Workholding - Clamping & Fixturing - Flat Stock & Shims - Flat Stock - (3616 Products)
18 x 5/32 x 5 - Oil Hardening Flat Stock
Item #: LY4054039
Manufacturer: Starrett
Mfg #: 54039
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: O-1
*Thick: 5/32
*Width: 5
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 4.0300
1X3-1/2X24 CARBON FLAT STOCK
Item #: LY8003300
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
Description:
Shipping Info:
*Actual Weight - 24.0900
1 x 2-1/2 x 18 - Air Hardening Flat Stock
Item #: LY4554789
Manufacturer: Starrett
Mfg #: 54789
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 1
*Width: 2-1/2
Description:
*497 is a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Standard size: +/-.001" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*Ground straight and parallel
Shipping Info:
*Actual Weight - 12.7500
18 x 1/2 x 2 - Oil Hardening Flat Stock
Item #: LY4054153
Manufacturer: Starrett
Mfg #: 54153
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: O-1
*Thick: 1/2
*Width: 2
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 5.1600
1 x 2 x 18 - High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4269226
Manufacturer: Starrett
Mfg #: 69226
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: D-2
*Thick: 1
*Width: 2
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - 10.2000
18 x 5/32 x 3 - Oil Hardening Flat Stock
Item #: LY4054036
Manufacturer: Starrett
Mfg #: 54036
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: O-1
*Thick: 5/32
*Width: 3
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 2.4200
18 x 1/8 x 1-1/4 - Air Hardening Flat Stock
Item #: LY55806
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: A-2
*Thick: 1/8
*Width: 1-1/4
Description:
*A-2 Air Hardening Ground Flat Stock 18" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - .8100
1/16 x 3/4 x 36 - A6 Air Hardening Precision Ground Flat Stock
Item #: LY4458912
Manufacturer: Starrett
Mfg #: 58912
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-6
*Thick: 1/16
*Width: 3/4
Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance
*Lower heat treating temperature results in deep hardness and minimum distortion
Shipping Info:
*Actual Weight - .4800
18 x 3/8 x 1/2 - Air Hardening Flat Stock
Item #: LY4557532
Manufacturer: Starrett
Mfg #: 57532
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 3/8
*Width: 1/2
Description:
*A-2 Air Hardening Ground Flat Stock 18" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - .9700
1 x 4-1/2 x 36 - Oversize Air Hardening Flat Stock
Item #: LY4657463
Manufacturer: Starrett
Mfg #: 57463
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 1
*Width: 4-1/2
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 45.8900
24 x 1/8 x 1-1/4 - Low Carbon Flat Stock
Item #: LY8000446
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 24
*Material: Low Carbon
*Thick: 1/8
*Width: 1-1/4
Description:
*Low-Carbon 24" Length Ground Flat Stock
*A fine-grained, vacuum-degassed carbon steel
*Easily machined, has excellent weldability and responds uniformly to case hardening
*Manganese content provides greater strength and hardness compared to many other carbon steels
*Often used in its natural state for such applications as backup plate, stripper plates, punch pads and machine parts
*Used for jigs, fixtures, cams and patterns
*Hardening: CARBURIZING: For maximum depth of hardening, 1/21", hold in carburizing salt at 1700?F for 3 hours. CASE HARDENING: Hold in sodium cyanide salt bath at 1500?F for 30 minutes. Maximum case is .006"
Shipping Info:
*Actual Weight - 1.0800
3/16 x 1-1/4 x 36 - Oversize High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4369506
Manufacturer: Starrett
Mfg #: 69506
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: D-2
*Thick: 3/16
*Width: 1-1/4
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - 2.3900
18 x 9/64 x 4 - Oil Hardening Flat Stock
Item #: LY4054026
Manufacturer: Starrett
Mfg #: 54026
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: O-1
*Thick: 9/64
*Width: 4
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 2.9000
18 x 3/8 x 1-1/2 - Oversize Air Hardening Flat Stock
Item #: LY702406
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: A-2
*Thick: 3/8
*Width: 1-1/2
Description:
*Oversize A-2 Air Hardening Ground Flat Stock
Shipping Info:
*Actual Weight - 3.0200
18 x 5/16 x 1-1/4 - Oil Hardening Flat Stock
Item #: LY4054105
Manufacturer: Starrett
Mfg #: 54105
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: O-1
*Thick: 5/16
*Width: 1-1/4
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 2.0200
5/16 x 1-3/4 x 36 - A6 Air Hardening Precision Ground Flat Stock
Item #: LY4459019
Manufacturer: Starrett
Mfg #: 59019
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-6
*Thick: 5/16
*Width: 1-3/4
Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance
*Lower heat treating temperature results in deep hardness and minimum distortion
Shipping Info:
*Actual Weight - 5.5800
36 x 1/4 x 14 - Oil Hardening Flat Stock
Item #: LY4057239
Manufacturer: Starrett
Mfg #: 57239
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 1/4
*Width: 14
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 36.0700
5/8 x 6 x 36 - Oversize Air Hardening Flat Stock
Item #: LY4657434
Manufacturer: Starrett
Mfg #: 57434
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 5/8
*Width: 6
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 38.2500
1/4 x 1/4 x 36 - A6 Air Hardening Precision Ground Flat Stock
Item #: LY4458988
Manufacturer: Starrett
Mfg #: 58988
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-6
*Thick: 1/4
*Width: 1/4
Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance
*Lower heat treating temperature results in deep hardness and minimum distortion
Shipping Info:
*Actual Weight - .6400
18 x 1/8 x 5 - Oversize Air Hardening Flat Stock
Item #: LY4657553
Manufacturer: Starrett
Mfg #: 57553
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 1/8
*Width: 5
Description:
*A-2 Air Hardening Ground Flat Stock 18" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - 3.5500