Tooling Components & Workholding > Nuts (ET03) - (5184 Products)
08865 .1000 3FL .015R EM
Item #: DD9008865
Brand: KYOCERA SGS Precision Tools
Model #: 08865
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.1″ |
| Neck Length (LN) | 1.2″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Tool Type | Solid Carbide Endmill |
| Depth of Cut Maximum (APMX) | 0.15″ |
| Length Group | 1.5D |
| Overall Length (OAL) | 2-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | Uncoated |
| Body Material | Carbide |
| Flute Count (NOF) | 3 |
| Series/List # | M3C |
| Flute Helix Angle (FHA) | 30 Degrees |
| Shank Size (SS) | 1/8″ |
| Shank Type | Round |
| Shank Length (LS) | 2.35″ |
| End Shape | Corner Radius |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.015″ |
| Usable Length (LU) | 0.15″ |
| Cutting Direction (HAND) | Right Hand |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | Other Non-Metallic Materials | |
| Single / Double End | Single End |
| Corner Radius (RE) | 0.015″ |
| Center Cutting | Yes |
| Neck Diameter (DN) | 0.071″ |
Coupling Nut - 3/4″-10 Thread Size
Item #: SG5041507
Brand: Te-Co
Model #: 41507
| Product Specifications | |
|---|---|
| Type | Coupling Nut |
| Overall Length | 1 7/8″ |
| Thread Size | 3/4″-10 |
| Standard Pack | 1 |
| Finish | Black Oxide |
| Material Grade | 12L14 |
| Material | Steel |
| Width Across Flats | 1 1/4″ |
T-Slot Nut - 3/4″-10 Thread Size, 7/8″ Table Slot
Item #: SG5041419
Brand: Te-Co
Model #: 41419
| Product Specifications | |
|---|---|
| Type | Standard T-Slot Nut |
| Base Size | 7/8″ |
| Tap Type | Blind Tapped |
| Overall Length | 1 1/2″ |
| Thread Size | 3/4″-10 |
| Flange Height | 9/16″ |
| Slot Width | 1-1/2″ |
| Table Slot | 7/8″ |
| Overall Height | 1″ |
| Metric Table Slot | 23 mm |
| Material | Case Hardened |
2-25/32″ × 7/16″ × 1″ - HSS- Staggered Tooth Keyseat Cutter - 16T - TiN
Item #: KE10952002608
Brand: Keo
Model #: 952-002-608
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 2-25/32″ |
| Coating | TiN |
| Cutting Width (CW) | 7/16″ |
| Cutting Direction (HAND) | Neutral |
| Hub Diameter (DHUB) | 1.438″ |
| Cutting Edge Material | HSS |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Flute Type | Staggered |
| Number of Teeth | 16 |
| Measurement Type | Inch |
T-Slot Nut - 5/8″-11 Thread Size, 13/16″ Table Slot
Item #: SG5041417
Brand: Te-Co
Model #: 41417
| Product Specifications | |
|---|---|
| Type | Standard T-Slot Nut |
| Base Size | 13/16″ |
| Tap Type | Blind Tapped |
| Overall Length | 1 1/2″ |
| Thread Size | 5/8″-11 |
| Flange Height | 9/16″ |
| Slot Width | 1-1/4″ |
| Table Slot | 13/16″ |
| Overall Height | 1″ |
| Metric Table Slot | 21 mm |
| Material | Case Hardened |
Brand: USA Sealing / Part #: RS-BHS50-935
Item #: 48741763
Brand: USA Sealing
Model #: RS-BHS50-935Product Specifications
Cell Type
Closed
Material
Buna-N
Thickness (mm)
1.0000
Length Type
Standard
Shape
Rectangle
Backing Type
Plain
Width (Inch)
2
Length (Inch)
36
Hardness Rating
Medium
Color
Black
Hardness
Durometer 50A
Surface Texture
Smooth
Minimum Temperature (Deg F - 3 Decimals)
-30.000
Maximum Temperature (F) ( - 0 Decimals)
200.000
Tensile Strength (psi)
1500
Standards
ASTM D2000 BF 510
Durometer Shore A
50A
Density (Lb./Cu. Ft.)
