Workholding & Toolholding Products For Sale | Exact Tooling - (25001 Products)
4" Round Rare Earth Magnetic Chuck Fine Pole
Item #: HM50MRRE10FP
Manufacturer: Suburban
Mfg #: MRRE-10-FP
Technical Specifications:
*Bolt Center Distance: 3.35
*Bolt Size: (3) M6
*Brand Name: Suburban
*Height: 1.69
*Pole: Fine
*Pole Spacing: .02
*Shape: Round
*Size: 4
*Weight: 10 lbs
Description:
*Round Rare Earth Magnetics Chuck
*Features:
*Made with neodymium iron boron tupe rare earth magnets for exceptonal holding power
*80 N/cm2 (116 psi) nominal holding power
*Fine Pole:
*Suitable for grinding & EDM
*Works bes for holding smaller & thinner workpieces
*Has 1.5mm steel poles & 0.5mm brass spacers
Shipping Info:
*Actual Weight - 8.0000
*Dimensions - Height: 5.00 Length: 9.00 Width: 9.00
Square End Mill; 0.008″ Dia. × 0.024″ LOC × 1/8″ Shank Dia. × 1-1/2″ OAL, 2 Flutes, Carbide, AlTiN
Item #: TA15TC56208
Brand: Titan USA
Model #: TC56208
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.008″ |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 0.024″ |
| End Shape | Square |
| Overall Length (OAL) | 1-1/2″ |
| Usable Length (LU) | 0.024″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlTiN |
| Center Cutting | Yes |
#45025 - Locating Pins (1 Taper & 1 Diamond) for VM100 &VM300 Vacmagic®
Item #: SG7045025
Manufacturer: Mitee-Bite
Mfg #: 45025
Technical Specifications:
*Brand Name: Mitee-Bite
Description:
*Replacement Parts for VM100 & VM300 Vacmagic®
Shipping Info:
*Actual Weight - .9900
EEPM-C4-QF CONNECTER FEMALE
Item #: TE13EEPMC4QF
Manufacturer:
Mfg #:
Technical Specifications:
Description:
Shipping Info:
*Actual Weight - 28.9999
CONNECTION CABLE FOR EEPM-C
Item #: TE13EEPMCC05
Manufacturer:
Mfg #:
Technical Specifications:
Description:
Shipping Info:
*Actual Weight - 10.9999
LPTS SWITCH FOR VACMAGIC
Item #: SG7045035
Manufacturer: Mitee-Bite
Mfg #: 45035
Technical Specifications:
Description:
*Replacement Parts for VM100 & VM300 Vacmagic®
Shipping Info:
*Actual Weight - 1.0000
ELECTRO-PERM 250 X 400MM 18 POLE
Item #: TE10EEPM2540W22
Manufacturer:
Mfg #:
Technical Specifications:
Description:
Shipping Info:
SUPPLY VALVE FOR VACMAGIC
Item #: SG7045050
Manufacturer: Mitee-Bite
Mfg #: 45050
Technical Specifications:
Description:
*Replacement Parts for VM100 & VM300 Vacmagic®
Shipping Info:
*Actual Weight - 1.0000
LOW VACUUM INDICATOR W/SPRING
Item #: SG7045030
Manufacturer: Mitee-Bite
Mfg #: 45030
Technical Specifications:
Description:
*Replacement Parts for VM100 & VM300 Vacmagic®
Shipping Info:
*Actual Weight - 1.0000
EEPM-C4-QM-1 EARTH CHAIN MAGNET
Item #: TE13EEPMC4QM1
Manufacturer:
Mfg #:
Technical Specifications:
Description:
Shipping Info:
*Actual Weight - 30.9999
#45040 - Low Pressure Trip Switch Assembly VM100 &VM300 Vacmagic®
Item #: SG7045040
Manufacturer: Mitee-Bite
Mfg #: 45040
Technical Specifications:
*Brand Name: Mitee-Bite
Description:
*Replacement Parts for VM100 & VM300 Vacmagic®
Shipping Info:
*Actual Weight - .9900
EEPM-C4-QM MALE CONNECTOR
Item #: TE13EEPMC4QM
Manufacturer:
Mfg #:
Technical Specifications:
Description:
Shipping Info:
*Actual Weight - 29.9999
Standard Pole Magnetic Chuck - 8" x 24"
Item #: HM50MCB824
Manufacturer: Suburban
Mfg #: MCB-824
Technical Specifications:
*Brand Name: Suburban
*Hazard Code: HAZ05
*Height: 2-5/8
*Pole: Standard
*Pole Spacing: 3/8
*Shape: Rectangular
*Size: 8 x 24
*Weight: 116 lbs
Description:
*Rectangular Magnetic Chuck
*Ceramic magnets provide superior holding power that never fades
*Sealed against dirt and liquids, and can also be used in EDM machines
*Front mounted handle is removable to eliminate interference
*Handle, back rail, side rail and two clamps included
*Overall height is 2-5/8"
Shipping Info:
*Commercial Truck - Call for Shipping Charges
*Actual Weight - 116.0000
*Dimensions - Height: 9.00 Length: 31.0 Width: 17.0
6 x 12" NEO Micro2 Chuck
Item #: HM55NM612
Manufacturer: O.S. Walker
Mfg #: B11.815.30
Technical Specifications:
*Brand Name: O.S. Walker
*Hazard Code: HAZ05
*Height: 2
*Size: 6 x 12
*Weight: 40 lbs
Description:
*NEOMicro2 Chucks
*Super accurate
*Loaded with Rare Earth Neodymium magnet material
*Micro fine top plate with .02" brass gaps and .05" steel poles
*Maxiumum workholding surface 100% active with no weak areas
*Ideal for very thin and small components
*Low profile
*One back rest and one end stop
Shipping Info:
*HAZ 05
*UPS Ground - No Additional Shipping Charges
*UPS Air - Cannot Ship Air
*Commercial Truck - Call for Shipping Charges
*Note: The additional charges are controlled by UPS and are subject to change.
