Tooling Components & Workholding > Threaded Rods & Studs (ET03) - (508 Products)
14″ Bore Diameter × 10″ Hone Length × 34″ Overall Length, 80 Grit, Aluminum Oxide - Heavy Duty Flex-Hone
Item #: MJ73GBD140080AO
Brand: Brush Research
Model #: GBD140080AO
| Product Specifications | |
|---|---|
| Type | Heavy Duty Flex-Hone |
| Hone Length | 10″ |
| Abrasive Material | Aluminum Oxide |
| Overall Length | 34″ |
| Grit | 80 |
| Specification | Non-ferrous Materials |
| Bore Diameter | 14″ |
Brand: PRO-SOURCE / Part #: PSXK017
Item #: 13461009
Brand: PRO-SOURCE
Model #: PSXK017Product Specifications
Chain Size
0.3125 in
Shackle Type
Anchor
Pin Type
Screw
Material
Carbon Steel
Jaw Inside Height
1.2500 in
Inside Width
0.5312
Pin Diameter
0.3750 in
Finish
Galvanized
Maximum Thickness (Inch)
3/4
38831 SETUP STUD 3/4-10
Item #: SG6638831
Brand: Jergens
Model #: 38831
| Product Specifications | |
|---|---|
| Type | Set-Up Stud |
| Overall Length | 8″ |
| System of Measurement | Imperial |
| Material | Stainless Steel |
| Thread Size | 3/4″-10 |
| Thread Length | 2″ |
HAL-C-R-30250-R.020
Item #: HS1029150
Brand: Helical Solutions
Model #: 29150
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Corner Radius (RE) | 0.02″ |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Length Group | 3D |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.25″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 1.75″ |
0.055″ Cutting Dia. × 1/8″ Shank Size × 0.082″ LOC × 2-1/2″ OAL, 3 Flute, Carbide, Uncoated, Square End Mill
Item #: GE90934855
Brand: Harvey Tool
Model #: 934855
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.055″ |
| Usable Length (LU) | 0.385″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Neck Diameter (DN) | 0.0535″ |
| Depth of Cut Maximum (APMX) | 0.082″ |
| Length Group | 7D |
| Overall Length (OAL) | 2-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Size (SS) | 1/8″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
| End Shape | Square |
3/32″ Cutting Dia. × 3/16″ Shank Size × 9/32″ LOC × 2-5/8″ OAL, 4 Flute, HSSCo, Ball Nose End Mill
Item #: KE11934000105
Brand: Keo
Model #: 934-000-105
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/32″ |
| Number of Teeth | 4 |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| End Shape | Ball Nose |
| Depth of Cut Maximum (APMX) | 9/32″ |
| Coolant Supply Property (CSP) | External |
| Overall Length (OAL) | 2-5/8″ |
| Decimal Equivalent | 0.0938″ |
| Cutting Edge Material | HSSCo |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Center Cutting | Yes |
| Corner Radius (RE) | 3/64″ |
| Single / Double End | Single End |
1/2X1X3 7FL 0.060CR APLUS
Item #: HS1081979
Brand: Helical Solutions
Model #: 81979
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Corner Radius (RE) | 0.06″ |
| Depth of Cut Maximum (APMX) | 1″ |
| Length Group | 2D |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.5″ |
| Coating | APLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 7 |
| Shank Length (LS) | 2″ |
14″ Bore Diameter × 10″ Hone Length × 34″ Overall Length, 800 Grit, Aluminum Oxide - Heavy Duty Flex-Hone
Item #: MJ73GBD1400800A
Brand: Brush Research
Model #: GBD1400800AO
| Product Specifications | |
|---|---|
| Type | Heavy Duty Flex-Hone |
| Hone Length | 10″ |
| Abrasive Material | Aluminum Oxide |
| Overall Length | 34″ |
| Grit | 800 |
| Specification | Non-ferrous Materials |
| Bore Diameter | 14″ |
Brand: Fairbanks / Part #: 4 AXLE KIT
Item #: 02952810
Brand: Fairbanks
Model #: 4 AXLE KITProduct Specifications
Accessory Type
Axle Kit
For Use With
Fairbanks - Casters
M21x1 - 4h Ring Gage - No-Go
Item #: ER45L3005100428
Brand: EMUGE-FRANKEN
Model #: L0300510.0428
| Product Specifications | |
|---|---|
| Type | Thread Ring Gage |
| Thread Type | Metric |