84
Flange Nut - 1″-8 Thread Size
Item #: SG5041609
Brand: Te-Co
Model #: 41609
| Product Specifications | |
|---|---|
| Type | Flange Nut |
| Flange Diameter | 2″ |
| Thread Size | 1″-8 |
| Overall Height | 1 1/4″ |
| Material | Steel |
| Washer Thickness | 1/4″ |
| Material Grade | 12L14 |
| Width Across Flats | 1 5/8″ |
3″ Diameter × 10″ OAL, Nylon, 85 Series-For Closed Holes
Item #: MJ7485N3000
Brand: Brush Research
Model #: 85N3000
| Product Specifications | |
|---|---|
| Type | 85 Series-For Closed Holes |
| Bristle Diameter | 0.025″ |
| Diameter | 3″ |
| Bore Diameter | 3″ |
| Stem Diameter | 0.292″ |
| Maximum RPM | 2,000 |
| Abrasive Material | Nylon |
| Series | 85 Series-For Closed Holes |
| Overall Length | 10″ |
| Brush Diameter | 3″ |
1M DENT BALL ZRO2 2FL DIA
Item #: ER4519772
Brand: EMUGE-FRANKEN
Model #: 2601D.100616
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1 mm |
| Application | | Roughing | Finishing | |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Tool Type | Zirconium / KaVo Everest |
| Overall Length (OAL) | 53 mm |
| End Shape | Ball Nose |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | Diamond - D |
| Decimal Equivalent | 0.0394″ |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Shank Type | HB |
| Series/List # | 2601D |
| Usable Length (LU) | 0.85 mm |
T-Slot Nut - 3/4″-10 Thread Size, 13/16″ Table Slot
Item #: SG5041418
Brand: Te-Co
Model #: 41418
| Product Specifications | |
|---|---|
| Type | Standard T-Slot Nut |
| Base Size | 13/16″ |
| Tap Type | Blind Tapped |
| Overall Length | 1 1/2″ |
| Thread Size | 3/4″-10 |
| Flange Height | 9/16″ |
| Slot Width | 1-1/4″ |
| Table Slot | 13/16″ |
| Overall Height | 1″ |
| Metric Table Slot | 21 mm |
| Material | Case Hardened |
1/8X1/4X1-1/2 3FL_0.010CR
Item #: HS1059000
Brand: Helical Solutions
Model #: 59000
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.01″ |
| Depth of Cut Maximum (APMX) | 1/4″ |
| Length Group | 2D |
| Overall Length (OAL) | 1-1/2″ |
| Decimal Equivalent | 0.125″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 1.25″ |
8 mm Bore Diameter × 2″ Hone Length × 8″ Overall Length, 320 Grit, Silicon Carbide - Chamfer Flex-Hone
Item #: MJ73CHB8M32
Brand: Brush Research
Model #: CHB8M32
| Product Specifications | |
|---|---|
| Type | Chamfer Flex-Hone |
| Hone Length | 2″ |
| Abrasive Material | Silicon Carbide |
| Overall Length | 8″ |
| Grit | 320 |
| Specification | Chamfers 0.016″-0.030″ |
| Bore Diameter | 8 mm |
Flange Nut - 3/4″-10 Thread Size
Item #: SG5041607
Brand: Te-Co
Model #: 41607
| Product Specifications | |
|---|---|
| Type | Flange Nut |
| Flange Diameter | 1 5/8″ |
| Thread Size | 3/4″-10 |
| Overall Height | 1″ |
| Material | Steel |
| Washer Thickness | 1/4″ |
| Material Grade | 12L14 |
| Width Across Flats | 1 1/4″ |
Square End Mill; 3/4″ Dia. × 1-1/2″ LOC × 3/4″ Shank Dia. × 4″ OAL ; 5 FL ; Carbide ; AlCr ; 0.012″ R
Item #: ER472946L0750
Brand: EMUGE-FRANKEN
Model #: 2946L.0750
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Flute Count (NOF) | 5 |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Shank Type | HA |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| End Shape | Square |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.75″ |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.012″ |
| Coating | AlCr |
Heavy Duty Eye Nut - 7/8″-9 Thread, 2 1/4″ Eye Diameter
Item #: SF50EN9
Brand: Generic USA
Model #: SF50EN9
| Product Specifications | |
|---|---|
| Type | Heavy Duty Eye Nut |
| Outside Diameter | 1 9/16″ |
| Thread Size | 7/8″-9 |
| Thread Length | 3″ |
| System of Measurement | Imperial |
| Working Load Limit | 10,000 lbs |
| Inside Diameter | 3″ |
Heavy Duty Eye Nut - 1″-8 Thread, 2 1/4″ Eye Diameter
Item #: SF50EN10
Brand: Generic USA
Model #: SF50EN10
| Product Specifications | |
|---|---|
| Type | Heavy Duty Eye Nut |
| Outside Diameter | 1 9/16″ |
| Thread Size | 1″-8 |
| Thread Length | 3″ |
| System of Measurement | Imperial |
| Working Load Limit | 10,000 lbs |
| Inside Diameter | 3″ |
Heavy Duty Eye Nut - 3/4″-10 Thread, 1 1/2″ Eye Diameter
Item #: SF50EN8
Brand: Generic USA
Model #: SF50EN8
| Product Specifications | |
|---|---|
| Type | Heavy Duty Eye Nut |
| Outside Diameter | 1 3/8″ |
| Thread Size | 3/4″-10 |
| Thread Length | 1 3/4″ |
| System of Measurement | Imperial |
| Working Load Limit | 5,000 lbs |
| Inside Diameter | 1 3/4″ |
Heavy Duty Eye Nut - 3/8″-16 Thread, 1 1/4″ Eye Diameter
Item #: SF50EN3
Brand: Generic USA
Model #: SF50EN3
| Product Specifications | |
|---|---|
| Type | Heavy Duty Eye Nut |
| Outside Diameter | 7/8″ |
| Thread Size | 3/8″-16 |
| Thread Length | 1 1/2″ |
| System of Measurement | Imperial |
| Working Load Limit | 2,700 lbs |
| Inside Diameter | 1 1/4″ |
Heavy Duty Eye Nut - 5/8″-11 Thread, 1 1/2″ Eye Diameter
Item #: SF50EN7
Brand: Generic USA
Model #: SF50EN7
| Product Specifications | |
|---|---|
| Type | Heavy Duty Eye Nut |
| Outside Diameter | 1 3/8″ |
| Thread Size | 5/8″-11 |
| Thread Length | 1 3/4″ |
| System of Measurement | Imperial |
| Working Load Limit | 5,000 lbs |
| Inside Diameter | 1 3/4″ |
Value Collection - Lock Nuts System of Measurement: Inch Type: Hex Lock Nut
Item #: 99483638
Brand: Value Collection
Model #: Features and Benefits
Product Specifications
System of Measurement
Inch
Type
Hex Lock Nut
Material
Steel
Thread Size
1/2-13
Height (Decimal Inch)
0.6094
Material Grade
Grade 2
Finish/Coating
Zinc-Plated
Thread Direction
Right Hand
Locking Style
Insert
Insert Material
Nylon
Width Across Flats (Inch)
3/4
Thread Standard
UNC
Military Specification
Does Not Meet Military Specifications