*Actual Weight - 40.0000
8 x 18" NEO Micro2 Chuck
Item #: HM55NM818
Manufacturer: O.S. Walker
Mfg #: B11.820.45
Technical Specifications:
*Brand Name: O.S. Walker
*Height: 2
*Size: 8 x 18
*Weight: 82 lbs
Description:
*NEOMicro2 Chucks
*Super accurate
*Loaded with Rare Earth Neodymium magnet material
*Micro fine top plate with .02" brass gaps and .05" steel poles
*Maxiumum workholding surface 100% active with no weak areas
*Ideal for very thin and small components
*Low profile
*One back rest and one end stop
Shipping Info:
*Actual Weight - 82.0000
*Addl Fee Over 70lb - $19.00 per item
Electromagnetic Chuck with Longitudinal Poles - #EMCB815L; 8'' x 15''
Item #: NJ50EMCB815L
Manufacturer: Suburban
Mfg #: EMCB815L
Technical Specifications:
*Brand Name: Suburban
*Height: 3-1/4
*Pole: Longitudinal
*Size: 8 x 15
*Watts: 85
*Weight: 132 lbs
Description:
*Electromagnetic Chucks
*Transverse Pole Chucks - Poles Run Side to Side
*Longitudinal Pole Chucks - Poles Run End to End
*Top plate has 1/8" steel poles and 1/16" stainless steel separators
*Chucks are sealed against dirt and liquids
*Longitudinal (lengthwise) or transverse (crosswise) pole models available
*Two clamps, back rail and side rail included
*Chuck controls must be used with all electromagnetic chucks!
Shipping Info:
*Actual Weight - 132.0000
*Dimensions - Height: 12.0 Length: 20.0 Width: 16.0
*Addl Fee Over 70lb - $19.00 per item
Standard Pole Magnetic Chuck - 4" x 7"
Item #: HM50MCB47
Manufacturer: Suburban
Mfg #: MCB-47
Technical Specifications:
*Brand Name: Suburban
*Height: 2-5/8
*Pole: Standard
*Pole Spacing: 3/8
*Shape: Rectangular
*Size: 4 x 7
*Weight: 16 lbs
Description:
*Rectangular Magnetic Chuck
*Ceramic magnets provide superior holding power that never fades
*Sealed against dirt and liquids, and can also be used in EDM machines
*Front mounted handle is removable to eliminate interference
*Handle, back rail, side rail and two clamps included
*Overall height is 2-5/8"
Shipping Info:
*HAZ 5C
*UPS Ground - No Additional Shipping Charges
*UPS Air - Cannot Ship Air
*Commercial Truck - Call for Shipping Charges
*Note: The additional charges are controlled by UPS and are subject to change.
*Actual Weight - 16.0000
*Dimensions - Height: 7.00 Length: 9.00 Width: 9.00
*Additional handling - $15.00 per item
MTEC 2020F41 2.0ISO AC22
Item #: FG335603860
Brand: ToolFlo
Model #: 1271220
| Product Specifications | |
|---|---|
| Thread Pitch (TP) | 2 mm |
| Flute Helix Angle (FHA) | 15 Degrees |
| Connection Diameter Machine Side (DCONMS) | 20 mm |
| Cutting Edge Material | Carbide |
| Cutting Diameter (DC) | 20 mm |
| Cutting Position | INT |
| Overall Length (OAL) | 105 mm |
| Measurement Type | Metric |
| Flute Count (NOF) | 6 |
| Grade | AC22 |
| Shank Type | Round |
| Depth of Cut Maximum (APMX) | 41 mm |
| Coating | TiAlN |
| Body Material | Carbide |
| Application | | Internal Thread Milling | |
| Connection Code Machine Side (CCMS) | Cylindrical |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Thread Form Type (THFT) | M60 |
8 x 24" NEO Micro2 Chuck
Item #: HM55NM824
Manufacturer: O.S. Walker
Mfg #: B11.820.60
Technical Specifications:
*Brand Name: O.S. Walker
*Height: 2
*Size: 8 x 24
*Weight: 108 lbs
Description:
*NEOMicro2 Chucks
*Super accurate
*Loaded with Rare Earth Neodymium magnet material
*Micro fine top plate with .02" brass gaps and .05" steel poles
*Maxiumum workholding surface 100% active with no weak areas
*Ideal for very thin and small components
*Low profile
*One back rest and one end stop
Shipping Info:
*Actual Weight - 108.0000
*Addl Fee Over 70lb - $19.00 per item
Magnum-Force Permanent Magnetic Chuck - 6" x 18"
Item #: HM50DMB618
Manufacturer: Suburban
Mfg #: DMB-618
Technical Specifications:
*Brand Name: Suburban
*Height: 2-1/2
*Pole: Standard
*Pole Spacing: 1/8 & 1/4
*Shape: Rectangular
*Size: 6 x 18
*Weight: 65 lbs
Description:
*Magnum-Force™ Permanent Magnetic Chuck
*Dual magnets provide 120% more power
*Submersible for use in EDM and fluids
*Clamps included
*1/16" Stainless dividers with1/8" minor pole and 1/4" major pole
Shipping Info:
*HAZ 5C
*UPS Ground - No Additional Shipping Charges
*UPS Air - Cannot Ship Air
*Commercial Truck - Call for Shipping Charges
*Note: The additional charges are controlled by UPS and are subject to change.
*Actual Weight - 66.0000
*Dimensions - Height: 13.0 Length: 23.0 Width: 13.0
*Additional handling - $15.00 per item