| Coating | AlTiN Nano |
| Series/List # | Specialty Profiles |
| Depth of Cut Maximum (APMX) | 0.142″ |
| Cutting Diameter (DC) | 1/8″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| End Shape | Tip Radius |
| Decimal Equivalent | 0.125″ |
| Overall Length (OAL) | 1-1/2″ |
| Point Angle (SIG) | 45 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Single / Double End | Single End |
Corner Radius End Mill; 5/8″ Dia. × 1-1/4″ LOC × 5/8″ Shank Dia. × 3-1/2″ OAL ; 6 FL ; Carbide ; AlCr ; 0.09″ R
Item #: ER473909L062090
Brand: EMUGE-FRANKEN
Model #: 3909L.062090
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Flute Count (NOF) | 6 |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Shank Type | HB |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| End Shape | Corner Radius |
| Overall Length (OAL) | 3-1/2″ |
| Decimal Equivalent | 0.625″ |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.09″ |
| Coating | AlCr |
0.02″ Dia. × 0.03″ LOC × 1/8″ Shank Size × 2-1/2″ OAL, 3 Flute, Carbide, Amorphous Diamond, Ballnose Endmill
Item #: GE90966020C4
Brand: Harvey Tool
Model #: 966020-C4
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.02″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 0.2″ |
| Depth of Cut Maximum (APMX) | 0.03″ |
| Corner Radius (RE) | 0.01″ |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | 10D |
| Cutting Edge Material | Carbide |
| End Shape | Ball Nose |
| Coating | Amorphous Diamond |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
82452 3 FL 3/4 EM ZPLUS
Item #: HS1082452
Brand: Helical Solutions
Model #: 82452
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Flute Count (NOF) | 3 |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Shank Type | N |
| Depth of Cut Maximum (APMX) | 2-3/4″ |
| End Shape | Corner Radius |
| Overall Length (OAL) | 5″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) | 0.01″ |
| Coating | ZPLUS |
| Decimal Equivalent | 0.75″ |
8MMX24MMX75MM 5FL 1MMCR
Item #: HS1059573
Brand: Helical Solutions
Model #: 59573
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 8 mm |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Corner Radius (RE) | 1 mm |
| Depth of Cut Maximum (APMX) | 24 mm |
| Length Group | 3D |
| Overall Length (OAL) | 75 mm |
| Decimal Equivalent | 0.315″ |
| Coating | APLUS |
| Measurement Type | Metric |
| Flute Count (NOF) | 5 |
| Shank Length (LS) | 51 mm |
0.5″ Dia. × 0.5″ Shank × 2″ DOC × 4″ OAL, UN, 3 Flute, Ballnose End Mill
Item #: HS1049315
Brand: Helical Solutions
Model #: 49315
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Length Group | 4D |
| Depth of Cut Maximum (APMX) | 2″ |
| Decimal Equivalent | 0.5″ |
| Overall Length (OAL) | 4″ |
| Measurement Type | Inch |
| Coating | UN |
| Shank Length (LS) | 2″ |
| Flute Count (NOF) | 3 |
0.02″ Dia. × 0.03″ LOC × 1/8″ Shank Size × 2-1/2″ OAL, 4 Flute, Carbide, TiAlN, Ballnose Endmill
Item #: GE90803120C3
Brand: Harvey Tool
Model #: 803120-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.02″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 0.1″ |
| Depth of Cut Maximum (APMX) | 0.03″ |
| Corner Radius (RE) | 0.01″ |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | 5D |
| Cutting Edge Material | Carbide |
| End Shape | Ball Nose |
| Coating | TiAlN |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
3M DENT BALL PMMA/WAX 2FL CRN
Item #: ER4519841
Brand: EMUGE-FRANKEN
Model #: 2608R.300316
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3 mm |
| Application | | Roughing | Finishing | |
| Connection Diameter Machine Side (DCONMS) | 3 mm |
| Tool Type | PMMA/PEEK/Wax |
| Overall Length (OAL) | 38 mm |
| End Shape | Ball Nose |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | CrN |
| Decimal Equivalent | 0.1181″ |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Shank Type | HA |
| Series/List # | 2608R |
| Usable Length (LU) | 2.55 mm |
1/2X1 5/8X4 7FL 0.060CR_A
Item #: HS1081981
Brand: Helical Solutions
Model #: 81981
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Corner Radius (RE) | 0.06″ |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Length Group | 3D |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.5″ |
| Coating | APLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 7 |
| Shank Length (LS) | 2.375″ |