| Go / No Go | No-Go |
| Certification | Short form certification included |
| Thread Size | M21x1 |
| Pitch | 1 |
| Classification | 4H |
| Dimension Standards | DIN ISO 1602 |
38829 SETUP STUD 3/4-10
Item #: SG6638829
Brand: Jergens
Model #: 38829
| Product Specifications | |
|---|---|
| Type | Set-Up Stud |
| Overall Length | 7″ |
| System of Measurement | Imperial |
| Material | Stainless Steel |
| Thread Size | 3/4″-10 |
| Thread Length | 2″ |
38621 SETUP STUD 5/8-11
Item #: SG6638621
Brand: Jergens
Model #: 38621
| Product Specifications | |
|---|---|
| Type | Set-Up Stud |
| Overall Length | 3″ |
| System of Measurement | Imperial |
| Material | Stainless Steel |
| Thread Size | 5/8″-11 |
| Thread Length | 1 3/8″ |
38435 SETUP STUD 1/2-13
Item #: SG6638435
Brand: Jergens
Model #: 38435
| Product Specifications | |
|---|---|
| Type | Set-Up Stud |
| Overall Length | 10″ |
| System of Measurement | Imperial |
| Material | Stainless Steel |
| Thread Size | 1/2″-13 |
| Thread Length | 1 1/2″ |
Square End Mill; 10 mm Dia. × 22 mm LOC × 10 mm Shank Dia. × 72 mm OAL ; 5 FL ; Carbide ; AlCr ; Series 2531L
Item #: ER452531L010
Brand: EMUGE-FRANKEN
Model #: 2531L.010
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 10 mm |
| End Shape | Square |
| Connection Diameter Machine Side (DCONMS) | 10 mm |
| Application | | Roughing | Finishing | |
| Depth of Cut Maximum (APMX) | 22 mm |
| Tool Type | Jet-Cut 2xD |
| Overall Length (OAL) | 72 mm |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.3937″ |
| Coating | AlCr |
| Measurement Type | Metric |
| Flute Count (NOF) | 5 |
| Series/List # | 2531L |
| Shank Type | HB |
38178 STUD M10 × 155 AL
Item #: SG6638178
Brand: Jergens
Model #: 38178
| Product Specifications | |
|---|---|
| Type | Alloy Steel Stud |
| Overall Length | 155 mm |
| System of Measurement | Metric |
| Material | Stainless Steel |
| Thread Size | M10-1.50 |
| Thread Length | 39 mm |
38177 STUD M10 × 140 AL
Item #: SG6638177
Brand: Jergens
Model #: 38177
| Product Specifications | |
|---|---|
| Type | Alloy Steel Stud |
| Overall Length | 140 mm |
| System of Measurement | Metric |
| Material | Stainless Steel |
| Thread Size | M10-1.50 |
| Thread Length | 39 mm |
Brand: Euri Lighting / Part #: EP16-4020EW
Item #: 18335935
Brand: Euri Lighting
Model #: EP16-4020EWProduct Specifications
Lamp Style
Commercial; Industrial
Lamp Type
PAR16
Lamp Technology
LED
Base Style
Twist
Lumens
450
Lamps Style
Commercial/Industrial
Wattage Equivalent Range
50 to 749
Overall Length (Inch)
2.05
Overall Length
2.0500 in
Actual Wattage
7.00
Color Temperature Range
Warm (1000 to 2999)
Wattage
7
Color Rendering Index
90
Beam Angle
40
Dimmability
Dimmable
Shatter Resistance
NonShatter Resistant
Base Code
GU10
Wattage Equivalent
50
Average Life Hours
25000
Clamping Stud for T-Slot Work - 7/8″-9 Thread Size, 3″ Overall Length
Item #: SG5041001
Brand: Te-Co
Model #: 41001
| Product Specifications | |
|---|---|
| Type | Clamping Stud |
| Thread Length B | 1″ |
| System of Measurement | Imperial |
| Overall Length | 3″ |
| Material | Medium Carbon Steel |
| Thread Length A | 1″ |
| Finish | Black Oxide |
| Tensile Strength | 125,000 psi |
| Thread Size | 7/8″-9 |
Brand: Made in USA / Part #: 4031M07F16
Item #: 00662882
Brand: Made in USA
Model #: 4031M07F16Product Specifications
Drive Type
Slotted
Thread Size
#10-32
Material
Stainless Steel
Material Grade
18-8
Finish
Uncoated
Head Diameter
0.3750 in; 3/8 in
Head Height
0.4370 in
Thread Standard
UNF
Standards
QQ-S-763
38775 STUD M20 × 150 AL
Item #: SG6638775
Brand: Jergens
Model #: 38775
| Product Specifications | |
|---|---|
| Type | Alloy Steel Stud |
| Overall Length | 151 mm |
| System of Measurement | Metric |
| Material | Stainless Steel |
| Thread Size | M20-2.50 |
| Thread Length | 48 mm |