Workholding - Clamping & Fixturing - Flat Stock & Shims - Flat Stock - (3616 Products)
3/32 x 1 x 36 - A6 Air Hardening Precision Ground Flat Stock
Item #: LY4458932
Manufacturer: Starrett
Mfg #: 58932
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-6
*Thick: 3/32
*Width: 1
Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance
*Lower heat treating temperature results in deep hardness and minimum distortion
Shipping Info:
*Actual Weight - .9600
7/8 x 3 x 18 - Oversize Air Hardening Flat Stock
Item #: LY4657641
Manufacturer: Starrett
Mfg #: 57641
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 7/8
*Width: 3
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 13.3900
1-1/2 x 2-1/2 x 36 - Air Hardening Flat Stock
Item #: LY4557695
Manufacturer: Starrett
Mfg #: 57695
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 1-1/2
*Width: 2-1/2
Description:
*497 is a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Standard size: +/-.001" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*Ground straight and parallel
Shipping Info:
*Actual Weight - 38.2500
18 x 5/32 x 4 - Oversize Air Hardening Flat Stock
Item #: LY701012
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: A-2
*Thick: 5/32
*Width: 4
Description:
*Oversize A-2 Air Hardening Ground Flat Stock
Shipping Info:
*Actual Weight - 3.4900
36 x 1/8 x 6 - Oversize Air Hardening Flat Stock
Item #: LY75816
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: A-2
*Thick: 1/8
*Width: 6
Description:
*Oversize A-2 Air Hardening Ground Flat Stock
Shipping Info:
*Actual Weight - 8.5200
36 x 5/8 x 1-1/2 - Oil Hardening Flat Stock
Item #: LY4054465
Manufacturer: Starrett
Mfg #: 54465
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 5/8
*Width: 1-1/2
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 9.6800
7/8 x 4 x 36 - Air Hardening Flat Stock
Item #: LY4554700
Manufacturer: Starrett
Mfg #: 54700
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 7/8
*Width: 4
Description:
*497 is a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Standard size: +/-.001" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*Ground straight and parallel
Shipping Info:
*Actual Weight - 35.7000
36 x 1-1/8 x 6 - Oil Hardening Flat Stock
Item #: LY4054518
Manufacturer: Starrett
Mfg #: 54518
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 1-1/8
*Width: 6
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 69.5900
3/16 x 3-1/2 x 36 - A6 Air Hardening Precision Ground Flat Stock
Item #: LY4458980
Manufacturer: Starrett
Mfg #: 58980
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-6
*Thick: 3/16
*Width: 3-1/2
Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance
*Lower heat treating temperature results in deep hardness and minimum distortion
Shipping Info:
*Actual Weight - 6.6900
3/8 x 3 x 36 - High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4269316
Manufacturer: Starrett
Mfg #: 69316
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: D-2
*Thick: 3/8
*Width: 3
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - 11.4700
1-1/2 x 6 x 24 - 498 Low Carbon Precision Ground Flat Stock
Item #: LY8055073
Manufacturer: Starrett
Mfg #: 55073
Technical Specifications:
*Brand Name: Starrett
*Length: 24
*Material: LC
*Thick: 1-1/2
*Width: 6
Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost
* Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
*This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
*Furnished in 24" (610mm) lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 61.1900
1/4 x 7 x 36 - A6 Air Hardening Precision Ground Flat Stock
Item #: LY4459006
Manufacturer: Starrett
Mfg #: 59006
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-6
*Thick: 1/4
*Width: 7
Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance
*Lower heat treating temperature results in deep hardness and minimum distortion
Shipping Info:
*Actual Weight - 17.8500
2 x 2 x 18 - Air Hardening Flat Stock
Item #: LY4554853
Manufacturer: Starrett
Mfg #: 54853
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 2
*Width: 2
Description:
*497 is a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Standard size: +/-.001" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*Ground straight and parallel
Shipping Info:
*Actual Weight - 20.4000
36 x 3/16 x 1 - Oversize Oil Hardening Flat Stock
Item #: LY651204
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 3/16
*Width: 1
Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock
*Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis
*Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools
*Width +.010/.015
*Thickness +10.010/.015
*Squareness edge to surface .003 per inch of thickness
*Finish 10-25 micro inches
Shipping Info:
*Actual Weight - 2.2000
1/2 x 5 x 18 - Oversize High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4369442
Manufacturer: Starrett
Mfg #: 69442
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: D-2
*Thick: 1/2
*Width: 5
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - 12.7500
36 x 1/2 x 5 - Oil Hardening Flat Stock
Item #: LY5103213
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 1/2
*Width: 5
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 26.1000
24 x 1/4 x 3-1/2 - Low Carbon Flat Stock
Item #: LY8000293
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 24
*Material: Low Carbon
*Thick: 1/4
*Width: 3-1/2
Description:
*Low-Carbon 24" Length Ground Flat Stock
*A fine-grained, vacuum-degassed carbon steel
*Easily machined, has excellent weldability and responds uniformly to case hardening
*Manganese content provides greater strength and hardness compared to many other carbon steels
*Often used in its natural state for such applications as backup plate, stripper plates, punch pads and machine parts
*Used for jigs, fixtures, cams and patterns
*Hardening: CARBURIZING: For maximum depth of hardening, 1/21", hold in carburizing salt at 1700?F for 3 hours. CASE HARDENING: Hold in sodium cyanide salt bath at 1500?F for 30 minutes. Maximum case is .006"
Shipping Info:
*Actual Weight - 6.0200
1/4 x 6 x 36 - Oversize High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4369524
Manufacturer: Starrett
Mfg #: 69524
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: D-2
*Thick: 1/4
*Width: 6
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - 15.3000
36 x 5/16 x 6 - Oversize Oil Hardening Flat Stock
Item #: LY4156845
Manufacturer: Starrett
Mfg #: 56845
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 5/16
*Width: 6
Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock
*Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis
*Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools
*Width +.010/.015
*Thickness +10.010/.015
*Squareness edge to surface .003 per inch of thickness
*Finish 10-25 micro inches
Shipping Info:
*Actual Weight - 20.1400
36 x 7/8 x 1-1/2 - Oil Hardening Flat Stock
Item #: LY4054494
Manufacturer: Starrett
Mfg #: 54494
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 7/8
*Width: 1-1/2
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 13.5500