BT40 1/4 SHRINK FIT HOLDER

Item #: GM76SF0250256RT
Manufacturer: Lyndex
Mfg #: BT40-SF025

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$ 227.39

HSKA125 32MMX200MM HD SHRINKFIT CHK

Item #: HA71A1251563267
Manufacturer: Haimer USA LLC
Mfg #: A125.156.3

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - 23.8612

$ 3,074.40

Power Clamp Premium SYSTEM CART

Item #: HA728012420
Manufacturer: Haimer USA LLC
Mfg #: 80.124.20

Technical Specifications:
*Brand Name: Haimer USA LLC *Model Number: 80.124.20 *Type: Power Clamp

Description:

Shipping Info:

$ 2,678.75

C6 10MMX130MM GL SHRINK FIT CHK

Item #: HA71CC614410
Manufacturer: Haimer USA LLC
Mfg #: CC6.144.10

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - 2.8864

$ 1,000.33

CS12-1/8-110

Item #: TP349910077
Manufacturer: OSG USA, Inc.
Mfg #: 9910077

Technical Specifications:
*Brand Name: OSG USA, Inc. *List No.: SHRINK

Description:

Shipping Info:
*Actual Weight - .5350 *Dimensions - Height: 1.15 Length: 6.20 Width: 1.25

$ 556.21

BT40 3/8X6.30" GL SHRINK FIT CHUCK

Item #: HA714064238Z4
Manufacturer: Haimer USA LLC
Mfg #: 40.642.3/8

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - 4.8180

$ 505.77

HSK63 6mm x 130mm - Shrink Fit Tool Holder

Item #: GM94H63M061309
Manufacturer: Parlec
Mfg #: H63A-M06SF

Technical Specifications:
*Bore Diameter: 6mm *Brand Name: Parlec *Gage Length: 130mm *Model Number: H63A-M06SF130-9 *Shank: HSK63A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 3.0000

$ 348.74

HSK-E40 3MMX70MM GL MINI SHRINK CHK

Item #: HA71E4018003
Manufacturer: Haimer USA LLC
Mfg #: E40.180.03

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .8800

$ 497.61

HSKA125 16MMX160MM HD SHRINKFIT CHK

Item #: HA71A1251521667
Manufacturer: Haimer USA LLC
Mfg #: A125.152.1

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - 16.8432

$ 2,867.40

CAT40 1 x 3.15 Shrink Fit Chuck

Item #: HA71408401Z4
Manufacturer: Haimer USA LLC
Mfg #: 40.840.1Z.

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Haimer USA LLC *Gage Length: 3.94 *Model Number: 40.840.1Z.4 *Outside Diameter: 2.09 *Shank: CAT40 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 3.0000

$ 360.97

CS12-7-110

Item #: TP348910093
Manufacturer: OSG USA, Inc.
Mfg #: 8910093

Technical Specifications:
*Brand Name: OSG USA, Inc. *List No.: SHRINK

Description:

Shipping Info:
*Actual Weight - .6100 *Dimensions - Height: 1.20 Length: 6.15 Width: 1.30

$ 392.81

CAT50 1/2 x 3.15 Power Shrink Fit Chuck

Item #: HA715084012Z36
Manufacturer: Haimer USA LLC
Mfg #: 50.840.1/2

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Haimer USA LLC *Gage Length: 3.15 *Model Number: 50.840.1/2Z.36 *Outside Diameter: 1.26 *Shank: CAT50 *Type: Power Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all inductive shrink fit units *Precesion AT3 Tolerance Shank *Balanced to G2.5 at 25,000 RPM or U < 1 gmm *Taper tolerance AT3 *High runout accuracy < 3µ¼m *Low tendency towards vibrationos by optimized outer geometry *Slim desgin at the top *Very rigid shank *Dirt groove in the clamping bore for safe clamping force *Coolant supply fromr ADB *Cool Jet, can be sealed *Made in Germany

Shipping Info:
*Actual Weight - 8.0000

$ 1,203.25

HSK A 100 SRKIN 3/4X6-1/4

Item #: TG604504369
Manufacturer: Tungaloy
Mfg #: 4504369

Technical Specifications:
*Brand Name: Tungaloy

Description:

Shipping Info:
*Actual Weight - .0090

$ 802.23

E32-SLRA3-70

Item #: TP349911017
Manufacturer: OSG USA, Inc.
Mfg #: 9911017

Technical Specifications:
*Brand Name: OSG USA, Inc. *List No.: SHRINK

Description:

Shipping Info:
*Actual Weight - .4500 *Dimensions - Height: 2.70 Length: 4.05 Width: 2.95

$ 580.28

HSK63F 10MM SHRINK FIT HOLDER

Item #: GM76500882
Manufacturer: Lyndex
Mfg #: H63F-SF10-

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$ 303.87

BT40 12MMX200MM GL SHRINK FIT CHUCK

Item #: HA714064612
Manufacturer: Haimer USA LLC
Mfg #: 40.646.12

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - 5.0600

$ 558.80

CAT40 3/4 x 2.56 Power Shrink Fit Chuck

Item #: HA714084534Z36
Manufacturer: Haimer USA LLC
Mfg #: 40.845.3/4

Technical Specifications:
*Bore Diameter: 3/4 *Brand Name: Haimer USA LLC *Gage Length: 2.56 *Model Number: 40.845.3/4Z.36 *Outside Diameter: 1.65 *Shank: CAT40 *Type: Power Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all inductive shrink fit units *Precesion AT3 Tolerance Shank *Balanced to G2.5 at 25,000 RPM or U < 1 gmm *Taper tolerance AT3 *High runout accuracy < 3µ¼m *Low tendency towards vibrationos by optimized outer geometry *Slim desgin at the top *Very rigid shank *Dirt groove in the clamping bore for safe clamping force *Coolant supply fromr ADB *Cool Jet, can be sealed *Made in Germany

Shipping Info:
*Actual Weight - 3.0000

$ 782.11

HSK63 1 1/4 x 4.72 - Shrink Fit Tool Holder

Item #: GM94H63124729
Manufacturer: Parlec
Mfg #: H63A-12SF4

Technical Specifications:
*Bore Diameter: 1-1/4 *Brand Name: Parlec *Gage Length: 4.720 *Model Number: H63A-12SF472-9 *Shank: HSK63A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 3.0000

$ 294.69

BT50-SLK12-105F

Item #: TP348910012
Manufacturer: OSG USA, Inc.
Mfg #: 8910012

Technical Specifications:
*Brand Name: OSG USA, Inc. *List No.: SHRINK

Description:

Shipping Info:
*Actual Weight - 5.0000

$ 725.57

CAT50 50mm x 140mm HD Power Shrink Fit Chuck

Item #: HA71508505067
Manufacturer: Haimer USA LLC
Mfg #: 50.850.50.

Technical Specifications:
*Bore Diameter: 50mm *Brand Name: Haimer USA LLC *Gage Length: 140mm *Model Number: 50.850.50.67 *Outside Diameter: 82mm *Shank: CAT50 *Type: Power Shrink Fit Chuck

Description:
*Precesion AT3 Tolerance Shank *Balanced to G2.5 at 22,000 RPM *Highest Possible Clamping Force *< 3-micron T.I.R. *All functional surfaces precision ground

Shipping Info:
*Actual Weight - 12.0000

$ 1,632.54