2-25/32″ × 7/16″ × 1″ - HSS- Staggered Tooth Keyseat Cutter - 16T - TiAlN
Item #: KE10952002606
Brand: Keo
Model #: 952-002-606
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 2-25/32″ |
| Coating | TiAlN |
| Cutting Width (CW) | 7/16″ |
| Cutting Direction (HAND) | Neutral |
| Hub Diameter (DHUB) | 1.438″ |
| Cutting Edge Material | HSS |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Flute Type | Staggered |
| Number of Teeth | 16 |
| Measurement Type | Inch |
Brand: Micro 100 / Part #: 40221
Item #: 85903730
Brand: Micro 100
Model #: 40221Product Specifications
Coolant Hose Fitting Type
Plug
Connection Type
Male to Female
System Size
0.750 in
Body Material
Brass
Thread Standard
NPT
Thread Size
3/8-18 NPT
Connection Style
Threaded
0.055″ Dia. × 0.165″ LOC × 1/8″ Shank Dia. × 1-1/2″ OAL, 4 Flute, Carbide, AlTiN, Square End Mill
Item #: KE11930001076
Brand: Keo
Model #: 930-001-076
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.055″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 0.165″ |
| Length Group | Standard |
| Overall Length (OAL) | 1-1/2″ |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlTiN |
| Center Cutting | Yes |
| Flute Count (NOF) | 4 |
Brand: CGW Abrasives / Part #: 43841
Item #: 06622039
Brand: CGW Abrasives
Model #: 43841Product Specifications
Flap Disc Type
Type 27
Disc Diameter (Decimal Inch)
4-1/2 in
Abrasive Type
Coated
Center Hole Size
5/8-11
Grade
Coarse
Grit
40
Maximum Rpm
13300.000
Abrasive Material
Ceramic
Backing Material
Polyester
Attachment Type
Hub
Backing Weight
Y-Weight
Disc Color
Purple
Material Application
weld removal, blending, beveling, finishing, deburring, surface prep
Machine Compatibility
Right Angle Grinder
For Finish
Smooth
Series
eXtreme II
Trimmable
No
Keyseat Cutter, 1/8″ Dia. × 1/8″ Shank Dia. × 0.063″ CW × 1-1/2″ OAL, 6 Teeth, 90 Degrees, Carbide, Round Shank, AlTiN Nano, Specialty Profiles
Item #: GE90838808C6
Brand: Harvey Tool
Model #: 838808-C6
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Protruding Length (LPR) | 3/16″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 1-1/2″ |
| Coating | AlTiN Nano |
| Number of Teeth | 6 |
| Shank Type | Round |
| Cutting Width (CW) | 0.063″ |
| Flute Type | Helical |
| Angle | 90 Degrees |
| Series/List # | Specialty Profiles |
| Cutting Direction (HAND) | Right Hand |
| Measurement Type | Inch |
| Neck Diameter (DN) | 1/16″ |
2-25/32″ × 7/16″ × 1″ - HSS- Staggered Tooth Keyseat Cutter - 16T - TiCN
Item #: KE10952002607
Brand: Keo
Model #: 952-002-607
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 2-25/32″ |
| Coating | TiCN |
| Cutting Width (CW) | 7/16″ |
| Cutting Direction (HAND) | Neutral |
| Hub Diameter (DHUB) | 1.438″ |
| Cutting Edge Material | HSS |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Flute Type | Staggered |
| Number of Teeth | 16 |
| Measurement Type | Inch |
08865 .1000 3FL .015R EM
Item #: DD9008865
Brand: KYOCERA SGS Precision Tools
Model #: 08865
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.1″ |
| Neck Length (LN) | 1.2″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Tool Type | Solid Carbide Endmill |
| Depth of Cut Maximum (APMX) | 0.15″ |
| Length Group | 1.5D |
| Overall Length (OAL) | 2-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | Uncoated |
| Body Material | Carbide |
| Flute Count (NOF) | 3 |
| Series/List # | M3C |
| Flute Helix Angle (FHA) | 30 Degrees |
| Shank Size (SS) | 1/8″ |
| Shank Type | Round |
| Shank Length (LS) | 2.35″ |
| End Shape | Corner Radius |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.015″ |
| Usable Length (LU) | 0.15″ |
| Cutting Direction (HAND) | Right Hand |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | Other Non-Metallic Materials | |
| Single / Double End | Single End |
| Corner Radius (RE) | 0.015″ |
| Center Cutting | Yes |
| Neck Diameter (DN) | 0.071″ |
2-25/32″ × 7/16″ × 1″ - HSS- Staggered Tooth Keyseat Cutter - 16T - TiN
Item #: KE10952002608
Brand: Keo
Model #: 952-002-608
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 2-25/32″ |
| Coating | TiN |
| Cutting Width (CW) | 7/16″ |
| Cutting Direction (HAND) | Neutral |
| Hub Diameter (DHUB) | 1.438″ |
| Cutting Edge Material | HSS |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Flute Type | Staggered |
| Number of Teeth | 16 |
| Measurement Type | Inch |